HomeMy WebLinkAboutGN015.1
330-419-2520
www.SynEngServices.com
ajsniff@synengservices.com
2
Limitations
Installation of the solar panels must be performed in accordance with manufacturer
recommendations. All work performed must be in accordance with accepted industry-wide
methods and applicable safety standards. The contractor shall notify Synergy Engineering
Services, LLC should any damage, deterioration or discrepancies between the as-built condition
of the structure and the condition described in this letter be found. Particular attention must be
paid to the maximum allowable spacing of connections and the location of solar panels relative to
roof edges. Connections to existing roof framing must be staggered, except at array ends, so as
not to overload any existing structural member. The use of solar panel support span tables
provided by others is allowed only where the building type, site conditions, site-specific design
parameters, and solar panel configuration match the description of the span tables. Electrical
engineering is the responsibility of others. Waterproofing around the roof penetrations is the
responsibility of others. Synergy Engineering Services, LLC assumes no responsibility for
improper installation of the solar array. Synergy Engineering Services, LLC assumes no
responsibility for the effects of snow falling from roofs onto other roofs, property or persons due
to the installation of the solar array.
Very truly yours,
Synergy Engineering Services
Adam J. Sniff, P.E.
Consulting Engineer
12/01/21