Loading...
HomeMy WebLinkAboutExterior_Lighting_CutSheetsDate: Aug 31, 2022 Professional Lighting Services 8851 Hague Rd Indianapolis IN 46256 Phone: (317) 844-4261 Fax: (317) 845-0268 Job Name Old Meridian PLS22-43342 Carmel IN Bid Date Aug 31, 2022 Submittal Date Aug 31, 2022 ARCHITECT: RQAW Date: Aug 31, 2022 Page 1/1 Transmittal Professional Lighting Services 8851 Hague Rd Indianapolis IN 46256 Phone: (317) 844-4261 From: MATTHEW NETHERTON FF00009 Page 1/1Visit us on the web at www.professionallightingservices.com Project Old Meridian Quote#PLS22-43342 Location Carmel IN Contact: ATTACHED WE ARE SENDING YOU 1 COPY OF THE FOLLOWING ITEM: Drawings Specifications Other: Prints Information Plans Submittals THESE ARE TRANSMITTED FOR: Prior Approval Resubmittal for Approval Record Approval Corrections Bids due on: Approval as Submitted Your Use Other: Approval as Noted Review and Comment Type MFG Part B1 NLS LIGHTING TBL-T3-16L-175-30K S2 NLS LIGHTING TRC-1-T2-16L-1-30K SW1 AFX HARW0518L30D1BK SW2 GARDCO LIGHTING PWS-140L-650-WW-G2-2-UNV SW3 GARDCO LIGHTING PWS-140L-450-WW-G2-4-UNV Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: TBL-T3-16L-175-30K Notes: Type: B1 PLS22-43342 701 Kingshill Place, Carson, CA 90746 Call Us Today (310) 341-2037 nlslighting.com Form • 2 Architectural Bollard Styles • Elegant Rectilinear Extruded Aluminum Housing • Corrosion Resistant Stainless Steel External Hardware • Sleek, low profile housing • Spec grade performance • Engineered for optimum thermal management • Archor Base Plate for easy installation • 8 Architectural finishes standard, RAL colors available Function • Micro Optics IES Distributions T2, T3, T4 • Lumileds Luxeon MX. LEDs • Dark Sky Compliant, Full Cutoff • Philips Advance 0-10V Dimming Drivers THD @ Max Load < 15% Power factor @ Max Load < 0.95 • 3000, 4000, or 5000 Kelvin • 16L TO 64L LED Configuration • 18-205 Watts (Single Head Wattage) • <CRI 70 • Extruded Aluminum Heat Sink • Driver Separate from Light Engine for Superior Thermal Management • 5 mils Powder Coat • Available with dimming control motion sensor Reliability • 30 Year Lighting Solution • L70 483,000 Hours • L90 160,000 Hours • Silicone Micro Optics • 5 Year Standard Warranty • IP 65 Rated Fixture • IP67 Optics • UL Listed • Reduces energy consumption and costs up to 65% TRAC BOLLARD LINEAR TBL 31 LED WATTAGE CHART 16L 175 milliamps 10w (765-850 Lumens) 350 milliamps 18w (1944-2470 Lumens) 530 milliamps 28w (2940-3584 Lumens) 700 milliamps 36w (3636-4428 Lumens) 1050 milliamps 56w (5408-6496 Lumens) Index Page1/5Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: TBL-T3-16L-175-30K Notes: Type: B1 PLS22-43342 Project Name:Type: Cat# 701 Kingshill Place, Carson, CA 90746 P: (310) 341-2037 nlslighting.com Trac Linear Bollard (TBL) 16 (16L) 24 in (24) 36 in (36) 42 in (42) 3000K (30K) 4000K (40K) 5000K (50K) 175 (175) 350 (35) 530 (53) 700 (7) 1050 (1) 120-277(UNV)Anchor Base(AB) Bronze Textured (BRZ) White Textured (WHT) Smooth White Gloss (SWT) Silver Textured (SVR) Black Textured (BLK) Smooth Black Gloss (SBK) Graphite Textured (GPH) Grey (GRY) Custom (CS) Surge Protector (10K) Dimming Control with Motion Sensor (UNV Voltage) (DC-8) For 8’ and below Marine Grade Finish (MGF) Dual Head (DH) Type 2 (T2) Type 3 (T3) Type 4 (T4) Light Dist.Length No. of LEDs Milliamps Kelvin Volts Mounting Color Options TBL ORDERING GUIDE 32 Index Page2/5Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: TBL-T3-16L-175-30K Notes: Type: B1 PLS22-43342 ELECTRICAL • 120-277 Volts (UNV) • 0-10V dimming driver by Philips Advance • Driver power factor at maximum load is ≥ .95, THD maximum load is 15% • All internal wiring UL certified for 600 VAC and 105°C • All drivers, controls, and sensors housed in enclosed IP-65 compartment • Lumileds Luxeon MX LED’s • CRI >70 • Color temperatures: 3000K, 4000K, 5000K OPTIONS • MARINE GRADE FINISH (MGF)—A multi-step process creating protective finishing coat against harsh environments. Chemically washed in a 5 stage cleaning system. Pre-baked, Powder coated 3-5 mils of Zinc Rich Super Durable Polyester Primer. Oven Baked. Finished Powder Coating of Super Durable Polyester Powder Coat 3-5 mil thickness. • SHIELD (HSS)—House Side Shield is designed for full property line cut-off. CONTROLS DIMMING CONTROL (DCX)—Passive infrared (PIR) sensor providing multi-level control based on motion/daylight contribution. • All control parameters adjustable via wireless configuration remote storing and transmitting sensor profiles. • DC8 mounting heights 8 feet and below • Includes 5 dimming event cycles, 0-10V dimming with motion sensing, re-programmable in the field. CONSTRUCTION • Extruded Aluminum • Internal cooling fins, Finite Element Analysis (FEA) designed • Corrosion resistant external hardware • One-piece silicone gasket ensures IP-65 seal for electronics compartment • One-piece Optics Plate™ mounting silicone Micro Optics • Two-piece silicone Micro Optic system ensures IP-67 seal around each PCB FINISH • 3-5 mils electrostatic powder coat. • NLS Light’s standard high-quality finishes prevent corrosion protects against and extreme environmental conditions WARRANTY Five-year limited warranty for drivers and LEDs. OPTICS Silicone optics high thermal stability and light output provide higher powered LEDs with minimized lumen depreciation. UV stability with scratch resistance increases exterior application durability. Silicone optics do not yellow, crack or brittle over time LISTINGS • Certified to UL 1598 • UL 8750 • CSA C22.2 No. 250.0 • IP65/ IP67 Rated DIMENSIONS DIMMING CONTROL (DCX) 36.00 7.75 3.00 5.00 D C B AA B C D 12345678 8 7 6 5 4 3 2 1 NEXT ASSY USED ON APPLICATION DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL ANGULAR: MACH 1 BEND 1 TWO PLACE DECIMAL .031 THREE PLACE DECIMAL .015 INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL FINISH DRAWN CHECKED ENG APPR. MFG APPR. Q.A. COMMENTS: DATENAME TITLE: SIZEB DWG. NO.REV WEIGHT: SCALE: NTS UNLESS OTHERWISE SPECIFIED: -- 4/1/16 TRACK BOLLARD SHEET 1 OF 1 TRCK-BLLR DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF NLS LIGHTING . ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF NLS LIGHTING . IS PROHIBITED. 19500 S. Rancho Way #105Rancho Dominguez, CA. 90220Ph: 310-341-2037 5" 36.00 7.75 3.00 5.00 D C B AA B C D 12345678 8 7 6 5 4 3 2 1 NEXT ASSY USED ON APPLICATION DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONALANGULAR: MACH 1 BEND 1TWO PLACE DECIMAL .031THREE PLACE DECIMAL .015 INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL FINISH DRAWN CHECKED ENG APPR. MFG APPR. Q.A. COMMENTS: DATENAME TITLE: SIZEB DWG. NO.REV WEIGHT: SCALE: NTS UNLESS OTHERWISE SPECIFIED: -- 4/1/16 TRACK BOLLARD SHEET 1 OF 1 TRCK-BLLR DO NOT SCALE DRAWING PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF NLS LIGHTING . ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF NLS LIGHTING . IS PROHIBITED. 19500 S. Rancho Way #105Rancho Dominguez, CA. 90220Ph: 310-341-2037 24" - 42" 7.75" 3" 701 Kingshill Place, Carson, CA 90746 P: (310) 341-2037 nlslighting.com 33 Index Page3/5Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: TBL-T3-16L-175-30K Notes: Type: B1 PLS22-43342 701 Kingshill Place, Carson, CA 90746 P: (310) 341-2037 nlslighting.com IES DISTRIBUTIONS SILICONE OPTICS T2 Optic The Type II distribution is used for narrow pathways and trails, narrow entrances of shopping centers, parking lots and office complex’s. NLS Lighting Silicone Micro Optical System technology takes quality and performance to the highest level. Vandal resistant, superior clarity—Micro Optics have become the best and lasting solution in the industry. BENEFITS • Produces superior 96% clarity • Heat resistant to 200° C, 50% higher than acrylic • Ecologically friendly—no glare • Vandal-resistant • Does not brittle, crack, or yellow over time The type III distribution is meant for roadway lighting, general parking areas and other areas where a larger area of lighting is required. Type III lighting needs to be placed to the side of the area, allowing the light to project outward and fill the area. This produces a filling light flow. Type III light distributions have a preferred lateral width of 40 degrees. This distribution is intended for