HomeMy WebLinkAbout15110121 Building PlansMECHANICAI. &
ELECTRICAL NOTES
1. THE MECHANICAL, ELECTRICAL AND PLUMBING SCOPES OF WORK
ARE �IMITED TO BASIC DESIGN-BUILD ALTERATIONS WHICH ARE OUTLINED
IN THESE PLANS. TNE DESIGN-BUILD CONTRACTORS FOR EACN TRADE
MUST NOTIFY THE ARCHITECT IF THEY FIND THAT THE SCOPE QF WORK
EXCEEDS THE LEVE� OF MECHANICAL, ELECTRICAL OR PLUMBING WORK
INDICATED ON THESE DRAWINGS SO THAT ANY NECESSARY ENGINEERING
CAN OCCUR AND ADDITIONAL PLANS CAN BE FILED, OR IF ADDITIONA�
INFORMATION IS NEEDED IN ORDER TO DO THE WORK IN TNE FIELD. TNE
MECHANICAL, E�ECTRICA� AND PLUMBING DESIGN-BUILD
CONTRACTORS SHA�L COMPLY WITH ALL APPLICABLE STATE AND LOCAL
BUI�DING CODES.
FIRE SUPPRESSION AND FIRE ALARM SYSTEMS SHALL BE INSTALLED BY THE
APPROPRIATE DESIGN-BUILD CONTRACTOR AND MUST COMPLY WITH ALL
APPLICABLE STATE AND LOCAL BUI�DING CODES. FIRE SUPPRESSION
AND FIRE ALARM DESIGN-BUILD CONTRACTORS ARE RESPONSIBLE FOR
COMPLETING AND FI�ING THEIR PLANS AND OBTAINING THEIR PERMITS.
2. MECNANICA� WORK IS �IMITED TO A DESIGN-BUI�D SCOPE AND IS
OUTLINED IN THESE DRAWINGS. NO NEW MAIN MECHANICA�
APPLIANCES OR MAIN EQUIPMENT ARE BEING PROVIDED. ALL
MECHANICAL WORK IS LIMITED TO RELOCATION OF DIFFUSERS AND FLEX
DUCT PER NEW WALL LAYOUT. NO NEW HARD DUCTWORK OR
EQUIPMENT IS BEING ADDED; MECNANICAL CONTRACTOR IS TO NOTIFY
APPLICABLE PARTIES IF ADDITIONAL WORK IS REQUIRED SO THAT
ADDITIONAL PLANS CAN BE FILED AND MUST COMPLY WITH THE INDIANA
MECHANICAL CODE AND ALL OTHER APP�ICABLE CODES.
3. VERIFY NEAT LOADS OF ANY SPECIAL EQUIPMENT IN TNE TENANT
SPACE, AND PROVIDE ADDITIONAL AIR FLOW IF REQUIRED. CONFIRM
WITH OWNER PRIOR TO ANY PURCHASE OF NEW EQUIPMENT. REVISE
ZONING IF REQUIRED. DO NOT DESIGN ANY SINGLE OFFICE SPACE TO BE
ON A SPLIT ZONE UNLESS APPROVED BY BUILDING OWNER/LAND�ORD.
4. RELOCATE AIR-SUPP�Y DIFFUSERS AND RETURN-AIR GRILLES AS
REQUIRED. PROVIDE PROPER AIR SUPPLY FOR DIFFUSERS AND RETURN AIR
FROM RETURN AIR GRILLES. CONTRACTOR IS TO PLACE LOCATION OF
DIFFUSERS AND RETURN AIR GRIL�ES AS REQUIRED BY CODE.
5. POSITION LOCATION OF ALL THERMOSTATS WHERE APPROPRIATE PER
MECHANICAL DESIGN. COORDINATE WITH TENANT AND BUILDING
OWNER FOR FURNITURE PANEL OR OTHER CONFLICTS.
b. ELECTRICAL WORK IS LIMITED TO A DESIGN-BUILD SCOPE AND IS
OUTLINED IN THESE DRAWINGS. A�� E�ECTRICA� WORK IS �IMITED TO
ADDITIONS OR RE�OCATIONS OF ELECTRICAL OUT�ET DEVICES AND
LIGHTING THAT DO NOT EXCEED THE CAPACITY OF THE EXISTING
ELECTRICAL SERVICE IN THE BUI�DING. ELECTRICAL CONTRACTOR IS TO
NOTIFY APPLICABLE PARTIES IF ADDITIONAL WORK IS REQUIRED SO THAT
ADDITIONAL PLANS CAN BE FILED AND MUST COMP�Y WITH ALL
APPLICABLE CODES.
7. COMPLY WITH THE INDIANA ELECTRICAL AND MECHANICAL CODE
AND ALL OTNER APP�ICABLE CODES.
8. SIZE AND CIRCUIT ELECTRICAL POWER ITEMS. PROVIdE OR REUSE
ELECTRICAL POWER AND DATA OUTLETS AS REQUIRED.
9. A�L ELECTRICAL OUTLETS WITHIN b'-0" OF WATER ARE TO BE G.F.C.I.
10. AT EACH PHONE AND DATA JACK, PROVIDE PULL STRING FROM
ABOVE CEILING TO BOX. TENANT'S DATA CONTRACTOR IS RESPONSIB�E
FOR PU�LING CONDUCTORS AND PROVIDING APPROPRIATE TERMINALS
AT FACE PLATE.
1 1. PROVIDE COLORED FACEPLATES FOR ELECTRICAL OUT�ETS &
SWITCHPLATES TO MATCH EXISTING, UN�ESS OTHERWISE NOTED.
ELECTRICIAN TO FIELD VERIFY PRIOR TO PURCHASE.
12. PROVIDE JUNCTION BOXES OR POWER POLES AT WORKSTATIONS
WHERE SHOWN. REFER TO THE P�AN FOR THE APPROPRIATE
DESIGNATIONS. DATA WILL BE RUN BY THE TENANT'S DATA VENDOR.
ELECTRICIAN TO MAKE FINA� CONNECTION FROM WORKSTATION WHIP
TO JUNCTION BOX. THE FURNITURE VENDOR IS TO BE RESPONSIBLE FOR
WIRING THE BASE PANELS OF THE WORKSTATIONS.
13. CONTRACTOR TO COORDINATE WITH TENANT ON WORKSTATION
FURNITURE SPECIFICATIONS TO OBTAIN CIRCUITRY REQUIREMENTS PRIOR
TO RUNNING E�ECTRICA� CONDUITS TO JUNCTION BOXES.
14. NOT USED.
15. VERIFY EXISTING �IGHTING CIRCUITING. SIZE NEW CIRCUITS AS
REQUIRED. PROVIDE NEW OR REVISE EXISTING CIRCUITING FOR NEW
LAYOUT OF �IGHT FIXTURES.
1 b. ENSURE THAT AL� MOUNTING HEIGHTS OF ELECTRICAL DEVICES MEET
A.D.A. REQUIREMENTS.
17. WHERE MULTIPLE SWITCHES ARE SHOWN, PROVIDE (1) GANG BOX
WITH A SINGLE COVERPLATE.
18. CENTER CEILING ELEMENTS IN CEILING TILES, INCLUDING RECESSED
DOWNLIGHTS, SMOKE DETECTORS, SPRINKLER HEADS, AND EXIT SIGNS
UN�ESS OTHERWISE NOTED.
19. PROVIDE EMERGENCY LIGHTING IN TENANT SPACE AS REQUIRED PER
NEMA AND IBC. EMERGENCY BATTERY PACKS OR LIGHTS CONNECTED
TO AN EMERGENCY POWER SOURCE ARE REQUIRED IF THE SPACE
CONTAINS 50 PERSONS OR MORE. FIXTURES SHOWN ON P�AN ARE FOR
REFERENCE ONLY.
20. PROVIDE ALARM NOTIFICATION APPLIANCES (HORNS/STROBES),
EMERGENCY SPEAKERS, SMOKE DETECTORS, FIRE PULLS, AND ANY OTHER
REQUIRED ALARM & DETECTION SYSTEMS AS NECESSARY TO MEET ALL
APPLICABLE CODES (INTERNATIONA� BUILDING CODE, INTERNATIONAL
FIRE CODE, NFPA).
21. COORDINATE WITH THE OWNER/TENANT PRIOR TO INSTALLATION OF
FIRE DETECTION DEVICES REGARDING ALL DEVICE LOCATIONS TO AVOID
CONFLICT WITH FEATURE WAL�S (CONFERENCE ROOMS AND RECEPTION
AREAS) AND TENANT-INSTA�LED ITEMS (I.E. PRESENTATION BOARDS, A/V
EQUIPMENT AND PROJECTION SCREENS).
22. IF REQUIRED, AND AS NECESSARY, PROVIDE NEW BALLASTS AND
LAMPS IN AL� �IGHTS IN EXISTING SPACES. CONSULT WITH �ANDLORD.
