The URL can be used to link to this page

Home My WebLink AboutLighting Cut SheetsDate: Nov 15, 2022 Page 1/1 Transmittal ESL-Spectrum 1591 N Harding Street Indianapolis IN 46202 Phone: (317) 951-2300 From: Zach Newcomb FF00009 Page 1/1 Project Project Bridge Quote#INDY22-104626 Location Carmel IN Contact: ATTACHED WE ARE SENDING YOU 1 COPY OF THE FOLLOWING ITEM: Drawings Specifications Other: Prints Information Plans Submittals THESE ARE TRANSMITTED FOR: Prior Approval Resubmittal for Approval Record X Approval Corrections Bids due on: Approval as Submitted Your Use Other: Approval as Noted Review and Comment Type MFG Part EXTERIOR OPTION 2 S2 Beacon Products VP-2-320L-185-4K7-2-UNV-A3-*** RSSB25-50B-1-B3-*** S3-BL Beacon Products VP-2-320L-170-4K7-3-UNV-A3-***-BC RSSB25-50B-1-B3-*** S4 Beacon Products VP-2-320L-185-4K7-4F-UNV-A3-***- RSSB25-50B-1-B3-*** S4-BL Beacon Products VP-2-320L-185-4K7-4W-UNV-A3-***- BC RSSB25-50B-1-B3-*** S5 Beacon Products (2) VP-2-320L-185-4K7-5QW-UNV-A3- *** (1) RSSB25-50B-1-B3-*** WP1 Kim Lighting, Inc.WDM/D/48L-85/4K7/4F/UNV/*** WP2 Kim Lighting, Inc.WDM/D/48L-65/4K7/3/UNV/*** WP3 Kim Lighting, Inc.WDS/D/24L-30/4K7/3/UNV/*** Date: Nov 15, 2022 Job Name: Project Bridge EXTERIOR OPTION 2 Bid Date: Nov 14, 2022 Submittal Date: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-2-UNV-A3-*** RSSB25-50B-1-B3-*** Notes: Type: S2 INDY22-104626 Page 1/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: KEY DATA Lumen Range 5,000–80,000 Wattage Range 36–600 Efficacy Range (LPW)92–155 Weight lbs. (kg)13.7-30.9 (6.2-13.9) CATALOG #: FEATURES • Low profile LED area/site luminaire with a variety of IES distributions for lighting applications such as auto dealership, retail, commercial, and campus parking lots • Featuring two different optical technologies, Strike and Micro Strike Optics, which provide the best distribution patterns for retrofit or new construction • Rated for high vibration applications including bridges and overpasses. All sizes are rated for 1.5G • Control options including photo control, occupancy sensing, NX Distributed Intelligence™, wiSCAPE and 7-Pin with networked controls • New customizable lumen output feature allows for the wattage and lumen output to be customized in the factory to meet whatever specification requirements may entail • Field interchangeable mounting provides additional flexibility after the fixture has shipped CONTROL TECHNOLOGY ™ See Certiﬁcation Speciﬁcations BUY AMERICANSOLUTIONS See Certiﬁcation Speciﬁcations BUY AMERICANSOLUTIONSIP65 VIPER Area/Site VIPER LUMINAIRE CONSTRUCTION • Die-cast housing with hidden vertical heat fins are optimal for heat dissipation while keeping a clean smooth outer surface • Corrosion resistant, die-cast aluminum housing with 1000 hour powder coat paint finish • External hardware is corrosion resistant OPTICS • Micro Strike Optics (160, 320, 480, or 720 LED counts) maximize uniformity in applications and come standard with mid- power LEDs which evenly illuminate the entire luminous surface area to provide a low glare appearance. Catalog logic found on page 2 • Strike Optics (36, 72, 108, or 162 LED counts) provide best in class distributions and maximum pole spacing in new applications with high powered LEDs. Strike optics are held in place with a polycarbonate bezel to mimic the appearance of the Micro Strike Optics so both solutions can be combined on the same application. Catalog logic found on page 3 • Both optics maximize target zone illumination with minimal losses at the house-side, reducing light trespass issues. Additional backlight control shields and house side shields can be added for further reduction of illumination behind the pole • One-piece silicone gasket ensures a weatherproof seal • Zero up-light at 0 degrees of tilt • Field rotatable optics INSTALLATION • Mounting patterns for each arm can be found on page 11 • Optional universal mounting block for ease of installation during retrofit applications. Available as an option (ASQU) or accessory for square and round