luminaires mounted at or near the side of medium width roadways or areas, where the width of the roadway or area does not exceed 2.75 times the mounting height. The type IV distribution produces a semicircular light meant for mounting on the sides of buildings and walls. It’s best for illuminating the perimeter of parking areas and businesses. The intensity of the Type IV lighting has the same intensity at angles from 90 degrees to 270 degrees. Type IV light distributions have a preferred lateral width of 60 degrees. This distribution is intended for side-of-road mounting and is generally used on wide roadways where the roadway width does not exceed 3.7 times the mounting height. T4 Optic T3 Optic 34 Index Page4/5Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: TBL-T3-16L-175-30K Notes: Type: B1 PLS22-43342 701 Kingshill Place, Carson, CA 90746 P: (310) 341-2037 nlslighting.com MODEL WIDTH DEPTH LENGTH WEIGHT TBL 5”3”7.75”13.5 TEMP.TBL L70/L90 DATA L70 (64L - 1050mA)L90 (64L - 1050mA) 25°C 483,000 160,000 OPTICAL CONFIGURATIONS TBL LUMEN CHART Rotatable Optics (ROR) Rotated Right, (ROL) Rotated Left options available. Optics field and factory rotatable. OPTIC PLATE PAINTED TO MATCH FIXTURE FINISH TRAC LUMEN CHART PART NUMBER T2 LM/W T3 LM/W T4 LM/W WATTS TBL-16L-175-30K 774 77 765 77 799 80 10 TBL-16L-175-40K 799 80 791 79 825 83 10 TBL-16L-175-50K 833 73 816 82 850 85 10 TBL-16L-35-30K 1980 110 1944 108 2034 113 18 TBL-16L-35-40K 2142 119 2106 117 2196 122 18 TBL-16L-35-50K 2304 128 2268 126 2470 137 18 TBL-16L-53-30K 2968 106 2940 105 3080 110 28 TBL-16L-53-40K 3220 115 3192 114 3332 119 28 TBL-16L-53-50K 3472 124 3416 122 3584 128 28 TBL-16L-7-30K 3672 102 3636 101 3816 106 36 TBL-16L-7-40K 3996 111 3924 109 4104 114 36 TBL-16L-7-50K 4284 119 4248 118 4428 123 36 TBL-16L-1-30K 5544 99 5488 98 5408 96 56 TBL-16L-1-40K 6048 108 5936 106 5992 107 56 TBL-16L-1-50K 6496 116 6384 114 6440 115 56 TBL / 16L 35 Index Page5/5Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: TRC-1-T2-16L-1-30K Notes: Type: S2 PLS22-43342 701 Kingshill Place, Carson, CA 90746 Call Us Today (310) 341-2037 nlslighting.com Form • Elegant Rectilinear Extruded Aluminum Housing • Corrosion Resistant Stainless Steel External Hardware • Sleek, Low Profile Housing • Spec Grade Performance • Engineered For Optimum Thermal Management • Anchor Base Plate For Easy Installation • 8 Architectural Finishes Standard, RAL Colors Available Function • Micro Optics IES Distributions T2, T3, T4, T5 • Lumileds Luxeon MX. LEDs • Philips Advance 0-10V Dimming Drivers THD @ Max Load < 15% Power factor @ Max Load < 0.95 • 2700K, 3000K, 3500K, 4000K, Or 5000K • 16L LED Configuration • 18-56 Watts (Single Head Wattage) • CRI 70, 80, or 90 • Extruded Aluminum Heat Sink • 5 Mils Powder Coat • Aluminum Pole .250 Wall Reliability • Silicone Micro Optics • 5 Year Standard Warranty • IP67 Optics • Reduces Energy Consumption And Costs Up To 65% • Dark Sky Approved TRAC 1 ARCHITECTURAL 1 LED WATTAGE CHART 16L 350 milliamps 18w (2412-2596 Lumens) 530 milliamps 28w (3508-3776 Lumens) 700 milliamps 36w (4385-4720 Lumens) 1050 milliamps 56w (6022-6482 Lumens) REV. 06.14.22 Index Page1/7Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: TRC-1-T2-16L-1-30K Notes: Type: S2 PLS22-43342 Project Name:Type: Cat#Light Dist.No. of LEDs Milliamps Kelvin Temp 701 Kingshill Place, Carson, CA 90746 P: (310) 341-2037 nlslighting.com Volts Trac 1 (TRC-1) 16 (16L) 350 (35) 530 (53) 700 (7) 1050 (1) 120-277(UNV) 340-480(HV) Bronze Textured (BRZ) White Textured (WHT) Smooth White Gloss (SWT) Silver Textured (SVR) Black Textured (BLK) Smooth Black Gloss (SBK) Graphite Textured (GPH) Grey (GRY) Custom (CS) Type 2 (T2) Type 3 (T3) Type 4 (T4) Type 5 (T5) 8’ (8) 10’ (10) 12’ (12) No Pole (NO) Aluminum Pole .250 Wall Comes With 12” Anchor Base 1“ Thick, 1” Anchor Bolts Pole HeightConfig.Color Options TRC-1 ORDERING GUIDE *Ordering information for Pole & Fixture Nema 7-Pin Receptacle (PE7) Photocell (PC) FSP-211 with Motion Sensor (FSP-8) 8’ and Below (FSP-20) 9'-20'' Heights Marine Grade Finish (MGF) House Side Shield (HSS) Rotated Optic Left (ROL) Rotated Optic Right (ROR) No Options (NO) 4 3 4 4 Single(SGL) Double(D-180) MPF Triple(TRI) MPF Quad(QD) MPF(MPF) 2 2 2 2700K, 80 CRI (27K8) 3000K, 70 CRI (30K7) 3000K, 80 CRI (30K8) 3500K, 80 CRI (35K8) 4000K, 70 CRI (40K7) 4000K, 80 CRI (40K8) 5000K, 70 CRI (50K7) 5000K, 80 CRI (50K8) 1 1 1 1 Notes: 1 2 3 4 5 Consult Factory For Lead Time. Consult Factory For 90 CRI Requests. MPF Mid Pole Fixture. Consult Factory Only Available When Ordering NLS Pole Universal Voltage 120-277 3000k or warmer must be selected to meet International Dark-Sky Association certification. 5 5 5 2 Index Page2/7Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: TRC-1-T2-16L-1-30K Notes: Type: S2 PLS22-43342 701 Kingshill Place, Carson, CA 90746 P: (310) 341-2037 nlslighting.com ELECTRICAL • 120-277 Volts (UNV) or 347-480 Volts (HV) • 0-10V dimming driver by Philips Advance • Driver power factor at maximum load is ≥ .95, THD maximum load is 15% • All drivers, controls, and sensors housed in enclosed compartment • Lumileds Luxeon MX LED’s • CRI 70, 80, or 90 • Color temperatures: 2700K, 3000K, 3500K, 4000K, 5000K • Surge Protection: 20KA supplied as standard. OPTIONS • NEMA 7-Pin Receptacle (PE7). Only available when ordering NLS pole. • PHOTO CELL (PC) • DIMMING CONTROL (FSP-8) (FSP-20) (FSP-40) • MARINE GRADE FINISH (MGF)—A multi-step process creating protective finishing coat against harsh environments. Chemically washed in a 5 stage cleaning system. Pre-baked, Powder coated 3-5 mils of Zinc Rich Super Durable Polyester Primer. Oven Baked. Finished Powder Coating of Super Durable Polyester Powder Coat 3-5 mil thickness. • SHIELD (HSS)—House Side Shield is designed for full property line cut-off. • ROTATED OPTICS (ROL) (ROR) CONTROL OPTIONS FSP-211 with Motion Sensor (FSP-XX)—Passive infrared (PIR) sensor providing multi-level control based on motion/daylight contribution. • All control parameters adjustable via wireless configuration remote storing and transmitting sensor profiles. • FSP-8 mounting heights 8 feet and below • FSP-20 mounting heights 9-20 feet • Includes 5 dimming event cycles, 0-10V dimming with motion sensing, re-programmable in the field. • Motion sensor mounted to access cover • NEMA 7-PIN RECEPTACLE (PE7)—An ANSI C136.41-2013 receptacle provides electrical and mechanical interconnection between photo control cell and luminaire. Dimming receptacle available two or four dimming contacts supports 0-10 VDC dimming methods or Digital Addressable Lighting Interface (DALI), providing reliable power interconnect. CONSTRUCTION • Extruded Aluminum • Internal cooling fins • Corrosion resistant external hardware • One-piece silicone gasket ensures water tight seal for electronics compartment • Two-piece silicone Micro Optic system ensures IP67 seal around each PCB FINISH • 3-5 mils electrostatic powder coat. • NLS Lighting standard high-quality finishes prevent corrosion and protects against extreme environmental conditions WARRANTY Five-year limited warranty for drivers and LEDs. OPTICS Silicone optics high thermal stability and light output provide higher powered LEDs with minimized lumen depreciation. UV stability with scratch resistance increases exterior application durability. Silicone optics do not yellow, crack or brittle over time 3 HOUSE SIDE SHIELD DIMENSIONS FSP-211 Motion Sensor Placement 16.0 4.0 6.0 23.0 4.0 6.0 30.0 4.0 6.0 4.0 40.0 6.0 SIDE VIEW BOTTOM VIEW FRONT VIEW 48.0 SIDE VIEW BOTTOM VIEW FRONT VIEW SIDE VIEW BOTTOM VIEW FRONT VIEW SIDE VIEW BOTTOM VIEW FRONT VIEW SIDE VIEW BOTTOM VIEW FRONT VIEW 6.0 4.0 Index Page3/7Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: TRC-1-T2-16L-1-30K Notes: Type: S2 PLS22-43342 701 Kingshill Place, Carson, CA 90746 P: (310) 341-2037 nlslighting.com701 Kingshill Place, Carson, CA 90746 P: (310) 341-2037 nlslighting.com IES DISTRIBUTIONS SILICONE OPTICS T2 Optic The Type II distribution is used for narrow pathways and trails, narrow entrances of shopping centers, parking lots and office complex’s. NLS Lighting Silicone Micro Optical System technology takes quality and performance to the highest level. Vandal