GENERAL PROJECT NOTES
1. AL� WORK SHA�� COMP�Y WITH THE REQUIREMENTS OF THE EXISTING BUI�DING 18. EXPEDITE PREPARATION AND SUBMITTAL OF ALL SHOP DRAWINGS TO ALLOW
CONSTRUCTION TYPE AS DEFINED BY SECTION 601 OF THE INDIANA BUILDING CODE . SUFFICIENT TIME FOR CHECKING, APPROVAL, ORDERING, FABRICATION, AND
DELIVERY OF MATERIA�S AND EQUIPMENT.
2. ALL WORK SHALL COMPLY WITH THE REQUIREMENTS OF ALL APPLICABLE STATE
AND LOCAL BUILDING CODES. CONTRACTORS ARE RESPONSIBLE FOR VERIFYING 19. ENSURE THAT A�L MATERIALS AND LABOR ARE IN ACCORDANCE WITH THE BEST
THE CURRENT APPLICABLE BUILDING CODE(S) FOR THEIR RESPECTIVE SCOPE OF QUA�ITY STANDARDS OF EACN RESPECTIVE TRADE WHETHER SPECIFIED OR NOT. THE
GENERAL CONTRACTOR IS RESPONSIB�E FOR ENS RING THAT ALL WORK IS IN
WORK. U
ACCORDANCE WITN A�L FEDERAL, STATE, AND �OCAL BUILDING CODES, AND
3. CONTRACTOR(S) SHALL VISIT THE WORK SITE PRIOR TO COMMENCEMENT. TNE STANDARDS FOR GENERA�, MECHANICA�, AND ELECTRICAL CONSTRUCTION.
DRAWINGS CONTAINED HEREIN MAY NOT BE ALL INCLUSIVE OF EXISTING
CONDITIONS OR NEW WORK REQUIREMENTS. CONTRACTOR(S) SHA�� MAKE
20. ALL DETAI�S MATERIALS AND INSTALLATIONS ARE SUBJECT TO FIRST APPROVAL BY
THEMSELVES FAMILIAR WITH THE WORK SITE IN THE FIELD IN ORDER TO BE FU��Y SCHOTT DESIGN, INC., AND FINAL APPROVAL BY THE OWNER.
AWARE OF THE REQUIREMENTS OF THE SCOPE OF WORK.
21. REVIEW AND COORDINATE ALL NEW WORK AND EXISTING CONDITIONS WITH ALL
4. FIELD VERIFY ALL DIMENSIONS AND MEASUREMENTS. INFORM THE GENERAL OTHER TRADES. FIELD WORK ORDERS & CHANGE ORDERS WI�� NOT BE APPROVED
CONTRACTOR BEFORE BEGINNING ANY CONSTRUCTION IF EXISTING CONDITIONS FOR ANY CONDITIONS OR CONF�ICTS THAT COULD HAVE BEEN ACCOUNTED FOR BY
PREVENT OBTAINING RESU�TS AS SHOWN OR SPECIFIED. DO NOT SCA�E DRAWINGS. TNE BIDDER DURING PRE-BID FIELD INSPECTION AND AFTER AWARD OF CONTRACT.
NOTED DIMENSIONS TAKE PRECEDENCE.
22. FURNITURE, OFFICE EQUIPMENT, OFFICE PARTITION SYSTEMS, REFRIGERATORS,
5. VERIFY EXISTING CONDITIONS INDICATED ON THE DRAWINGS AND REPORT ANY VENDING MACHINES, AND OTHER SIMILAR ITEMS SHOWN DASNED ON THIS DRAWING
DISCREPANCY TNROUGN THE GENERAL CONTRACTOR TO SCHOTT DESIGN, INC. AND NOT ATTACHED TO THE BUILDING ARE FOR REFERENCE ONLY AND ARE NOT TO
BE PROVIDED AS PART OF THE WORK UNLESS SPECIFICALLY STATED TO BE PROVIDED.
6. THE GENERAL CONTRACTOR SHALL COORDINATE WITH THE OWNER REGARDING
ALL ON-SITE ACTIVITIES; SUCN AS, BUT NOT LIMITED TO, WORK SCHEDULE, MATERIALS 23. REPAIR GYPSUM WAL�BOARD WHERE DEMO�ITION HAS OCCURRED AT
STORAGE AND NANDLING, DE�IVERIES, ACCESS TO THE WORK SITE, TRAFFIC REMAINING WAL�S. REPAIR ANY GYPSUM BOARD DAMAGED BY DEMOLITION.
CONTRO�, AND BUILDING/PUB�IC SAFETY PROCEDURES DURING CONSTRUCTION. PROVIDE EXPANSION JOINTS IN DRYWALL WHERE NEW WALLS MEET OR ADJOIN TO
THE CONTRACTOR SNAL� ALSO COORDINATE WORK "BY OTHERS" WITH HIS/HER OWN EXISTING CORE WALLS.
ACTIVITIES AS NECESSARY TO EXECUTE THE OVERALL PROJECT SCOPE.
24. PATCH ALL GYPSUM WAL�BOARD AT AREAS OF ELECTRICAL, DATA AND SWITCH
7. THE GENERAL CONTRACTOR SHA�L COORDINATE WITH THE LANDLORD, DAILY DEVICES BEING REMOVED. PATCH HOLE WITH DRYWALL, TAPE, SPACKLE AND
WORKING HOURS, WEEKEND HOURS AND HOURS THAT MAY BE WORKED PRIOR TO PREPARE FOR FINISH.
AND DURING HOLIDAYS. �AND�ORD RESERVES THE RIGHT TO RESTRICT
CONSTRUCTION TO NIGHTS AND WEEKENDS WHEN THAT CONSTRUCTION IS DEEMED 25. ALL EQUIPMENT AND/OR FIXTURES SHALL BE INSTALLED IN STRICT ACCORDANCE
TO INTERFERE WITH THE OPERATIONS OF ADJACENT TENANTS. WITH TNE MANUFACTURER'S RECOMMENDATIONS OR INSTRUCTIONS.
8. FOR THOSE ITEMS TO BE ORDERED REQUIRING LEAD TIME, THE CONTRACTOR 26. EXECUTE A THOROUGH FINAL C�EAN AND INSPECTION OF THE SPACE UPON
SHALL COORDINATE THE PROJECT SCHEDULE ACCORDINGLY AND COMMUNICATE COMPLETION OF THE PROJECT. ALL SURFACES, FIXTURES, AND EQUIPMENT SHALL BE
TO THE OWNER, TENANT, AND SCHOTT DESIGN WHEN DECISIONS MUST BE RENDERED C�EAN, AND THE SPACE SHALL BE TURNED OVER TO THE OWNER IN A CONDITION
IN ORDER FOR THE CONTRACTOR TO MEET THE PROJECT SCHEDULE. THE OWNER, THAT REPRESENTS THE HIGHEST �EVEL OF CARE AND PROFESSIONALISM. ENSURE ALL
TENANT, OR DESIGNER/ARCNITECT IS NOT RESPONSIB�E FOR DELAYS RESU�TING GENERAL CONTRACTOR INSTA�LED APPLIANCE S WORK & DO NOT LEAK.
FROM THE CONTRACTOR'S FAILURE TO COMMUNICATE MATERIAL LEAD TIMES.
27. PROVIDE TO THE OWNER ALL OPERATION AND/OR MAINTENANCE MANUALS, OR
9. SUBSTITUTIONS FOR SPECIFICALLY NAMED PRODUCTS WILL NOT BE ALLOWED INSTRUCTIONS FOR ALL EQUIPMENT AND SYSTEMS AT THE COMPLETION OF THE
WITHOUT PRIOR APPROVAL FROM THE DESIGNER. SUBMIT REQUESTS FOR PROJECT.
SUBSTITUTIONS WITH APPROPRIATE SUPPORT INFORMATION TO THE DESIGNER.
ALLOW REASONABLY SUFFICIENT TIME FOR TNE DESIGNER TO REVIEW THE REQUEST 28. ALL PLAN DIMENSIONS ARE FROM FACE OF EXISTING FINISH TO FACE OF NEW
AND RENDER A DECISION. GYPSUM BOARD WA�L, OR FACE TO FACE OF NEW GYPSUM BOARD WA��. DO NOT
SCALE DRAWINGS. WRITTEN DIMENSIONS GOVERN.
10. SCHOTT DESIGN, INC., SHALL NOT HAVE CONTRO� OVER, OR BE IN CHARGE OF,
AND SHALL NOT BE RESPONSIBLE FOR A CONTRACTOR'S CONSTRUCTION MEANS, 29. CONTRACTOR TO PROVIDE AN AL�OWANCE FOR CLEANING EXISTING WINDOW
METNODS, SCNEDULES, SEQUENCES, OR SAFETY. THE CONTRACTORS SHA�� BE BLINDS. REPLACE ANY DAMAGED OR MISSING WINDOW B�INDS WITH NEW TO MATCH
RESPONSIBLE FOR MAINTAINING A SAFE ENVIRONMENT FOR WORKERS AND THE BUI�DING STANDARD.
