Loading...
HomeMy WebLinkAboutT111 Cover SheetDWDOCUMENT APPROVALTENANT/CLIENT, UPON SIGNATURE, APPROVES ALL ASPECTS OF THE SCOPE OF WORK CONTAINEDIN THESE DOCUMENTS._________________________________________________________________ __________________TENANT/CLIENT COMPANY NAME DATE_________________________________________ ___________________________________________TENANT REPRESENTATIVE SIGNATURE TENANT REPRESENTATIVE PRINTED NAMEALL COSTS INCURRED DUE TO ANY CHANGES REQUESTED AFTER SIGN-OFF OF THESE DOCUMENTS SHALL BE THE FULL RESPONSIBILITY OF THETENANT/CLIENT.THESE DRAWINGS, AND THE IDEAS, DESIGNS AND CONCEPTS CONTAINED HEREIN, ARE THE EXCLUSIVE INTELLECTUAL PROPERTY OF SCHOTTDESIGN, INC., AND ARE NOT TO BE USED OR REPRODUCED IN WHOLE, OR IN PART, WITHOUT THE WRITTEN CONSENT OF SCHOTT DESIGN.COVER SHEET ANDGENERAL NOTEST111DESCRIPTIONDATEISSUE11.11.21REVIEW SET11.17.21 PERMIT SETREVISIONSDESCRIPTIONMARKDATE DBTHIS DRAWING, AND THE IDEAS,DESIGNS AND CONCEPTS CONTAINEDHEREIN, ARE THE EXCLUSIVEINTELLECTUAL PROPERTY OF SCHOTTDESIGN, INC., AND ARE NOT TO BEUSED OR REPRODUCED IN WHOLE, ORIN PART, WITHOUT THE WRITTENCONSENT OF SCHOTT DESIGN.450 E. 96th Street Indianapolis, IN 46240 p: 317.387.1700 www.schottdesign.comPROJECT NUMBERDRAWN BYPROJ. MGRM/O STRATEGIES PENN ON PARKWAY - SUITE 160 501 PENNSYLVANIA PKWY, INDIANAPOLIS, IN 46280CBBW2021.1041ST FLOORT111 COVER SHEET AND GENERAL PROJECT NOTESL100 LIFE SAFETY PLAND111 DECONSTRUCTION PLANA111 ARCHITECTURAL FLOOR PLANA121 REFLECTED CEILING PLANA131 FINISH PLANA211 DOOR SCHEDULE / INTERIOR DETAILSE111 ELECTRICAL PLANINDEX OF DRAWINGSVICINITY MAPNOT TO SCALENOT TO SCALEKEY PLAN - 1ST FLOORNGENERAL PROJECT NOTES1.FIRE EXTINGUISHERS: CONTRACTOR TO ENSURE ALL NEW ANDEXISTING FIRE EXTINGUISHERS ARE INSTALLED ACCORDING TO NFPA 10.COORDINATE WITH OWNER/LANDLORD ON EXTINGUISHER TYPE ANDHOUSING. MAXIMUM TRAVEL DISTANCE OF 75 FEET FROM ANY POINTTO A VISIBLE EXTINGUISHER.THE FOLLOWING NOTES APPLY ONLY IN EXISTING SPRINKLERED FACILITIES.2.DESIGN BUILD FIRE PROTECTION SYSTEM: FIRE PROTECTION WORK ISTO BE PROVIDED BY DESIGN/BUILD SERVICES UNDER THE GENERALCONTRACT. PROVIDE A COMPLETE, WORKING SYSTEM. SCHOTTDESIGN, INC. IS NOT RESPONSIBLE FOR THE DESIGN, INSTALLATION, ORRENOVATION OF THE FIRE SPRINKLER SYSTEM.3.FIRE PROTECTION SYSTEM CODE COMPLIANCE: THE DESIGN/BUILDCONTRACTOR SHALL COMPLY WITH THE INDIANA BUILDING CODE, THEINDIANA FIRE CODE, AND ALL OTHER APPLICABLE LAWS, CODES, RULESAND REGULATIONS THAT APPLY TO DESIGN AND INSTALLATION OF FIRESPRINKLER/FIRE SUPPRESSION SYSTEMS.4.FIRE PROTECTION DESIGN DRAWINGS: THE FIRE PROTECTIONCONTRACTOR SHALL GENERATE ALL REQUIRED DRAWINGS, ANDSHALL FILE THOSE DRAWINGS, AND RELATED DOCUMENTS, WITH THESTATE AND LOCAL AUTHORITIES HAVING JURISDICTION OVER THEPROJECT.5.SPRINKLER HEADS: PROVIDE NEW OR RELOCATE EXISTINGSPRINKLER HEADS AS REQUIRED. PROVIDE MISSINGCOVER/ESCUTCHEON PLATES FOR SPRINKLER HEADS WHEREAPPLICABLE. FIELD VERIFY EXISTING CONDITIONS PRIOR TO THE STARTOF WORK.FIRE PROTECTION NOTES1.STATE BUILDING COMPLIANCE FOR FINISHES: ALL FINISHES SHALLCOMPLY WITH CHAPTER 8 (INTERIOR FINISHES) OF THE INDIANA BUILDINGCODE FOR CLASS A FIRE RATINGS.2.GYPSUM ASSOCIATION CONFORMITY: FOR ALL NEW