HomeMy WebLinkAbout10 28 13 Toilet Room Accessories.docPEDCOR SQUARE; BUILDING 5
10 28 13 -
PEDCOR SQUARE Issue Date 12.18.15 TOILET ACCESSORIES
PEDCOR SQUARE; BUILDING 5
SECTION 10 28 13 –TOILET ACCESSORIES
PART 1 – GENERAL
1.1 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General and Supplementary
Conditions and Division 01 Specification Sections, apply to this Section.
1.2 SUMMARY
A. Provide toilet accessories where shown on drawings.
1.3 SUBMITTALS
A. Submit for approval samples, product data, and accessory schedule.
1.4 QUALITY ASSURANCE
A. Comply with governing codes and regulations. Use experienced installers. Deliver,
handle, and store materials in accordance with manufacturer’s instructions.
PART 2 - PRODUCTS
2.1 MATERIALS
A. Units: Stainless steel fabrications; ASI – American Specialties, Bobrick Washroom
Equipment, Inc. Basco, or Bradley as noted below.
B. Types, quantities, and locations shown on Drawings
2.2 ACCESSORY SCHEDULE
A. See Drawings for Accessory locations.
B. AC-1 – Automatic Lavatory Mounted Liquid Soap Dispenser:
1. Model Numbers:
a. One-Shot Dispenser System: 401310 (866) 330-3946
b. Bobrick: B-826.
2. Description: Lavatory countertop mounted automatic touch-free soap dispenser,
dispenses 1000 hand washes per 800 ml and 2000 hand washes per 1600ml
soap refills. Bright polished chrome spout
C. AC-2 - Mirror (Not in Contract): To be supplied with interior design package
D. AC-3 - Mop and Broom Holder:
1. Model Numbers:
a. American Specialties: 8215-4.
PEDCOR SQUARE; BUILDING 5
10 28 13 -
PEDCOR SQUARE Issue Date 12.18.15 TOILET ACCESSORIES
PEDCOR SQUARE; BUILDING 5
b. Bobrick: B-223.
2. Description: 36 inches long, 3 inch projection, 4 holders. Minimum 20 gage, Type
304 stainless steel hat channel. Spring loaded rubber cam-type mop holders. No.
4 Satin finish. Mount above integral self-draining mop sink shelf.
E. AC-4 - Surface-Mounted Multi-Roll Tissue Dispenser:
1. Model Numbers:
a. American Specialties: Profile Model 9462
b. Bobrick: Contura B-4288
2. Description: Surface-mounted, Minimum 22 gage Type 304 stainless steel. No. 4
satin finish. Capacity 2 rolls, extra roll automatically drops when first roll is empty.
F. AC-5 – Recessed Paper Towel Dispenser & Waste Receptacle:
1. Model Numbers:
b. Bobrick: Contura B-43944.
a. American Specialties: Profile Model 9030
2. Description: Recessed-mounted, 4 inch wall depth. Minimum 22 gage Type 304
stainless steel. No. 4 satin finish. Capacity minimum 600 C-fold or 800 multi-fold
paper towels.
G. AC-6 - Grab Bars:
1. Model Numbers:
a. Bobrick: Series 6806
b. Bradley: Model 812
2. Description: 1-1/2 inch outside diameter (OD), Type 304, 18 gauge stainless
steel. Snap on concealed mounting and anchorage. No. 4 satin finish. Minimum
900 pound supporting capacity. 1-1/2 inch wall clearance. See drawings for
mounting height and location
3. 36 inch long
4. 42 inch long
PART 3 - EXECUTION
3.1 INSTALLATION
A. Install materials and systems in accordance with manufacturer’s instructions and
approved submittals. Install materials and systems in proper relation with adjacent
construction and with uniform appearance. Coordinate with work of other sections.
B. Install equipment at heights and locations shown on drawings and as otherwise
directed by Americans with Disabilities Act and Indiana Accessibility Code relating to
child care facilities.
C. Coordinate with framing contractor to locate solid wood blocking at required locations.
D. Restore damaged finishes and test for proper operation. Clean and protect work from
damage.
END OF SECTION 10 28 13