PUBLIC AT ALL TIMES.
30. THE GENERA� CONTRACTOR SHAL� BE RESPONSIB�E FOR VERIFYING THE
1 1. THE GENERA� CONTRACTOR SHA�� ESTABLISH WITH THE LAND�ORD C�EANUP REQUIREMENTS REGARDING �OCAL P�AN REVIEW, PERMITS, INSPECTIONS, AND FEES.
PROCEDURES AND GUIDELINES TO BE FOLLOWED ON A DAILY BASIS IN ORDER TO THE GENERAL CONTRACTOR SHA�L BE RESPONSIBLE FOR SUBMITTING A�� REQUIRED
CONDUCT BUSINESS IN A SAFE AND C�EAN ENVIRONMENT. DRAWINGS AND SUPPORTING DOCUMENTS TO THE LOCA� BUILDING OFFICIA�
AND/OR PERMIT DEPARTMENT. A�L REQUIRED LOCAL PERMIT FEES SHALL BE PAID BY
12. THE GENERAL CONTRACTOR SHA�L COORDINATE WITH THE �ANDLORD, AN TNE GENERAL CONTRACTOR UNLESS STIPULATED OTHERWISE IN THE
AREA FOR STAGING OF CONSTRUCTION MATERIALS, EQUIPMENT, DUMPSTER AND OWNER/CONTRACTOR AGREEMENT.
PARKING CONSTRUCTION AND DELIVERY VENICLES. THE USE OF EXISTING REST ROOM
FACI�ITIES SHALL BE APPROVED BY TNE �ANDLORD. ONLY THOSE DESIGNATED AREAS 31. FIRE SEA� ALL PENETRATIONS TNROUGH RATED WA��S, FLOORS, AND CEILINGS
SHAL� BE USED BY CONSTRUCTION CREWS. WITH APPROVED FIRE-RATED CAULK AS DIRECTED BY LOCAL JURISDICTIONS.
13. TNE GENERAL CONTRACTOR SNA�L USE DUST PARTITIONS TO MINIMIZE 32. WNERE STRUCTURAL BEAMS, DUCTWORK, ETC. PENETRATE SOUND OR FIRE RATED
DISTURBANCES OF DAI�Y TENANT OPERATIONS DURING DEMOLITION AND PARTITIONS, GYPSUM WALLBOARD WAL� TO BE SCRIBED TO FIT TIGHT, CAULKED AND
CONSTRUCTION WORK. DUST PARTITIONS SHALL BE CONSTRUCTED OF 2X4 WOOD FIRE DAMPERED IF REQUIRED.
STUDS @ 24"O.C., INSULATION AND b MIL VAPOR BARRIER ON EACH SIDE.
33. CONTRACTOR TO ALLOW FOR UNLEVEL FLOOR CONDITIONS. ALL EXISTING FLOOR
14. CONTACT THE DESIGNER IMMEDIATELY IF, IN THE FIELD, CONFLICTS ARE AND WALL SUBSTRATES SHALL BE LEVE�ED AND PATCHED AS REQUIRED TO RECEIVE
DISCOVERED BETWEEN COMPONENTS OF DIFFERENT SYSTEMS THAT PREVENT THE NEW CONSTRUCTION AND FINISHES. ADJUST DOORS AND FRAMES AS REQUIRED.
INSTA��ATION OF THOSE COMPONENTS AS INDICATED ON THE DRAWINGS. (I.E.
WHERE EXISTING MECHANICAL DUCTWORK MAY PREVENT THE INSTALLATION OF �' ���CAS EWO R K N OTES
�IGHTING FIXTURES AS INDICATED ON THE CEILING PLAN).
15. SCHOTT DESIGN, INC., IS NOT RESPONSIBLE FOR THE IDENTIFICATION, DISCOVERY,
PRESENCE, HANDLING, REMOVA�, DISPOSAL OF, OR EXPOSURE TO ANY PERSONS, 1. CASEWORK AND MILLWORK GENERALLY INDICATED ON THESE DRAWINGS ARE TO BE
THAT OF HAZARDOUS MATERIA�S IN ANY FORM ON THE PROJECT SITE. PROVIDED UNDER THE GENERAL CONTRACT.
1 b. PROVIDE FIRE-TREATED WOOD BLOCKING IN WALLS FOR ALL WALL HUNG ITEMS 2. UNLESS INDICATED OTHERWISE, COMPLY WITH ARCHITECTURAL WOODWORK INSTITUTE
INCLUDING MILLWORK, WAL� STOPS, CABINETRY, ETC. (A.W.I.) CURRENT STANDARDS FOR CUSTOM GRADE WOODWORK.
17. SHOP DRAWINGS OR CATALOG CUTS MUST BE SUBMITTED TO SCHOTT DESIGN, 3. FURNISH SHOP DRAWINGS ON A�L MIL�WORK AND CASEWORK FOR APPROVAL BY THE
WC. FOR APPROVA� ON ALL MATERIALS OR ITEMS WHERE TNE CONTRACTOR TENANT AND SCHOTT DESIGN PRIOR TO FABRICATION.
CHOOSES TO DEVIATE FROM WHAT IS SHOWN ON THE DRAWINGS, OR IF THE
DRAWINGS DO NOT INDICATE A SPECIFIC MANUFACTURER OR MODE� NUMBER. 4. WHERE CASEWORK AND MILLWORK ARE TO BE INSTA��ED, VERIFY A�� DIMENSIONS ON
F I N 1 S H N OT ES P�ANS AGAINST DIMENSIONS OF AS-BUILT CONDITIONS IN FIELD. REPORT ANY
DISCREPANCIES TO SCHOTT DESIGN THROUGH THE GENERAL CONTRACTOR. MAKE
ADJUSTMENTS TO CASEWORK AND MIL�WORK TO FIT FIELD CONDITIONS UNLESS DOING SO
1. AL� FINISNES SHA�L COMPLY WITH CHAPTER 8(INTERIOR FINISNES) OF THE WI�L SIGNIFICANTLY ALTER THE INTENT OF THE DESIGN SHOWN ON TNE DRAWINGS.
INDIANA BUI�DING CODE FOR CLASS A FIRE RATINGS. 5. VERIFY FINISHES (LAMINATE, VENEER, STAINS, ETC.) ON THE SECTIONS AND ELEVATION
2. FOR ALL NEW DRYWAL� INSTAL�ATIONS, INSTALL AS RECOMMENDED BY THE pRAWINGS WITH FINISHES INDICATED ON THE FINISH PLAN/SCHEDULES. IMMEDIATELY
GYPSUM ASSOCIATION. (SUCN AS, CONTROL JOINTS, FINISH �EVELS, FASTENERS, REPORT ANY DISCREPANCIES TO SCHOTT DESIGN THROUGH THE GENERA� CONTRACTOR.
TAPING DETAILS, CORNER BEADS, ETC.) b. REFER TO MILLWORK SECTIONS & E�EVATIONS . UNLESS OTHERWISE SHOWN, PLASTIC
3. ALL NEW P�ATES AND SWITCHES ARE TO MATCH EXISTING COLOR, UNLESS LAMINATE CLAD, COUNTERTOPS WITH 4" BACKSP�ASHES WHERE INDICATED. BACKSPLASNES
OTNERWISE NOTED. REMOVE ALL PLATES BEFORE PAINTING AND REATTACH TO BE FIE�D APP�IED.
AFTERWARDS. CONTRACTOR TO CONFIRM EXISTING COLOR PRIOR TO PURCHASING �. REFER TO MILLWORK SECTIONS & ELEVATIONS FOR CABINETRY SPECIFICATIONS (CUSTOM
NEW. P�ASTIC LAMINATE OR PRE-MANUFACTURED STOCK CABINETRY).
4. ALL AREAS RECEIVING PAINT ARE TO RECEIVE PRIMER COAT AND TWO (2) FINISH g. TO PROVIDE BLOCKING IN WALLS FOR A�� MIL�WORK, WA�L STOPS, HARDWARE, AND
COATS. CABINETRY WNERE SPECIFIED. ALL WOOD BLOCKING TO BE FIRE RATED.
5. FOR CHANGE IN FLOOR FINISH MATERIAL, PROVIDE TRANSITION STRIP AT DOOR
OPENINGS TO MATCH VINY� BASE COLOR (IE.: WHERE VCT MEETS CARPET).