DRYWALLINSTALLATIONS, INSTALL AS RECOMMENDED BY THE GYPSUM ASSOCIATION(SUCH AS, CONTROL JOINTS, FINISH LEVELS, FASTENERS, TAPING DETAILS,CORNER BEADS, ETC.). PROVIDE NEW CEMENT BACKER BOARD AS ASUBSTRATE FOR NEW WALL TILE PER MANUFACTURER'S RECOMMENDATIONS.3.COVER PLATES: REFERENCE REFLECTED CEILING PLAN AND ELECTRICALPLAN FOR COLOR OF ELECTRICAL AND DATA DEVICES AND PLATES.REMOVE ALL PLATES BEFORE PAINTING AND REINSTALL AFTERWARD.CONTRACTOR TO CONFIRM DESIRED COLOR PRIOR TO PURCHASING NEW.4.PAINTING: ALL AREAS RECEIVING PAINT ARE TO RECEIVE PRIMER COATAND TWO (2) FINISH COATS.5.FLOORING TRANSITION STRIPS: FOR CHANGE IN FLOOR FINISHMATERIAL, PROVIDE TRANSITION STRIP AT DOOR OPENINGS AS NOTED ONFINISH PLAN UNLESS NOTED OTHERWISE (I.E. WHERE VCT MEETS CARPET).6.DELIVERY OF COMPREHENSIVE WORK PRODUCT: WHERE LIMITS OF WORKARE SHOWN, OTHER INCIDENTAL WORK LIKE PAINTING WHERE NEW OUTLETSHAVE BEEN INSTALLED, IS CONSIDERED PART OF THE SCOPE OF WORK.PROVIDE A COMPLETE AND FINISHED PRODUCT READY FOR TENANT ANDBUILDING OWNER.7.WALL DEMOLITION: REFINISH SURFACES TO MATCH EXISTING WHEREDEMOLITION HAS OCCURRED. REPAIR GYPSUM WALLBOARD WHEREDEMOLITION HAS OCCURRED AT REMAINING WALLS. REPAIR ANY GYPSUMBOARD DAMAGED BY DEMOLITION. PROVIDE EXPANSION JOINTS INDRYWALL WHERE NEW WALLS MEET OR ADJOIN TO EXISTING CORE WALLS.8.PHONE BOARDS: WHERE PHONE BOARD IS PROVIDED, PAINT BOARDWITH FIRE RETARDANT PAINT TO MATCH ADJACENT WALL FINISH.9.INTERIOR ELEVATION DETAILS: REFERENCE INTERIOR ELEVATION &SECTIONS WHERE PROVIDED FOR ADDITIONAL FINISH INFORMATION.10.PAINT & ADHESIVE VOC'S: ALL PAINTS AND ADHESIVES/SEALANTS SHALLHAVE ZERO VOC CONTENT.11.ADHESIVE MANUFACTURER RECOMMENDATIONS: ALLADHESIVES/SEALANTS TO BE USED AS RECOMMENDED BY PRODUCTMANUFACTURER.FINISH NOTES1.CASEWORK/MILLORK: CASEWORK AND MILLWORK GENERALLYINDICATED ON THESE DRAWINGS ARE TO BE PROVIDED UNDER THEGENERAL CONTRACT.2.AWI COMPLIANCE: UNLESS INDICATED OTHERWISE, COMPLYWITH ARCHITECTURAL WOODWORK INSTITUTE (A.W.I.) CURRENTSTANDARDS FOR CUSTOM GRADE WOODWORK.3.MILLWORK SHOP DRAWINGS: FURNISH SHOP DRAWINGS ON ALLMILLWORK AND CASEWORK FOR APPROVAL BY THE TENANT ANDSCHOTT DESIGN PRIOR TO FABRICATION.4.MILLWORK FIELD VERIFICATION: WHERE CASEWORK ANDMILLWORK ARE TO BE INSTALLED, VERIFY ALL DIMENSIONS ON PLANSAGAINST DIMENSIONS OF AS-BUILT CONDITIONS IN FIELD. REPORTANY DISCREPANCIES TO SCHOTT DESIGN THROUGH THE GENERALCONTRACTOR. MAKE ADJUSTMENTS TO CASEWORK AND MILLWORKTO FIT FIELD CONDITIONS UNLESS DOING SO WILL SIGNIFICANTLYALTER THE INTENT OF THE DESIGN SHOWN ON THE DRAWINGS.5.DRAWING REVIEW AND DISCREPANCIES: VERIFY FINISHES(LAMINATE, VENEER, STAINS, ETC.) ON THE SECTIONS AND ELEVATIONDRAWINGS WITH FINISHES INDICATED ON THE FINISHPLAN/SCHEDULES. IMMEDIATELY REPORT ANY DISCREPANCIES TOSCHOTT DESIGN THROUGH THE GENERAL CONTRACTOR.6.MILLWORK REQUIREMENTS: REFER TO MILLWORK SECTIONS &ELEVATIONS . UNLESS OTHERWISE SHOWN, PLASTIC LAMINATE CLADCOUNTERTOPS WITH 4" BACKSPLASH WHERE INDICATED, BACKSPLASHTO BE FIELD APPLIED. REFER TO MILLWORK SECTIONS & ELEVATIONSFOR CABINETRY SPECIFICATIONS (CUSTOM PLASTIC LAMINATE ORPRE-MANUFACTURED STOCK CABINETRY). EDGES OF PLASTICLAMINATE COUNTERTOPS, CABINETS AND DRAWERS TO BE PLASTICLAMINATE AND NOT PVC OR OTHER