poles. • All mounting hardware included CONTROLS (CONTINUED) • NX Distributed Intelligence™ available with in fixture wireless control module, features dimming and occupancy sensor • wiSCAPE® available with in fixture wireless control module, features dimming and occupancy sensor. Also available in 7-pin configuration CERTIFICATIONS• Meets the qualifications for DLC Premium • Listed to UL1598 and CSA C22.2#250.0-24 for wet locations and 40˚C ambient temperatures • 1.5 G rated for ANSI C136.31 high vibration applications • Fixture is IP65 rated • Meets IDA recommendations using 3K CCT configuration at 0 degrees of tilt • This product qualifies as a “designated country construction material” per FAR 52.225-11 Buy American-Construction Materials under Trade Agreements effective 04/23/2020. See Buy American Solutions. WARRANTY• 5 year warranty • See HLI Commercial and Industrial Outdoor Lighting Warranty for additional information SPECIFICATIONS INSTALLATION (CONTINUED) • Knuckle arm fitter option available for 2-3/8” OD tenon • For products with EPA less than 1 mounted to a pole greater that 20ft, a vibration damper is recommended ELECTRICAL • Universal 120-277 VAC or 347-480 VAC input voltage, 50/60 Hz • Ambient operating temperature -40˚C to 40˚C • Drivers have greater than 90% power factor and less than 20% THD • LED drivers have output power over-voltage, over-current protection and short circuit protection with auto recovery • Field replaceable surge protection device provides 20kA protection meeting ANSI/ IEEE C62.41.2 Category C High and Surge Location Category C3; Automatically takes fixture off-line for protection when device is compromised CONTROLS • Photo control, occupancy sensor programmable controls, and Zigbee wireless controls available for complete on/off and dimming control • Please consult brand or sales representative when combining control and electrical options as some combinations may not operate as anticipated depending on your application • 7-pin ANSI C136.41-2013 photocontrol receptacle option available for twist lock photocontrols or wireless control modules (control accessories sold separately) • 0- 10V Dimming Drivers are standard and dimming leads are extended out of the luminaire unless control options require connection to the dimming leads. Must specify if wiring leads are to be greater than the 6” standard OPTICS Index Page1/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-2-UNV-A3-*** RSSB25-50B-1-B3-*** Notes: Type: S2 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 2/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com MICROSTRIKE OPTICS – ORDERING GUIDE CATALOG # DATE:LOCATION: TYPE:PROJECT: CATALOG #: VP –––––––– Series Optic Platform Size Light Engine CCT/CRI Distribution Optic Rotation Voltage VP Viper Micro Strike 1 Size 1 2 Size 2 3 Size 3 4 Size 4 160L-35 6 5500 lumens 160L-50 6 7500 lumens 160L-75 10000 lumens 160L-100 12500 lumens 160L-115 15000 lumens 160L-135 18000 lumens 160L-160 21000 lumens 320L-145 21000 lumens 320L-170 24000 lumens 320L-185 27000 lumens 320L-210 30000 lumens 320L-235 33000 lumens 320L-255 36000 lumens 320L-315 6 40000 lumens 480L-285 40000 lumens 480L-320 44000 lumens 480L-340 48000 lumens 480L-390 52000 lumens 480L-425 55000 lumens 480L-470 60000 lumens 720L-435 60000 lumens 720L-475 65000 lumens 720L-515 70000 lumens 720L-565 6 75000 lumens 720L-600 6 80000 lumens CLO Custom Lumen Output 1 AP AP-Amber Phosphor Converted 27K8 2700K, 80 CRI 3K7 3000K, 70 CRI 3K8 3000K, 80 CRI 35K8 3500K, 80 CRI 3K9 3000K, 90 CRI 4K7 4000K, 70 CRI 4K8 4000K, 80 CRI 4K9 4000K, 90 CRI 5K7 5000K, 70 CRI 5K8 5000K, 80 CRI 2 Type 2 3 Type 3 4F Type 4 Forward 4W Type 4 Wide 5QM Type 5 Square Medium 5QW Type 5 Square Wide L Optic rotation left R Optic rotation right UNV 120- 277V 120 120V 208 208V 240 240V 277 277V 347 347V 480 480V ––– Mounting Color Options Network Control Options A Arm mount for square pole/flat surface A_Arm mount for round pole 2 ASQU Universal arm mount for square pole A_U Universal arm mount for round