6. WHERE LIMITS OF WORK ARE SNOWN, OTHER INCIDENTAL WORK LIKE PAINTING
WHERE NEW OUTLETS HAVE BEEN INSTAL�ED, IS CONSIDERED PART OF TNE SCOPE
OF WORK. PROVIDE A COMPLETE AND FINISHED PRODUCT READY FOR TENANT
AND BUI�DING OWNER.
7. REFINISH SURFACES TO MATCH EXISTING WHERE DEMO�ITION HAS OCCURRED.
8. WHERE PHONE BOARD IS PROVIDED, PAINT BOARD WITH FIRE RETARDANT PAINT
TO MATCH ADJACENT WALL FINISH.
DEMOLITION NOTES
1. COORDINATE DEMOLITION WITH NEW WORK CONSTRUCTION DRAWINGS IN ORDER TO 7. REMOVE ALL ELECTRICAL OUT�ETS AND CONDUCTORS AS REQUIRED OR INDICATED. SA�VAGE
DETERMINE THE FULL EXTENT OF NECESSARY DEMOLITION. SA�VAGE REUSAB�E ITEMS. OUTLETS FOR REUSE IN NEW CONSTRUCTION.
2. NO STRUCTURA� OR �OAD-BEARING CONSTRUCTION SHA�L BE REMOVED, DEMOLISHED, OR 8. REFER TO DEMOLITION PLAN AND REFLECTED CEILING PLAN LEGEND FOR CEILING GRID INSTRUCTIONS.
DAMAGED AS A RESU�T OF THIS PROJECT UNLESS SPECIFICALLY NOTED OTHERWISE ON THE
DRAWIN PR TE T ALL EXI TIN TR T RA� MEMBER D RIN DEM LITI N N TR TI N. 9. USE CARE TO PROTECT EXISTING BUILDING ELEMENTS INDICATED ON THE DRAWINGS TO REMAIN SUCH
GS. O C S G S UC U S U G O O ICO S UC O
THE CONTRACTOR SHA�� VERIFY IN THE FIELD, PRIOR TO DEMOLITION, THAT ALL ITEMS NOTED TO BE AS, BUT NOT �IMITED TO, EXISTING CEI�ING GRID, TILES, FIRE SUPPRESSION EQUIPMENT, DIFFUSERS, �IGHT
DEMOLISHED ARE NOT STRUCTURAL CONTACT SCHOTT DESIGN IMMEDIATELY IF TNE FIXTURES, EQUIPMENT, CASEWORK, AND FINISHES. TNE CONTRACTOR SHALL REPLACE AND/OR REPAIR, AT
NT A T IN THE FIEL PE T THAT AN ITEM N TED F R DEM LITI N PPEAR T BE TNE CONTRACTOR'S COST ANY SUCH ELEMENTS DAMAGED DURING CONSTRUCTION THAT COULD HAVE
CO R C OR(S) D SUS C O O O O A S O
STRUCTURAL OR OTHERWISE LOAD-BEARING. BEWARE OF STRUCTURAL COLUMNS AND/OR BEAMS OTHERWISE BEEN REASONABLY PROTECTED AND MAINTAINED IN GOOD CONDITION FOR THE OWNER'S
THAT MAY BE CONCEALED BEHIND FINISHES THAT ARE NOTED FOR REMOVAL. EXERCISE CAUTION USE IN THE PROJECT.
WHEN DEMOLISHING BUILDING FINISHES OR PARTITIONS ADJACENT TO OR AROUND STRUCTURAL
MEMBERS. THE CONTRACTOR IS SO�E�Y RESPONSIBLE FOR INADVERTENT DAMAGE TO THE 10. PER TNE INDIANA ELECTRICAL CODE (SPREAD OF FIRE OR PRODUCTS OF COMBUSTION) REMOVE ALL
BUI�DING STRUCTURAL SYSTEM. ACCESSIBLE PORTIONS OF ABANDONED CABLES AND WIRING INCLUDING BUT NOT LIMITED TO: DATA
WIRING, COMMUNICATIONS WIRING, FIRE ALARM CABLES, AUDIO CABLES, COAXIAL CABLES, FIBER OPTIC
3. PRIOR TO DEMO�ITION, COORDINATE WITH THE OWNER IN THE FIELD REGARDING THOSE ITEMS CABLES/RACEWAYS, AND PLTC CABLES. REFER TO SECTION 300.21.
THAT MAY BE REMOVED AND REUSED. CONFIRM WITH THE OWNER THOSE ITEMS THE OWNER
CHOOSES TO RETAIN FROM DEMOLITION, AND THOSE ITEMS OF WHICH THE OWNER CHOOSES TO 1 1. WHERE FIXTURES OR EQUIPMENT ARE REMOVED FROM ANY ELECTRICAL, PLUMBING, MECHANICAL,
DISPOSE. COMP�Y WITH THE OWNER'S REQUESTS. OR VOICE/DATA SYSTEMS, ALL REMAINING TERMINATIONS SNALL BE CLOSED AND PROTECTED IN STRICT
ACCORDANCE WITH INDUSTRY STANDARDS AND GOVERNING SAFETY REGU�ATIONS OR PROCEDURES.
4. WHERE EQUIPMENT, FIXTURES, OR FINISHES ARE MOVED FROM ANY OTHER PART OF THE MARK, LABE�, OR FLAG A�L TERMINATED SYSTEMS FOR FUTURE REFERENCE. CONTRACTOR TO PROVIDE
BUILDING TO BE REUSED IN THE PROJECT AREA, THE CONTRACTOR SHALL INCLUDE IN THEIR SCOPE AN "AS-BUILT" SET INDICATING THE LOCATION OF ALL PERMANENTLY ABANDONED SYSTEMS.
OF WORK ANY NECESSARY PATCHING OR REPAIRING OF THE REMAINING AREAS FROM WHERE TNE
ITEMS WERE RELOCATED, UN�ESS OTHERWISE DIRECTED BY OWNER. 12. GENERAL CONTRACTOR TO PROVIDE RECYCLING COSTS TO TNE BUILDING OWNER/LAND�ORD ON
ALL ITEMS BEING DEMO�ISHED, SUCH AS, METAL STUDS, DRYWALL, CARPET, CEILING TILES, DOORS,GLASS,
5. REMOVE ALL EXISTING WALLS AND DOORS WHERE INDICATED BY NOTE, SYMBOL, OR DASNED AND CABINETI2Y. �
�INES. NOTE THAT SOME ITEMS HAVE NOT BEEN SHOWN QN DEMOLITION P�AN. VISIT AREA OF
WORK TO ASSURE EXTENT OF DEMO�ITION.
6. REMOVE ALL CARPET, VINYL BASE, VCT, WA�L FABRIC, AND ANY OTHER FINISHES AS REQUIRED
FOR NEW CONSTRUCTION. CONTRACTOR TO FIELD VERIFY EXISTING CONDITIONS. REFER TO FINISH
PLAN/SCHEDULE FOR CLARIFICATION OF EXISTING FINISHES TO REMAIN.
FIRE PROTECTION NOTES
THE FOL�OWING NOTES APPLY ONLY IN EXISTING SPRINKLERED FACILITIES.
1. FIRE PROTECTION WORK IS TO BE PROVIDED BY DESIGNiBUILD
SERVICES UNDER THE GENERAL CONTRACT. PROVIDE A COMP�ETE,
WORKING SYSTEM. SCNOTT DESIGN, INC., IS NOT RESPONSIBLE FOR THE
DESIGN, INSTAL�ATION, OR RENOVATION OF THE FIRE SPRINK�ER SYSTEM.
2. THE DESIGN/BUILD CONTRACTOR SHALL COMP�Y WITH TNE INDIANA
BUILDING CODE, THE INDIANA FIRE CODE, AND A�� OTHER APPLICAB�E
�AWS, CODES, RULES AND REGU�ATIONS THAT APPLY TO DESIGN AND
INSTALLATION OF FIRE SPRINKLER/FIRE SUPPRESSION SYSTEMS.
3. THE FIRE PROTECTION CONTRACTOR SHALL GENERATE A�� REQUIRED
DRAWINGS, AND SHAL� FILE TNOSE DRAWINGS, AND RELATED
DOCUMENTS, WITH THE STATE AND �OCAL AUTHORITIES HAVING
JURISDICTION OVER THE PROJECT.
4. PROVIDE NEW OR RE�OCATE EXISTING SPRINKLER HEADS AS
REQUIRED. PROVIDE MISSING COVER/ESCUTCHEON PLATES FOR
SPRINKLER HEADS WHERE APPLICAB�E. FIELD VERIFY EXISTING
CONDITIONS PRIOR TO THE START OF WORK.
5. FIRE EXTINGUISHERS: CONTRACTOR TO ENSURE ALL NEW AND
EXISTING FIRE EXTINGUISNERS ARE INSTALLED ACCORDING TO NFPA 10.