STOCK PLASTIC EDGING UNLESSNOTED OTHERWISE.7.MILLWORK WALL BLOCKING: PROVIDE BLOCKING IN WALLS FORALL MILLWORK, WALL STOPS, HARDWARE, AND CABINETRY WHERESPECIFIED. ALL WOOD BLOCKING TO BE FIRE RATED.MILL/CASEWORK NOTES1.DECONSTRUCTION DEFINITION: CAREFULLY DISMANTLE SPACESWITH THE GOAL OF MAXIMIZING THE REUSE POTENTIAL OF ITSCOMPONENTS.2.RECYCLING: GENERAL CONTRACTOR IS RESPONSIBLE FORRECYCLING OF ALL CARPET AND METALS AT A MINIMUM, ANDCOORDINATING THE APPROPRIATE HAULING CONTAINERS WITH THEWASTE MANAGEMENT SUB-CONTRACTOR AND KRUSE CARPETRECYCLING. REFER TO DECONSTRUCTION D111 SHEET FOR SPECIFICINSTRUCTIONS.3.EXISTING STRUCTURAL ELEMENTS OF BUILDING: NO STRUCTURALOR LOAD-BEARING CONSTRUCTION SHALL BE REMOVED,DEMOLISHED, OR DAMAGED AS A RESULT OF THIS PROJECT UNLESSSPECIFICALLY NOTED OTHERWISE ON THE DRAWINGS. PROTECT ALLEXISTING STRUCTURAL MEMBERS DURINGDEMOLITION/CONSTRUCTION. THE CONTRACTOR SHALL VERIFY INTHE FIELD, PRIOR TO DEMOLITION, THAT ALL ITEMS NOTED TO BEDEMOLISHED ARE NOT STRUCTURAL. CONTACT SCHOTT DESIGNIMMEDIATELY IF THE CONTRACTOR(S) IN THE FIELD SUSPECT THAT ANITEM NOTED FOR DEMOLITION APPEARS TO BE STRUCTURAL OROTHERWISE LOAD-BEARING. BEWARE OF STRUCTURAL COLUMNSAND/OR BEAMS THAT MAY BE CONCEALED BEHIND FINISHES THAT ARENOTED FOR REMOVAL. EXERCISE CAUTION WHEN DEMOLISHINGBUILDING FINISHES OR PARTITIONS ADJACENT TO OR AROUNDSTRUCTURAL MEMBERS. THE CONTRACTOR IS SOLELY RESPONSIBLEFOR INADVERTENT DAMAGE TO THE BUILDING STRUCTURAL SYSTEM.4.EQUIPMENT, FIXTURE, FINISH RE-USE: WHERE EQUIPMENT, FIXTURES,OR FINISHES ARE MOVED FROM ANY OTHER PART OF THE BUILDING TOBE REUSED IN THE PROJECT AREA, THE CONTRACTOR SHALL INCLUDEIN THEIR SCOPE OF WORK ANY NECESSARY PATCHING OR REPAIRINGOF THE REMAINING AREAS FROM WHERE THE ITEMS WERE RELOCATED,UNLESS OTHERWISE DIRECTED BY OWNER.5.DECONSTRUCTION PLANS: REMOVE ALL EXISTING WALLS ANDDOORS WHERE INDICATED BY NOTE, SYMBOL, OR DASHED LINES.NOTE THAT SOME ITEMS HAVE NOT BEEN SHOWN ONDECONSTRUCTION PLAN. VISIT AREA OF WORK TO ASSURE EXTENT OFDECONSTRUCTION.6.FIELD VERIFICATION OF EXISTING CONDITIONS: REMOVE ALLCARPET, VINYL BASE, VCT, WALL FABRIC, AND ANY OTHER FINISHES ASREQUIRED FOR NEW CONSTRUCTION. CONTRACTOR TO FIELD VERIFYEXISTING CONDITIONS. REFER TO FINISH PLAN/SCHEDULE FORCLARIFICATION OF EXISTING FINISHES TO REMAIN.7.PROTECTION OF BUILDING ELEMENTS TO REMAIN: USE CARE TOPROTECT EXISTING BUILDING ELEMENTS INDICATED ON THE DRAWINGSTO REMAIN SUCH AS, BUT NOT LIMITED TO, EXISTING CEILING GRID,TILES, FIRE SUPPRESSION EQUIPMENT, DIFFUSERS, LIGHT FIXTURES,EQUIPMENT, CASEWORK, AND FINISHES. THE CONTRACTOR SHALLREPLACE AND/OR REPAIR, AT THE CONTRACTOR'S COST, ANY SUCHELEMENTS DAMAGED DURING CONSTRUCTION THAT COULD HAVEOTHERWISE BEEN REASONABLY PROTECTED AND MAINTAINED INGOOD CONDITION FOR THE OWNER'S USE IN THE PROJECT.8.REMOVAL OF ABANDONED CABLING & WIRING: PER THE INDIANAELECTRICAL CODE (SPREAD OF FIRE OR PRODUCTS OF COMBUSTION)REMOVE ALL ACCESSIBLE PORTIONS OF ABANDONED CABLES ANDWIRING INCLUDING BUT NOT LIMITED TO: DATA WIRING,COMMUNICATIONS WIRING, FIRE ALARM CABLES, AUDIO CABLES,COAXIAL CABLES, FIBER OPTIC CABLES/RACEWAYS, AND PLTCCABLES. REFER TO SECTION 300.21. ANY SUCH CABLE OR WIRINGSHOULD BE PULLED AND REMOVED BACK TO