pole 2 AAU Adjustable arm for pole mounting (universal drill pattern) AA_U Adjustable arm mount for round pole 2 ADU Decorative upswept Arm (universal drill pattern) AD_U Decorative upswept arm mount for round pole 2 MAF Mast arm fitter for 2-3/8" OD horizontal arm K Knuckle T Trunnion WB Wall Bracket, horizontal tenon with MAF WM Wall mount bracket with decorative upswept arm WA Wall mount bracket with adjustable arm BLT Black Matte Textured BLS Black Gloss Smooth DBT Dark Bronze Matte Textured DBS Dark Bronze Gloss Smooth GTT Graphite Matte Textured LGS Light Grey Gloss Smooth LGT Light Grey Gloss Textured PSS Platinum Silver Smooth WHT White Matte Textured WHS White Gloss Smooth VGT Verde Green Textured Color Option CC Custom Color F Fusing 2PF Dual Power Feed 2DR Dual Driver TE Tooless Entry BC Backlight Control TB Terminal Block NXSPW-14F NX Wireless, PIR Occupancy Sensor, Dimming Daylight Harvesting, 14' 1,3,4 NXSPW-40F NX Wireless, PIR Occupancy Sensor, Dimming Daylight Harvesting, 40' 1,3,4 NXSP-14F NX, PIR Occupancy Sensor, Dimming Daylight Harvesting, 14' 3,4 NXSP-40F NX, PIR Occupancy Sensor, Dimming Daylight Harvesting, 40' 3,4 NXWE NX Wireless Enabled (module + radio) 3,4 WIR wiSCAPE® In-Fixture Module 3,4 WIRSC wiSCAPE® Module and Occupancy Sensor 3,4 Stand Alone Sensors BTS-14F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor 4 BTS-40F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor 4 BTSO-12F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor, up to 12' mounting height 4 7PR 7-Pin Receptacle 4 7PR-SC 7-Pin Receptacle with shorting cap 4 3PR 3-Pin twist lock 4 3PR-SC 3-Pin receptacle with shorting cap 4 3PR-TL 3-Pin PCR with photocontrol 4 Programmed Controls ADD AutoDim Timer Based Dimming 4 ADT AutoDim Time of Day Dimming 4 Photocontrols PC Button Photocontrol 4,7 1 – Items with a grey background can be done as a custom order. Contact brand representative for more information 2 – Replace “_” with “2” for 2.5”-3.4” OD pole, “3” for 3.5”-4.13” OD pole, “4” for 4.18”-5.25” OD pole, “5” for 5.5”-6.5” OD pole 3 – Networked Controls cannot be combined with other control options 4 – Not available with 2PF option 5 – Not available with Dual Driver option 6 – Some voltage restrictions may apply when combined with controls 7 – Not available with 480V Example: VP–2–320L-145–3K7–2–R–UNV–A3–BLT Index Page2/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-2-UNV-A3-*** RSSB25-50B-1-B3-*** Notes: Type: S2 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 4/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: Hubbell Control Solutions — Accessories (Sold Separately) NX Distributed Intelligence™ NXOFM- 1R1D-UNV On-fixture Module (7-pin), On / Off / Dim, Daylight Sensor with HubbNET Radio and Bluetooth® Radio, 120–480VAC wiSCAPE® Lighting Control WIR-RME-L On-fixture Module (7-pin or 5-pin), On / Off / Dim, Daylight Sensor with wiSCAPE Radio, 110–480VAC SCP-REMOTE Remote Control for SCP/_F option. Order at least one per project to program and control the occupancy sensor For additional information related to these accessories please visit www.hubbellcontrolsolutions.com. Options provided for use with integrated sensor, please view specification sheet ordering information table for details. ORDERING GUIDE (CONTINUED) CATALOG # –– Accessory Type Size Option SHD Shield MTG Mounting 1 Size 1 2 Size 2 3 Size 3 4 Size 4 HSS-90-B House Side Shield 90º Back HSS-90-F House Side Shield 90º Front HSS-90-S House Side Shield 90º Side HSS-270-BSS House Side Shield 270º Back/Side/Side HSS-270-FSS House Side Shield 270º Front/Side/Side HSS-270-FSB House Side Shield 270º Front/Side/Back HSS-360 House Side Shield 360º BC Back Light Control A Arm Mount for square pole/flat surface ASQU Universal Arm Mount for square pole AAU Adjustable Arm for pole mounting ADU Decorative upswept Arm RPA Round Pole Adapter MAF Mast Arm Fitter for 2-3/8" OD horizontal arm K Knuckle T Trunnion WB Wall Bracket (compatible with universal arm mounts) – Color BLS Black Gloss Smooth BLT Black Matte