Loading...
HomeMy WebLinkAboutReal Event Enterprises Stage.pdfReal Event Enterprises Stage Our stage construction consists of 4 parts  Shoring frame  Cross braces  Top Bracket  And platform Shoring Frame 3' High Shoring Frame 4' Wide Shoring frames are ideally suited for supporting heavy loads. Each leg can safely support up to 10,000 lbs. Weight: 34LB Tube Specifications: Legs: 2-3/8" O.D. (.154 wall thickness) Rungs: 1-5/8" O.D. (.090 wall thickness) Note: All 4' wide shoring frames are measured center to center. Cross Braces 8' Wide 2' Tall cross Braces Weight: 12.75LB Tubing Specifications: All cross braces are fabricated from 1" O.D. galvanized steel tubing with .073" wall thickness. Cross braces are used to brace the frames with drop locks. Top Bracket Our specially designed top bracket was fabricated by wielding 4 1/8in cuts of Angle Iron on to the bottom of a standard 8” Shoring Base Plate. The use of the bracket is to be placed on top of each shoring frame to secure the stage platforms. Specifications: Standard 8”x8” x1/4” base plate/ Stem 1.9” O.D. 1/8x 2 3/8 cuts of Angle Iron Additional images Platform Our platform is constructed from standard 2x4 wall studs with standard ¾” plywood on top of the platform Standard 2x4 cross braces are located at minimum of 3 locations under the plywood platform ( extra studs are located on several platforms) Specifications: 8x4x 4 ¼ wood Final Stage  Scaffolding is assembled  Bracket is placed on top of stage (secured with pin as needed)  Platform is placed on top of brackets (shims are placed as needed) 1 platform on frame Extra center supports are placed on full stage a 2x4 never spans more than 4ft unsupported Full 12’x24’x3’ 4 ½” stage with rail Underside of 12x24 with added center supports (Outlined in blue)