THEIR MAIN SOURCESON THE FLOOR (I.E. ELECTRICAL PANELS, PHONE BOARDS, ETC.)9.PROTECTION OF ABANDONED/TERMINATED BUILDING SYSTEMELEMENTS: WHERE FIXTURES OR EQUIPMENT ARE REMOVED FROM ANYELECTRICAL, PLUMBING, MECHANICAL, OR VOICE/DATA SYSTEMS,ALL REMAINING TERMINATIONS SHALL BE CLOSED AND PROTECTED INSTRICT ACCORDANCE WITH INDUSTRY STANDARDS AND GOVERNINGSAFETY REGULATIONS OR PROCEDURES. MARK, LABEL, OR FLAG ALLTERMINATED SYSTEMS FOR FUTURE REFERENCE. CONTRACTOR TOPROVIDE AN "AS-BUILT" SET INDICATING THE LOCATION OF ALLPERMANENTLY ABANDONED SYSTEMS.10.HAZARDOUS MATERIALS: GENERAL CONTRACTOR ISRESPONSIBLE FOR IDENTIFYING ANY AND ALL ITEMS THAT MAYCONTAIN HAZARDOUS OR HARMFUL MATERIALS. ALL IDENTIFIED ITEMSMUST BE PROPERLY DISPOSED OF PER EPA AND INDIANA DEPARTMENTOF ENVIRONMENTAL MANAGEMENT RULES AND REGULATIONS.DECONSTRUCTION NOTES1.BUILDING CODE COMPLIANCE: ALL WORK SHALL COMPLY WITH THEREQUIREMENTS OF THE EXISTING BUILDING CONSTRUCTION TYPE ASDEFINED BY SECTION 601 OF THE INDIANA BUILDING CODE AND ALLAPPLICABLE STATE AND LOCAL BUILDING CODES. CONTRACTORS ARERESPONSIBLE FOR VERIFYING THE CURRENT APPLICABLE BUILDING CODE(S)FOR THEIR RESPECTIVE SCOPE OF WORK. ENSURE THAT ALL MATERIALS ANDLABOR ARE IN ACCORDANCE WITH THE BEST QUALITY STANDARDS OFEACH RESPECTIVE TRADE WHETHER SPECIFIED OR NOT. THE GENERALCONTRACTOR IS RESPONSIBLE FOR ENSURING THAT ALL WORK IS INACCORDANCE WITH ALL FEDERAL, STATE, AND LOCAL BUILDING CODES,AND STANDARDS FOR GENERAL, MECHANICAL, AND ELECTRICALCONSTRUCTION.2.CONTRACTOR SITE VISITS: CONTRACTOR(S) SHALL VISIT THE WORK SITEPRIOR TO COMMENCEMENT. THE DRAWINGS CONTAINED HEREIN MAYNOT BE ALL INCLUSIVE OF EXISTING CONDITIONS OR NEW WORKREQUIREMENTS. CONTRACTOR(S) SHALL MAKE THEMSELVES FAMILIAR WITHTHE WORK SITE IN THE FIELD IN ORDER TO BE FULLY AWARE OF THEREQUIREMENTS OF THE SCOPE OF WORK.3.CONTRACTOR FIELD VERIFICATION: FIELD VERIFY ALL DIMENSIONSAND MEASUREMENTS. INFORM THE GENERAL CONTRACTOR BEFOREBEGINNING ANY CONSTRUCTION IF EXISTING CONDITIONS PREVENTOBTAINING RESULTS AS SHOWN OR SPECIFIED. DO NOT SCALE DRAWINGS;NOTED DIMENSIONS TAKE PRECEDENCE. VERIFY EXISTING CONDITIONSINDICATED ON THE DRAWINGS AND REPORT ANY DISCREPANCIESTHROUGH THE GENERAL CONTRACTOR TO SCHOTT DESIGN, INC.4.GENERAL CONTRACTOR COORDINATION WITH OWNER: THE GENERALCONTRACTOR SHALL COORDINATE WITH THE OWNER REGARDING ALLON-SITE ACTIVITIES SUCH AS, BUT NOT LIMITED TO: WORK SCHEDULE,MATERIALS STORAGE AND HANDLING, DELIVERIES, ACCESS TO THE WORKSITE, TRAFFIC CONTROL, AND BUILDING/PUBLIC SAFETY PROCEDURESDURING CONSTRUCTION. THE CONTRACTOR SHALL ALSO COORDINATEWORK "BY OTHERS" WITH HIS/HER OWN ACTIVITIES AS NECESSARY TOEXECUTE THE OVERALL PROJECT SCOPE. THE GENERAL CONTRACTORSHALL COORDINATE WITH THE LANDLORD, DAILY WORKING HOURS,WEEKEND HOURS AND HOURS THAT MAY BE WORKED PRIOR TO ANDDURING HOLIDAYS. LANDLORD RESERVES THE RIGHT TO RESTRICTCONSTRUCTION TO NIGHTS AND WEEKENDS WHEN THAT CONSTRUCTION ISDEEMED TO INTERFERE WITH THE OPERATIONS OF ADJACENT TENANTS.5.PROJECT MATERIAL LEAD TIMES: FOR THOSE ITEMS TO BE ORDEREDREQUIRING LEAD TIME, THE CONTRACTOR SHALL COORDINATE THEPROJECT SCHEDULE ACCORDINGLY AND COMMUNICATE TO THE OWNER,TENANT, AND SCHOTT DESIGN WHEN DECISIONS MUST BE RENDERED