Textured DBS Dark Bronze Gloss Smooth DBT Dark Bronze Matte Textured GTT Graphite Matte Textured LGS Light Gray Gloss Smooth PSS Platinum Silver Smooth WHS White Gloss Smooth WHT White Matte Textured VGT Green Landscape Decorative LEG Legacy Colors Color Option CC Custom Color CONTROLS ™ Control Option Sensor Networkable Scheduling Occupancy Daylight Harvesting On/Off Control Programming Pair with Sensor Sensor Mounting Height NXWE –✔✔––✔✔–– NXSPW_F NXSM-P ✔✔✔✔✔✔–14ft, 40ft NXSP_F NXSM-P ––✔✔✔––14ft, 40ft BTSO12F BTSMP-OMNI ––✔✔✔Bluetooth –12ft BTS_F BTSMP ––✔✔–––14ft, 40ft ADD ––✔––✔–✔– ADT ––✔––✔–✔– 7PR –Paired with external control Paired with external control –Paired with external control Paired with external control –✔– 7PR-SC –––––––✔– 3PR –––––Paired with external control –✔– 3PR-SC –––––––✔– 3PR-TL ––––✔✔–✔– WIR –✔✔–✔✔Gateway –– WIRSC BTSMP ✔✔✔✔✔Gateway –14ft, 40ft – Accessory Type Option MSC Miscellaneous BIRD SPK Bird Spike Index Page3/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-2-UNV-A3-*** RSSB25-50B-1-B3-*** Notes: Type: S2 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 5/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DELIVERED LUMENS DATE:LOCATION: TYPE:PROJECT: CATALOG #: PROJECTED LUMEN MAINTENANCE Ambient Temp.0 25,000 *TM-21-11 36,000 50,000 100,000 Calculated L70 (Hours) 25°C / 77°F 1.00 0.97 0.96 0.95 0.91 408,000 40°C / 104°F 0.99 0.96 0.95 0.94 0.89 356,000 LUMINAIRE AMBIENT TEMPERATURE FACTOR (LATF) Ambient Temperature Lumen Multiplier 0°C 32°F 1.03 10°C 50°F 1.01 20°C 68°F 1.00 25°C 77°F 1.00 30°C 86°F 0.99 40°C 104°F 0.98 50°C 122°F 0.97 For delivered lumens, please see Lumens Data PDF on www.hubbelllighting.com Micro Strike Lumen Multiplier CCT 70 CRI 80 CRI 90 CRI 2700K –0.841 – 3000K 0.977 0.861 0.647 3500K –0.900 – 4000K 1 0.926 0.699 5000K 1 0.937 0.791 Monochromatic Amber Multiplier Amber 0.250 Strike Lumen Multiplier CCT 70 CRI 80 CRI 90 CRI 2700K –0.859 – 3000K 0.941 0.912 0.703 3500K –0.906 – 4000K 1 0.894 0.734 5000K 1 0.879 0.711 Monochromatic Amber Multiplier Amber 0.255 Index Page4/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-2-UNV-A3-*** RSSB25-50B-1-B3-*** Notes: Type: S2 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 6/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com ELECTRICAL DATA: MICRO STRIKE DATE:LOCATION: TYPE:PROJECT: CATALOG #: # OF LEDS 160 NOMINAL WATTAGE 35 50 75 100 115 135 160 SYSTEM POWER (W)34.9 50.5 72.1 97.2 111.9 132.2 157.8 INPUT VOLTAGE (V)CURRENT (Amps) 120 0.29 0.42 0.63 0.83 0.96 1.13 1.33 208 0.17 0.24 0.36 0.48 0.55 0.65 0.77 240 0.15 0.21 0.31 0.42 0.48 0.56 0.67 277 0.13 0.18 0.27 0.36 0.42 0.49 0.58 347 0.10 0.14 0.22 0.29 0.33 0.39 0.46 480 0.07 0.10 0.16 0.21 0.24 0.28 0.33 # OF LEDS 320 NOMINAL WATTAGE 145 170 185 210 235 255 315 SYSTEM POWER (W)150 166.8 185.7 216.2 240.9 261.5 312 INPUT VOLTAGE (V)CURRENT (Amps) 120 1.21 1.42 1.54 1.75 1.96 2.13 2.63 208 0.70 0.82 0.89 1.01 1.13 1.23 1.51 240 0.60 0.71 0.77 0.88 0.98 1.06 1.31 277 0.52 0.61 0.67 0.76 0.85 0.92 1.14 347 0.42 0.49 0.53 0.61 0.68 0.73 0.91 480 0.30 0.35 0.39 0.44 0.49 0.53 0.66 # OF LEDS 480 NOMINAL WATTAGE 285 320 340 390 425 470 SYSTEM POWER (W)286.2 316.7 338.4 392.2 423.2 468 INPUT VOLTAGE (V)CURRENT (Amps) 120 2.38 2.67 2.83 3.25 3.54 3.92 208 1.37 1.54 1.63 1.88 2.04 2.26 240 1.19 1.33 1.42 1.63 1.77 1.96 277 1.03 1.16 1.23 1.41 1.53 1.70 347 0.82 0.92 0.98 1.12 1.22 1.35 480 0.59 0.67 0.71 0.81 0.89 0.98 # OF LEDS 720 NOMINAL WATTAGE 435 475 515 565 600 SYSTEM POWER (W)429.3 475 519.1 565.2 599.9 INPUT VOLTAGE (V)CURRENT (Amps) 120 3.63 3.96 4.29 4.71 5.00 208 2.09 2.28 2.48 2.72 2.88 240 1.81 1.98 2.15 2.35 2.50 277 1.57 1.71 1.86 2.04 2.17 347 1.25 1.37 1.48 1.63 1.73 480 0.91 0.99 1.07 1.18 1.25 Index Page5/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-2-UNV-A3-*** RSSB25-50B-1-B3-*** Notes: Type: S2 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 7/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: ELECTRICAL DATA: STRIKE CATALOG #: # OF LEDS 36 NOMINAL WATTAGE 39 55 85 105 