HomeMy WebLinkAboutGN010.0EXISTING 2X4 FRAMING
DEMOLITION & FRAMING KEY
NO DEMO IN THIS ROOM
EXISTING 2X6 FRAMING
WALL SECTION TO BE REMOVED
NEW 2x4 FRAMING
NEW 2X6 FRAMING
BULK HEAD / LOWERED CEILING
2040 20402768
26682868
26681668 26682668
2668
2468
26682254
FLOOR FLOOR3
CW
CD
3
C5/TV
3
T
L
3
23'-7 1/2"
8'-7"
2'-1"6'-9"TILE
TILE
DEMO & PREP PLAN NOTES
2 REMOVE BASEBOARD AND SHOE MOULDING
1 REMOVE COUNTERTOP, CABINETS AND PLUMBING FIXTURES (TRASH)
1 REMOVE INTERIOR CASING AROUND WINDOW. USING EXISTNG
WINDOW IN CURRENT DESIGN.
3 REMOVE TILE TO SUBFLOOR
1 CUT TILE AT DOORWAY. HALLWAY FLOOR TILE TO REMAIN.
1 REMOVE DOOR CASING AND DRYWALL PER PROPOSED PLAN
1 REMOVE AND SAVE DOOR SLAB (PLACE IN GARAGE). LEAVE JAMB AND
CASING
1 REMOVE COUNTERTOP AND CABINETS OF HALLWAY BUTLER PANTRY.
1 REMOVE POCKET DOOR AND DRYWALL AS NECESSARY FOR NEW
PROPOSED DOORWAY.
1 REMOVE DOOR TRIM AND DRYWALL AS NECSSEARY FOR NEW
PROPOSED DOORWAY
1 REMOVE BUILT-IN CABINET
1 REMOVE IRONING BOARD AND SHELF/ROD.
1 REMOVE CABINETS ABOVE WASHER & DRYER
1 REMOVE DRYWALL FROM BULKHEAD ABOVE WASHER & DRYER TO
REFRAME PER PROPOSED PLAN
D1D1
D2D2
D3D3
D4D4
D5D5
D6D6
D7D7
D8D8
D9D9
D10D10
D11D11
D12D12
D13D13
D14D14
D1D1
D2D2
D3D3
D4D4
D5D5
D6D6
D7D7
D8D8
D9D9
D10D10
D11D11
D12D12
D13D13
D14D14
MEP DISCONNECT PLAN NOTES
1 DISCONNECT LAUNDRY SINK AND FAUCET
1 DISCONNECT AND REMOVED WASHER & DRYER.
MEP1MEP1
MEP2MEP2
MEP1MEP1
MEP2MEP2
D4D4
TILE
TILE
NO WORK
THIS ROOM
D4D4D2D2
D3D3
D1D1
D1D1
D5D5
MEP1MEP1
MEP2MEP2 D8D8D7D7
D6D6
D4D4
D9D9
D10D10
D11D11
D12D12
D13D13
D14D14
GARAGE
KITCHEN
DRYERWASHER
EXISTING/DEMO PLAN - 1st FLOOR
SCALE: 3/4" = 1'Boris ResidenceLaundry Remodel2972 Palace CtCarmel, IN 46032Date:Revision:
1
SHEET OF 16
SIGNATURE / SEAL
Client Initials:
Date:
The plans, including all text, drawings, concepts and ideas,
forming a part of the plans, and the selection and arrangement
thereof Copright 2018 by Custom Living, Inc., Indianapolis IN.
ALL RIGHTS RESERVED. The plans shall remain the property
of Custom Living Inc. Any use of the plans, or their content,
without the prior written permission of Custom Living. Inc is
strictly prohibited.CUSTOM LIVING5335 Winthrop AveIndianapolis IN 462208/25/20
DATE:DESIGNER: MARLA JOHNSONE: marla@customlivingusa.comC: 317.603.5551GENERAL SITE PREP & DEMO NOTES
Install plastic to seal off areas being remodeled
from rest of home as necessary.
Install floor covering for construction path from
door designated as the construction entrance to
locations of remodeling as necessary.
Install additional floor covering or wall protection
as needed over areas close to the areas of
construction activity.
Install dust control measures on HVAC cold air
returns located within the locations of
remodeling.
Custom Living can provide a HEPA Air Scrubber
to aid in airborne dust control from the start of
demolition up to priming of new drywall
depending on site conditions, Homeowner
understands that this will help to reduce airborne
dust; however, it will still not mitigate it in its
entirety.
Demolition Contractor(s) are responsible for all
labor, for the scope of work specified in the
drawings provided by Custom Living.
Homeowner understands that Custom Living
has only provided a labor and material
allowance for the scope of Demolition denoted
on the drawings, Any additional scope added or
uncovered during demolition will be a Change
Order during construction.
Homeowners understand that Decmolition work
will generate dust and noise throughout the
house, Custom Living will provide site protection
measures to reduce where possible, but
Homeowners should not expect 100%
containment.** PRINTS TO SCALE IF PRINTED ON 24" X 36" **
09/01/20