HomeMy WebLinkAbout10 28 16 Apartment Toilet and Bath AccessoriesTHE KENT
10 28 16-
THE KENT Issue Date 05.09.18 APARTMENT TOILET AND BATH
ACCESSORIES
THE KENT
SECTION 10 28 16 – APARTMENT TOILET AND BATH ACCESSORIES
PART 1 - GENERAL
1.1 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General and Supplementary
Conditions and Division 01 Specification Sections, apply to this Section.
1.2 SUMMARY
A. Section Includes:
1. Apartment, private-use bathroom accessories.
B. Related Requirements:
1. Section 09 30 00 "Ceramic Tiling" for ceramic toilet and bath accessories.
1.3 COORDINATION
A. Coordinate accessory locations with other work to prevent interference with clearances required
for access by people with disabilities, and for proper installation, adjustment, operation,
cleaning, and servicing of accessories.
B. Deliver inserts and anchoring devices set into concrete or masonry as required to prevent
delaying the Work.
1.4 ACTION SUBMITTALS
A. Product Data: For each type of product.
1. Include construction details, material descriptions, dimensions of individual components
and profiles, and finishes.
2. Include anchoring and mounting requirements, including requirements for cutouts in other
work and substrate preparation.
3. Include electrical characteristics.
B. Samples: Full size, for each exposed product and for each finish specified.
1. Approved full-size Samples will be returned and may be used in the Work.
THE KENT
10 28 16-
THE KENT Issue Date 05.09.18 APARTMENT TOILET AND BATH
ACCESSORIES
THE KENT
C. Product Schedule: Indicating types, quantities, sizes, and installation locations by room of each
accessory required.
1. Identify locations using room designations indicated.
2. Identify accessories using designations indicated.
1.5 INFORMATIONAL SUBMITTALS
A. Sample Warranty: For manufacturer's special warranty.
1.6 CLOSEOUT SUBMITTALS
A. Maintenance Data: For accessories to include in maintenance manuals.
PART 2 - PRODUCTS
2.1 PERFORMANCE REQUIREMENTS
A. Electrical Components, Devices, and Accessories: Listed and labeled as defined in NFPA 70, by
a qualified testing agency, and marked for intended location and application.
2.2 PRIVATE-USE BATHROOM ACCESSORIES
A. Source Limitations: Obtain private-use bathroom accessories from single source from single
manufacturer.
B. Towel Bar:
1. Moen; Model P5124-Chrome.
2. Description: 3/4-inch- square aluminum rod with polished chrome-plated zinc alloy
(zamac) end brackets.
3. Mounting: Flanges with concealed fasteners.
4. Length: 24 inches.
5. Material and Finish: Polished chrome-plated zinc alloy (zamac).
C. Toilet Tissue Holder:
1. Moen; Model P5050-Chrome.
2. Description: Single-roll dispenser.
3. Mounting: Surface mounted.
4. Capacity: Designed for 4-1/2- or 5-inch- diameter tissue rolls.
5. Material and Finish: Polished chrome-plated zinc alloy (zamac).
THE KENT
10 28 16-
THE KENT Issue Date 05.09.18 APARTMENT TOILET AND BATH
ACCESSORIES
THE KENT
D. Soap Dish:
1. American Olean; Model BA725.
2. Description: Soap dish.
3. Mounting: Recessed.
4. Material and Finish: Ceramic.
E. Towel Bar:
1. American Olean; Model BA730.
2. Description: 3/4-inch- round acrylic rod with circular end brackets.
3. Mounting: Flanges with concealed fasteners.
4. Length: 30 inches.
5. Material and Finish: Travertine brackets with a clear acrylic bar.
F. Shower Curtain Rod:
1. ProFlo; Model PFCR60CP.
2. Outside Diameter: 1 inch.
3. Mounting: Flanges with exposed fasteners.
4. Rod Material and Finish: Aluminum alloy.
5. Flange Material and Finish: Aluminum alloy.
G. Mirror:
1. Refer to Drawings.
H. Towel Ring
1. Creative Specialties; Model P5500
2. Description: 6” clear acrylic ring and polished chrome bracket with concealed screw
mounting.
2.3 MATERIALS
A. Stainless Steel: ASTM A 666, Type 304, 0.031-inch minimum nominal thickness unless
otherwise indicated.
B. Steel Sheet: ASTM A 1008, Designation CS (cold rolled, commercial steel), 0.036-inch minimum
nominal thickness.
C. Galvanized-Steel Sheet: ASTM A 653, with G60 hot-dip zinc coating.
D. Galvanized-Steel Mounting Devices: ASTM A 153, hot-dip galvanized after fabrication.
E. Fasteners: Screws, bolts, and other devices of same material as accessory unit and tamper-
and-theft resistant where exposed, and of galvanized steel where concealed.
THE KENT
10 28 16-
THE KENT Issue Date 05.09.18 APARTMENT TOILET AND BATH
ACCESSORIES
THE KENT
F. Chrome Plating: ASTM B 456, Service Condition Number SC 2 (moderate service).
2.4 FABRICATION
A. General: Fabricate units with tight seams and joints, and exposed edges rolled. Hang doors and
access panels with full-length, continuous hinges. Equip units for concealed anchorage and with
corrosion-resistant backing plates.
B. Keys: Provide universal keys for internal access to accessories for servicing and resupplying.
Provide minimum of six keys to Owner's representative.
PART 3 - EXECUTION
3.1 INSTALLATION
A. Install accessories according to manufacturers' written instructions, using fasteners appropriate
to substrate indicated and recommended by unit manufacturer. Install units level, plumb, and
firmly anchored in locations and at heights indicated.
3.2 ADJUSTING AND CLEANING
A. Adjust accessories for unencumbered, smooth operation. Replace damaged or defective items.
B. Remove temporary labels and protective coatings.
C. Clean and polish exposed surfaces according to manufacturer's written instructions.
END OF SECTION 10 28 16