115 SYSTEM POWER (W)39.6 56.8 83.6 108.2 113.7 INPUT VOLTAGE (V)CURRENT (Amps) 120 0.33 0.46 0.71 0.88 1.00 208 0.19 0.26 0.41 0.50 0.58 240 0.16 0.23 0.35 0.44 0.50 277 0.14 0.20 0.31 0.38 0.43 347 0.11 0.16 0.24 0.30 0.35 480 0.08 0.11 0.18 0.22 0.25 # OF LEDS 72 NOMINAL WATTAGE 120 145 180 210 215 SYSTEM POWER (W)120.9 143.2 179.4 210.2 214.8 INPUT VOLTAGE (V)CURRENT (Amps) 120 0.96 1.21 1.50 1.75 2.00 208 0.55 0.70 0.87 1.01 1.15 240 0.48 0.60 0.75 0.88 1.00 277 0.42 0.52 0.65 0.76 0.87 347 0.33 0.42 0.52 0.61 0.69 480 0.24 0.30 0.38 0.44 0.50 # OF LEDS 108 NOMINAL WATTAGE 240 250 280 320 325 SYSTEM POWER (W)241.7 250.8 278.3 322.1 324.7 INPUT VOLTAGE (V)CURRENT (Amps) 120 1.79 2.08 2.33 2.71 3.04 208 1.03 1.20 1.35 1.56 1.75 240 0.90 1.04 1.17 1.35 1.52 277 0.78 0.90 1.01 1.17 1.32 347 0.62 0.72 0.81 0.94 1.05 480 0.45 0.52 0.58 0.68 0.76 # OF LEDS 162 NOMINAL WATTAGE 365 405 445 485 545 SYSTEM POWER (W)362.6 403.6 445.1 487.1 543.9 INPUT VOLTAGE (V)CURRENT (Amps) 120 2.67 3.38 3.71 4.04 4.54 208 1.54 1.95 2.14 2.33 2.62 240 1.33 1.69 1.85 2.02 2.27 277 1.16 1.46 1.61 1.75 1.97 347 0.92 1.17 1.28 1.40 1.57 480 0.67 0.84 0.93 1.01 1.14 Index Page6/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-2-UNV-A3-*** RSSB25-50B-1-B3-*** Notes: Type: S2 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 8/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: MICRO STRIKE PHOTOMETRY The following diagrams represent the general distribution options offered for this product. For detailed information on specific product configurations, see website photometric test reports. Type 2Type 2 Type 4F Type 4WType 4 Wide Type 5QMType 4F Type 5QMType 5QM Type 5QW Type 3Type 3 Index Page7/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-2-UNV-A3-*** RSSB25-50B-1-B3-*** Notes: Type: S2 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 9/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: OPTIC STRIKE PHOTOMETRY The following diagrams represent the general distribution options offered for this product. For detailed information on specific product configurations, see website photometric test reports. Type FR - Front Row/Auto OpticType FR – Front Row/Auto Optic Type 4Type 4 Forward Type 2Type 2 Type 4 WideType 4 Wide Type 5R (rectangular)Type 5R (rectangular) Type CornerType Corner Type 3Type 3 Type 5QMType 5QM Type 5W (round wide)Type 5W (round wide)Type TC (tennis court)Type TC Index Page8/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-2-UNV-A3-*** RSSB25-50B-1-B3-*** Notes: Type: S2 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 10/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: DIMENSIONS EPA VP1 (Size 1)VP2 (Size 2)VP3 (Size 3)VP4 (Size 4)Config. Single Fixture 0.454 0.555 0.655 0.698 Two at 180 0.908 1.110 1.310 1.396 Two at 90 0.583 0.711 0.857 0.948 Three at 90 1.037 1.266 1.512 1.646 Three at 120 0.943 1.155 1.392 1.680 Four at 90 1.166 1.422 1.714 1.896 Weight lbs kgs VP1 (Size 1)13.7 6.2 VP2 (Size 2)16.0 7.26 VP3 (Size 3)25.9 11.7 VP4 (Size 4)30.8 13.9 XX XX/XX/XX ECO-XXXX XXX XXX 12765432 D C B A 1276543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 11 SHTS Error: No reference Error: No reference * * * VP1-ASQ.dftjdietrich09/24/21 XXX 05/19/05 XXX 05/19/05 PV:1 14.373 5.000 16.756 21.756 3.477 SIZE 1 SIZE 3 SIZE 2 SIZE 4 5.00 16.76 14.37 21.76 3.48 XX XX/XX/XX ECO-XXXX XXX D C B A 128765432 12876543 This document contains confidential and proprietary information Lighting. Receipt or possession of this document does not conv rights to reproduce or disclose its contents, or to make, use , or anything it may disclose. Reproduction, disclosure, or use of the or its contents, without the specific written authorization of Hubb Lighting, may violate the intellectual property rights of Hubbell L UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. DESNRECORDDATEREV SHT 12 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 5.000 21.877 14.373 26.876 3.477 5.00 21.88 14.37 26.88 3.48 XX XX/XX/XX ECO-XXXX XXX XXX 12765432 D C B A 