INORDER FOR THE CONTRACTOR TO MEET THE PROJECT SCHEDULE. THEOWNER, TENANT, OR DESIGNER/ARCHITECT IS NOT RESPONSIBLE FORDELAYS RESULTING FROM THE CONTRACTOR'S FAILURE TO COMMUNICATEMATERIAL LEAD TIMES.6.MATERIAL SUBSTITUTIONS: SUBSTITUTIONS FOR SPECIFICALLY NAMEDPRODUCTS WILL NOT BE ALLOWED WITHOUT PRIOR APPROVAL FROM THEDESIGNER. SUBMIT REQUESTS FOR SUBSTITUTIONS WITH APPROPRIATESUPPORT INFORMATION TO THE DESIGNER. ALLOW REASONABLYSUFFICIENT TIME FOR THE DESIGNER TO REVIEW THE REQUEST AND RENDERA DECISION.7.SAFE WORK AREA: SCHOTT DESIGN, INC., SHALL NOT HAVE CONTROLOVER, BE IN CHARGE OF, OR BE RESPONSIBLE FOR A CONTRACTOR'SCONSTRUCTION MEANS, METHODS, SCHEDULES, SEQUENCES, OR SAFETY.THE CONTRACTORS SHALL BE RESPONSIBLE FOR MAINTAINING A SAFEENVIRONMENT FOR WORKERS AND THE PUBLIC AT ALL TIMES.8.GENERAL CONTRACTOR CLEANUP PROCEDURES: THE GENERALCONTRACTOR SHALL ESTABLISH WITH THE LANDLORD CLEANUPPROCEDURES AND GUIDELINES TO BE FOLLOWED ON A DAILY BASIS INORDER TO CONDUCT BUSINESS IN A SAFE AND CLEAN ENVIRONMENT.9.STAGING/ PARKING/ DUMPSTERS/ RESTROOMS: THE GENERALCONTRACTOR SHALL COORDINATE WITH THE LANDLORD AN AREA FORSTAGING OF CONSTRUCTION MATERIALS, EQUIPMENT, DUMPSTER ANDPARKING CONSTRUCTION AND DELIVERY VEHICLES. THE USE OF EXISTINGRESTROOM FACILITIES SHALL BE APPROVED BY THE LANDLORD. ONLYTHOSE DESIGNATED AREAS SHALL BE USED BY CONSTRUCTION CREWS.10.DUST CONTROL: THE GENERAL CONTRACTOR SHALL USE DUSTPARTITIONS TO MINIMIZE DISTURBANCES OF DAILY TENANT OPERATIONSDURING DEMOLITION AND CONSTRUCTION WORK. DUST PARTITIONS SHALLBE CONSTRUCTED OF 2X4 WOOD STUDS @ 24"O.C., INSULATION AND 6 MILVAPOR BARRIER ON EACH SIDE.11.PROJECT INSTALLATION CONFLICTS: CONTACT THE DESIGNERIMMEDIATELY IF CONFLICTS ARE DISCOVERED IN THE FIELD BETWEENCOMPONENTS OF DIFFERENT SYSTEMS THAT PREVENT THE INSTALLATION OFTHOSE COMPONENTS AS INDICATED ON THE DRAWINGS. (I.E. WHEREEXISTING MECHANICAL DUCTWORK MAY PREVENT THE INSTALLATION OFLIGHTING FIXTURES AS INDICATED ON THE CEILING PLAN).12.SCHOTT DESIGN HAZARDOUS MATERIALS WAIVER: SCHOTT DESIGN,INC., IS NOT RESPONSIBLE FOR THE IDENTIFICATION, DISCOVERY,PRESENCE, HANDLING, REMOVAL, DISPOSAL OF, OR EXPOSURE TO ANYPERSONS, THAT OF HAZARDOUS MATERIALS IN ANY FORM ON THEPROJECT SITE.13.WOOD BLOCKING IN WALLS: PROVIDE FIRE-TREATED WOODBLOCKING IN WALLS FOR ALL WALL HUNG ITEMS INCLUDING MILLWORK,WALL STOPS, CABINETRY, ETC.14.SHOP DRAWINGS: SHOP DRAWINGS OR CATALOG CUTS MUST BESUBMITTED TO SCHOTT DESIGN, INC. FOR APPROVAL ON ALL MATERIALSOR ITEMS WHERE THE CONTRACTOR CHOOSES TO DEVIATE FROM WHAT ISSHOWN ON THE DRAWINGS, OR IF THE DRAWINGS DO NOT INDICATE ASPECIFIC MANUFACTURER OR MODEL NUMBER. EXPEDITE PREPARATIONAND SUBMITTAL OF ALL SHOP DRAWINGS TO ALLOW SUFFICIENT TIME FORCHECKING, APPROVAL, ORDERING, FABRICATION, AND DELIVERY OFMATERIALS AND EQUIPMENT.15.PROJECT APPROVALS: ALL DETAILS, MATERIALS, AND INSTALLATIONSARE SUBJECT TO FIRST APPROVAL BY SCHOTT DESIGN, INC., AND FINALAPPROVAL BY THE OWNER.16.CHANGE ORDERS: REVIEW AND COORDINATE ALL NEW WORK ANDEXISTING CONDITIONS WITH ALL OTHER TRADES. FIELD WORK ORDERS &CHANGE ORDERS WILL NOT BE APPROVED FOR ANY CONDITIONS ORCONFLICTS THAT COULD HAVE BEEN ACCOUNTED FOR BY THE BIDDERDURING PRE-BID FIELD INSPECTION