HomeMy WebLinkAboutPool SpecSignage must be permanantly attached
around the perimeter of the pool.
THIS DOCUMENT IS FOR ILLUSTRATIVE PURPOSES ONLY.
Only Alpha Pool Products makes only those representations which are stated in its written warranty. Any other representations, statements, or contracts made by the dealer/contractor to the customer regarding any components produced
by Only Alpha Pool Products are attributable to the dealer/contractor only. The dealer or contractor who sells or installs your pool is an independant contractor and is not an agent or employee of Only Alpha Pool Products. The construction
methods illustrated here are suggestions and apply only to normal ground conditions. There may be additional precautions and/or methods of construction. The responsibility is the contractor's. -A safety line, with buoys, is to be
permanently attached 1'-0" to the shallow side of the point of first slope change. -Different methods and precautions may be dictated by various ground conditions. This is to be determined by and is the responsibility of the contractor who
is not an agent of the manufacturer of the component parts. -Installation is to be done in accordance with all federal, state and local building codes, as well as A.N.S.I./N.S.P.I. suggested standards. -BOTTOM SPECIFICATIONS MUST MEET
OR EXCEED A.N.S.I./N.S.P.I./A.P.S.P. RECOMMENDED STANDARDS -'NO DIVING' signage must be permanently attached to the entire perimeter of the pool. See instructions with signage. -IT IS RECOMMENDED TO NOT INSTALL
DIVING BOARDS AND/OR SLIDING EQUIPMENT ON RESIDENTIAL POOLS. If diving boards and/or sliding equipment is installed by the contractor, such diving boards and sliding equipment MUST BE INSTALLED
WITHIN THE GUIDELINES ESTABLISHED BY ANSI/NSPI/ASPA RECOMMENDED STANDTARDS, AND IN ACCORDANCE WITH ALL APPLICABLE STATE AND LOCAL CODES AND REGULATIONS.
24' X 62'-10" FREEFORM
COMPOSITE WALL POOL SYSTEM
DWG #: CM-8646 PAGE 1 OF 2DATE: 4/8/2019 REV: -
AREA (SqFt): 1,272 PERIMETER: 170' EST. VOL (US Gal): TBD
BILL OF MATERIALS
DESCRIPTION
PART NUMBERQTY
Cmp Pnl 72" PlainPC-7206
Cmp Pnl 72" Skim Lft Flush (1085)PC-720SLFL
4
Cmp Pnl 34" PlainS-PC-3401
Cmp Pnl 54" Plain-FuzionS-PC-5401
Cmp Pnl 21" x 12'RRS-PC-21012RR
1
Cmp Pnl 30" x 12'RRS-PC-36012RR
1
Cmp Pnl 72" x 12'RRS-PC-72012RR
2
Cmp Pnl 12"x12" 90Deg Trans PlainS-PC-121290TP1
TBD (Trans)S-PS-00001
TBD (Step)S-PS-0000SP1
TBD (Bench)S-PS-0000SP1
COPING
QTY PART NUMBER DESCRIPTION
1 HW-2018 Hdw Auto-Cover, No-Diving
Plate (7/Bag)
*THIS DRAWING REPRESENTS CUSTOMER SPECIFICATIONS.
*YOUR SIGNATURE ACKNOWLEDGES ACCEPTANCE.
SIGN:___________________________ DATE:____________
BRACE / HARDWARE OPTIONS
QTY PART NUMBER DESCRIPTION
35 STPC-1001EBT
Ptd Brc Evolution Brace System (Standard
Turnbuckle Support / 2-Piece I-Beam / Drive Stake)
1 HW-1007 Hdw 12x1" Tek Screws - 100/Box
1 HW-2014 Hdw (CM Tunbuckle Kit)
1 HW-2002 Hdw Steel/Rrd Kit
CUSTOMER: POOLS OF FUN
TAG: BROWN
62'-10"
24'-0"
1'-6"
12'-5"
R3'-0"
R3'-6"
R3'-0"
0'-6"
0'-6"100°
17'-5 1/2"
13'-7"
R6'-0"
R6'-0"
R7'-0"
R8'-0"
R4'-0"
R5'-0"
R6'-0"
R2'-6"5'-7"
1'-6"
R3'-0"
R5'-0"
R10'-0"
R12'-0"
S-PS-0000
S-PS-0000SP
R12'-0"
R5'-0"
S-PS-0000SP
47'-4 3/8"
S-PC-540PC-720SLFL PC-720 PC-720SLFL PC-720
PC-720
S-PC-121290TP
PC-720
PC-720
PC-720SLFL PC-720 PC-720SLFL S-PC-340
S-PC-72012RR
S-PC-72012RR
S-PC-36012RR
S-PC-21012RR
30'-0"
19'-0"
15'-0"
07/02/19
David Rutti