HomeMy WebLinkAboutStructural - Casework Elevations.3
I.—Flrll$h face of wall
75 -'e Typical mail slot height+/-
w
o plexi glass dividers provided by tenant
t cut length to fit depth as needed,
w a 'O height adjustable
'w
_ finished plastic laminate self edge
slot, white melamine inferior, all sides
Countertop as Scheduled with 4" high backsplash
where occurs. No backslposh behind mail slots. Refer
to Finish Plans and Elevations for Color/Type.
Full-exfension drowerglides, fyp.
Cabinet Pulls. Referto Millwork
general notes.
Adjustable I' P. Lam. Shelf on Knape &
Vogt #255 and #256 zinc adjustable
shelf standards and brackets.
Provide vinyl cove base. Scribe to floor.
Height fo match adjacent scheduled base.
Refer to Finish Plan and Elevations for
2'-0" Color/Type.
3 Base and Mail Slots - ADD ALT. NO.1
3/4"= I'-0
Fmail slots, 40 slots each approximately 6.25FF6.75" clear with
plexi glass dividers/shelves provided by tenant, inferior of
mail slots to be white melamine, all edges and finished ends
to be plastic laminate. Back open to finished wall.
Emo
WE
I
!FINI♦���llllllllll��
o 0
000�
o00
Paint
plastic laminate upper cabinets
Paint
plastic laminate 25'Dcountertop
with 4'H back and side splash
wall base
a'-0 3'-0° 3'-o° 3'-o°
1 Resource Room 204 - ADD ALT. NO.1
3/8'=I'-0
RELEASED FOR CONSTRUCTION
Subject to compliance with all regulations
of State and meal Codes
City of Camel (�
�VTl�lla>ndha�L
DATE: \ 09/04/19
Finish face of wall
Adjustable I"Plastic Laminate Shelving,
Typical, on full -height Knape & Vogt #255
and #256 zinc adjustable shelf standards
and brackets.
Cabinet Pulls. Refer to Millwork
general notes.
finish end beyond
Countertop as Scheduled with 4" high
baciabash where occurs. Refer to Finish
Plans and Elevations for Color/Type.
Full -extension drawer glides, fyp
Cabinet Pulls. Refer to Millwork
general notes.
Adjustable I"P. Lam. Shelf on Knape &
Vogt #255 and #256 zinc adjustable
shelf standards and brackets.
Provide vinyl cove base. Scribe to floor.
Height to match adjacent scheduled base.
Refer to Finish Plan and Elevations for
Color/Type.
2 Base and Upper Cabinet - ADD ALT. No.1
3/4"= I'-0
GENERAL NOTES - MILLWORK
A. Al casework shall be PLI, unless noted otherwise.
B. All countertops shall be PE2, unless rated otherwise.
C. All cabinetpull hardware shall be Doug MockettODP57B in Satin Stainless Steel finish, unless
noted otherwise.
D. All cabinet typical drawer glides shall be Accuride#3832EC, unless noted otherwise.
E. All cabinet hash drawer glides shall be Accuride#3634, unless noted otherwise.
F. Unless otherwise noted on this drawing, refer to Finish Plan and Notes Sheet for all finish
selections.
G. Unless otherwise noted on this drawing, refer to Finish Plan and Notes Sheet for all cabinet
types, manufacturers and hardware selections.
H. Where cabinets meet, do not provide full depth end panel, to allow for installation of task
light.
J. Where filler ships are required between cabinets, casework, etc. and adjacent walls, provide
matching, equal size ships at each end by cabinetcontractor.
K. Unless otherwise noted on this drawing, all countertops must be continuous. All countertops
without backsplashes must be scribed to the wall as noted on sections and details,
L. Plastic laminate millwork, typical. Provide plastic laminate on all exposed surfaces. Inferiors
to be white melamine.
M. Provide self edge along exposed edges (front and sides of countertop).
N. Contractor shall be responsible for the field verification of all dimensions, rough openings
and job conditions prior to beginning fabrication of any work shown or noted on this
drawing. Contractor must coordinate with Architect any discrepancies between what is
shown or noted on this drawing and actual field verification conditions.
O. Provide wood blocking as required,
P Unless otherwise noted, sinks (where indicated) will be centered within the width of the base
cabinet. See plans and/or elevations for cabinet widths.
O. Where garbage disposals are indicated, provide a wall mounted switch as nearas possible
to 8" from centedine of sink with bottom of switch plate min. of 2" above fop of backsplash.
;ARSON
DESIGN
ASSOCIATES
MIDWEST
9229 Delegates Row
Suite 250
Indianapolis, IN 46240
Tel 317,843,5979 Fax 317,843,5975
SOUTHWEST
12301 Research Blvd
Bldg IV- Suite 130
Austin, TX 78759
Tel 512.977.0520 Fax 512.977.0384
arsondesigo.com
Z
^,
Fort
o
Q
w NamA,,
0
Q
Fi
�
2
N
o00
}
}U}
O�
>
/IV
y/
Q%
W
Y
co
O
O
cM
STAMP:
`s`OvvtvM\CH ur4iii
R(P xxxii
��p'k�EGIST
9 v
F —'
pyixgii .S `p:
RUHE `s3p0
06.07.19
ISSUE:
Permit Set 06.07.19
DRAWING TITLE:
Interior Elevations
JOB NO. 11827705
DATE: 06.07.19
SHEET NUMBER:
A501
carwicMmrs
ursa+ Damr+ AswaAra