1276543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 11 SHTS Error: No reference Error: No reference * * * VP3-ASQ.dftjdietrich09/24/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.500 16.113 34.476 3.477 26.976 XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 11 SHTS Error: No reference Error: No reference * * * VP4-ASQ.dftjdietrich09/24/21 XXX 05/19/05 XXX 05/19/05 PV:1 19.622 7.500 27.980 35.476 3.477 7.50 7.50 3.48 3.48 26.97 34.47 27.98 19.62 35.48 Index Page9/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-2-UNV-A3-*** RSSB25-50B-1-B3-*** Notes: Type: S2 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 11/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: MOUNTING ASQ–STRAIGHT ARM MOUNT Fixture ships with integral arm for ease of installation. Compatible with Hubbell Outdoor B3 drill pattern. For round poles add applicable suffix (2/3/4/5) ASQU–UNIVERSAL ARM MOUNT Universal mounting block for ease of installation. Compatible with drill patterns from 2.5" to 4.5" and Hubbell drill pattern S2. For round poles add applicable suffix (2/3/4/5) AAU–ADJUSTABLE ARM FOR POLE MOUNTING Rotatable arm mounts directly to pole. Compatible with drill patterns from 2.5" to 4.5" and Hubbell drill pattern S2. For round poles add applicable suffix (2/3/4/5). Rotatable in 15˚ aiming angle increments. Micro Strike configurations have a 45° aiming limitation. Strike configurations have a 30° aiming limitation. ADU–DECORATIVE UPSWEPT ARM Upswept Arm compatible with drill patterns from 2.5" to 4.5". For round poles add applicable suffix (2/3/4/5). MAF–MAST ARM FITTER Fits 2-3/8" OD horizontal tenons. K–KNUCKLE Knuckle mount 15˚ aiming angle increments for precise aiming and control, fits 2-3/8" tenons or pipes. Micro Strike configurations have a 45° aiming limitation. Strike configurations have a 30° aiming limitation. T–TRUNNION Trunnion for surface and crossarm mounting using (1) 3/4" or (2) 1/2" size through bolts. Micro Strike configurations have a 45° aiming limitation. Strike configurations have a 30° aiming limitation. XX XX/XX/XX ECO-XXXX XXX XXX 12765432 D C B A 1276543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 D C B A 8 7 6 5 4 8 7 6 5 4 7.762 7.500 7.500 9.300 7.731 D C B A 8 7 6 5 4 3 8 7 6 5 4 3 UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE CRITICAL DIMENSIONS THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO: jdietrich 09/16 XXX 05/19 XXX 05/19 7.762 7.500 7.500 9.300 7.731 XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 8.3" 7.5 " 7.5 " 5.0" 7.8 " XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 7.7 " WM–WALL MOUNT Compatible with universal arm mount, adjustable arm mount, and decorative arm mount. The WA option uses the same wall bracket but replaces the decorative arm with an adjustable arm. XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 9.3" XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 11 SHTS Error: No reference Error: No reference * * * VP1-ASQ.dftjdietrich09/24/21 XXX 05/19/05 XXX 05/19/05 PV:1 14.373 5.000 16.756 21.756 3.477 5.0" Index Page10/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-2-UNV-A3-*** RSSB25-50B-1-B3-*** Notes: Type: S2 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 12/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: ADDITIONAL INFORMATION (CONTINUED) HOUSE SIDE SHIELD FIELD INSTALL ACCESSORIES Instruction Sheet: 93158127_P1Hubbell Lighting701 Millennium Blvd.Greenville, SC 29607 Technical Support: (864) 678-1000Fax: (864) 898-1065www.hubbell.com VPR2x HSS-90-B-xx VPR2x HSS-90-S-xx VPR2x HSS-90-S-xx VPR2x HSS-270-BSS-xx VPR2x HSS-270-FSS-xx VPR2x HSS-270-FSB-xx VPR2x HSS-270-FSB-xx VPR2x HSS-360-xx VPR2x HSS-90-F-xx VPR2 HOUSE SIDE SHIELD ACCESSORY NOMENCLATURE:"x" denotes size 1, 2, 3, or 4"xx" denotes color selection (DBT, GTT,WHT, etc.) Index Page11/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-2-UNV-A3-*** RSSB25-50B-1-B3-*** Notes: Type: S2 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 13/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: ADDITIONAL