resistant, superior clarity—Micro Optics have become the best and lasting solution in the industry. BENEFITS • Produces superior 96% clarity • Heat resistant to 200° C, 50% higher than acrylic • Ecologically friendly—no glare • Vandal-resistant • Does not brittle, crack, or yellow over time The type III distribution is meant for roadway lighting, general parking areas and other areas where a larger area of lighting is required. Type III lighting needs to be placed to the side of the area, allowing the light to project outward and fill the area. This produces a filling light flow. Type III light distributions have a preferred lateral width of 40 degrees. This distribution is intended for luminaires mounted at or near the side of medium width roadways or areas, where the width of the roadway or area does not exceed 2.75 times the mounting height. The type IV distribution produces a semicircular light meant for mounting on the sides of buildings and walls. It’s best for illuminating the perimeter of parking areas and businesses. The intensity of the Type IV lighting has the same intensity at angles from 90 degrees to 270 degrees. Type IV light distributions have a preferred lateral width of 60 degrees. This distribution is intended for side-of-road mounting and is generally used on wide roadways where the roadway width does not exceed 3.7 times the mounting height. Type V produces a symmetrical distribution that has the same intensity at all angles. This distribution has a uniform symmetry of candlepower that is essentially the same at all lateral angles. It is meant for large, commercial parking lot lighting as well as areas where sufficient, evenly distributed light is necessary T4 Optic T3 Optic T5 Optic - Symmetrical 4 Index Page4/7Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: TRC-1-T2-16L-1-30K Notes: Type: S2 PLS22-43342 701 Kingshill Place, Carson, CA 90746 P: (310) 341-2037 nlslighting.com OPTICAL CONFIGURATIONS TRAC 1 LUMEN CHART Rotatable Optics (ROR) Rotated Right, (ROL) Rotated Left options available. Optics field and factory rotatable. TRAC LUMEN CHART PART NUMBER T2 LM/W BUG T3 LM/W BUG T4 LM/W BUG T5 LM/W BUG WATTS TRC-1-16L-35-30K7 2,412 134 B1-U0-G1 2,425 135 B1-U0-G1 2,425 135 B1-U0-G1 2,472 137 B2-U0-G0 18 TRC-1-16L-35-40K7 2,532 141 B1-U0-G1 2,546 141 B1-U0-G1 2,546 141 B1-U0-G1 2,596 144 B2-U0-G1 18 TRC-1-16L-35-50K7 2,532 141 B1-U0-G1 2,546 141 B1-U0-G1 2,546 141 B1-U0-G1 2,596 144 B2-U0-G1 18 TRC-1-16L-53-30K7 3,508 125 B1-U0-G1 3,527 126 B1-U0-G1 3,527 126 B1-U0-G1 3,596 128 B2-U0-G1 28 TRC-1-16L-53-40K7 3,683 132 B1-U0-G1 3,704 132 B1-U0-G1 3,704 132 B1-U0-G1 3,776 135 B2-U0-G1 28 TRC-1-16L-53-50K7 3,683 132 B1-U0-G1 3,704 132 B1-U0-G1 3,704 132 B1-U0-G1 3,776 135 B2-U0-G1 28 TRC-1-16L-7-30K7 4,385 122 B1-U0-G1 4,409 122 B1-U0-G1 4,409 122 B1-U0-G1 4,495 125 B3-U0-G1 36 TRC-1-16L-7-40K7 4,604 128 B1-U0-G1 4,630 129 B1-U0-G1 4,630 129 B1-U0-G1 4,720 131 B3-U0-G1 36 TRC-1-16L-7-50K7 4,604 128 B1-U0-G1 4,630 129 B1-U0-G1 4,630 129 B1-U0-G1 4,720 131 B3-U0-G1 36 TRC-1-16L-1-30K7 6,022 108 B1-U0-G1 6,056 108 B1-U0-G1 6,056 108 B1-U0-G1 6,174 110 B3-U0-G1 56 TRC-1-16L-1-40K7 6,323 113 B1-U0-G1 6,359 114 B1-U0-G1 6,359 114 B1-U0-G1 6,482 116 B3-U0-G1 56 TRC-1-16L-1-50K7 6,323 113 B1-U0-G1 6,359 114 B1-U0-G1 6,359 114 B1-U0-G2 6,482 116 B3-U0-G1 56 3000k or warmer must be selected to meet International Dark-Sky Association certification. TRC-1 / 16L 5 Index Page5/7Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: TRC-1-T2-16L-1-30K Notes: Type: S2 PLS22-43342 MODEL WIDTH DEPTH LENGTH WEIGHT TRAC - 1 6”4”16”11 EPA SGL DBL .5 1.1 Lumen Maintenance Data Ambient Temperature Drive Current L90 Hours* L70 Hours** 30,000 Hours* 50,000 Hours* 60,00 Hours* 100,000 Hours** 25°C Up to 700mA 58,000 173,000 95.7%91.6%89.6%82.1% 1050mA 48,000 143,000 94.3%89.5%87.2%78.5% *Reported extrapolations per IESNA TM-21 **Projected extrapolations per IESNA TM-21 701 Kingshill Place, Carson, CA 90746 P: (310) 341-2037 nlslighting.com PART NUMBER T2 HSS LM/W BUG T3 HSS LM/W BUG T4 HSS LM/W BUG WATTS TRC-1-16L-35-30K7 1,775 99 B0-U0-G0 1,716 95 B0-U0-G0 1,660 92 B0-U0-G0 18 TRC-1-16L-35-40K7 1,864 104 B0-U0-G0 1,802 100 B0-U0-G0 1,743 97 B0-U0-G0 18 TRC-1-16L-35-50K7 1,864 104 B0-U0-G0 1,802 100 B0-U0-G0 1,743 97 B0-U0-G1 18 TRC-1-16L-53-30K7 2,582 92 B0-U0-G1 2,496 89 B0-U0-G1 2,415 86 B0-U0-G1 28 TRC-1-16L-53-40K7 2,711 97 B0-U0-G1 2,621 94 B0-U0-G1 2,535 91 B0-U0-G1 28 TRC-1-16L-53-50K7 2,711 97 B0-U0-G1 2,621 94 B0-U0-G1 2,535 91 B0-U0-G1 28 TRC-1-16L-7-30K7 3,227 90 B1-U0-G1 3,120 87 B0-U0-G1 3,018 84 B0-U0-G1 36 TRC-1-16L-7-40K7 3,389 94 B1-U0-G1 3,276 91 B0-U0-G1 3,169 88 B0-U0-G1 36 TRC-1-16L-7-50K7 3,389 94 B1-U0-G1 3,276 91 B0-U0-G1 3,169 88 B0-U0-G1 36 TRC-1-16L-1-30K7 4,433 79 B1-U0-G1 4,285 77 B0-U0-G1 4,145 74 B1-U0-G1 56 TRC-1-16L-1-40K7 4,654 83 B1-U0-G1 4,499 80 B1-U0-G1 4,353 78 B1-U0-G1 56 TRC-1-16L-1-50K7 4,654 83 B1-U0-G1 4,499 80 B1-U0-G1 4,353 78 B1-U0-G1 56 TRAC 1 LUMEN CHART HSS Index Page6/7Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: TRC-1-T2-16L-1-30K Notes: Type: S2 PLS22-43342 701 Kingshill Place, Carson, CA 90746 P: (310) 341-2037 nlslighting.com SHAFT Rectangular Aluminum Pole (RAP) shaft (.250 Wall) is 6061 T6 Extruded Aluminum, 4 X 6 inch to provide a seamless transition into the Trac fixture. Poles have ground lug welded inside hand-hole opposite side of the pole extrusion. Pole Extrusion is conjoined to Anchor Base by welding internal and external to pole shaft. For custom configuration consult Factory. ANCHOR BOLTS All anchor bolts are fully hot dipped galvanized and come with two galvanized nuts and washers per bolt. Anchor bolts are not included for Custom Bolt Circle. Anchor Bolts are “J” style, with a 4” hook at the end for added strength.1” Anchor Bolts are 1” diameter x 36” long with a 4” long “J” hook. ANCHOR BASE Base plates are machined from 6061 Aluminum, 12” square, 1” thick with 1” anchor bolts. HAND HOLE COVER AND POLE CAP All poles come with removable machined aluminum pole cap. All poles caps are powder coated to match the pole. All base covers are made of aluminum and powder coated to match the pole. Hand Hole is constructed of 3“x 5” rectangular aluminum tubing which is welded to pole shaft for added strength. Hand Hole covers are provided with internal bridge support and also powder coated to match pole finish. FINISH All poles have minimum 3 to 5 mils powder coat finish. All poles are sandblasted prior to powder coat application. RECTANGULAR ALUMINUM POLE RECTANGULAR ALUMINUM POLE DETAIL TRAC POLE * Anchor Bolts are NOT included with Custom Bolt Circle. * Do NOT pour concrete referencing this drawing. Consult Factory. * Must Specify 4-Bolt Pattern. * Customer responsible for doing calculations if NLS pole is not ordered. 12” Base *Consult Factory for Bolt Circle Template DIMENSION RAP A 8-12 ft. or Custom Height B 6 in. C 4 in. 6 A B B B B B C C C C C A A A A TRAC FIXTURE TRAC FIXTURE TRAC FIXTURE TRAC FIXTURE TRAC FIXTURE FRONT VIEW SIDE VIEW FRONT VIEW SIDE VIEW FRONT VIEW SIDE VIEW FRONT VIEW SIDE VIEW FRONT VIEW SIDE VIEW Index Page7/7Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: HARW0518L30D1BK Notes: Type: SW1 PLS22-43342 Harrison LED Outdoor Sconce HARW Series Features This outdoor LED light is ideal for security and general lighting. For outdoor or indoor residential, commercial, and hospitality applications. Fixture mounts to a standard junction box (not included). Construction Metal construction. Standard mounting holes and hardware are included. Power supply connections must be made inside a junction box (not included). Finish All metal parts are painted with Black paint outside Copper paint inside. Electrical Input 120 VAC / 60 Hz. Compatible with residential TRIAC and ELV dimmers. Minimum starting temp -4° F/ -20°C. LED Integrated LED modules capable of producing: 12W = 1100 source lumens, 450 delivered lumens 24W = 2200 source lumens, 900 delivered lumens 3000K (CCT). Rated for 50,000 Hrs., 90 CRI. Certification All fixtures are cETLus listed for wet locations. Title 24/JA8 Compliant (outdoor only). Warranty Limited warranty: This fixture is free from defects in materials and workmanship for a period of 5 years from date of purchase. Specifications and dimensions subject to change without notice. 