AND AFTER AWARD OF CONTRACT.17.FURNITURE AND EQUIPMENT EXCLUSIONS: FURNITURE, OFFICEEQUIPMENT, OFFICE PARTITION SYSTEMS, REFRIGERATORS, VENDINGMACHINES, AND OTHER SIMILAR ITEMS SHOWN DASHED ON THIS DRAWINGAND NOT ATTACHED TO THE BUILDING ARE FOR REFERENCE ONLY ANDARE NOT TO BE PROVIDED AS PART OF THE WORK UNLESS SPECIFICALLYSTATED TO BE PROVIDED.18.WALL PATCHING: PATCH ALL GYPSUM WALLBOARD AT AREAS OFELECTRICAL, DATA AND SWITCH DEVICES BEING REMOVED. PATCH HOLEWITH DRYWALL, TAPE, SPACKLE AND PREPARE FOR FINISH.19.CONSTRUCTION CLEANING: EXECUTE A THOROUGH FINAL CLEANAND INSPECTION OF THE SPACE UPON COMPLETION OF THE PROJECT. ALLSURFACES, FIXTURES, AND EQUIPMENT SHALL BE CLEAN, AND THE SPACESHALL BE TURNED OVER TO THE OWNER IN A CONDITION THAT REPRESENTSTHE HIGHEST LEVEL OF CARE AND PROFESSIONALISM. ENSURE ALLGENERAL CONTRACTOR INSTALLED APPLIANCES WORK & DO NOT LEAK.20.O & M MATERIALS: PROVIDE TO THE OWNER ALL OPERATION AND/ORMAINTENANCE MANUALS, OR INSTRUCTIONS FOR ALL EQUIPMENT ANDSYSTEMS AT THE COMPLETION OF THE PROJECT.21.PLAN DIMENSIONS: ALL PLAN DIMENSIONS ARE FROM FACE OFEXISTING FINISH TO FACE OF NEW GYPSUM BOARD WALL, OR FACE TOFACE OF NEW GYPSUM BOARD WALL. DO NOT SCALE DRAWINGS.WRITTEN DIMENSIONS GOVERN.22.WINDOW BLINDS: CONTRACTOR TO PROVIDE AN ALLOWANCE FORCLEANING EXISTING WINDOW BLINDS. REPLACE ANY DAMAGED ORMISSING WINDOW BLINDS WITH NEW TO MATCH BUILDING STANDARD.23.PERMITTING: THE GENERAL CONTRACTOR SHALL BE RESPONSIBLE FORVERIFYING THE REQUIREMENTS REGARDING LOCAL PLAN REVIEW, PERMITS,INSPECTIONS, AND FEES. THE GENERAL CONTRACTOR SHALL BERESPONSIBLE FOR SUBMITTING ALL REQUIRED DRAWINGS ANDSUPPORTING DOCUMENTS TO THE LOCAL BUILDING OFFICIAL AND/ORPERMIT DEPARTMENT. ALL REQUIRED LOCAL PERMIT FEES SHALL BE PAID BYTHE GENERAL CONTRACTOR UNLESS STIPULATED OTHERWISE IN THEOWNER/CONTRACTOR AGREEMENT.24.FIRE SEALING: FIRE SEAL ALL PENETRATIONS THROUGH RATED WALLS,FLOORS, AND CEILINGS WITH APPROVED FIRE-RATED CAULK AS DIRECTEDBY LOCAL JURISDICTIONS. CONTRACTOR TO BE AWARE THAT EXISTINGCONDITIONS ARE NOT NECESSARILY AN INDICATOR OF BUILDING TYPE.BUILDING TYPE LISTED ON LIFE SAFETY PLAN IS BASED UPON AVAILABLEINFORMATION AND FIELD VERIFICATION.25.WALL PENETRATIONS: WHERE STRUCTURAL BEAMS, DUCTWORK, ETC.PENETRATE SOUND OR FIRE RATED PARTITIONS, GYPSUM WALLBOARDWALL TO BE SCRIBED TO FIT TIGHT, CAULKED AND FIRE DAMPERED IFREQUIRED.26.FLOOR LEVELING: CONTRACTOR TO ALLOW FOR UNLEVEL FLOORCONDITIONS. ALL EXISTING FLOOR AND WALL SUBSTRATES SHALL BELEVELED AND PATCHED AS REQUIRED TO RECEIVE NEW CONSTRUCTIONAND FINISHES. ADJUST DOORS AND FRAMES AS REQUIRED.27.REPAIR GYPSUM WALLBOARD: REPAIR GYPSUM WALLBOARD WHEREDEMOLITION HAS OCCURRED AT REMAINING WALLS. REPAIR ANYGYPSUM BOARD DAMAGED BY DEMOLITION. PROVIDE EXPANSIONJOINTS IN DRYWALL WHERE NEW WALLS MEET OR ADJOIN TO EXISTINGCORE WALLS.28.EQUIPMENT INSTALLATION: ALL EQUIPMENT AND/OR FIXTURES SHALLBE INSTALLED IN STRICT ACCORDANCE WITH THE MANUFACTURER'SRECOMMENDATIONS OR INSTRUCTIONS.1.M/E/P: THE MECHANICAL, ELECTRICAL AND PLUMBING SCOPES OFWORK ARE LIMITED TO BASIC DESIGN-BUILD ALTERATIONS WHICH AREOUTLINED IN THESE PLANS. THE DESIGN-BUILD CONTRACTORS FOR EACHTRADE MUST NOTIFY THE ARCHITECT IF THEY FIND THAT THE SCOPE