HomeMy WebLinkAboutOil Separator - Striem OS-500Striem
3100 Brinkerhoff
Kansas City, KS 66115
Tel: 913-222-1500
orders@striemco.com
www.striemco.com
Made in the U.S.A
68" Typ
33"
AA
All piping by others Vent Vent
VentVent
FLOW
40" CL of 3" plain vents38" CL of
4" plain
inlet/outlet
See options to determine
available dimension range
13-1/2"
SECTION A-A
Closed top Outlet Diffuser
Finished Grade
Open top Inlet Diffuser
CPRK (4) : >11" - 90"
Corrugated Pipe Riser Kit. •
18" diameter corrugated pipe by others.•
Used in substitute of SR/LR riser options•
See CPRK specification for more detail.•
SPECIFICATIONS
4" Plain End inlet/outlet, 3" Plain End vents.1.
Max flow rate: 100 GPM2.
Capacities: Liquid: 500 gal. (67 cu. ft.); Oil: 288 gal.; Sand: 95 gal. 3.
Unit weight with composite covers: 225 lbs. (ea) 4.
With pickable cast iron covers: 345 lbs. (ea)
Maximum operating temperature 140 F continuous.5.
Highway rated covers: 16,000 lb. capacity.6.
NOTES
Snap-in Flow control (ships with unit).1.
Seamless medium density polyethylene tank.2.
Unit supplied with built-in adapter for up to 5" of3.
adjustability. Additional riser(s) available for deeper
burial depth.
Cover placement allows full access to tank4.
for proper maintenance.
Narrow footprint allows clearance through doorways5.
and down stairs.
Engineered inlet and outlet diffusers are removable to6.
inspect/clean piping.
For on the-floor or buried applications. 7.
DIFFUSION FLOW TECHNOLOGY
The inlet diffuser splits influent into three paths, creating
laminar flow and utilizing the entire liquid volume of the tank for efficient
oil separation. The calibrated openings greatly reduce influent
turbulence. The influent enters the main chamber without disturbing the
existing oil or sand layers. The bottom of the outlet diffuser allows only
effluent that is free of oil to exit the tank.
ENGINEER SPECIFICATION GUIDE
Striem Oil Reserve™ oil/sand separator model OS-500 shall
be lifetime guaranteed and made in USA of seamless,
rotationally-molded polyethylene. Separator shall be furnished
for above or below grade installation, with field adjustable riser system,
snap-in flow control and vent connections. Separator flow rate shall be
100 GPM. Separator oil capacity shall be 288 gallons. Sand capacity
shall be 95 gallons. Covers shall provide water/gas-tight seal and have
a maximum 16,000 lbs load capacity.
THIRD PARTY STRUCTURAL ANALYSIS
The OS-500 has been structurally analyzed in accordance with
the requirements of IBC 2012 and ASCE/SEI 7 for direct burial. The
maximum burial depth and backfill material are specified in our
installation instructions. The structural design has been reviewed and
sealed by a professional engineer registered in the state of California.
A sealed structural analysis report is available upon request.
OPTIONS
4M - 4" Male Thread Inlet / Outlet
6P - 6" Plain End SCH.40 Inlet / Outlet
6M - 6" Male Thread Inlet / Outlet
C24-HP (4) - H20 Rated Pickable Cast Iron Cover
CC24 (4) - Integral Membrane Clamping Collar Kit
CS3 - Clean Sweep Coalescing Media (single)*
CS6 - Clean Sweep Coalescing Media (double)*
HDK-2 (2) - High Water Anchor Kit
*Clean Sweep Coalescing Media not compatible with CPRK
RISER OPTIONS
SR24 (4) - >5"-24"
LR24 (4) - >24"-39"
SR24 (8) - >39"-43"
SR24 (4) + LR24 (4) - >43"-58"
LR24 (8) - >58"-72"
SR24 (4) + LR24 (8) - >72"-90"
DESCRIPTION:
DWG BY:DATE: REV: THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF STRIEM, LLC.
ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF STRIEM, LLC. IS
PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
WLF 5/5/21 ECO:
MODEL NUMBER: OS-500
(2) OS-100 UNITS IN SERIES
04/15/22