HomeMy WebLinkAboutF100.3 - Finish Plan-South, South CollegeUP UP
UP
CHEM
LAB
164
STORAGE
163
STG
165
A+P
LAB
162
NURSING
LAB
146
CLASSROOM
167
STG
147
STG
149
EXAM
150
EXAM
153
ASSESSMENT
LAB
148
RADIOLOGY
LAB
166
ULTRASOUND
LAB
159
STUDY
144
IT STG
160
SERVER
161
CLASSROOM
154
EXAM
152
EXAM
151
COMPUTER LAB
170
ENTRY
169
LIBRARY /
RESOURCE LAB
168
STUDY
155
STUDY
145 SIM LAB
156
SIM
LAB
158
CONTROL
ROOM
157
FINISH PLAN
A132FINISH PLAN
DESCRIPTIONDATE
ISSUE
05.05.21 REVIEW SET
05.14.21 PERMIT SET
06.08.21 CONSTRUCTION SET
REVISIONS
DESCRIPTIONMARK DATE DB
06.08.21 AS REV 1
THIS DRAWING, AND THE IDEAS,
DESIGNS AND CONCEPTS CONTAINED
HEREIN, ARE THE EXCLUSIVE
INTELLECTUAL PROPERTY OF SCHOTT
DESIGN, INC., AND ARE NOT TO BE
USED OR REPRODUCED IN WHOLE, OR
IN PART, WITHOUT THE WRITTEN
CONSENT OF SCHOTT DESIGN.
PROJECT NUMBER
DRAWN BYPROJ. MGR 450 E. 96th StreetIndianapolis, IN 46240p: 317.387.1700www.schottdesign.comSOUTH COLLEGEPENN ON PKWY | 1ST FLOOR301 PENNSYLVANIA PKWY, INDIANAPOLIS, IN 46280AS/EHAS
2020.325
N
0 2' 4' 8' 16'
1ST FLOOR - S
AREA NOT IN CONTRACT
AREA OF WORK
PLAN NOTES
DESIGN INTENT IS FOR TRANSITION FROM CARPET TO LVT TO BE
SMOOTH WITH NO TRANSITION STRIP SINCE HEIGHT OF CARPET PILE
IS SAME HEIGHT AS LVT THICKNESS. IF NOT POSSIBLE, COORDINATE
WITH SDI.
PROVIDE CLEAR CORNER GUARD FROM FLOOR TO CEILING AT
THIS LOCATION.
PATCH COMMON CORRIDOR FINISHES AS REQUIRED AT THIS
LOCATION. COORDINATE ATTIC STOCK AND/OR SPECIFICATIONS
WITH PROPERTY MANAGER.
PROVIDE WALL TILE (WT1) FROM TOP OF TILE BASE TO 4'-0" AFF ON
ALL WALLS WITH SCHLUTER JOLLY TRIM PIECE ALONG TOP EDGE
OF TILE, FINISH: BRUSHED STAINLESS STEEL (EB). PROVIDE
WALLCOVERING (WC8) FROM TOP OF TILE TO CEILING.
PROVIDE SCHLUTER SCHIENE TRANSITION STRIP AT FLOORING
TRANSITION, FINISH: BRUSHED STAINLESS STEEL (EB). PROVIDE
LEVELING LATEX AS REQUIRED SO THAT TOP OF FINISHES ARE
LEVEL. SEAM SEAL CARPET EDGES. GC TO CONFIRM THAT
TRANSITION PROFILE IS APPROPRIATE FOR FLOORING MATERIALS.
PROVIDE MIX OF LVT2, LVT3 AND LVT4 IN THIS AREA IN ASHLAR
PATTERN. REFER TO PATTERN INSTALLATION FROM MANUFACTURER
FOR MORE INFORMATION.
PROVIDE MIX OF LVT5 AND LVT6 IN THIS AREA IN ASHLAR PATTERN.
REFER TO PATTERN INSTALLATION FROM MANUFACTURER FOR
MORE INFORMATION.
CPT1 TO BE INSTALLED IN HERRINGBONE PATTERN IN THIS
LOCATION.
LVT1 TO BE INSTALLED IN HERRINGBONE PATTERN IN THIS
LOCATION.
NOTE: NOT ALL PLAN NOTES ARE USED ON EACH SHEET.
1. REFER TO LEGEND FOR ALL ACCENT/SPECIALTY PAINT OR
WALLCOVERING THAT REQUIRES A LEVEL 5 DRYWALL FINISH. REFER
TO MANUFACTURER RECOMMENDATIONS.
2. CONTRACTOR TO EVALUATE EXISTING FLOORING CONDITIONS
AFTER DECONSTRUCTION IS COMPLETE AND PREP AS NECESSARY
PER MANUFACTURERS RECOMMENDATIONS. SEALCOAT THE
CONCRETE FLOOR PRIOR TO LAYING ADHESIVE IF DEEMED
NECESSARY.
3. AT NEW WALL TILE LOCATIONS PROVIDE APPROPRIATE SUBSTRATE FOR
WALL TILE (CEMENT BACKER BOARD) AS RECOMMENDED BY
MANUFACTURER.
4. IF FINISH SUBMITTALS ARE REQUESTED AS PART OF THIS SCOPE, THEY
ARE TO BE SUBMITTED IN DIGITAL FORMAT.
GENERAL NOTES
1
01/11/22
