Loading...
HomeMy WebLinkAboutDepartment Report 11-05-207 Carmel Plan Commission COMMERCIAL COMMITTEE Thursday, November 5, 2020 Department Report 4. Docket No. PZ-2020-00119 OA: Sign Standards Amendments. The applicant seeks to amend the Unified Development Ordinance in order to amend Section 5.39 Sign Standards, Sections 7.11 & 7.12 Entryway Feature Standards, Section 5.66 Food Stand Use Standards, Section 1.29 Filing Fees, and Definitions for signage. Filed by the Department of Community Services on behalf of the Carmel Plan Commission. *Updates to the Dept. Report are in blue. Project Overview: The purpose of this proposal is to add new sign types, allow different sign types for various uses, promote pedestrian scale signage, and better tailor the recently adopted (2017) Unified Development Ordinance to meet Carmel’s signage needs. Please view the informational packet for the proposed ordinance. OneZone Carmel Business Issues Committee Involvement: The Department of Community Services has worked with OneZone on the proposed revisions. Three meetings have occurred in which the proposed ordinance amendments were reviewed and explained in detail. The OneZone committee did request that instead of using the language “Front Yard” when allowing certain sign types Staff instead use “set back from”. This is now consistent throughout the UDO. OneZone will provide a letter of support to Staff in the coming days. Ordinance Amendments: 1. Introduction of Construction Fence Signage This is signage meant to showcase upcoming projects and developments during the demolition and construction phases. 25% of an entire mesh area may be used for signage. As a result of this introduction new definitions are required to outline what this type of sign is and where it may be placed. In addition, a new filling fee was added to Section 1.29 because there is potential for this type of sign to be fairly large. 2. Residential Complexes Currently the Residential Complex section does not apply to subdivisions. This section is rewritten, along with a definition change, to apply to all residential uses including attached, multiple family, single family, and two-family dwellings. The section now contains all potential signage with corresponding number, type, sign area, location, and design requirements. Because there is stark contrast in the signage needs for subdivisions and larger apartment buildings, Staff is proposing allowing sign types based on the setback of buildings. A more detailed explanation of this can be found in the point below. Also included is a reference to Section 7.11 Residential Entryway Features 3. Allowing sign types based on building setback Staff is proposing allowing sign types based on the set back of buildings. If a building or group of buildings is set back 15-ft. or greater then an Entrance, Ground, or Suspended sign is permitted. If set back 15-ft. or less then a Blade, Projecting, or Wall sign is permitted. Staff works hard to create pedestrian scale environments. Often this involves bringing buildings closer to the street, which leaves little room for ground signs. After one factors in the planting of trees & landscaping, construction of a sidewalk or path, and possible on-street parking there are not many places for a ground sign to effectively meet its purpose compared to other signs types located on buildings. This will apply to Residential Complexes, Single Tenant Buildings for Non-Residential Uses, and Multi-Tenant Buildings for Mixed-Use and Non- Residential Uses. 4. Blade & Projecting Signs Staff is proposing to differentiate between Blade and Projecting signs. Blade signs are larger vertically oriented signs that spans multiple floors on a building. Projecting signs are typically used for first floor or single-story tenants. Projecting signs have a maximum square footage of 20 sq. ft. while a Blade sign size is determined by a Spandrel Panel on the building. This allows a blade sign to fit cohesively with any architecture. A maximum square footage of 75 is allowed and is based on the sizes of all the Blade signs in Carmel. 5. Temporary Sign in C1 & C2 Districts Last year Staff amended the UDO in order to restore and clarify standards which previously applied to the C1 & C2 8 Districts but were left out during the conversion of the UDO. The Carmel Redevelopment Commission has asked that these standards also be applied to temporary signage. The CRC will have control of the location and number of temporary signs. The Sign Standards would then apply to classification, size, and design among other aspects. 6. Ground Sign Chart Staff is proposing a reduction of the overall size for Ground Signs. This occurs by decreasing the category sizes for distance of sign from the right-of-way and the maximum sign area allotment. Staff examined every new Ground Sign for the past 3 years (table contained on the following page) to make this determination. In practice signs are much smaller than they are allowed to be and typically as close to the right-of-way as possible. Of the signs with leftover square footage the average unused amount is 19.72. Of all the Ground signs reviewed only three were installed more than 50’ from the street right-of-way placing the signs in a higher category. Staff has determined this necessitates adoption of smaller categories. 7. Entryway Features Entryway Features were not present in the previous zoning ordinance and were introduced with the UDO in 2017. Entryway Features allow subdivisions and larger commercial developments to construct a structure which meets their theme or adds to the character of the area. This does not allow for larger or taller signage, but rather a taller structure. The proposed revisions are meant to mold these sections to better fit with the Sign Standards and the UDO. Specifically, a 5-ft. setback requirement is added, required ADLS or ADLS Amendment approval is added, reference to the Sign Standards is included, defined terms were capitalized, and both sections are reorganized like the structure of section 5.39 Sign Standards. Lastly a new definition was added for Entryway Features. 8. Other affected UDO Sections 5.18 Home Occupation Standards and 5.66: Food Stand Use-Specific Standards now refer to Section 5.39 Sign Standards. When the UDO was adopted in 2017 and in subsequent amendments Staff has tried to consolidate all signage standards to one section of the UDO. 9. Addition of new definitions New definitions are proposed in order to allow for new sign types and differentiate between certain sign types and uses. September 15, 2020 Public Hearing Recap: Staff gave an overview of the project, specifically the overarching goals of the Sign Standards and the major amendments. This included adjusting the Entryway Features section to fit the Carmel Sign Standards, reduction of the Ground Sign chart, inclusion of additional signage to the Residential Complex section, introduction of Construction Fence Signs, and the addition of a 15-ft. setback standard to determine sign type. Because of the large number of amendments Staff recommended that a more thorough review of all the changes occur at Commercial Committee. The Commission asked questions regarding how the proposed amendments would affect existing signs, if has Staff considered amending the Window sign section, how can the City move away from commercial looking subdivision signs, explanation of the Ground Sign Table submitted with the packet, and the reasoning for the 25% allowable sign size for Construction Fence signs. The petition was sent to the Commercial Committee on November 5th and will return to the full Plan Commission for a final recommendation onto City Council. Updates since Plan Commission: Staff added a foot-candle requirement for the Entryway Feature Lighting Section (line 763-770), which can be found highlighted in yellow in the packet. Recommendation: The Department of Community Services recommends the Commercial Committee continues this item to their next meeting on Tuesday, December 1, 2020 for further review and discussion.