HomeMy WebLinkAboutLIGHT FIXTURE S1 - PAGE 1SOLID STATE AREA LIGHTING
DSAP SERIES -PLED
FEATURES
Luminaire
Upper housing is heavy gauge cast aluminum (min..125" wall;
alloy >0.2% Cu for DSAP25) or spun aluminum with reveal (.125"
min. wall for DSAP20). Lower housing is 0.080" thick spun aluminum
with integrated LED module seat. Lower housing is vented at top
and bottom for convective cooling of LED module. Top Driver
chamber is barriered from LED Module chamber. Trulevel ball
coupling mount is welded to housing and facilitates quick leveling
and installation.
PLEDY'OptiCs
Emitters (LED's) are arrayed on a metal core PCB panel with each
emitter located on a copper thermal transfer pad and enclosed by
an LED refractor. LED optics completely seal each individual emitter
to meet an IP66 rating. In asymmetric distributions, a micro -reflector
inside the refractor re -directs the house side emitter output towards
the street side and functions as a house side shielding element.
Refractors are injection molded H12 acrylic. Each LED refractor is
sealed to the PCB over an emitter and all refractors are retained by
an aluminum frame. Any one Panel, or group of Panels in a
Iuminaire, have the same optical pattern. LED refractors produce
standard site/area distributions. Panels are field replaceable and
field rotatable in 90' increments.
ALTUMS SITE
TYPE: S1
PROJECT NAME: MFG: US ARCHITECTURAL LIGHTING
#DSAP24- PLIED- PLED-VSQ-X-80LED-700MA-
FIXTURE TYPE: NW-VOLTAGE-1
I--
25"
(635mm) 0
18.5"
(47Omm)LZ?P\
LED Emitters
High output LED's are utilized with drive currents ranging from DSAP25
350mA to 875mA. 70CPI Minimum. LED's are available in standard
Neutral White (4000K), or optional Cool White (5000K) or Warm
White (3000K). Consult Factory for other LED options.
LED Driver
Constant current electronic with a power factor of >.90 and a
minimum operating temperature of AOoF/AOoC. Driver(s) is/are UL
and cUL recognized. In -line terminal blocks facilitate wiring
between the driver and optical arrays. Drivers accept an input of
120-277V, 50/60Hz or 347VA80V, 50,60Hz. (0 - 1 OV dimmable driver
is standard. Driver has a minimum of 3KV internal surge protection.
Luminaire supplied with 20KV surge protector for field installation.)
Amber LED's
PCA (Phosphor Converted Amber) LED's utilize phosphors to
create color output similar to LPS lamps and have a slight output
in the blue spectral bandwidth. TRA (True Amber) LED's utilize
material that emits light in the amber spectral bandwidth only
without the use of phosphors.
Finish
Polyester powder coat incorporates four step iron phosphate
process to pretreat metal surface for maximum adhesion. Top
coat is baked at 400°F for maximum hardness and exterior
durability.
I
20"
(508mm)
Patent pending
(Formerly DSAPI ) Patent pending
660 West Avenue a. Palmdale. CA 93551 MADE IN THE
U.S. Pole Co Inc. Phone (661) 233-2000 Fax (661) 233-2001 cL us ■ �A 2021090 ARCHITECTURAL
www.U-Itg.— LISTED VMii 0