HomeMy WebLinkAbout06 40 20 - Interior Architectural WoodworkMidtown West Studio M Architecture and Planning
Carmel, IN November 10, 2017
06 40 20 - 1
SECTION 06 40 20 – INTERIOR ARCHITECTURAL WOODWORK
PART 1 - GENERAL
1.1 SUMMARY
A. Provide Interior Architectural Woodwork.
1) Standing and running trim.
2) Crown Molding as selected by architect/owner and confirmed by CM.
3) Casework and countertop supports.
4) Shelving.
5) Mechanical closet closure panels
1.2 SUBMITTALS
A. Submit product data, samples, mockup of each type.
PART 2 – PRODUCTS
2.1 Interior Standing and Running Trim:
A. All “wet” areas to receive paint grade pine in lieu of MDF
B. Crown Molding: Profile: C23A ¾” x 4-5/8”
C. Door Casing: (1x4) with eased edge
D. Base Molding: Profile: H5C ¾” x 5-3/16”
E. Window Sill: (1x6) with eased edge
F. Window Stool Trim: Profile: H69D 5/8” x 2”
G. Substitutions: Products with similar design characteristics may be
considered at the discretion of the Construction Manager, owner or
architect .
2.2 Shelving:
Refer shelving schedule per individual unit.
A. Closet poles: Wood with intermediate supports.
B. Closet Shelving:
a. MDF shelf above wood pole
b. (5) MDF shelves
C. Pantry shelves:
a. 5 MDF shelves -or-
b. 5 wire shelves
Midtown West Studio M Architecture and Planning
Carmel, IN November 10, 2017
06 40 20 - 2
D. Open cabinet shelving in casework run to match casework. Match unit finish
schedule for casework finish.
2.3 Mechanical closet access panels
A. See 07/A401 for details pertaining to this installation
B. Final panel material selection by owner / Construction Manager.
a. Assume 36” x 96” MDF panel
b. Install EAM-375 33” long Aluminum Z clip 6” below and 6” above
mechanical closet opening on back of panel.
c. Install 1/4” x 2” neoprene closure at edge of mechanical closet opening
to prevent return air from entering closet from corridor. Omit this
step when closet is in interior of unit.
d. CNC apartment numbers in 6” tall letters, stacked vertically, 3” above
bottom edge and 3” from edge of panel closet to door. Submit font
type and create mock-up for typical unit.
e. Shop paint to match specified trim color in corridors.
f. Install with 1/2” reveal from base trim. Add matching head trim at
corridor ceiling with similar reveal.
END OF SECTION