2345 N. Ernie Krueger Circle • Waukegan, IL. 60087 • P: 847.249.5970 • F: 847.249.2618 • AFXinc.com R0/22 DATELOCATION PREPARED BY COMMENTS CATALOG NUMBER QUANTITY FIXTURE TYPE Ordering Information: Black/Copper LED Lumens CCT H W D HARW0512L30D1BK 12W 3000K Delivered Lumens 1100 450 Source 12"18" HARW0518L30D1BK 24W 3000K 12" 4-1/2" 3" 2200 900 18" 4-1/2" 3" Index Page1/1Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: PWS-140L-650-WW-G2-2-UNV Notes: Type: SW2 PLS22-43342 PWS_PureForm_wall_sconce_comfort 05/20 page 1 of 6 Ordering guide example: PWS-140L-650-NW-G2-2-UNV-DGY Prefix PWS Number of LEDs Drive Current LED Color - Generation Distribution Emergency Voltage Options FinishDimming controls Motion sensing Photo-sensing Electrical PWS Pure- Form wall sconce 140L 140 LEDs 450 450 mA 650 650 mA 1150 1150 mA 1 1675 1675 mA 1 2100 2100 mA 1,2 WW-G2 Warm White 3000K, 70 CRI Generation 2 NW-G2 Neutral White 4000K, 70 CRI Generation 2 CW-G2 Cool White 5000K, 70 CRI Generation 2 WY-G2 Warm Yellow 2700K, 80 CRI Generation 2 3 BW-G2 Balanced White 3500K (80 CRI) Generation 2 3 AM-G2 Amber Generation 2 3,14 2 Comfort Type 2 3 Comfort Type 3 4 Comfort Type 4 EBP Emergency Battery Pack 1,7,12 EBPC Emergency Battery Pack Cold Weather 2,7,13 Leave blank to omit an emergency option UNV 120- 277V HVU 347- 480V 120 120V 208 208V 240 240V 277 277V 347 347V 480 480V DD 0-10V External dim- ming (controls by others)4 FAWS Field Adjustable Wattage Selector 4,5 SW Interface Module for SiteWise 4,5,6,8 LLC Integral wireless module 4,5,6,7 BL BL Bi-level func- tionality for motion sensor 4 DynaDimmer: Automatic Profile Dimming 4,5,7 CS50 Security 50% Dim- ming, 7 hours CM50 Median 50% Dimming, 8 hours CS30 Security 30% Dim- ming, 7 hours CM30 Median 30% Dimming, 8 hours MMRI High-Fre- quency motion sensor integral 7,9 PCB Photocon- trol Button 7,10,11 Fusing F1 Single (120, 277, 347VAC) 10 F2 Double (208, 240, 480VAC) 10 F3 Canadian Double Pull (208, 240, 480VAC) 10 Surge Protection (10kA is standard) SP2 Increased 20kA Textured BK Black WH White BZ Bronze DGY Dark Gray MGY Medium Gray Customer specified RAL Specify optional color or RAL (ex: RAL7024) CC Custom color (Must supply color chip for required factory quote) 1. 1150, 1675, and 2100mA not available with emergency battery backup (EBP). 2. 2100mA not available with emergency battery backup cold weather (EBPC). 3. Extended lead times apply. Contact factory for details. 4. Not available with other dimming control options. 5. Not available with motion sensor. 6. Not available with photocontrol. 7. Not available in 347 or 480V. 8. Available only in 120 or 277V. 9. MMRI not available with emergency battery backup cold weather (EBPC). 10. Must specify input voltage. 11. Not available with SiteWise (SW) and wireless control (LLC). 12. Not available with SiteWise (SW) or Dynadimmer (CS/CM). 13. Not available with SiteWise (SW), Wireless control (LLC), or DynaDimmer (CS/CM). 14. Not available in 2100mA. Gardco PureForm LED wall sconce comfort PWS offers a sleek, low profile design that will complement a range of architectural styles. Comfort optics are designed to enhance visual comfort by reducing glare. PureForm wall sconce provides up to 10,700 lumens to accommodate multiple mounting heights, and is available with Type 2, 3, 4, optical distributions. A full range of control options is available for additional energy savings. Optional emergency battery backup option is available for path-of-egress and is integral to the luminaire. Project: Location: Cat.No: Type: Lamps: Qty: Notes: Wall Mount PureForm LED wall sconce with comfort optics Index Page1/6Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: PWS-140L-650-WW-G2-2-UNV Notes: Type: SW2 PLS22-43342 PWS_PureForm_wall_sconce_comfort 05/20 page 2 of 6 Dimensions Luminaire Accessories (order separately) Mounting Accessories Wall Mount PWS-WS-G2 Wall Mounted Box for Surface Conduit Painted Black Wireless system remote controller accessory Wireless system offers a remote radio/sensor module that allows connection to a Limelight system (sold by others). Remote module can be mounted to wall or pole with j-box supplied. May be specified by choosing one of two different lenses to accommodate a variety of mounting heights/sensor detection ranges. Must specify option DD on luminaires that are planned to be used with remote mount controllers. Luminaire weights PureForm LED wall sconce PWS Weight Luminaire 20 lbs Luminaire - EBP (EM battery pack) 22 lbs Luminaire - EBPC (EM battery pack cold weather) 25 lbs System accessories Wireless system remote mount module LLCR2-(F) #2 lens - specify finish in place of (F) LLCR3-(F) #3 lens - specify finish in place of (F) Central Remote Motion Response (used connected to SiteWise main panel) MS2-A-FVR-3 MS2-A-FVR-7 15.66"(39.8 cm) 6.16"(15.6 cm) 15.58"(39.6 cm) PWS PureForm LED wall sconce wall mount - with Comfort Optics 3/4 - 14 NPSM CONDUIT TOP FEED 3/4 - 14 NPSM CONDUIT TOP FEED 3/4 - 14 NPSM CONDUIT BACKFEED 1/2 - 14 NPSM CONDUIT BACKFEED 2.25” (5.7cm) 4.00” (10.2cm)FOUR Ø0.38” (Ø0.95cm) HOLES FOR MOUNTING 3/4 - 14 NPSM CONDUIT TOP FEED 3/4 - 14 NPSM CONDUIT TOP FEED 3/4 - 14 NPSM CONDUIT BACKFEED 1/2 - 14 NPSM CONDUIT BACKFEED 2.25” (5.7cm) 4.00” (10.2cm)FOUR Ø0.38” (Ø0.95cm) HOLES FOR MOUNTING Index Page2/6Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: PWS-140L-650-WW-G2-2-UNV Notes: Type: SW2 PLS22-43342 PWS_PureForm_wall_sconce_comfort 05/20 page 3 of 6 LED Wattage and Lumen Values - 3000K Ordering Code LED Qty LED Current (mA) Color Temp. Average System Watts Type 2 Type 3 Type 4 Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) PWS-140L-450-WW-G2-x 140 450 3000 22 2364 B1-U0-G1 106 2429 B1-U0-G1 109 2579 B1-U0-G1 116 PWS-140L-650-WW-G2-x 140 650 3000 30 3295 B2-U0-G2 108 3387 B2-U0-G2 111 3596 B1-U0-G1 118 PWS-140L-1150-WW-G2-x 140 1150 3000 52 5696 B2-U0-G2 109 5855 B2-U0-G2 112 6215 B2-U0-G2 119 PWS-140L-1675-WW-G2-x 140 1675 3000 76 7907 B3-U0-G3 104 8129 B3-U0-G3 107 8628 B3-U0-G3 114 PWS-140L-2100-WW-G2-x 140 2100 3000 96 9467 B3-U0-G3 99 9732 B3-U0-G3 102 10330 B3-U0-G3 108 Values from photometric tests performed in accordance with IESNA LM-79 and are representative of the configurations shown. Actual performance may vary due to installation and environmental variables, LED and driver tolerances, and field measurement considerations. It is highly recommended to confirm performance with a photometric layout. NOTE: Some data may be scaled based on tests of similar (but not identical) luminaires. Contact factory for configurations not shown. PWS PureForm LED wall sconce wall mount - with Comfort Optics LED Wattage and Lumen Values - 4000K Ordering Code LED Qty LED Current (mA) Color Temp. Average System Watts Type 2 Type 3 Type 4 Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) PWS-140L-450-NW-G2-x 140 450 4000 22 2448 B1-U0-G1 110 2516 B1-U0-G1 113 2671 B1-U0-G1 120 PWS-140L-650-NW-G2-x 140 650 4000 30 3412 B2-U0-G2 112 3508 B2-U0-G2 115 3724 B1-U0-G1 123 PWS-140L-1150-NW-G2-x 140 1150 4000 52 5899 B2-U0-G2 113 6064 B2-U0-G2 116 6436 B2-U0-G2 123 PWS-140L-1675-NW-G2-x 140 1675 4000 76 8189 B3-U0-G3 108 8419 B3-U0-G3 111 8935 B3-U0-G3 118 PWS-140L-2100-NW-G2-x 140 2100 4000 96 9804 B3-U0-G3 102 10079 B3-U0-G3 105 10698 B3-U0-G3 112 Values from photometric tests performed in accordance with IESNA LM-79 and are representative of the configurations shown. Actual performance may vary due to installation and environmental variables, LED and driver tolerances, and field measurement considerations. It is highly recommended to confirm performance with a photometric layout. NOTE: Some data may be scaled based on tests of similar (but not identical) luminaires. Contact factory for configurations not shown. LED Wattage and Lumen Values - 5000K Ordering Code LED Qty LED Current (mA) Color Temp. Average System Watts Type 2 Type 3 Type 4 Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) PWS-140L-450-CW-G2-x 140 450 5000 22 2560 B1-U0-G1 115 2631 B1-U0-G1 118 2793 B1-U0-G1 125 PWS-140L-650-CW-G2-x 140 650 5000 30 3568 B2-U0-G2 117 3669 B2-U0-G2 121 3895 B2-U0-G2 128 PWS-140L-1150-CW-G2-x 140 1150 5000 52 6169 B2-U0-G2 118 6342 