COORDINATE WITH OWNER/LAND�ORD ON EXTINGUISHER TYPE AND
HOUSING. MAXIMUM TRAVE� DISTANCE OF 75 FEET FROM ANY PQINT TO
A VISIBLE EXTINGUISHER.
9. SUBMIT FINISH SAMPLE OF MI��WORK (STAINED OR PAINTED AS SPECIFIED) TO DOC 11M E NT AP P ROVAL
SCHOTT DESIGN FOR REVIEW AND APPROVA� PRIOR TO TNE FINISHING PROCESS OF
ALL MILLWORK.
10. REFERENCE INTERIOR ELEVATION & SECTIONS WNERE PROVIDED FOR TENANT�C�IENT, UPON S
ADDITIONA� FINISH INFORMATION.
1 1. ALL PAINTS AND ADNESIVES/SEALANTS SHALL HAVE LOW VOC CONTENT.
12. ALL ADHESIVES/SEA�ANTS TO BE USED AS RECOMMENDED BY PRODUCT ' TENANT/CLIENT COMANY NAME
MANUFACTURER. '
KEY PLAN - 1ST FLOOR
NOT TO SCAI.E
NOT TO SCALE
�REA
WORK
1►1
INDEX OF DRAWINGS
T1 1 1 COVER SHEET AND GENERAL PROJECT NOTES
L100 �IFE SAFETY PLAN
Al 1 1 DEMOLITION PLAN / ARCHITECTURAL FLOOR PLAN
A121 ELECTRICAL PLAN / REFLECTED CEILING PLAN
A21 1 FINISH P�AN / DOOR SCHEDULE / INTERIOR DETAILS
�;�i
, .�
. �. '
,£
�
r�{Itff' _''
.i;
�
��Zttz ,ctti�
��
�sn.
�
�i(;'� t{#y�1rLr� cti,�tittiti�fr${r223St��tS,t�.�.
x,
+S}1$;f f j4s:
� 2h
$}
1".
4zi. rl7�ti'
�,#;�fi,1t?��ttY);�t�}��3t�i�l��ii�
�
��� ��< �
f
�,� ,� �,r�'
o �
� O
� � � � �
_ � � �
c i Z � 'cn
� � �
�; �- vi � �
i; � Q t� O
;w �
i � � U
O � '^
v' � Q 3
�- � 3
�
i,, _
3
THIS DRAWING, AND THE IDEAS,
DESIGNS AND CONCEPTS CONTAINED
HEREIN, ARE THE EXCLUSIVE
INTE�IECTl1AL PROPERTY OF SCHOTT
DESIGN, INC., AND ARE NOT TO BE
USED OR REPRODUCED IN WHOLE, OR
IN PART, WITHOUT THE WRITTEN
CONSENT OF SCHOTT DESIGN.
SSUE
DATE � DESCRIPTION
11.12.15 CONSTRUCTION ISSUE
EVISIONS
DATE DB DESCRIPTION
11.02.15 AM PLAN REV
PROJECT NUMBER
2015.307
• ! � :
:
1 ST FLOOR
COVER SHEET AND
GENERAL NOTES
2
3
4
5
6
7
8
9
10
11
12
13
14
15
CODE SUMMARY
SCOPE OF WORK OFFICE REMODEL OF PREVIOUS�Y BUILT-OUT OFFICE SPACE
PREVIOUS USE OF SPACE B(USINESS)
OCCUPANCY CLASSIFICATION B(USINESS)
CHANGE OF OCCUPANCY CLASS? NO
TOTAL BUILDING AREA 38,897 SF/FLOOR X 5 STORIES = 194,485 SF
TOTAL PROJECT AREA 3,293 SF
OCCUPANCY CALCU�ATIONS SPACE TYPE AREA SF PER OCCUPANT OCCUP LOAD
GEN. OFFICE 3,293 SF 100 33
TOTAL OCCUPANTS IN PROJECT AREA 33
NUMBER OF REQUIRED EXITS 1
SPRINKLER SYSTEM (YES/NO) YES - EXISTING TO REMAIN
TOTA� AREA OF ACCESSORY USES 0 SF
TOTAL AREA ON THE FLOOR 38,897 SF
ACCESSORY AREA EXCEEDS 10% NO
FIRE WA��S, AND/OR OCCUPANCY N/A
SEPARATIONS (IF REQUIRED)
ASHRAE 90.1 SUMMARY REQUIREMENTS WI�L BE MET (SEE A121)
BUILT BEFORE 1978? NO
�
EP EXISTING ELECTRICAL PANEL LOCATION
EX EXISTING EXIT
FE FIRE EXTINGUISHER
� EXIT SIGN
- - - TRAVEL DISTANCE
NIGHT LIGHT/EMERGENCY I.IGHTING
NLEL iNiGHT LIGHTS ARE HOOKED UP TO
BUILDINGS EMERGENCY GENERATOR)
I.IFE SAFETY NOTES
1. PROVIDE EMERGENCY �IGHTING IN TENANT SPACE AS REQUIRED PER
NEMA AND IBC. EMERGENCY BATTERY PACKS OR �IGHTS
CONNECTED TO AN EMERGENCY POWER SOURCE ARE REQUIRED IF
THE SPACE CONTAINS 50 PERSONS OR MORE. FIXTURES SHOWN ON
P�AN ARE FOR REFERENCE ONLY.
2. PROVIDE ALARM NOTIFICATION APPLIANCES (HORNS/STROBES),
EMERGENCY SPEAKERS, SMOKE DETECTORS, FIRE PULLS, AND ANY
OTHER REQUIRED A�ARM & DETECTION SYSTEMS AS NECESSARY TO
MEET AL� APPLICABLE CODES (INTERNATIONA� BUILDING CODE,
INTERNATIONA� FIRE CODE, NFPA).
3. FIRE PROTECTION WORK IS TO BE PROVIDED BY DESIGN/BUILD
SERVICES UNDER THE GENERAL CONTRACT. PROVIDE A COMPLETE,
WORKING SYSTEM. SCHOTT DESIGN, INC., IS NOT RESPONSIBLE FOR
THE DESIGN, INSTAL�ATION, OR RENOVATION OF THE FIRE SPRINKLER
SYSTEM.
4. THE FIRE PROTECTION CONTRACTOR SNALL GENERATE ALL REQUIRED
DRAWINGS, AND SHALL FI�E THOSE DRAWINGS, AND RE�ATED
DOCUMENTS, WITH THE STATE AND LOCAL AUTHORITIES NAVING
JURISDICTION OVER THE PROJECT.
5. FIRE EXTINGUISHERS: CONTRACTOR TO ENSURE A�� NEW AND
EXISTING FIRE EXTINGUISHERS ARE INSTALLED ACCORDING TO NFPA
10. COORDINATE WITH OWNER/LANDLORD ON EXTINGUISHER TYPE
AND HOUSING. MAXIMUM TRAVEL DISTANCE OF 75 FEET FROM ANY
POINT TO A VISIBLE EXTINGUISHER.
0
EX
�� •
L1. REFER TO SHEET A1 1 1 FOR WA�L TYPE AND CONSTRUCTION DETAILS
L2. EXISTING COMMON CORRIDOR TO REMAIN. EXISTING EXIT SIGNS, FIRE
PUL�S, FIRE EXTINGUISHERS, A�ARM NOTIFICATION APPLIANCES TO
REMAIN. RELOCATE EXISTING EXIT SIGNS, FIRE PULLS, FIRE
EXTINGUISNERS AND ALARM NOTIFICATIONS AS REQUIRED TO MEET
A�� �OCA� AND STATE CODES.
EX
� AREA NOT IN CONTRACT
❑ AREA OF WORK
. � .
0 4' 8' 16'
��� !
x
� , �< <
£
. �. {
1�5 r� „i
i
�
}i�att;;. �
, �
r � 4
t�r .,, rrfl�'+ �
Y ,t x
r,
,..,,,;
nsy`4{r�: xtr�t�r#4?P� 71.;f..,.�< �
,�� �,,, �
� � r`i `
� } ¢rttt�4f, }
f���i�s����€t���f��;7fr �
n
i
,�,.,- �r��;. �
�r,� .r, ���
O �
0
� � O �
� � �
f� Z � �N
- I� N
� ,vi � �
�` Q� o
W � � U
Q � N
d- � � 3
� 3
THIS DRAWING, AND THE IDEAS,
DESIGNS AND CONCEPTS CONTAWED
NEREIN, ARE THE EXC�USIVE
INTELLECTUAL PROPERTY OF SCHOTT
DESIGN, INC., AND ARE NOT TO BE
USED OR REPRODl10ED IN WHOLE, OR
IN PART, WITHOl1T THE WRITTEN
CONSENT OF SCHOTf DESIGN.
N
c�
O
�O
�"
Z
.
