HomeMy WebLinkAboutMisc infoThe purpose of this Building Guide is to help facilitate the plan review process
The majority of permit applications are processed with little delay. The submitted documents
will help determine if the project is in compliance with building safety codes, zoning
ordinances and other applicable laws.
1 Car n 2 Car CH 3 Car Other
n Attached Sq. Footage
Rough In and Final Inspection Required
Detached Sq. Footage
Rough In and Final Inspection can be
combined if garage is not dry walled.
Manufactured trusses Yes D No d
If manufactured trusses are used, truss diagrams must be included with the building plans, for
all trusses being used. Truss diagrams must be STAMPED with the seal of the registered
architect or engineer who is responsible for that design.
Monolithic pour may be used if structure is less than 721 S.F. and more than 6' from the
primary structure (If less than 6' to the structure, the footings shall be 30" below finished
grade) and meet current zoning and set back requirements.
Monolithic Footings 721 Square Feet Maximum 6x6- w2.9 welded wire fabric or
equivalent is required when monolithic slab footing system is used. One story unless
otherwise approved by the building official. (Fire Prevention and Building Safety
Commission; 675 IAC 14-4.3-26)
□
□
8" Wx 18" Dor
12" Wx 12" D