B3-U0-G3 121 6731 B2-U0-G2 129 PWS-140L-1675-CW-G2-x 140 1675 5000 76 8564 B3-U0-G3 113 8805 B3-U0-G3 116 9344 B3-U0-G3 123 PWS-140L-2100-CW-G2-x 140 2100 5000 96 10253 B3-U0-G3 107 10541 B3-U0-G3 110 11188 B3-U0-G3 117 Values from photometric tests performed in accordance with IESNA LM-79 and are representative of the configurations shown. Actual performance may vary due to installation and environmental variables, LED and driver tolerances, and field measurement considerations. It is highly recommended to confirm performance with a photometric layout. NOTE: Some data may be scaled based on tests of similar (but not identical) luminaires. Contact factory for configurations not shown. Index Page3/6Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: PWS-140L-650-WW-G2-2-UNV Notes: Type: SW2 PLS22-43342 PWS_PureForm_wall_sconce_comfort 05/20 page 4 of 6 Optical Distributions LED Wattage and Lumen Values (Emergency Mode)Lumen Outputs Ordering Code LED Qty LED Current (mA) Color Temp. Temp. Range (°C) Avg. System Watts Type 2 Type 3 Type 4 Normal Mode Emergen- cy Mode Normal Mode Emergen- cy Mode Normal Mode Emergen- cy Mode Normal Mode Emergen- cy Mode PWS-140L-450-NW-G2-x-EBP-UNV 140 450 4000 0 to 40 22 10 2448 1376 2516 1415 2671 1502 PWS-140L-650-NW-G2-x-EBP-UNV 140 650 4000 0 to 40 30 10 3412 1376 3508 1415 3724 1502 PWS-140L-450-NW-G2-x-EBPC-UNV 140 450 4000 -20 to 40 22 18 2448 1964 2516 2019 2671 2143 PWS-140L-650-NW-G2-x-EBPC-UNV 140 650 4000 -20 to 40 30 18 3412 1964 3508 2019 3724 2143 PWS-140L-1150-NW-G2-x-EBPC-UNV 140 1150 4000 -20 to 40 52 18 5899 1964 6064 2019 6436 2143 PWS-140L-1675-NW-G2-x-EBPC-UNV 140 1675 4000 -20 to 40 75 18 8189 1964 8419 2019 8935 2143 Based on 20' mounting height Comfort Type 2 Comfort Type 4Comfort Type 3 0.2 fc 0.5 fc 1 fc 2 fc 1 MH2 MH3 MH 1 MH 2 MH 3 MH 4 MH4 MH 1 MH 2 MH 3 MH 1 MH 2 MH 3 MH 0.2 fc 0.5 fc 1 fc 2 fc 1 MH2 MH3 MH 1 MH 2 MH 3 MH 4 MH4 MH 1 MH 2 MH 3 MH 4 MH 1 MH2 MH3 MH 1 MH 2 MH 3 MH 4 MH 0.2 fc 0.5 fc 1 fc 2 fc1 fc Predicted Lumen Depreciation Data Predicted performance derived from LED manufacturer’s data and engineering design estimates, based on IESNA LM-80 methodology. Actual experience may vary due to field application conditions.L70 is the predicted time when LED performance depreciates to 70% of initial lumen output. Calculated per IESNA TM21-11. Published L70 hours limited to 6 times actual LED test hours Ambient Temperature °C Drive current Calculated L70 Hours L70 per TM-21 Lumen Maintenance % at 60,000 hrs 25°C up to 2100 mA >100,000 hours >42,000 hours >88% For emergency EBPC option, publish values are based on initial lumens. PWS PureForm LED wall sconce wall mount - with Comfort Optics Index Page4/6Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: PWS-140L-650-WW-G2-2-UNV Notes: Type: SW2 PLS22-43342 PWS_PureForm_wall_sconce_comfort 05/20 page 5 of 6 Specifications Housing Main body housing and door frame made of low copper die cast aluminum alloy for a high resistance to corrosion. Door hinges secured by aircraft cable to allow access to driver or other electronic components for servicing. The door frame acts as the main heat transfer component and it is optimized to allowing the main housing to have no fins, giving the freedom to have a clean minimalist aesthetic design while allowing it to house emergency battery backup equipment and various other options. Luminaire housing rated to IP65, tested in accordance to Section 9 of IEC 60598-1. Light engine Light guide technology provides low-glare, uniform illumination. Composed of 140 LEDs strategically positioned on the edge of the optical plate. Light engine luminous opening size optimized to best achieve a balance between lumen output and optical performance with the need to provide visual comfort. Light engine frame ensures contact with housing to provide heat conduction and sealing against the elements. Light engine is RoHS compliant. Standard color temperatures: 3000K +/- 130K, 4000K+/- 130K, 5000K +/- 225K. Minimum CRI of 70. Also available in 2700K and Amber (>590nm) with extended lead times. Contact factory for details. LED light engine is rated IP65 in accordance to Section 9 of IEC 60598-1. Energy saving benefits System efficacy up to 122 lms/W with significant energy savings over Pulse Start Metal Halide luminaires. Optional control options provide added energy savings during unoccupied periods. Optical systems The advanced LED comfort optical system provides Types 2, 3, and 4. Composed of high performance UV-stabilized optical grade lens with molded micro-optics to achieve desired distribution optimized to get a exceptional lighting uniformity. Performance tested per LM-79 and TM-15 (IESNA) certifying its photometric performance. Luminaire designed with 0% uplight (U0 per IESNA TM-15). Mounting Mounting is completed through integral back plate that features a separate recessed feature for hook and lock quick mount plate that secures with two set screws from bottom of luminaire. Luminaire ships fully assembled, ready to install. Control options 0-10V dimming (DD): Access to 0-10V dimming leads supplied through back of luminaire (for secondary dimming controls by others). Cannot be used with other control options. Field Adjustable Wattage Selector (FAWS): Luminaire equipped with the ability to manually adjust the wattage in the field to reduce total luminaire lumen output and light levels. Comes pre-set to the highest position at the lumen output selected. Use chart below to estimate reduction in lumen output desired. Cannot be used with other control options or motion response. SiteWise (SW): SiteWise system includes a controller fully integrated in the luminaire that enables the luminaires to communicate with a dimming signal transmitter cabinet located on site using patented central dimming technology. A locally accessible mobile app allows users to access the system and set functionalities such as ON/OFF, dimming levels and scheduling. Cannot be used with other control options, motion response or photocell options. Additional functionalities are available such as communication with indoor lighting and connection to BMS systems. Complete information on the control system can be found on the SiteWise website at signify.com/sitewise. Automatic Profile Dimming (CS/CM): Standard dimming profiles provide flexibility towards energy savings goals while optimizing light levels during specific dark hours. Dimming profiles include two dimming settings including dim to 30% or 50% of the total lumen output. Automatic dimming profile scheduled with the following settings: • CS50/CS30: Security for 7 hours night duration (Ex., 11 PM - 6 AM) • CM50/CM30: Median for 8 hours night duration (Ex., 10 PM - 6 AM) All above profiles are calculated from mid point of the night. Dimming is set for 6 hours after the mid point and 2, or 3 hours before depending of the duration of dimming. Cannot be used with other dimming control options. Emergency Battery Backup Cold Pack (EBP/EBPC): Emergency battery packs included integral to the luminaire, allowing for a consistent look between emergency and non-emergency luminaires. A separate surface mount accessory box is not required. EBP is suitable for use in ambient temperature conditions from 0°C (32°F) to 40°C (100°F) available on 450mA and 650mA only. EBPC cold weather rated down to -20°C (-4°F) available on all wattage except the 2100mA configuration. Both systems are designed to have a secondary driver with relay to immediately detect AC power loss to power luminaire for a minimum of 90 minutes from the time power is lost. Available with 120-277V, or 'UNV' only. Wireless system (LLC): Optional wireless controller integral to luminaire ready to be connected to a Limelight system (sold by others). The system allows you to wirelessly manage the entire site, independent lighting groups or individual luminaires while on-site or remotely. Based on a high-density mesh network with an easy to use web-based portal, you can conveniently access, monitor and manage your lighting network remotely. Wireless controls can be combined with site and area, pedestrian, and parking garage luminaires as well, for a completely connected outdoor solution. Motion response capability can