HomeMy WebLinkAboutplan_design_release04292005ELECTRONICALLY FILE YOUR PROJECT WITH STATE OF INDIANA at http://www.in.gov/dhs/2650.htm.
This on-line filing is through a secure site, you can use it to submit your project information, pay the fees and upload your project plans.
Use Internet Browser to View this report, other browsers are not compatible to view this report
Page 1/3
CONSTRUCTION DESIGN RELEASE
State Form 41191 (R9/5-98)
Report Printed on:July 9, 2019
Project number Release date
408960 07/09/19
Construction type Occupancy classification
Scope of release
II-A, SPK B, A-2, A-3, REM
Type of release
Project name
Street address
City County
ARCH ELEC MECH
PLUM
Standard
Geico Corporate First Floor Renovation Phase
101 W 103rd St
INDIANAPOLIS HAMILTON
To: Owner / Architect / Engineer
American Structurepoint, Inc.
Robert Stephen Bray AR10900003
7260 Shadeland Station
Indianapolis IN 46256
Note :(A1A & A1B): In accordance with the affidavit sworn under penalties of perjury in the application for construction design release the plans
and specifications filed in conjunction with this project shall comply with all of the applicable rules and laws of Fire Prevention and Building Safety
Commission. Providing false information constitutes an act of perjury, which is a Class D felony punishable by a prison term and a fine up to $10,000.
The plans, specifications and application submitted for the above referenced project have been reviewed for compliance with the applicable rules of
the Fire Prevention and Building Safety Commission. The project is released for construction subject to, but not necessarily limited to, the conditions
listed below. THIS IS NOT A BUILDING PERMIT. All required local permits and licenses must be obtained prior to beginning construction work. All
construction work must be in full compliance with all applicable State rules. Any changes in the released plans and/or specifications must be filed with
and released by this Office before any work is altered. This release may be suspended or revoked if it is determined to be issued in error, in violation
of any rules of the Commission or if it is based on incorrect or insufficient information. This release shall expire by limitation, and become null and
void, if the work authorized is not commenced within one (1) year from the above date.
CONDITIONS:
4G0412AE
4G0603AE
4G0603AS
4G0607AN
A2
14B0707310A
14B0707310B
Areas designated as ”Future”, “Vanilla” , “Not In Contract” “Shell” or “White Box” shall be filed as
new projects per the General Administrative Rules (675 IAC 12-6-3 (a))
This project has been reviewed under the 2014 Indiana Building Code, 2014 Indiana Fire Code,
2009 Indiana Electrical Code, 2012 Indiana Plumbing Code, 2014 Indiana Mechanical Code, 2014
Indiana Fuel Gas Code, 2010 Indiana Accessibility Chapter 11 (ICC A117.1 2009), and the 2010
Indiana Energy Conservation Code (ASHRAE 90.1 2007)
The proposed building, addition, or remodel shall not put the existing building in noncompliance or
into further noncompliance in accordance with 675 IAC 12-4-12.
Detailed plans and specifications of the fire suppression system shall be filed with the required
application and appropriate fees in accordance with 675 IAC 12-6-3(a), 675 IAC 12-6-7(g)(17), and
675 IAC 13-1-8. (N.F.P.A. 13)
This release does not include structural work. Plans and specifications for adding or remodeling
this system shall be filed as a new project or as a partial before commencing work in accordance
with 675 IAC 12-6-3.
Plans and specifications for the kitchen exhaust hood shall be submitted in accordance with 675
IAC 12-6-7-(b).
An elevator installation permit shall be obtained from the Elevator Safety Division in accordance with
IESC (675 IAC 21-1-1). Please visit: http://www.in.gov/dhs/2374.htm
One or more fire barriers or horizontal assemblies are being provided for the purpose of separating
a single occupancy into different fire areas in accordance with Section 707.3.10, IBC (675 IAC 13-
2.6).
One or more fire barriers or horizontal assemblies are being provided for the purpose of separating
mixed occupancies into different fire areas in accordance with Section 707.3.10, IBC (675 IAC 13-
2.6).
Indiana Department of Homeland Security
DIVISION OF FIRE & BUILDING SAFETY
PLAN REVIEW DIVISION
402 W. Washington St., Room E245
Indianapolis, IN 46204
Fax & e-mail:
SUPPORT HOOSIER SAFETY
Available At Your Local Licence Branch
In accordance with Section 19 of the General Administrative Rules (675 IAC 12-6-19) a complete set of plans and specifications that conform
exactly to the design that was released by the office of the state building commissioner shall be maintained on the construction jobsite as well as a
copy of the design release.
3175430270, rbray@structurepoint.com
ELECTRONICALLY FILE YOUR PROJECT WITH STATE OF INDIANA at http://www.in.gov/dhs/2650.htm.
This on-line filing is through a secure site, you can use it to submit your project information, pay the fees and upload your project plans.