INFORMATION (CONTINUED) PROGRAMMED CONTROLS ADD-AutoDim Timer Based Options • Light delay options from 1-9 hours after the light is turned on to dim the light by 10-100%. To return the luminaire to its original light level there are dim return options from 1-9 hours after the light has been dimmed previously. EX: ADD-6-5-R6 ADT-AutoDim Time of Day Based Option • Light delay options from 1AM-9PM after the light is turned on to dim the light by 10-100%. To return the luminaire to its original light level there are dim return options from 1AM-9PM after the light has been dimmed previously. EX: ADT-6-5-R6 ADD Control Options Configurations Choices Example Choice Picked Auto-Dim Options 1-9 Hours 6 - Delay 6 hours Auto-Dim Brightness 10-100% Brightness 5 - Dim to 50% brightness Auto-Dim Return Delay 0-9 Hours R6 - Return to full output after 6 hours ADD Control Options Configurations Choices Example Choice Picked Auto-Dim Options 12-3 AM and 6-11 PM 6 - Dim at 6PM Auto-Dim Brightness 10-100% Brightness 5 - Dim to 50% Auto-Dim Return 12-6 AM and 9-11P R6 - Return to full output at 6AM USE OF TRADEMARKS AND TRADE NAMES All product and company names, logos and product identifies are trademarks ™ or registered trademarks ® of Hubbell Lighting, Inc. or their respective owners. Use of them does not necessarily imply any affiliation with or endorsement by such respective owners. Index Page12/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-2-UNV-A3-*** RSSB25-50B-1-B3-*** Notes: Type: S2 INDY22-104626 Beacon Products • 701 Millennium Blvd, Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2020 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA RSS-B POLES-SPEC JuLy 28, 2020 8:45 AM APPLICATIONS • Lighting installations for side and top mounting of luminaires with effective projected area (EPA) not exceeding maximum allowable loading of the specified pole in its installed geographic location CONSTRUCTION • SHAFT: One-piece straight steel with round cross section, Minimum yield of 46,000 psi (ASTM-A500, Grade C); Longitudinal weld seam to appear flush in shaft wall; Steel base plate with axial bolt circle slots welded flush to pole shaft having minimum yield of 36,000 psi (ASTM A36) • BASE COVER: Two-piece square aluminum base cover included standard • POLE CAP: Pole shaft supplied with removable cover when applicable; Tenon and post-top configurations also available • HAND HOLE: Rectangular 3x5 steel hand hole frame (2.38” x 4.38” opening); Mounting provisions for grounding lug located behind gasketed cover • ANCHOR BOLTS: Four galvanized anchor bolts provided per pole with minimum yield of 55,000 psi (ASTM F1554). Galvanized hardware with two washers and two nuts per bolt for leveling FINISH • Durable thermoset polyester powder coat paint finish with nominal 3.0 mil thickness • Powder paint prime applied over “white metal” steel substrate cleaned via mechanical shot blast method • Decorative finish coat available in multiple standard colors; Custom colors available; RAL number preferable; RSS-B SERIES POLES ROUND STRAIGHT STEEL Overall Height 10' - 30' Handhole 18" Cat.# Approvals Job Type BASE DETAILPOLE CAP TENON BASE COVER Bolt Circle (Outer) Bolt Circle (Inner) Bolt Square (Outer) Bolt Square (Inner) 270˚90˚ 180˚ 0˚ Handhole ORDERING INFORMATION SERIES RSS-B Round Straight Steel Pole Beacon RSS B 25 40 A/B/C 2L BLTB2 UL MOUNTING ORIENTATION MOUNTING 1 Single arm mount 2 Two fixtures at 180˚ 2L Two fixtures at 90˚ 3T Three fixtures at 90˚ 3Y Three fixtures at 120˚ 4 Four fixtures at 90˚ TA Tenon (2.375” OD) TB Tenon (2.875” OD) TC Tenon (3.5” OD) OT No drilling (includes pole cap) HEIGHT Reference page 2 Ordering matrix SHAFT Reference page 2 Ordering matrix THICKNESS Reference page 2 Ordering matrix OPTIONS GFI1 20 Amp GFCI Receptacle and Cover EHH1 Extra Handhole C051 .5” Coupling C071 .75” Coupling C201 2” Coupling MPB1 Mid-pole Luminaire Bracket VM2 2nd mode vibration damper LAB Less Anchor Bolts UL UL Certified RBC Round Base Cover ORDERING EXAMPLE: Reference page 2 for