OFWORK EXCEEDS THE LEVEL OF MECHANICAL, ELECTRICAL OR PLUMBINGWORK INDICATED ON THESE DRAWINGS SO THAT ANY NECESSARYENGINEERING CAN OCCUR AND ADDITIONAL PLANS CAN BE FILED, ORIF ADDITIONAL INFORMATION IS NEEDED IN ORDER TO COMPLETE THEWORK IN THE FIELD.2.HVAC: MECHANICAL WORK IS LIMITED TO A DESIGN-BUILD SCOPEAND IS OUTLINED IN THESE DRAWINGS. NO NEW MAIN MECHANICALAPPLIANCES OR MAIN EQUIPMENT ARE BEING PROVIDED. ALLMECHANICAL WORK IS LIMITED TO RELOCATION OF DIFFUSERS AND FLEXDUCT PER NEW WALL LAYOUT. MECHANICAL CONTRACTOR IS TO NOTIFYAPPLICABLE PARTIES IF ADDITIONAL WORK IS REQUIRED SO THATADDITIONAL PLANS CAN BE FILED AND MUST COMPLY WITH THE INDIANAMECHANICAL CODE AND ALL OTHER APPLICABLE CODES. 3.HVAC HEAT LOADS: VERIFY HEAT LOADS OF ANY SPECIALEQUIPMENT IN THE TENANT SPACE, AND PROVIDE ADDITIONAL AIR FLOWIF REQUIRED. CONFIRM WITH OWNER PRIOR TO ANY PURCHASE OF NEWEQUIPMENT. REVISE ZONING IF REQUIRED. CONTRACTOR TO ENSURETHAT ALL HVAC ZONES ARE LOCATED APPROPRIATELY SUCH THAT NOSPLIT ZONES ARE IN OFFICES OR CONFERENCE ROOMS UNLESSAPPROVED BY BUILDING OWNER/LANDLORD.4.HVAC DIFFUSER LOCATIONS: RELOCATE AIR-SUPPLY DIFFUSERS ANDRETURN-AIR GRILLES AS REQUIRED. PROVIDE PROPER AIR SUPPLY FORDIFFUSERS AND RETURN AIR FROM RETURN AIR GRILLES. CONTRACTORSHALL PLACE DIFFUSERS AND RETURN AIR GRILLES AS REQUIRED BYCODE.5.HVAC THERMOSTAT LOCATIONS: POSITION ALL THERMOSTATSWHERE APPROPRIATE PER MECHANICAL DESIGN. COORDINATE WITHTENANT AND BUILDING OWNER FOR FURNITURE PANEL OR OTHERCONFLICTS.6.ELECTRICAL: ELECTRICAL WORK IS LIMITED TO A DESIGN-BUILDSCOPE AND IS OUTLINED IN THESE DRAWINGS. ALL ELECTRICAL WORK ISLIMITED TO ADDITIONS OR RELOCATIONS OF ELECTRICAL OUTLETDEVICES AND LIGHTING THAT DO NOT EXCEED THE CAPACITY OF THEEXISTING ELECTRICAL SERVICE IN THE BUILDING. ELECTRICALCONTRACTOR IS TO NOTIFY APPLICABLE PARTIES IF ADDITIONAL WORK ISREQUIRED SO THAT ADDITIONAL PLANS CAN BE FILED AND MUSTCOMPLY WITH ALL APPLICABLE CODES.7.ELECTRICAL CODE COMPLIANCE: COMPLY WITH THE INDIANAELECTRICAL AND MECHANICAL CODE AND ALL OTHER APPLICABLECODES.8.ELECTRICAL CIRCUITING: SIZE AND CIRCUIT ELECTRICAL POWERITEMS. PROVIDE OR REUSE ELECTRICAL POWER AND DATA OUTLETS ASREQUIRED.9.GFCI OUTLETS: ALL ELECTRICAL OUTLETS WITHIN 6'-0" OF WATER ARETO BE GFCI.10.PHONE AND DATA ACCOMMODATIONS: AT EACH PHONE/DATAJACK, PROVIDE PULL STRING FROM ABOVE CEILING TO BOX. TENANT'SDATA CONTRACTOR IS RESPONSIBLE FOR PULLING CONDUCTORS ANDPROVIDING APPROPRIATE TERMINALS AT FACE PLATE.11.ELECTRICAL SWITCH PLATES: PROVIDE COLORED FACEPLATES FORELECTRICAL OUTLETS & SWITCH PLATES TO MATCH EXISTING, UNLESSOTHERWISE NOTED. ELECTRICIAN TO FIELD VERIFY PRIOR TO PURCHASE.12.WORK STATION POWER: PROVIDE JUNCTION BOXES OR POWERPOLES AT WORKSTATIONS WHERE SHOWN. REFER TO THE PLAN FOR THEAPPROPRIATE DESIGNATIONS. DATA WILL BE RUN BY THE TENANT'S DATAVENDOR. ELECTRICIAN TO MAKE FINAL CONNECTION FROMWORKSTATION WHIP TO JUNCTION BOX. THE FURNITURE VENDOR ISRESPONSIBLE FOR WIRING THE BASE PANELS OF THE WORKSTATIONS.CONTRACTOR TO COORDINATE WITH TENANT ON WORKSTATIONFURNITURE SPECIFICATIONS TO OBTAIN CIRCUITRY REQUIREMENTS PRIORTO RUNNING ELECTRICAL CONDUITS TO JUNCTION BOXES.13.LIGHTING CIRCUITS: VERIFY EXISTING LIGHTING CIRCUITING; SIZENEW