be installed in other luminaires in the mesh or on a remote pod accessory where pod is mounted to pole or wall. Motion response options Bi-Level Infrared Motion Response (BL-MMRI): High frequency (5.8GHz +/- 75MHz microwave ISM wave band with <0.5 mW transmitting power) motion sensor is mounted integral to the luminaire. This bi-level motion sensor is designed to detect motion through the light engine so it can be used inside the luminaire without any protruded components. Sensor allows energy savings and meeting code requirements without compromising comfort and aesthetics. The product comes with factory pre-programmed standard settings including a dimming level of 30%, hold time of 3 minutes with no stand-by period. This means that in operations, the sensor will keep the luminaire at 30% of total lumen output and when motion is detected, the luminaire returns to 100% output. It will remain on full power for 3 minutes default prior to dimming back to low when no motion is observed. Other dimming levels, holding times, and stand-by periods are possible. Please contact factory technical support for details. FAWS Position Percent of Typical Lumen Output 1 25% 2 50% 3 55% 4 65% 5 75% 6 80% 7 85% 8 90% 9 95% 10 100% Note: Typical value accuracy +/- 5% 6' 6' 6'6'12'18'12'12'18'18' 12' 18' 24'24' 24' 15 ft [4.6 m] Recommended max. mtg height Strong detection range Limiteddetection range Limited detection range Strong detection range PWS PureForm LED wall sconce wall mount - with Comfort Optics Index Page5/6Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: PWS-140L-650-WW-G2-2-UNV Notes: Type: SW2 PLS22-43342 Electrical Driver: Driver efficiency (>90% standard). 120-480V available (restrictions apply). Open/short circuit protection. Optional 0-10V dimming to 10% power. RoHS compliant. Button Photocontrol (PCB): Button style design for internal luminaires mounting applications. The photocontrol is constructed of a high impact UV stabilized polycarbonate housing. Rated voltage of 120V or 208-277V with a load rating of 1000 VA. The photocell will turn on with 1-4Fc of ambient light. Surge protection (SP1/SP2): Each luminaire is provided as standard with surge protector tested in accordance with ANSI/IEEE C62.45 per ANSI/ IEEE C62.41.2 Scenario I Category C High Exposure 10kV/5kA waveforms for Line Ground, Line Neutral and Neutral Ground, and in accordance with U.S. DOE (Department of Energy) MSSLC (Municipal Solid-State Street Lighting Consortium) Model Specification for LED Roadway Luminaires Appendix D Electrical Immunity High Test Level 10kV / 5kA. Optional 20kV is available for additional protection. Listings UL/cUL listed to the UL 1598 standard, suitable for wet locations when mounted downward facing. Also listed for damp locations when inverted upward facing when mounted in covered ceiling application. Suitable for use in ambient temperatures from -40° to 40°C (-40° to 104°F). Most PureForm PWS configurations are qualified under Standard DesignLights Consortium® category. Consult DLC Qualified Products list for more details. CCTs 3000K and warmer are IDA Dark Sky Approved. Finish Each standard color luminaire receives a fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) textured polyester powdercoat finish. The surface treatment achieves a minimum of 1000 hours for salt spray resistant finish in accordance with testing performed and per ASTM B117 standard. Standard colors include bronze (BZ), black (BK), white (WH), dark gray (DGY), and medium gray (MGY). Consult factory for specs on optional or custom colors. Warranty PureForm luminaires feature a 5-year limited warranty. See signify.com/warranties for complete details and exclusions. Specifications (cont'd) PWS PureForm LED wall sconce wall mount - with Comfort Optics © 2020 Signify Holding. All rights reserved. The information provided herein is subject to change, without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. PWS_PureForm_wall_sconce_comfort 05/20 page 6 of 6 Signify North America Corporation 200 Franklin Square Drive, Somerset, NJ 08873 Telephone 855-486-2216 Signify Canada Ltd. 281 Hillmount Road, Markham, ON, Canada L6C 2S3 Telephone 800-668-9008 All trademarks are owned by Signify Holding or their respective owners. www.gardcolighting.com Index Page6/6Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: PWS-140L-450-WW-G2-4-UNV Notes: Type: SW3 PLS22-43342 PWS_PureForm_wall_sconce_comfort 05/20 page 1 of 6 Ordering guide example: PWS-140L-650-NW-G2-2-UNV-DGY Prefix PWS Number of LEDs Drive Current LED Color - Generation Distribution Emergency Voltage Options FinishDimming controls Motion sensing Photo-sensing Electrical PWS Pure- Form wall sconce 140L 140 LEDs 450 450 mA 650 650 mA 1150 1150 mA 1 1675 1675 mA 1 2100 2100 mA 1,2 WW-G2 Warm White 3000K, 70 CRI Generation 2 NW-G2 Neutral White 4000K, 70 CRI Generation 2 CW-G2 Cool White 5000K, 70 CRI Generation 2 WY-G2 Warm Yellow 2700K, 80 CRI Generation 2 3 BW-G2 Balanced White 3500K (80 CRI) Generation 2 3 AM-G2 Amber Generation 2 3,14 2 Comfort Type 2 3 Comfort Type 3 4 Comfort Type 4 EBP Emergency Battery Pack 1,7,12 EBPC Emergency Battery Pack Cold Weather 2,7,13 Leave blank to omit an emergency option UNV 120- 277V HVU 347- 480V 120 120V 208 208V 240 240V 277 277V 347 347V 480 480V DD 0-10V External dim- ming (controls by others)4 FAWS Field Adjustable Wattage Selector 4,5 SW Interface Module for SiteWise 4,5,6,8 LLC Integral wireless module 4,5,6,7 BL BL Bi-level func- tionality for motion sensor 4 DynaDimmer: Automatic Profile Dimming 4,5,7 CS50 Security 50% Dim- ming, 7 hours CM50 Median 50% Dimming, 8 hours CS30 Security 30% Dim- ming, 7 hours CM30 Median 30% Dimming, 8 hours MMRI High-Fre- quency motion sensor integral 7,9 PCB Photocon- trol Button 7,10,11 Fusing F1 Single (120, 277, 347VAC) 10 F2 Double (208, 240, 480VAC) 10 F3 Canadian Double Pull (208, 240, 480VAC) 10 Surge Protection (10kA is standard) SP2 Increased 20kA Textured BK Black WH White BZ Bronze DGY Dark Gray MGY Medium Gray Customer specified RAL Specify optional color or RAL (ex: RAL7024) CC Custom color (Must supply color chip for required factory quote) 1. 1150, 1675, and 2100mA not available with emergency battery backup (EBP). 2. 2100mA not available with emergency battery backup cold weather (EBPC). 3. Extended lead times apply. Contact factory for details. 4. Not available with other dimming control options. 5. Not available with motion sensor. 6. Not available with photocontrol. 7. Not available in 347 or 480V. 8. Available only in 120 or 277V. 9. MMRI not available with emergency battery backup cold weather (EBPC). 10. Must specify input voltage. 11. Not available with SiteWise (SW) and wireless control (LLC). 12. Not available with SiteWise (SW) or Dynadimmer (CS/CM). 13. Not available with SiteWise (SW), Wireless control (LLC), or DynaDimmer (CS/CM). 14. Not available in 2100mA. Gardco PureForm LED wall sconce comfort PWS offers a sleek, low profile design that will complement a range of architectural styles. Comfort optics are designed to enhance visual comfort by reducing glare. PureForm wall sconce provides up to 10,700 lumens to accommodate multiple mounting heights, and is available with Type 2, 3, 4, optical distributions. A full range of control options is available for additional energy savings. Optional emergency battery backup option is available for path-of-egress and is integral to the luminaire. Project: Location: Cat.No: Type: Lamps: Qty: Notes: Wall Mount PureForm LED wall sconce with comfort optics Index Page1/6Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: PWS-140L-450-WW-G2-4-UNV Notes: Type: SW3 PLS22-43342 PWS_PureForm_wall_sconce_comfort 05/20 page 2 of 6 Dimensions Luminaire Accessories (order separately) Mounting Accessories Wall Mount PWS-WS-G2 Wall Mounted Box for Surface Conduit Painted Black Wireless system remote controller accessory Wireless system offers a remote radio/sensor module that allows connection to a Limelight system (sold by others). Remote module can be mounted to wall or pole with j-box supplied. May be specified by choosing one of two different lenses to accommodate a variety of mounting heights/sensor detection ranges. Must specify option DD on luminaires