HomeMy WebLinkAboutPool Specs16'-6" X 32'-6" GRECIAN
DWG NO: 1006-CP PAGE: 1 OF 1 DATE: 2/11/2021Signage must be permanantly attachedaround the perimeter of the pool.
PERIMETER: 88'
NSPI SPECIFICATIONS
-IT IS RECOMMENDED TO NOT INSTALL DIVING BOARDS AND/OR SLIDING EQUIPMENT ON RESIDENTIAL POOLS. If diving boards and/or sliding equipment is installed by the contractor,such diving boards and sliding equipment MUST BE INSTALLED WITHIN THE GUIDELINESESTABLISHED BY ANSI/NSPI/ASPA RECOMMENDED STANDTARDS, AND IN ACCORDANCE WITH ALL APPLICABLE STATE AND LOCAL CODES AND REGULATIONS.
AREA (SQFT): 500
1. All dimensions given are finished dimensions. The construction methodsillustrated here are suggestions and apply only to normal ground conditions.There may be additional precautions and/or methods of construction. Theresponsibility is the contractor's
2. All pools are designed consistent to the guidelines established by NSPI'spublication, "Standards for Residential Pools". All pools must beconstructed to these standards and your local building codes.
3. A safety line, with buoys, is to be permanently attached 1'-0" to theshallow side of the point of first slope change. Different methods andprecautions may be dictated by various ground conditions. This is to bedetermined by and is the responsibiity of the contractor who is not an agentof the manufacturer of the comparts.
4. Installation is to be done in accordance with all federal, state and localbuilding codes, as well as A.N.S.I/N.S.P.I suggested standards. Bottomspecifications must meet or exceed A.N.S.I/N.S.P.I/A.P.S.P recommendedstandards.
NOTES
PANEL LAYOUT
THIS POOL IS DESIGNATED UNDER NSPI
STANDARDS AS A TYPE 0 POOL.
*NO DIVING BOARD IS ALLOWED.
*DIVING IS NOT ALLOWED FROM
ANY PART OF THIS POOL.
BILL OF MATERIALS
DESCRIPTIONQTY
48" (52" Tall)15
48" Skim+Inlet Left (52" Tall)1
24" (52" Tall)6
12" (52" Tall)2
45D Cr - S/1 (52" Tall)8
6' Straight Step1
Stl Brc Embedded Nut Brace+Stake/Clip2
Stl Brc Buttress Brace+Stake16
Stl Brc Drive Stake50
Hdw Steel Grc/Rrd Kit1
Hdw Steel Add-on Kit (3/8" Bolts-100, 3/8"
Nuts-100)
5
COPING
QTY DESCRIPTION
1 Hdw OnGround No-Diving Kit (7/Bag)
*Mandatory Safety Signage*
1 Hdw 12x1" Tek Screws - 100/Box
11 Alu Txt 8’ F-Channel ’ Straight/Radius - 1/Box
CoolPools.com
NOTE PANEL PLACEMENT FOR DESIGN PURPOSE ONLY
- Skimmer / Inlet panels should be down normal wind flow
-Lights to be located and spaced equal for lighting
24" (52" Tall)48" (52" Tall)
48" (52" Tall)48" (52" Tall)
48" (52" Tall)
48" Skim+Inlet Left (52" Tall)
24" (52" Tall)
48" (52" Tall)
4'-3"TYP
8'-0"32'-6"
48" (52" Tall)48" (52" Tall)48" (52" Tall)
6' Straight Step16'-6"4'-3" TYP.24'-0"
24" (52" Tall)
48" (52" Tall)
24" (52" Tall)
48" (52" Tall)
24" (52" Tall)
48" (52" Tall)
24" (52" Tall)
48" (52" Tall)
48" (52" Tall)48" (52" Tall)48" (52" Tall)48" (52" Tall)
45 Deg (8 PLC)
29'-1 1/2"
30'-9 1/2"
12'-11 5/8"36'-5 1/8"
36'-6 1/4"
28'-6 3/4"
12" (52" Tall)
12" (52" Tall)20'-6"36'-6"
REPRESENTS OVER DIG OF ACTUAL POOL SHAPE.
PROFILE MAY VERY BASED ON STEP LOCATION
16'-7 1/2"
16'-7 1/2"
V(Ovflc'1 �s er�m�-��
40
A04-
uor1Q I I k j
-Avl
Q..1cl-.