CIRCUITS AS REQUIRED. PROVIDE NEW OR REVISE EXISTINGCIRCUITING FOR NEW LAYOUT OF LIGHT FIXTURES.14.ELECTRICAL OUTLETS: ENSURE THAT ALL MOUNTING HEIGHTS OFELECTRICAL DEVICES MEET ADA REQUIREMENTS.15.LIGHTING SWITCH PLATES: WHERE MULTIPLE SWITCHES ARE SHOWN,PROVIDE (1) GANG BOX WITH A SINGLE COVER PLATE.16.FIXTURE PLACEMENT: CENTER CEILING ELEMENTS IN CEILING TILES,INCLUDING RECESSED DOWN LIGHTS, SMOKE DETECTORS, SPRINKLERHEADS, AND EXIT SIGNS UNLESS OTHERWISE NOTED.17.EMERGENCY LIGHTING: PROVIDE EMERGENCY LIGHTING IN TENANTSPACE AS REQUIRED PER NEMA AND IBC. EMERGENCY BATTERY PACKSOR LIGHTS CONNECTED TO AN EMERGENCY POWER SOURCE AREREQUIRED IF THE SPACE CONTAINS 50 PERSONS OR MORE. FIXTURESSHOWN ON PLAN ARE FOR REFERENCE ONLY.18.FIRE ALARM SYSTEM: FIRE SUPPRESSION AND FIRE ALARM SYSTEMSSHALL BE INSTALLED BY THE APPROPRIATE DESIGN-BUILD CONTRACTORAND MUST COMPLY WITH ALL APPLICABLE STATE AND LOCAL BUILDINGCODES. FIRE SUPPRESSION AND FIRE ALARM DESIGN-BUILDCONTRACTORS ARE RESPONSIBLE FOR COMPLETING AND FILING THEIRPLANS AND OBTAINING THEIR PERMITS. PROVIDE ALARM NOTIFICATIONAPPLIANCES (HORNS/STROBES), EMERGENCY SPEAKERS, SMOKEDETECTORS, FIRE PULLS, AND ANY OTHER REQUIRED ALARM &DETECTION SYSTEMS AS NECESSARY TO MEET ALL APPLICABLE CODES(INTERNATIONAL BUILDING CODE, INTERNATIONAL FIRE CODE, NFPA).19.FIRE ALARM DEVICE LOCATIONS: COORDINATE WITHOWNER/TENANT PRIOR TO INSTALLATION OF FIRE DETECTION DEVICESREGARDING ALL DEVICE LOCATIONS TO AVOID CONFLICT WITHFEATURE WALLS (CONFERENCE ROOMS AND RECEPTION AREAS) ANDTENANT-INSTALLED ITEMS (I.E. PRESENTATION BOARDS, A/V EQUIPMENTAND PROJECTION SCREENS). FAILURE TO DO SO MAY RESULT INCONTRACTOR RELOCATING THESE ITEMS AT THEIR EXPENSE.20.EXISTING LIGHT FIXTURE RELAMP: IF REQUIRED, AND AS NECESSARY,PROVIDE NEW BALLASTS AND LAMPS IN ALL LIGHTS IN EXISTING SPACES.CONSULT WITH LANDLORD.21.HVAC CONTRACTOR AIR BALANCE: CONTRACTOR TO PERFORM AIRBALANCE UPON COMPLETION OF HVAC SCOPE. PROVIDE REPORT TOLANDLORD.22.HVAC FLEX DUCT: FLEX DUCT MUST MEET ASHRAE STANDARDBUILDING CODES FOR FLEX DUCT LENGTH.23.ENGINEERED MEP DRAWINGS: THE MECHANICAL, ELECTRICAL ANDPLUMBING DESIGN-BUILD CONTRACTORS SHALL COMPLY WITH ALLAPPLICABLE STATE AND LOCAL BUILDING CODES. WHEN REQUIRED BYSTATE BUILDING CODE, THE CONTRACTOR(S) SHALL PROVIDEDESIGN/BUILD DRAWINGS FOR MECHANICAL, PLUMBING, ELECTRICAL,OR FIRE SUPPRESSION. DRAWINGS SHALL BE CERTIFIED BY A LICENSEDENGINEER AND SUBMITTED BY THE CONTRACTOR FOR STATE DESIGNREVIEW.24.EQUIPMENT INSTALLATIONS: ALL EQUIPMENT AND/OR FIXTURESSHALL BE INSTALLED IN STRICT ACCORDANCE WITH THEMANUFACTURER'S RECOMMENDATIONS OR INSTRUCTIONS.MECHANICAL & ELECTRICAL NOTES- GENERAL ADMINISTRATIVE RULES (675 IAC 12)- 1NDIANA BUILDING CODE, 2014 EDITION (IBC, 2012 EDITION, 675 IAC13-2.6)- HANDICAPPED ACCESSIBILITY CODE: 2014 INDIANA BUILDING CODECHAPTER 11, ANSI A117.1-2009, 675 IAC 13-2.6-12)- INDIANA FIRE CODE, 2014 EDITION (IFC 2012 EDITION, 675 IAC 22-2.5)- INDIANA PLUMBING CODE, 2006 EDITION (675 IAC 16-1.4)- INDIANA ELECTRICAL CODE, 2009 EDITION (2008 NFPA 70, 675 IAC17-1.8)- INDIANA MECHANICAL CODE, 2014 EDITION (IMC, 2012 EDITION, 675IAC 18-1.6)- ENERGY CONSERVATION CODE, 2010 (ASHREA 90.1, 2007 EDITION,675 IAC 19.3)EFFECTIVE CODES