that are planned to be used with remote mount controllers. Luminaire weights PureForm LED wall sconce PWS Weight Luminaire 20 lbs Luminaire - EBP (EM battery pack) 22 lbs Luminaire - EBPC (EM battery pack cold weather) 25 lbs System accessories Wireless system remote mount module LLCR2-(F) #2 lens - specify finish in place of (F) LLCR3-(F) #3 lens - specify finish in place of (F) Central Remote Motion Response (used connected to SiteWise main panel) MS2-A-FVR-3 MS2-A-FVR-7 15.66"(39.8 cm) 6.16"(15.6 cm) 15.58"(39.6 cm) PWS PureForm LED wall sconce wall mount - with Comfort Optics 3/4 - 14 NPSM CONDUIT TOP FEED 3/4 - 14 NPSM CONDUIT TOP FEED 3/4 - 14 NPSM CONDUIT BACKFEED 1/2 - 14 NPSM CONDUIT BACKFEED 2.25” (5.7cm) 4.00” (10.2cm)FOUR Ø0.38” (Ø0.95cm) HOLES FOR MOUNTING 3/4 - 14 NPSM CONDUIT TOP FEED 3/4 - 14 NPSM CONDUIT TOP FEED 3/4 - 14 NPSM CONDUIT BACKFEED 1/2 - 14 NPSM CONDUIT BACKFEED 2.25” (5.7cm) 4.00” (10.2cm)FOUR Ø0.38” (Ø0.95cm) HOLES FOR MOUNTING Index Page2/6Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: PWS-140L-450-WW-G2-4-UNV Notes: Type: SW3 PLS22-43342 PWS_PureForm_wall_sconce_comfort 05/20 page 3 of 6 LED Wattage and Lumen Values - 3000K Ordering Code LED Qty LED Current (mA) Color Temp. Average System Watts Type 2 Type 3 Type 4 Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) PWS-140L-450-WW-G2-x 140 450 3000 22 2364 B1-U0-G1 106 2429 B1-U0-G1 109 2579 B1-U0-G1 116 PWS-140L-650-WW-G2-x 140 650 3000 30 3295 B2-U0-G2 108 3387 B2-U0-G2 111 3596 B1-U0-G1 118 PWS-140L-1150-WW-G2-x 140 1150 3000 52 5696 B2-U0-G2 109 5855 B2-U0-G2 112 6215 B2-U0-G2 119 PWS-140L-1675-WW-G2-x 140 1675 3000 76 7907 B3-U0-G3 104 8129 B3-U0-G3 107 8628 B3-U0-G3 114 PWS-140L-2100-WW-G2-x 140 2100 3000 96 9467 B3-U0-G3 99 9732 B3-U0-G3 102 10330 B3-U0-G3 108 Values from photometric tests performed in accordance with IESNA LM-79 and are representative of the configurations shown. Actual performance may vary due to installation and environmental variables, LED and driver tolerances, and field measurement considerations. It is highly recommended to confirm performance with a photometric layout. NOTE: Some data may be scaled based on tests of similar (but not identical) luminaires. Contact factory for configurations not shown. PWS PureForm LED wall sconce wall mount - with Comfort Optics LED Wattage and Lumen Values - 4000K Ordering Code LED Qty LED Current (mA) Color Temp. Average System Watts Type 2 Type 3 Type 4 Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) PWS-140L-450-NW-G2-x 140 450 4000 22 2448 B1-U0-G1 110 2516 B1-U0-G1 113 2671 B1-U0-G1 120 PWS-140L-650-NW-G2-x 140 650 4000 30 3412 B2-U0-G2 112 3508 B2-U0-G2 115 3724 B1-U0-G1 123 PWS-140L-1150-NW-G2-x 140 1150 4000 52 5899 B2-U0-G2 113 6064 B2-U0-G2 116 6436 B2-U0-G2 123 PWS-140L-1675-NW-G2-x 140 1675 4000 76 8189 B3-U0-G3 108 8419 B3-U0-G3 111 8935 B3-U0-G3 118 PWS-140L-2100-NW-G2-x 140 2100 4000 96 9804 B3-U0-G3 102 10079 B3-U0-G3 105 10698 B3-U0-G3 112 Values from photometric tests performed in accordance with IESNA LM-79 and are representative of the configurations shown. Actual performance may vary due to installation and environmental variables, LED and driver tolerances, and field measurement considerations. It is highly recommended to confirm performance with a photometric layout. NOTE: Some data may be scaled based on tests of similar (but not identical) luminaires. Contact factory for configurations not shown. LED Wattage and Lumen Values - 5000K Ordering Code LED Qty LED Current (mA) Color Temp. Average System Watts Type 2 Type 3 Type 4 Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) PWS-140L-450-CW-G2-x 140 450 5000 22 2560 B1-U0-G1 115 2631 B1-U0-G1 118 2793 B1-U0-G1 125 PWS-140L-650-CW-G2-x 140 650 5000 30 3568 B2-U0-G2 117 3669 B2-U0-G2 121 3895 B2-U0-G2 128 PWS-140L-1150-CW-G2-x 140 1150 5000 52 6169 B2-U0-G2 118 6342 B3-U0-G3 121 6731 B2-U0-G2 129 PWS-140L-1675-CW-G2-x 140 1675 5000 76 8564 B3-U0-G3 113 8805 B3-U0-G3 116 9344 B3-U0-G3 123 PWS-140L-2100-CW-G2-x 140 2100 5000 96 10253 B3-U0-G3 107 10541 B3-U0-G3 110 11188 B3-U0-G3 117 Values from photometric tests performed in accordance with IESNA LM-79 and are representative of the configurations shown. Actual performance may vary due to installation and environmental variables, LED and driver tolerances, and field measurement considerations. It is highly recommended to confirm performance with a photometric layout. NOTE: Some data may be scaled based on tests of similar (but not identical) luminaires. Contact factory for configurations not shown. Index Page3/6Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: PWS-140L-450-WW-G2-4-UNV Notes: Type: SW3 PLS22-43342 PWS_PureForm_wall_sconce_comfort 05/20 page 4 of 6 Optical Distributions LED Wattage and Lumen Values (Emergency Mode)Lumen Outputs Ordering Code LED Qty LED Current (mA) Color Temp. Temp. Range (°C) Avg. System Watts Type 2 Type 3 Type 4 Normal Mode Emergen- cy Mode Normal Mode Emergen- cy Mode Normal Mode Emergen- cy Mode Normal Mode Emergen- cy Mode PWS-140L-450-NW-G2-x-EBP-UNV 140 450 4000 0 to 40 22 10 2448 1376 2516 1415 2671 1502 PWS-140L-650-NW-G2-x-EBP-UNV 140 650 4000 0 to 40 30 10 3412 1376 3508 1415 3724 1502 PWS-140L-450-NW-G2-x-EBPC-UNV 140 450 4000 -20 to 40 22 18 2448 1964 2516 2019 2671 2143 PWS-140L-650-NW-G2-x-EBPC-UNV 140 650 4000 -20 to 40 30 18 3412 1964 3508 2019 3724 2143 PWS-140L-1150-NW-G2-x-EBPC-UNV 140 1150 4000 -20 to 40 52 18 5899 1964 6064 2019 6436 2143 PWS-140L-1675-NW-G2-x-EBPC-UNV 140 1675 4000 -20 to 40 75 18 8189 1964 8419 2019 8935 2143 Based on 20' mounting height Comfort Type 2 Comfort Type 4Comfort Type 3 0.2 fc 0.5 fc 1 fc 2 fc 1 MH2 MH3 MH 1 MH 2 MH 3 MH 4 MH4 MH 1 MH 2 MH 3 MH 1 MH 2 MH 3 MH 0.2 fc 0.5 fc 1 fc 2 fc 1 MH2 MH3 MH 1 MH 2 MH 3 MH 4 MH4 MH 1 MH 2 MH 3 MH 4 MH 1 MH2 MH3 MH 1 MH 2 MH 3 MH 4 MH 0.2 fc 0.5 fc 1 fc 2 fc1 fc Predicted Lumen Depreciation Data Predicted performance derived from LED manufacturer’s data and engineering design estimates, based on IESNA LM-80 methodology. Actual experience may vary due to field application conditions.L70 is the predicted time when LED performance depreciates to 70% of initial lumen output. Calculated per IESNA TM21-11. Published L70 hours limited to 6 times actual LED test hours Ambient Temperature °C Drive current Calculated L70 Hours L70 per TM-21 Lumen Maintenance % at 60,000 hrs 25°C up to 2100 mA >100,000 hours >42,000 hours >88% For emergency EBPC option, publish values are based on initial lumens. PWS PureForm LED wall sconce wall mount - with Comfort Optics Index Page4/6Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: PWS-140L-450-WW-G2-4-UNV Notes: Type: SW3 PLS22-43342 PWS_PureForm_wall_sconce_comfort 05/20 page 5 of 6 Specifications Housing Main body housing and door frame made of low copper die cast aluminum alloy for a high resistance to corrosion. Door hinges secured by aircraft cable to allow access to driver or other electronic components for servicing. The door frame acts as the main heat transfer component and it is optimized to allowing the main housing to have no fins, giving the freedom to have a clean minimalist aesthetic design while allowing it to house emergency battery backup equipment and various other options. Luminaire housing rated to IP65, tested in accordance to Section 9 of IEC 60598-1. Light engine Light guide technology provides low-glare, uniform illumination. Composed of 140 LEDs strategically positioned on the edge of the optical plate. Light engine luminous opening size optimized to best achieve a balance between lumen output and optical performance with the need to provide visual comfort. Light engine frame ensures contact with housing to provide heat conduction and sealing against the elements. Light engine is RoHS compliant. Standard color temperatures: 3000K +/- 130K, 4000K+/- 130K, 5000K +/- 225K. Minimum CRI of 70. Also available in 2700K and Amber (>590nm) with extended lead times. Contact factory for details. LED light engine is rated IP65 in accordance to Section 9 of IEC 60598-1. Energy saving benefits System efficacy up to 122 lms/W with significant energy savings over Pulse Start Metal Halide luminaires. Optional control options provide added energy savings during unoccupied