Loading...
HomeMy WebLinkAboutSV10_Spec_SubApproval Signature: Specifying Engineer:Engineering Firm: Date: Company: Standard Location: Indoor/Outdoor Installation: Above/Below grade Weight: 9 lbs. Connections: 4" (100 mm) and 6" (150 mm) Plain End Cover: Cam Locked Gas/Water Tight Polyethylene with 16,000 lb. H20 load rating Options SUBMITTAL FCR10 >0" – 31" Field Cut Riser FCR10 (x2) >31" – 64" Field Cut Risers FCR10 (x3) >64" – 97" Field Cut Risers SPECIFICATION AND SUBMITTAL SV10 Wastewater Sampling Port page 1 of 3 24 1⁄4" (62 cm) 11 5⁄8" (30 cm) 14 1⁄2" (37 cm) 9500 Woodend Road | Edwardsville, KS 66111 | 913-951-3300 | schierproducts.com © Copyright 2020 Schier, All Rights Reserved MODEL NUMBER: SV10 DESCRIPTION: Polyethylene Wastewater Sampling Port PART #: 8065-001-01 DWG BY: B. Karrer DATE: 3/1/2020 REV: ECO: SPECIAL PRECAUTIONS Do not install this unit in any manner except as described in these instructions.Doing so may result in property damage, personal injury or death. DO NOT AIR TEST UNIT OR RISER SYSTEM! For Schier Grease Interceptor Installations - Failure to follow this guidance voids your warranty page 2 of 3 9500 Woodend Road | Edwardsville, KS 66111 | 913-951-3300 | schierproducts.com © Copyright 2020 Schier, All Rights Reserved MODEL NUMBER: SV10 DESCRIPTION: Polyethylene Wastewater Sampling Port PART #: 8065-001-01 DWG BY: B. Karrer DATE: 3/1/2020 REV: ECO: Read all instructions before installation Install in conformance with all local codes 1 3 Risers (97") Max 4 Max Water Level Risers are not designed to retain water 5 Provide at least 16" clearance above unit for routine maintenance. 3 16" min. 2 Install sampling port as close as possible to and downstream from interceptor being served ODOR ALERT! Do not install air gap on outlet side of sampling port. 6 NOTES 1. 4" plain end inlet/outlet (field modifiable to 6" plain end) 2. Unit weight: 9 lbs.; 3. Maximum operating temperature: 150º F continuous 4. Offset connections 5. 2 rolls of 33" x 2" butyl mastic tape provided for sealing build-your-own riser joints. ENGINEER SPECIFICATION GUIDE Schier Sewer Viewer™ sampling port model # SV10 shall be lifetime guaranteed and made in USA of seamless, rotationally-molded polyethylene. Sampling port shall be furnished for above or below grade installation. Cover shall provide water/ gas-tight seal and have maximum 16,000 lbs. load capacity. SPECIFICATIONS TOP VIEW SECTION A-A 24-1/4" 10-1/4" 14-1/2" Ø 11-5/8" page 3 of 3 AA ø 11-1/4" ø 9-1/4" 9500 Woodend Road | Edwardsville, KS 66111 | 913-951-3300 | schierproducts.com © Copyright 2020 Schier, All Rights Reserved MODEL NUMBER: SV10 DESCRIPTION: Polyethylene Wastewater Sampling Port PART #: 8065-001-01 DWG BY: B. Karrer DATE: 3/1/2020 REV: ECO: INLET END VIEW SIDE VIEW Riser Cut Line 6" Connection Cut Line 6" Connection Cut Line Safety Star Insert