HomeMy WebLinkAbout07 60 00 - Flashing and Sheet MetalMidtown West Studio M Architecture and Planning
Carmel, IN November 10, 2017
07 60 00 - 1
SECTION 07 60 00 – FLASHING AND SHEET METAL
PART 1 - GENERAL
1.1 SUMMARY
A. Provide Flashing and Sheet Metal:
1) Metal counterflashing and base flashing.
2) Exposed metal trim and fascia units.
3) Metal copings
1.2 SUBMITTALS
A. Submit product data, samples, shop drawings.
PART 2 – PRODUCTS
2.1 Sheet Metal Flashing and Trim
2.2 Fabricated Units: Compliance with SMACNA Architectural Sheet Metal Manual.
2.3 Auxiliary Materials:
A. Bituminous isolation coating.
B. Mastic and elastomeric sealants.
C. Epoxy seam sealer.
D. Reglets and metal accessories.
E. Gutter and conductor head guards.
F. Asphaltic roofing cement.
2.4 Installation:
A. Comply with requirements of Section 01000 - Project Requirements.
B. Install flashing and sheet metal with provision for expansion and contraction.
C. Isolate dissimilar metals with bituminous coating.
END OF SECTION