W
�
�
Q
U
>SUE
DATE � DESCRIPTION
11.12.15 CONSTRUCTION ISSUE
��►���j ►`�
DATE DB DESCRIPTI�
11.02.15 AM FLAN REV
+����J�N H 8 �y�'�
� ��c..�°°F,C,\STE�� �F ,
��
� �0.
�z AR10700017 �,!
F` STATE OF �v
. ;
'�_ /., _/Am � �e\A_ .'� �
-��p� v,.�+a���� ���
���� FRED P�� ,��.
���, , /llllill`1`,�
R`
PROJECT NUMBER
2015.307
• � � :
1 ST FLOOR
LIFE SAFETY
DEMOLITION LEGE�D
EXISTING TO BE REMOVED EXISTING TO REMAIN
______ WALL
WALL
_ _-- PARTIAL HEIGHT WALL ' PARTIAL HEIGHT WALL
c/ � DOOR AND FRAME ,� DOOR AND FRAME
��
-}-�- WINDOW / SIDELIGHT ' � � WINDOW / SIDELIGHT
-� �- CEILING GRID AND
-1I I TILES, 2'x4'
- --- �r-
�i �i i �� CEILING GRID AND
�__t__�� TILES, 2'x2'
r-�
� �� � SUPPLY AIR DIFFUSERS '�
�_y
__=_=�
�� —' �� LIGHT FIXTURE, '
�� __ �� F�UORESCENT, 2'x4' '
�-1 �IGHT FIXTURE, '
�� __ �� F�UORESCENT, 2'x2' '�
�� LIGHT FIXTURE, CAN '�
�-�-� �-+ �IGHT FIXTURE, TRACK '
�c� �IGHT FIXTURE, SCONCE��
LIGHT FIXTURE, '
�-�7 PENDANT ����
� �IGHT SWITCN
��y EXIT LIGHT '�
�`� ��°� ELECTRIC OUTLET(Sj '�
�B� 0� ��� ��
DATA OR
��� COMMUNICATION
OUTLET
NOTE: EXISTING FIXTURES THAT ARE REMOVED CAN BE REUSED IF IN
GOOD CONDITION.
�
�
DEMOLITIO� PLAN NOTES
D01 NOT USED
�
(D02 DOOR, FRAME AND HARDWARE PREVIOUS�Y IN THIS �OCATION
� HAS BEEN SALVAGED FOR REUSE IN TNE OFFICE 101 DOOR
CONNECTING THE SPACE TO THE FITNESS CENTER.
��3 CREATE NEW DOOR OPENING IN EXISTING WA��.
D04 REMOVE EXISTING RECEPTACLE AND DATA AS SHOWN. PATCH
� WAL� AND PREPARE FOR NEW FINISHES AS REQUIRED. SALVAGE
DEDICATED DUPLEX FOR POSSIBLE REUSE IN NEW COPIER
LOCATION SHOWN ON A121.
`��� REMOVE PORTION OF EXISTING CEILING GRID AND ASSOCIATED
�_� LIGHT FIXTURES AS SHOWN. SALVAGE LIGHT FIXTURES FOR
RELOCATION. SEE REFLECTED CEILING PLAN ON A121 FOR MORE
INFORMATION.
�REMOVE PARTIA� OR FULL CARPET TILES IN THIS AREA AS NEEDED
SUCH THAT AFTER WALLS ARE REMOVED, TI�ES CAN BE PATCHED
TO CREATE CONTINUOUS �AY-OUT.
1. SALVAGE REMOVED LIGHTING AND GIVE TO BUILDING
MANAGEMENT FOR STCJRAGE IF IT IS NOT BEING USED FOR
RELOCATION IN TNIS PARTICU�AR PROJECT.
r----,-�
❑ i�
1:__=_J
:�
'i
�i
ii
ii
r"- -,� � � i
❑ i� �
�====a �i
ii
D� 0� r-�
�� ii �ii
i � �i i°
i t e
�i �_�
G' ' - -,1 I
II II 1 �
1:__=_J I�
� i� � J �
�� ��6 � ���
�R' r� �Tl— � TI � 1 1
u �� ii itl i s i� �� ��
' ii r i i� i � i 1��2 �i i�
�i /� �`,�,� ��i �D�05 `�,_yi ii �� ��
r.—'1 �P� �9 �II1 � �� �1 11 t���1
i i i i� �i �)05 i� ��j i i� i �i io � �
ii - f i- i - i-i ii�- i � � �����
i i i �i i� °i i° i i i i °� �� �� ���
ii i i�-�i �_� ii�i_ i �._� i�__�
`D06 ii E y ��� �L ��_-�
�>
\ L�-_ Lr� � �I
� � � � ��� � �� '�`��
� � �,� , — ��
jr��� �r'�! ` � D0�
� �� �� ��� D05 � �`���
� i�i �� i�i i� � _ �� i
�� �� �� �� � �
�,� _ ��� - �-___-�
� �
�
_ �
— �
�� ;
f� �--ry � 11��
II I1 � I
�:��_=� �-.� I
ii
ii
1i
I', f-- r�o�
,�
- ,�r ---, , �
�� ,, � �
. ��._.__� .__;',
��
,�
� :��
�o� "
- -, �
,�
,�
; ,�r ---, . ,�
,, ,, � �
, L-_ �
� I�____� .__ii
ii
ii
��
, / � / / � �
� � ��� � � ;
AREA NOT IN CONTRACT
AREA OF WORK
��� IDO��
r----ry
�i u
� - - ��
�3
�
DEMOLITION PLAN
0 4' 8' 16'
WALL TYPES
NOTE:
ALL PLAN DIMENSIONS ARE FROM FACE TO FACE OF FINISHED WALL.
ALL WA�LS ARE TO BE W1 UNLESS OTHERWISE NOTED.
NOT ALL WALL TYPES LISTED BEI.OW ARE NECESSARILY USED ON THIS
PROJECT. REFER TO REFLECTED CEI�ING PLAN FOR CEI�ING HEIGHTS.
�� STANDARD WA�L
35/g " META� STUDS AT 16" O.C.;
ONE LAYER OF 5/g" TYPE "X" GYPSUM BOARD
EACH SIDE;
EXTEND WALL TO 6" ABOVE CEILING GRID
INSULATE INSIDE OF WA�L WITH SOUND BATT
INSULATION AND ON 2' OF BOTH SIDES OF
TNE WALL ABOVE THE CEILING.
P LA � N OT ES
C�ALIGN FINISHED WALL SURFACES. PROVIDE SAME THICKNESS
STUDS AS EXISTING WALL AT DOOR INFI��S OR WHERE NEW WALLS
ARE IN LINE WITH EXISTING WALLS.
AO'� PROVIDE SO�ID CORE, P�AIN S�IDED BIRCH MARSHFIELD BOMBAY
DOORS, 3'0"W X 8'-OH X 1 4"D WITN FRAMEWORKS, CLEAR
ANODIZED FRAME. DOOR 05 IS TO BE AN OFFICE �OCKSET AND
DOOR Ob IS TO BE A PASSAGE SET. BOTH DOORS REQUIRE
BUIDLING STANDARD COATHOOKS AND WAL� STOPS.
A03 REPAIR, PATCH AND RESTAIN WOOD MU��IONS AS NEEDED AFTER
WALL REMOVAL.
�� PATCH WALL AS NEEDED FOR NEW FINISHES.
q��� REUSE SA�VAGED DOOR REMOVED FROM MAIL ROOM. TOUCH
UP AS NEEDED. HARDWARE TO BE PASSAGE SET. PROVIDE WA��
STOP.
ARCH ITECTU RA� �EGEN D
NEW CONSTRUCTION EXISTING TO REMAIN
WALL
W?
�� WINDOW / SIDE�IGHT
�DOOR AND FRAME
��
WALL
y � WINDOW / SIDELIGHT
� DOOR AND FRAME
NOTE: IF IN GOOD CONDITION, EXISTING DOORS SALVAGED FROM
DEMOLITION CAN BE SUBSTITUTED FOR NEW DOORS.
GE�ERAL NOTES
1. SEE ELECTRICAL PLAN ON SHEET A121 FOR INTENDED FURNITURE
LAYOUT.
�
�
AREA NOT IN CONTRACT
AREA OF WORK
ARCHITECTURAL PLAN "
0 4' 8' 16'
� ;
�'
O �
� O
N � O U
,, N �1' o �
i Z �'�
� vi��
-�-
' �` Q i� O
W � C'7 U
' O � cn
� � � 3
� 3
THIS DRAWING, AND THE IDEAS,
DESIGNS AND CONCEPTS CONTAINED
HEREIN, ARE THE EXC�USIVE
INTELLECTIJAL PROPERTY OF SCHOTT
DESIGN, INC., AND ARE NOT TO BE
USED OR REPRODUCED IN WHOLE, OR
IN PART, WITHOUT THE WRITTEN
CONSENT OF SCNOTT DESIGN.
