HomeMy WebLinkAbout18110110 ElectricalCOMcheck Software Version 4.0.8.2
Interior Lighting Compliance Certificate
Project Title:
2012 IECC
Project Type:Alteration
Construction Site:
10325 N. MICHIGAN RD.
CARMEL, IN 46032
Owner/Agent:
Chuy's
1623 Toomey Road
Austin, TX 75067
514.473.2783
Designer/Contractor:
Dialectic, Inc
310 W 20th St
Suite 200
Kansas City, MO 64108
816.997.9601
Project Information
Energy Code:
Chuy's
Allowed Interior Lighting Power
A
Area Category
B
Floor Area
(ft2)
C
Allowed
Watts / ft2
D
Allowed Watts
(B X C)
1-Dinning (Common Space Types:Family dining area)4950 1.40 6930
6930Total Allowed Watts =
Proposed Interior Lighting Power
E
(C X D)
D
Fixture
Watt.
A
Fixture ID : Description / Lamp / Wattage Per Lamp / Ballast
B
Lamps/
Fixture
C
# of
Fixtures
Dinning ( Common Space Types:Family dining area 4950 sq.ft.)
LED 1: A3: Recessed: Other:1 9 26 234
LED 1 copy 1: A5: Recessed: Other:1 57 10 570
Track lighting 1: A6: TRACK: Wattage based on circuit breaker capacity (15 amps x 120 volts)0 0 1800 1800
LED 4: B: Linear: Other:1 4 51 204
LED 5: CB: Pendant: Other:1 1 30 30
LED 6: CC: Pendant: Other:1 4 30 120
LED 7: F: Fisher: Other:1 16 10 160
LED 8: J: Recessed: Other:1 14 27 378
LED 9: M/MX: Linear: Other:1 20 56 1120
LED 11: P1: Pendant: Other:1 21 10 210
LED 11 copy 1: P2: Pendant: Other:1 10 10 100
LED 12: P3: Pendant: Other:1 10 40 400
LED 16: Z: Surface: Other:1 1 75 75
5401Total Proposed Watts =
Interior Lighting Compliance Statement
Compliance Statement: The proposed interior lighting alteration project represented in this document is consistent with the
building plans, specifications, and other calculations submitted with this permit application. The proposed interior lighting
systems have been designed to meet the 2012 IECC requirements in COMcheck Version 4.0.8.2 and to comply with any
applicable mandatory requirements listed in the Inspection Checklist.
Interior Lighting PASSES
Project Title:
Data filename:
Chuy's
Y:\_Projects\Active\2018\01201828.31\01201828.31.Calcs and Support\182831 COMCHECK.cck
10/22/18Report date:
81 ofPage
Name - Title Signature Date
Project Title:
Data filename:
Chuy's
Y:\_Projects\Active\2018\01201828.31\01201828.31.Calcs and Support\182831 COMCHECK.cck
10/22/18Report date:
82 ofPage
Jeremy Marjan - EE 10/22/18
COMcheck Software Version 4.0.8.2
Exterior Lighting Compliance Certificate
Project Title:
2012 IECC
Project Type:Alteration
Construction Site:
10325 N. MICHIGAN RD.
CARMEL, IN 46032
Owner/Agent:
Chuy's
1623 Toomey Road
Austin, TX 75067
514.473.2783
Designer/Contractor:
Dialectic, Inc
310 W 20th St
Suite 200
Kansas City, MO 64108
816.997.9601
Project Information
Energy Code:
Chuy's
2 (Neighborhood business district)Exterior Lighting Zone
Allowed Exterior Lighting Power
A
Area/Surface Category
B
Quantity
C
Allowed
Watts / Unit
D
Tradable
Wattage
E
Allowed Watts
(B X C)
Illuminated area of facade wall or surface 2232 ft2 0.1 No 223
Total Tradable Watts (a) =
Total Allowed Watts =
Total Allowed Supplemental Watts (b) =
0
223
600
(a)Wattage tradeoffs are only allowed between tradable areas/surfaces.
(b)A supplemental allowance equal to 600 watts may be applied toward compliance of both non-tradable and tradable areas/surfaces.
Proposed Exterior Lighting Power
E
(C X D)
D
Fixture
Watt.
A
Fixture ID : Description / Lamp / Wattage Per Lamp / Ballast
B
Lamps/
Fixture
C
# of
Fixtures
Illuminated area of facade wall or surface (2232 ft2): Non-tradable Wattage
LED 1: L1: Wall mount fixture: Other:1 24 13 312
0Total Tradable Proposed Watts =
Exterior Lighting Compliance Statement
Compliance Statement: The proposed exterior lighting alteration project represented in this document is consistent with the
building plans, specifications, and other calculations submitted with this permit application. The proposed exterior lighting
systems have been designed to meet the 2012 IECC requirements in COMcheck Version 4.0.8.2 and to comply with any
applicable mandatory requirements listed in the Inspection Checklist.
Name - Title Signature Date
Exterior Lighting PASSES
Project Title:
Data filename:
Chuy's
Y:\_Projects\Active\2018\01201828.31\01201828.31.Calcs and Support\182831 COMCHECK.cck
10/22/18Report date:
83 ofPage
Jeremy Marjan-EE 10/22/18
Inspection Checklist
Requirements: 100.0% were addressed directly in the COMcheck software
COMcheck Software Version 4.0.8.2
Text in the "Comments/Assumptions" column is provided by the user in the COMcheck Requirements screen. For each
requirement, the user certifies that a code requirement will be met and how that is documented, or that an exception
is being claimed. Where compliance is itemized in a separate table, a reference to that table is provided.