periods. Optical systems The advanced LED comfort optical system provides Types 2, 3, and 4. Composed of high performance UV-stabilized optical grade lens with molded micro-optics to achieve desired distribution optimized to get a exceptional lighting uniformity. Performance tested per LM-79 and TM-15 (IESNA) certifying its photometric performance. Luminaire designed with 0% uplight (U0 per IESNA TM-15). Mounting Mounting is completed through integral back plate that features a separate recessed feature for hook and lock quick mount plate that secures with two set screws from bottom of luminaire. Luminaire ships fully assembled, ready to install. Control options 0-10V dimming (DD): Access to 0-10V dimming leads supplied through back of luminaire (for secondary dimming controls by others). Cannot be used with other control options. Field Adjustable Wattage Selector (FAWS): Luminaire equipped with the ability to manually adjust the wattage in the field to reduce total luminaire lumen output and light levels. Comes pre-set to the highest position at the lumen output selected. Use chart below to estimate reduction in lumen output desired. Cannot be used with other control options or motion response. SiteWise (SW): SiteWise system includes a controller fully integrated in the luminaire that enables the luminaires to communicate with a dimming signal transmitter cabinet located on site using patented central dimming technology. A locally accessible mobile app allows users to access the system and set functionalities such as ON/OFF, dimming levels and scheduling. Cannot be used with other control options, motion response or photocell options. Additional functionalities are available such as communication with indoor lighting and connection to BMS systems. Complete information on the control system can be found on the SiteWise website at signify.com/sitewise. Automatic Profile Dimming (CS/CM): Standard dimming profiles provide flexibility towards energy savings goals while optimizing light levels during specific dark hours. Dimming profiles include two dimming settings including dim to 30% or 50% of the total lumen output. Automatic dimming profile scheduled with the following settings: • CS50/CS30: Security for 7 hours night duration (Ex., 11 PM - 6 AM) • CM50/CM30: Median for 8 hours night duration (Ex., 10 PM - 6 AM) All above profiles are calculated from mid point of the night. Dimming is set for 6 hours after the mid point and 2, or 3 hours before depending of the duration of dimming. Cannot be used with other dimming control options. Emergency Battery Backup Cold Pack (EBP/EBPC): Emergency battery packs included integral to the luminaire, allowing for a consistent look between emergency and non-emergency luminaires. A separate surface mount accessory box is not required. EBP is suitable for use in ambient temperature conditions from 0°C (32°F) to 40°C (100°F) available on 450mA and 650mA only. EBPC cold weather rated down to -20°C (-4°F) available on all wattage except the 2100mA configuration. Both systems are designed to have a secondary driver with relay to immediately detect AC power loss to power luminaire for a minimum of 90 minutes from the time power is lost. Available with 120-277V, or 'UNV' only. Wireless system (LLC): Optional wireless controller integral to luminaire ready to be connected to a Limelight system (sold by others). The system allows you to wirelessly manage the entire site, independent lighting groups or individual luminaires while on-site or remotely. Based on a high-density mesh network with an easy to use web-based portal, you can conveniently access, monitor and manage your lighting network remotely. Wireless controls can be combined with site and area, pedestrian, and parking garage luminaires as well, for a completely connected outdoor solution. Motion response capability can be installed in other luminaires in the mesh or on a remote pod accessory where pod is mounted to pole or wall. Motion response options Bi-Level Infrared Motion Response (BL-MMRI): High frequency (5.8GHz +/- 75MHz microwave ISM wave band with <0.5 mW transmitting power) motion sensor is mounted integral to the luminaire. This bi-level motion sensor is designed to detect motion through the light engine so it can be used inside the luminaire without any protruded components. Sensor allows energy savings and meeting code requirements without compromising comfort and aesthetics. The product comes with factory pre-programmed standard settings including a dimming level of 30%, hold time of 3 minutes with no stand-by period. This means that in operations, the sensor will keep the luminaire at 30% of total lumen output and when motion is detected, the luminaire returns to 100% output. It will remain on full power for 3 minutes default prior to dimming back to low when no motion is observed. Other dimming levels, holding times, and stand-by periods are possible. Please contact factory technical support for details. FAWS Position Percent of Typical Lumen Output 1 25% 2 50% 3 55% 4 65% 5 75% 6 80% 7 85% 8 90% 9 95% 10 100% Note: Typical value accuracy +/- 5% 6' 6' 6'6'12'18'12'12'18'18' 12' 18' 24'24' 24' 15 ft [4.6 m] Recommended max. mtg height Strong detection range Limiteddetection range Limited detection range Strong detection range PWS PureForm LED wall sconce wall mount - with Comfort Optics Index Page5/6Submitted On: Aug 31, 2022 Submitted by Professional Lighting Services Job Name: Old Meridian ARCHITECT: RQAW Catalog Number: PWS-140L-450-WW-G2-4-UNV Notes: Type: SW3 PLS22-43342 Electrical Driver: Driver efficiency (>90% standard). 120-480V available (restrictions apply). Open/short circuit protection. Optional 0-10V dimming to 10% power. RoHS compliant. Button Photocontrol (PCB): Button style design for internal luminaires mounting applications. The photocontrol is constructed of a high impact UV stabilized polycarbonate housing. Rated voltage of 120V or 208-277V with a load rating of 1000 VA. The photocell will turn on with 1-4Fc of ambient light. Surge protection (SP1/SP2): Each luminaire is provided as standard with surge protector tested in accordance with ANSI/IEEE C62.45 per ANSI/ IEEE C62.41.2 Scenario I Category C High Exposure 10kV/5kA waveforms for Line Ground, Line Neutral and Neutral Ground, and in accordance with U.S. DOE (Department of Energy) MSSLC (Municipal Solid-State Street Lighting Consortium) Model Specification for LED Roadway Luminaires Appendix D Electrical Immunity High Test Level 10kV / 5kA. Optional 20kV is available for additional protection. Listings UL/cUL listed to the UL 1598 standard, suitable for wet locations when mounted downward facing. Also listed for damp locations when inverted upward facing when mounted in covered ceiling application. Suitable for use in ambient temperatures from -40° to 40°C (-40° to 104°F). Most PureForm PWS configurations are qualified under Standard DesignLights Consortium® category. Consult DLC Qualified Products list for more details. CCTs 3000K and warmer are IDA Dark Sky Approved. Finish Each standard color luminaire receives a fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) textured polyester powdercoat finish. The surface treatment achieves a minimum of 1000 hours for salt spray resistant finish in accordance with testing performed and per ASTM B117 standard. Standard colors include bronze (BZ), black (BK), white (WH), dark gray (DGY), and medium gray (MGY). Consult factory for specs on optional or custom colors. Warranty PureForm luminaires feature a 5-year limited warranty. See signify.com/warranties for complete details and exclusions. Specifications (cont'd) PWS PureForm LED wall sconce wall mount - with Comfort Optics © 2020 Signify Holding. All rights reserved. The information provided herein is subject to change, without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. PWS_PureForm_wall_sconce_comfort 05/20 page 6 of 6 Signify North America Corporation 200 Franklin Square Drive, Somerset, NJ 08873 Telephone 855-486-2216 Signify Canada Ltd. 281 Hillmount Road, Markham, ON, Canada L6C 2S3 Telephone 800-668-9008 All trademarks are owned by Signify Holding or their respective owners. www.gardcolighting.com Index Page6/6Submitted On: Aug 31, 2022