SSUE
DATE DESCRIPTION
11.12.15 I CONSTRUCTION ISSUE
EVISIONS
11.02.15 ( AM I PLAN REV
PROJECT NUMBER
2015.307
PROJ. MGR DRAWN BY
MKB TMK
• • '
� � � ' . '
� � � �
..• • .
. ',
E�ECTRICAL �EGEN D
NEW CONSTRUCTION ' EXISTING TO REMAIN
� POWER OUTLET, DUP�EX � POWER OUT�ET, DUPLEX
�POWER OUTLET, � POWER OUTLET,
QUADRUPLEX QUADRUPLEX
� JUNCTION BOX Q JUNCTION BOX
CEILING MOUNTED CEILING MOUNTED
• JUNCTION BOX � JUNCTION BOX
� BOX, B�ANK COVER PLATE �B BOX, BLANK COVER P�ATE
� BOX, OPEN �0 BOX, OPEN
p POWER POLE FOR P POWER AND DATA POLE
❑ ELECTRICAL AND DATA. 0
PROVIDE JUNCTION BOX
ABOVE CEILING.
FLOOR BOX WITH POWER FLOOR BOX WITH POWER
��Q AND DATA, F�USH �t� AND DATA, FLUSH
MOUNTED MOUNTED
FLOOR BOX WITH F�OOR BOX WITH
� IQ JUNCTION BOX AND �J IQ JUNCTION BOX AND
DATA, FLUSH MOUNTED DATA, F�USH MOUNTED
DATA/COMMUNICATION DATA/COMMUNICATION
D� OUTLET (PROVIDE BOX b OUT�ET
AND PUL� STRING ONLYj �,
DED DEDICATED CIRCUIT
GFCI GROUND FAULT CIRCUIT
INTERRUPT OUTLET
+44" HEIGHT OF ELECTRICAL
OR DATA DEVICE
GENERA� NOTES: A�L OUTLETS ARE TO BE INSTA��ED 18" MIN.
A.F.F. TO THE CENTER OF THE DEVICE PER ADA GUIDELINES
UNLESS NOTED OTHERWISE.
REFER TO DOOR SCHEDULE AND COORDINATE WITH
TENANT/OWNER REGARDING JUNCTION BOX LOCATIONS TO
ACCOMMODATE ELECTRIC STRIKES AND CARD READERS.
ELECTRIC STRIKES AND CARD READERS ARE TYPICALLY
INSTAL�ED BY THE TENANT'S SECURITY CONTRACTOR AND ARE
TYPICAL�Y NOT SPECIFIED BY SCHOTT DESIGN, INC.
���C� � ' � ���
E01 EXISTING CARD READER AND SECURITY SYSTEM TO REMAIN AT THIS
ENTRANCE.
E02 CONVERT EXISTING OUTLET TO BE A 1 l OV, 20 AMP OUT�ET FOR
TENANT'S EQUIPMENT (CONFIRM FINAL REQUIREMENTS WITH
BUILDING OWNER PRIOR TO COMMENSING WORK. PROVIDE
)
DEDICATED OUTLET AS REQUIRED. IF POSSIBLE, REUSE DEDICATED
OUTLET REMOVED AND SALVAGED FROM PREVIOUS COPIER
LOCATION IN THIS SPACE.
E03 PROVIDE JUNCTION BOX AND DATA FOR TENANT'S FURNITURE
SYSTEM. COORDINATE EXACT LOCATION WITH TENANT'S
FURNITURE VENDOR.
E04 CONVERT EXISTING DUPLEX TO A JUNCTION BOX FOR TENANT'S
FURNITURE SYSTEM. CONVERT EXISTING DATA FOR TENANT'S
FURNTIURE SYSTEM AS NEEDED.
NEW OR RELOCATED
LIGHT FIXTURE, 2'x4', �ED CREE, CR24 SERIES
CR24-40L-35K-1 OV-HD CONFIRM EXACT
SPECIFICATION WITH BLDG MANAGEMENT
�LIGHT FIXTURE, 2'x2', �ED CREE, CR22 SERIES
CR22-32L-35K-1 OV-HD CONFIRM EXACT
SPECIFICATION WITH BLDG MANAGEMENT
NAVLITE EXIT AND EMERGENCY: NXECRB
SERIES RECESSED MOUNT EDGE-�IT LED,
BATTERY BACK-UP, GREEN IETfERS, SOFT
BRUSHED ALUMINUM FINISH.
NLE� NIGHT IIGHT/EMERGENCY �IGNT- BATTERY
OPERATED INTEGRATED EMERGENCY BA�LAST,
EXACT LOCATIONS AND QUANTITIES TO BE
DETERMINED BY TENANT'S INDEPENDENT
�IGHTING CONSULTANT.
�N
�N3
LIGHT SWITCH
LIGHT SWITCH, 3-WAY
CEILING GRID, Sl1SPENDED, 2'x2'
�,w RELOCATED
r'"` DIFFUSER, LAY-IN, 2'x2'
EXISTING TO REMAIN
� LIGHT FIXTURE, 2'x4'
� LIGHT FIXTURE, 2'x2'
� EXIT LIGHT FIXTURE
� LIGHT SWITCH
CEILING GRID,
SUSPENDED, 2'x2'
EXISTING DIFFUSER, LAY-IN, 2'x2'
NOTE: IF IN GOOD CONDITION, EXISTING H.V.A.C. DEVICES AND CEILING TI�ES SALVAGED
FROM DEMO�ITION CAN BE SUBSTITUTED FOR NEW. NO NEW HVAC DUCTWORK IS TO BE
INSTALLED PER THIS SHEET.
� AREA NOT IN CONTRACT
❑ AREA OF WORK
ELECTRICAL PLAN
0 4' 8' 16'
RELOCATE DIFFUSERS &
�� �.,�� „-.T �� ��„� �����
MECH. DIFFUSER RELOCATION
*REFER TO MECHANICAL NOTES FOR FURTHER INFORMATION
GENERAL NOTES
1. NEW CEILING GRID IN SUITE TO BE 2'X2' AT 9'-10" A.F.F. UNLESS
NOTED OTHERWISE. SEE LEGEND FOR EXACT TYPE. DESIGN INTENT
IS TO MATCH EXISTING HEIGNT OF REMOVED CEILING GRID.
2. PROVIDE EMERGENCY LIGHTING IN TENANT SPACE AS
REQUIRED PER NEMA AND IBC. LIGHTS CONNECTED TO AN
EMERGENCY POWER SOURCE ARE REQUIRED IF THE SPACE
CONTAINS 50 PERSONS OR MORE. FIXTURES SHOWN ON P�AN ARE
FOR REFERENCE ONLY.
3. SEE MECHANICA� PLANS FOR ALL NEW MECHANICAL DETAILS.
4. AL� NEW SPRINKLER HEADS TO BE FULLY RECESSED WITH
CONCEALED WHITE ESCUTCHEON PLATES.
5. ALL GENERA� OPEN OFFICE, STORAGE AND OFFICE LIGHT
FIXTURES TO BE CONNECTED TO "SENSOR SWITCH" MOTION
SENSORS WITH PASSIVE INFRARED TECNNOLOGY. EXACT
LOCATIONS AND QUANTITIES OF SENSORS TO BE COORDINATED
WITH INDEPENDENT �IGHTING CONSULTANT.
8. CUT SHEETS MUST BE PROVIDED TO SDI FOR A�� �IGHT FIXTURES
PRIOR TO ORDERING AND/OR INSTALLATION.
9. A�� SWITCH PLATES, ELECTRICAL DEVICES AND FACEP�ATES TO
BE COLOR: BONE.
10. LIGHTING PLACEMENT AND QUANTITIES ARE FOR REFERENCE
ONLY. ELECTRICAL CONTRACTOR IS RESPONSIB�E FOR VERIFYING
TNAT LAY-OUT AND TOTAL WATTAGE MEETS ASHRAE 90.1
STANDARDS. UNLESS NOTED OTHERWISE, THE LIGHTS SHOWN AS
"NEW OR RELOCATED" ARE TO BE RELOCATED FROM A PREVIOUS
LOCATION AS SHQWN ON THE DEMQLITIQN P�AN. THE DESIGN
INTENT IS LESS THAN 50% OF THE LIGHTS ARE BEING REP�ACED
WITH NEW AND OVERALL WATTAGE IS STAYING THE SAME OR
DECREASING.
P�AN NOTES
R01 RECIRCUIT SWITCHING AS NEEDED SUCH THAT ALL LIGHTING IN
OPEN AREA IS OPERABLE ON SAME CIRCUIT. RE�OCATE CEILING
MOUNTED OCCUPANCY SENSORS AS NEEDED SUCN THAT
OCCUPANCY WITHIN ANY PART OF AREA WITHW SCOPE IS
DETECTED AND WILL REMAIN ON WNILE OCCUPANCY WITHIN
AREA IS MAINTAINED.