Energy Code: 2012 IECC
Section
#
& Req.ID
Plan Review Complies?Comments/Assumptions
C103.2
[PR4]1
Plans, specifications, and/or
calculations provide all information
with which compliance can be
determined for the interior lighting
and electrical systems and equipment
and document where exceptions to
the standard are claimed. Information
provided should include interior
lighting power calculations, wattage of
bulbs and ballasts, transformers and
control devices.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
C103.2
[PR8]1
Plans, specifications, and/or
calculations provide all information
with which compliance can be
determined for the exterior lighting
and electrical systems and equipment
and document where exceptions to
the standard are claimed. Information
provided should include exterior
lighting power calculations, wattage of
bulbs and ballasts, transformers and
control devices.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
Additional Comments/Assumptions:
1 High Impact (Tier 1)2 Medium Impact (Tier 2)3 Low Impact (Tier 3)
Project Title:
Data filename:
Chuy's
Y:\_Projects\Active\2018\01201828.31\01201828.31.Calcs and Support\182831 COMCHECK.cck
10/22/18Report date:
84 ofPage
Section
#
& Req.ID
Rough-In Electrical Inspection Complies?Comments/Assumptions
C405.2.2.
1
[EL22]2
Automatic controls to shut off all
building lighting installed in all
buildings.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
C405.2.1.
1
[EL23]2
Independent lighting controls installed
per approved lighting plans and all
manual controls readily accessible and
visible to occupants.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
C405.2.1.
2
[EL15]1
Lighting controls installed to uniformly
reduce the lighting load by at least
50%.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
C405.2.2.
3
[EL16]2
Daylight zones provided with
individual controls that control the
lights independent of general area
lighting.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
C405.2.3
[EL17]3
Sleeping units have at least one
master switch at the main entry door
that controls wired luminaires and
switched receptacles.
Complies
Does Not
Not Observable
Not Applicable
Exception: Requirement does not apply.
C405.2.2.
2
[EL18]1
Occupancy sensors installed in
required spaces.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
C405.2.2.
3
[EL20]1
Primary sidelighted areas are
equipped with required lighting
controls.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
C405.2.2.
3
[EL21]1
Enclosed spaces with daylight area
under skylights and rooftop monitors
are equipped with required lighting
controls.
Complies
Does Not
Not Observable
Not Applicable
Exception: Requirement does not apply.
C405.2.4
[EL25]2
Automatic lighting controls for exterior
lighting installed.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
C405.2.3
[EL4]1
Separate lighting control devices for
specific uses installed per approved
lighting plans.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
C405.3
[EL19]3
Fluorescent luminaires with odd
numbered lamp configurations that
are within 10 feet center to center (if
recess mounted) or are within 1 foot
edge to edge (if pendant or surface
mounted) shall be tandem wired.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
C405.4
[EL6]1
Exit signs do not exceed 5 watts per
face.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
1 High Impact (Tier 1)2 Medium Impact (Tier 2)3 Low Impact (Tier 3)
Project Title:
Data filename:
Chuy's
Y:\_Projects\Active\2018\01201828.31\01201828.31.Calcs and Support\182831 COMCHECK.cck
10/22/18Report date:
85 ofPage
Section
#
& Req.ID
Rough-In Electrical Inspection Complies?Comments/Assumptions
C405.6
[EL24]1
Exterior grounds lighting over 100 W
provides >60 lm/W unless on motion
sensor or fixture is exempt from scope
of code or from external LPD.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
C405.2.3
[EL8]1
Additional interior lighting power
allowed for special functions per the
approved lighting plans and is
automatically controlled and
separated from general lighting.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
Additional Comments/Assumptions:
1 High Impact (Tier 1)2 Medium Impact (Tier 2)3 Low Impact (Tier 3)
Project Title:
Data filename:
Chuy's
Y:\_Projects\Active\2018\01201828.31\01201828.31.Calcs and Support\182831 COMCHECK.cck
10/22/18Report date:
86 ofPage
Section
#
& Req.ID
Final Inspection Complies?Comments/Assumptions
C408.2.5.
1
[FI16]3
Furnished as-built drawings for
electric power systems within 30 days
of system acceptance.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
C303.3,
C408.2.5.
2
[FI17]3
Furnished O&M instructions for
systems and equipment to the
building owner or designated
representative.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
C405.5.2
[FI18]1
Interior installed lamp and fixture
lighting power is consistent with what
is shown on the approved lighting
plans, demonstrating proposed watts
are less than or equal to allowed
watts.
Complies
Does Not
Not Observable
Not Applicable
See the Interior Lighting fixture schedule for values.
C405.6.2
[FI19]1
Exterior lighting power is consistent
with what is shown on the approved
lighting plans, demonstrating
proposed watts are less than or equal
to allowed watts.
Complies
Does Not
Not Observable
Not Applicable
See the Interior Lighting fixture schedule for values.
C408.3
[FI33]1
Lighting systems have been tested to
ensure proper calibration, adjustment,
programming, and operation.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
C408.3
[FI48]1
Lighting systems have been tested to
ensure proper calibration, adjustment,
programming, and operation.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
Additional Comments/Assumptions:
1 High Impact (Tier 1)2 Medium Impact (Tier 2)3 Low Impact (Tier 3)
Project Title:
Data filename:
Chuy's
Y:\_Projects\Active\2018\01201828.31\01201828.31.Calcs and Support\182831 COMCHECK.cck
10/22/18Report date:
87 ofPage
Project Title:
Data filename:
Chuy's
Y:\_Projects\Active\2018\01201828.31\01201828.31.Calcs and Support\182831 COMCHECK.cck
10/22/18Report date:
88 ofPage