Use Internet Browser to View this report, other browsers are not compatible to view this report
Page 2/3
14B07037
9E11026A
AREL
Fire walls and vertical fire barriers shall be effectively and permanently identified with signs or
stenciling. Such identification shall: 1. Be located in accessible concealed floor, floor-ceiling or attic
spaces; 2. Be located within 15 feet of the end of each wall and at intervals not exceeding 30 feet
measured horizontally along the wall or partition; and 3. Include lettering not less than 3 inches in
height with a minimum 3/8 inch stroke in a contrasting color incorporating the suggested wording,
"FIRE WALL or FIRE BARRIER PROTECT ALL OPENINGS" or similar wording in accordance with
Section 703.7, IBC (675 IAC 13-2.6).
Access and working space shall be provided and maintained about all electric equipment in
accordance with Section 110.26, IEC (675 IAC 17-1.8).
Buildings shall be addressed as set forth in section 501.2 IBC (675 IAC 13-2.6)
Occupancy Groups shall be separated as prescribed in Table 508.4 IBC (675 IAC 13-2.6)
Electrical boxes in rated assemblies shall be installed as set forth in section 714.3.2 IBC (675 IAC
13-2.6)
Shaft Enclosures shall have a Fire Rating not less than that set forth in section 713.4 IBC (675 IAC
13-2.6)
Penetrations in Rated Assemblies shall be effectively protected as set forth in section 714 IBC (675
IAC 13-2.6)
Fireblocking shall be installed as set forth in section 718 IBC (675 IAC 13-2.6)
Interior wall and ceiling decorative components shall be as set forth in Chapter 7 & Chapter 8 IBC
(675 IAC 13-2.6) and ASTM C 635 & C 636
Occupancy Load Signage shall be posted in accordance with Section 1004.3 IBC (675 IAC 13-2.6)
Exterior egress lighting fixtures shall be part of the emergency lighting system in accordance with
Section 1006.1 IBC (675 IAC 13-2.6)
Panic Hardware shall be installed on egress doors in an “A” , “E” and/or “H” occupancies with 50 or
more persons in accordance with Section 1008.1.10 IBC (675 IAC 13-2.6)
Where public or common use parking is provided, accessible parking spaces shall be provided in
accordance with IC-5-16-9 and Section 1106.1 IBC (675 IAC 13-2.6)
Handicapped seating shall be provided in accordance with Section 802 ANSI A117.1 and Chapter
11 IBC (675 IAC 13-2.6)
Fire/Smoke dampers shall be installed at all duct penetrations of rated assemblies in accordance
with Section 607.5 IMC (675 IAC 18-1.6)
Fire Hydrants shall be provided as set forth in section 507.1 IFC (675 IAC 22-2.5)
Fire Extinguisher travel distance shall be in accordance with Section 906.2 IFC (675 IAC 22-2.5)
and NFPA 10.
All Commercial Kitchen receptacles shall be Ground-Fault Circuit Interrupter protected in
accordance with Section 210.8 [B] IEC (675 IAC 17-1.8)
Bonding shall be as set forth in section 250.104 (A) (B) & (C) IEC (675 IAC 17-1.8)
Neon Lighting/Signs shall be installed as set forth in section 600.41 IEC (675 IAC 17-1.8)
Pursuant to 675 IAC 12-6-21, the issuance of a design release does not relieve the owner from
required compliance with all applicable rules of the commission, even if noncompliant conditions
appear in the plans and specifications that have been filed with the division. The owner is
responsible for correcting any and all areas of noncompliance even if they are discovered
subsequent to the issuing of this design release.
ELECTRONICALLY FILE YOUR PROJECT WITH STATE OF INDIANA at http://www.in.gov/dhs/2650.htm.
This on-line filing is through a secure site, you can use it to submit your project information, pay the fees and upload your project plans.
Use Internet Browser to View this report, other browsers are not compatible to view this report
Page 3/3
Please be advised that if an administrative review of this action is desired, a written petition for review must be filed at the above address with the
Fire Prevention and Building Safety Commission identifying the matter for which a review is sought no later than eighteen (18) days from the above -
stated date, unless the eighteenth day falls on a Saturday, a Sunday, a legal holiday under State statute, or a day in which the Department of Fire
and Building Services is closed during normal business hours. In the latter case, the filing deadline will be the first working day thereafter. If you
choose to petition, and the before-mentioned procedures are followed, your petition for review will be granted, and an administrative proceeding will
be conducted by an administrative law judge of the Fire Prevention and Building Safety Commission. If a petition for review is not filed, this Order will
be final, and you must comply with its requirements.
Code review official
Address (name,title of local official,street,city,state and ZIP code
REX MAYS
CHARLES KIPHART
ONE HAMILTON SQUARE SUITE 138
NOBLESVILLE,IN 46060
BUILDING COMMISSIONER
Fax & e-mail: 3177742559, Chuck.kiphart@hamiltoncounty.in.gov
Director, Division of Fire and Building Safety rmays@dhs.in.gov