HomeMy WebLinkAboutS001.0EXISTING 2X4 FRAMING
DEMOLITION & FRAMING KEY
NO DEMO IN THIS ROOM
EXISTING 2X6 FRAMING
WALL SECTION TO BE REMOVED
NEW 2x4 FRAMING
NEW 2X6 FRAMING
BULK HEAD / LOWERED CEILING
SB24
2880
4680 4068
W01
CEILING
CEILING
2-ply 14" LVL
R4
R4 R4
R4
R4
R4
6'
18'-7"
19'-8"
20'-5 1/2"
14'-10 1/8"
4'-9"
EXISTING CAPPED
PLUMBING LINE
EXERCISE ROOM
D2
D3
D4
D1
P1
E2
WINDOW WELL
D5
EXISTING HVAC DUCT
C.H. 9'-9" AFF
RUBBER TILE
UNFINISHED
STORAGE
C.H. 9'-10" AFF
CONCRETE SLAB
GRAVEL
INFILL
ENTERTAINMENT
AREA
DEMO & PREP PLAN NOTES
1
REMOVE GLASS MIRRORS FROM WALL
SURFACE, ATTEMPT TO SAVE FOR
REINSTALLATION ON NEW WALL.
1
REMOVE LOAD BEARING WALL BETWEEN
EXERCISE ROOM AND CURRENT UNFINISHED
STORAGE SPACE.
1
CUT, REMOVE AND PATCH 75 LF OF 12"
TRENCH AROUND CURRENT ROUGH-IN
PLUMBING TO PLAN FOR FUTURE ROUGH IN
PLUMBING. GENERAL CUT AREA IS SHOWN IN
DASHED RED LINES.
1 DOOR TO REMAIN IN PLACE.
1
REMOVE TWO ROWS OF RUBBER TILE
FLOORING ALONG THIS WALL. SAVE FOR
REINSTALLATION. COVER AND PROTECT ALL
OTHER RUBBER FLOORING
D1
D2
D3
D4
D5
D1
D2
D3
D4
D5
MEP DISCONNECT PLAN NOTES
1
REROUTE DRAIN PIPES IN CUT SLAB TO NEW
LOCATIONS NEEDED.
1
REMOVE ELECTRICAL SWITCHES, OUTLETS
AND KEYLESS BULBS IN THIS ROOM.
P1
E2
P1
E2
EXISTING/DEMO PLAN N
SCALE: 1/2" = 1'
BURNETT RESIDENCE
Basement Spa
1311 Regal Dr.
Carmel, IN 46032
Revision: Date:
2
SHEET OF 10
SIGNATURE / SEAL
Client Initials:
Date:
The plans, including all text, drawings, concepts, and ideas
forming a part of the plans and the selection and arrangement
thereof are Copyright 2018 of Custom Living, Inc., Indianapolis,
IN. ALL RIGHTS RESERVED. The plans shall remain the
property of Custom Living Inc. Any use of the plans or their
content without the prior written permission of Custom Living Inc.
is strictly prohibited.
CUSTOM LIVING
5335 Winthrop Ave
Indianapolis IN 46220
5/21/21
DATE:
GENERAL SITE PREP & DEMO NOTES
Install plastic to seal off areas being remodeled
from rest of home as necessary.
Install floor covering for construction path from
door designated as the construction entrance to
locations of remodeling as necessary.
Install additional floor covering or wall protection
as needed over areas close to the areas of
construction activity.
Install dust control measures on HVAC cold air
returns located within the locations of
remodeling.
Custom Living can provide a HEPA Air Scrubber
to aid in airborne dust control from the start of
demolition up to priming of new drywall
depending on site conditions. Homeowner
understands that this will help to reduce airborne
dust; however, it will not mitigate it in its entirety.
Demolition Contractor(s) are responsible for all
labor, for the scope of work specified in the
drawings provided by Custom Living.
Homeowner understands that Custom Living
has only provided a labor and material
allowance for the scope of demolition denoted
on the drawings. Any additional scope added or
uncovered during demolition result in filing a
Change Order during construction.
Homeowners understand that demolition work
will generate dust and noise throughout the
house. Custom Living will provide site protection
measures to reduce where possible, but
Homeowners should not expect 100%
containment.
[PRINTS TO SCALE IF PRINTED ON 24" X 36" ]
DESIGNER: PETER MEEHAN
E: peter@customlivingusa.com
C: 847.702.2917
05/28/21