R02 PROVIDE NEW 2X2 CEILING GRID AND TI�E TO TIE INTO AND
MATCH EXISTING.
ADD TOGGLE SWITCH IN THIS AREA TO CONTROL CIRCUITED
R03 LIGHTING IN THIS ROOM. DESIGN INTENT IS FOR ALL LIGNTS IN THIS
AREA TO BE ON A SINGLE CIRCUIT THAT CAN BE TOGGLED ON
AND OFF MANUAL�Y AT BOTH EGRESS POINTS. REUSE SALVAGED
DEVICES IF POSSIB�E.
� AREA NOT IN CONTRACT
❑ AREA OF WORK
REFLECTED CEILING PLAN "
0 4' 8' 16'
�v
. �.
�..� u� �;
�
,tff�{z�Fir �
r�(yttz� . itli���"�
�r
s £
�t�';`i�`�r��l°St�>{} t,;�tk';11t�{{,t�a�i;,
4 %..
t�rr�4 �ss
t
rf�ft}{��t$fi�};�11#�1i':#��#{};�#Jiyrt�
t�� ts
, >r�
? o �
i � N O
�' N�oO U
s Nd"o �
tn z � 'in
t� N
� ,vi � �
� Q� �
w � � U
' O � a?
t � � Q- �
� � 3
THIS DRAWING, AND THE IDEAS,
DESIGNS AND CONCEPTS CONTAINED
HEREIN, ARE THE EXCLUSIVE
INTE�IECTl1AL PROPERTY OF SCHOTT
DESIGN, INC., AND ARE NOT TO BE
USED OR REPRODUCED IN WHOLE, OR
IN PART, WITHOUT THE WRITTEN
CONSENT OF SCHOTT DESIGN.
SSUE
DATE � DESCRIPTION
11.12.15 CONSTRUCTION ISSUE
EVISIONS
11.02.15 I AM I PLAN REV
PROJECT NUMBER
2015.307
• � � :
:
1 ST FLOOR
ELECTRICAL P�AN/
REFLECTED
CEILING PLAN
LEGEN D
PAINT / WALLCOVERING
VINYL WALL BASE
NOTE: UNLESS NOTED OTHERWISE, AL� WA��S TO RECEIVE PAINT TO ALSO RECEIVE CORRESPONDING VINYL BASE CO�OR AS INDICATED BY
ARROWS IN �EGEND BELOW. CONTRACTOR TO CHECK PLAN C�OSELY TO VERIFY WOOD OR TILE BASE HAS BEEN NOTED IN P�ACE OF
VINY�.
PT1 MFG: SNERWIN WILLIAMS MFG: JOHNSCJNITE
TYPE: PROMAR 200 ZERO VOC �""" �B� TYPE: 4" VINYL COVE,%" GAUGE
INTERIOR LATEX COLOR: 27 MIST
COLOR: SW 7637 OYSTER WHITE
FINISH: EGGSHE��
MFG: SNERWIN WILLIAMS MFG: JONNSONITE
PT2 TYPE: PROMAR 200 ZERO VOC � VB2 TYPE: 4" VINYL COVE, %8' GAUGE
INTERIOR LATEX COLOR: 461 WICKER
CO�OR: SW 6136 HARMONIC TAN
FINISH: EGGSHE��
MFG: SHERWIN WILLIAMS MFG: JONNSONITE
PT3 TYPE: PROMAR 200 ZERO VOC —� VB3 TYPE: 4" VINYL COVE,%8' GAUGE
INTERIOR �ATEX COLOR: 474 ZEN
COLOR: SW bl 64 SVELTE SAGE
FINISH: EGGSHE��
MFG: SHERWIN WIL�IAMS MFG: JOHNSONITE
PT4 TYPE: PROMAR 200 ZERO VOC � VB4 TYPE: 4" VINYL COVE,%8' GAUGE
INTERIOR LATEX COLOR: 190 GREIGE
CO�OR: SW 6173 COCOON
FINISH: EGGSHE��
MFG: SHERWIN WIL�IAMS MFG: JOHNSONITE
PT5 TYPE: PROMAR 200 ZERO VOC � VB5 TYPE: 4" VINYL COVE,%" GAUGE
INTERIOR �ATEX COLOR: 165 SQUASHED
COLOR: SW 6348 REYNARD
FINISN: EGGSHE�L
MFG: SHERWIN WIL�IAMS MFG: JOHNSONITE
PT6 TYPE: PROMAR 200 ZERO VOC � VB6 TYPE: 4" VINYL COVE,%8' GAUGE
INTERIOR LATEX COLOR: 105 AQUAB�U
CO�OR: SW6485 RAINDROP
FINISH: EGGSHE��
T1 MFG: SHERWIN WILLIAMS
TYPE: PROMAR 200 ZERO VOC
INERIOR LATEX
COLOR: SW 6758 AQUEDUCT
FINISH: EGGSHELL
T14 MFG: SHERWIN WI��IAMS
TYPE: PROMAR 200 ZERO VOC
INERIOR LATEX
CO�OR: SW 6394 SEQUIN
FINISH: EGGSHE��
FLOOR COVERINGS
CARPET_ _
CPT1 MFG: SHAW CONTRACT GROUP
TYPE: MODULAR
PATTERN: 5T018 TANG�E
COLOR: 18740 INTER�ACE
NOTE: INSTA�� MONO�ITHIC, WITN DIRECTION OF
LINEAR PATTERN RUNNING IN DIRECTION OF ARROWS
SNOWN ON PLAN.
MFG: JOHNSONITE
TYPE: 4" VINYL COVE,%8' GAUGE
CO�OR: 105 AQUABLU
MFG: JOHNSONITE
TYPE: 4" VINYL COVE,%8' GAUGE
CO�OR: 136 BEACHY
F01 PATCH CARPET TILE AS REQUIRED PER NEW WALL LAYOUT.
F02 PATCH AND REPAIR CARPET AS NEEDED IN HATCHED AREA. THIS
ENTIRE SECTION MAY NEED TO BE RE-�AID TO A�LOW CARPET TI�ES
TO ALIGN WITH EXISTING PORTION IN MAJORITY OF SPACE.
ADDITIONAL CPT1 CARPET MAY BE REQUIRED. REFERENCE FINISH
LEGEND FOR CPT1 SPECIFICATION.
F03 PATCH AND REPAINT ENTIRE WALL AS NEEDED TO MATCH
EXISTING. PATCH VINY� WA�L BASE SUCH THAT IT �OOKS
CONTINUOUS ALONG WA�L. SEE FINISH LEGEND FOR
SPECIFICATIONS.
F04 TOUCN UP EXISTING WOOD FRAME AND WALL AFTER REMOVAL
OF WALL TO LIKE-NEW CONDITION.
F05 PAINT AND ADD VINYL BASE AS REQUIRED AT PATCH WALL.
F06 EXISTING FINISHES TO REMAIN UNLESS INDICATED SPECIFICA��Y ON
THIS P�AN. SEE GENERAL NOTE REGARDING REPAINTING EXISTING
WAL�S.
GEN ERAL NOTES
1. ASSUME ALL EXISTING WALLS WILL NEED TO BE PATCHED AND PAINTED
WITN EXISTING COLOR, UNLESS NOTED OTHERWISE.
� AREA NOT IN CONTRACT
❑ AREA OF WORK
FINISH PLAN
0 4' 8' 16'
O �
� O
� � � U
��-o �
cn Z ' �n
— � N
� ,v_i � �
a` Q i� O
W � M U
o � N
� � � �
� 3
THIS DRAWING, AND THE IDEAS,
DESIGNS AND CONCEPTS CONTAINED
HEREIN, ARE THE EXCLUSIVE
INTELLECTUAL PROPERTY OF SCHOTT
DESIGN, INC., AND ARE NOT TO BE
USED OR REPRODUCED IN WNOLE, OR
IN PART, WITHOUT THE WRITTEN
CONSENT OF SCHOTT DESIGN.
W
�
�
�
U
SSUE
DATE I DESCRIPTION
11.12.15 CONSTRUCTION ISSUE
DATE DB DESCRIPTION
11.02.15 AM PLAN REV
�������C,�\ ��S e�yl����
? �- ��, ERF� F` ;
_ �0. �
�� AR10700017 ��
,� STATE OF ,c.�
�J'�ND I ANP \
�i�,TFRE�°° p,F��,�
-.� t �Ilnl►'�'•�
��
PROJECT NUMBER
2015.307
PROJ. MGR DRAWN BY
MKB TMK
1 ST F LOO R
FINISH PLAN/
DOOR SCHEDULE
INTERIOR DETAILS