HomeMy WebLinkAboutStandard Bike Rack Drawing36"
30" (Min.) 30" (Min.) 30" (Min.) -----
30" 30"
O
13-13
O
— 24"
Minimum distance
from wall or other
obstructions.
60"
fl_
Materials and Installation shall be per
"City of Carmel" Bicycle Parking Policy.
O
114"
24"
All dimensions are minimum distances. ,
O The inverted U's shall be fabricated from 0 1/2") Schedule 40 Pipe, in accordance with ASTM F 1083, 48.36 mm O.D. x 3.683 mm wall (1.90" x 0.145" wall).
The U's shall measure 36" high, 18" wide. The bicycle racks shall not be welded in sections. Only the base plate shall be welded to the steel pipe with two (2)
3mm (1/8") vent holes - one on the inside of each upright where the pipe is welded to the baseplate.
C/1 After fabrication, the rack shall be coated with a Thermoplastic (polyethylene copolymer based) powder coating (polyarmor) to a thickness 200-250
d �] micrometers (8-12 mils).
r- O2 All racks shall be surface mounted. Racks shall be mounted to concrete via 190mm (7 1/2") diameter base plate 10 mm (3/8") thick steel in accordance with
O ASTM A 36, with three 11 mm diameter (7/16") mounting holes on each base plate, spaced equidistant between the upright pipe and edge of the baseplate.
t�J d Expansion anchor to be carbon steel mushroom head, 10 mm x 76 mm (3/8" x 3") "spike" #5550 as manufactured bt Rawl or approved equal manufactured in the U.S.
made from grade 8.2 materials exhibiting equivalent theft -proof performance. Racks shall be set firm and aligned with a tolerance of plus of minus a 1/4" from plumb.
Where required, steel tapered shims shall be installed prior to anchoring in place. Any departure of base plate from grade by more than 3/8" shall require the
seperation to be filled with a high-strength epoxy non -shrinking grout and made level.
A
Section A -A
Section B -B