available configurations ACCESSORIES- Order Separately Catalog Number Description VM2SXX 2nd mode vibration damper 1 Specify option location using logic found on page 2 (Option Orientation) DRILL PATTERN B1 Cruzer, “AM” arm B3 2 bolt (2-1/2” spacing), Viper “A” arm S2 2 bolt (3-1/2” spacing), Viper “AD” arm FINISH BLT Black Matte Textured BLS Black Gloss Smooth DBT Dark Bronze Matte Textured DBS Dark Bronze Gloss Smooth GTT Graphite Matte Textured LGS Light Grey Gloss Smooth PSS Platinum Silver Smooth WHT White Matte Textured WHS White Gloss Smooth VGT Verde Green Textured Color Option CC Custom Color 22 50 Index Page13/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-2-UNV-A3-*** RSSB25-50B-1-B3-*** Notes: Type: S2 INDY22-104626 Beacon Products • 701 Millennium Blvd, Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2020 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA RSS-B POLES-SPEC JuLy 28, 2020 8:45 AM Overall Height 10'-30' 18" TENON Bolt Circle (Outer) Bolt Circle (Inner) Bolt Square (Outer) Bolt Square (Inner) Height of option in feet BASE COVER 270˚90˚ 180˚ 0˚ Handhole VIBRATION DAMPER 2ND MODE ORDERING INFORMATION Cont. NOTE Factory supplied template must be used when setting anchor bolts. Beacon Products will deny any claim for incorrect anchorage placement resulting from failure to use factory supplied template and anchor bolts. For more information about pole vibration and vibration dampers, please consult http://cdn.beaconproducts.com/content/products/literature/literature_files/Pole_Wind_Induced_Flyer_HLOI0022.pdf Due to our continued efforts to improve our products, product specifications are subject to change without notice. Follow the logic below when ordering location specific options. For each option, include its orientation (in degrees) and its height (in feet). Example: Option C07 should be ordered as: RSS-B-20-40-A-TA-DB-CO5-0-15 (.5” coupling on the handhole/arm side of pole, 15 feet up from the pole base) 1’ spacing required between option. Consult factory for other configurations. OPTION ORIENTATIONGFI – 20 AMP GFCI RECEPTACLE & COVER EHH - EXTRAHANDHOLE C05 - C07 - C20 -COUPLING MPB - MID POLE BRACKET VM2 - VIBRATION DAMPER 2ND MODE VM2SXX - VIBRATION DAMPER 2ND MODE Anchor Base Detail Bolt Circle Bolt Slots/Holes 0°-HandholeBolt Square 270°Arm 1 90° Arm 2 180° As viewed from top of pole. Bolt Circle Bolt Slots/Holes 0°-HandholeBolt Square 270°Arm 1 90° Arm 2 180° As viewed from top of pole. Provision for Grounding 1/2” - 14 NPSC Threads 3/4” - 14 NPSC Threads 2” -11.5 NPSC Threads Round Steel Pole Attachment stub 5” long welded to pole Arm, 3” Sq. x 13.5” long ships separately 2” pipe tenon 4.25” tall Round Steel Pole Standard hand hole frame Adapter plate Gasket 20 AMP GFCI Wet Locations In-use Cover Overall Height 10'-30' 18" TENON Bolt Circle (Outer) Bolt Circle (Inner) Bolt Square (Outer) Bolt Square (Inner) BASE COVER 270˚90˚ 180˚ 0˚ Handhole Factory installed, internal damper designed to alter pole resonance to reduce movement and material fatigue caused by 2nd mode vibration. Field installed, internal damper designed to alter pole resonance to reduce movement and material fatigue caused by 2nd mode vibration. VM2S08 – 8' VM2S12 – 12' VM2S16 – 16' VM2S20 – 20' VM2S24 – 24' Catalog Number Height Nominal Shaft Dimensions Wall Thickness Bolt Circle (suggested) Bolt Circle (range) Bolt Square (range) Base Plate Square Base Plate Thickness Anchor bolt size Bolt Projection Pole weightFeetMeters RSS-B-10-40-A 10 3.0 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 52 RSS-B-12-40-A 12 3.7 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 62 RSS-B-14-40-A 14 4.3 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 72 RSS-B-16-40-A 16 4.9 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 83 RSS-B-18-40-A 18 5.5 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 93 RSS-B-20-40-A 20 6.1 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 103 RSS-B-10-40-B 10 3.0 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 77 RSS-B-12-40-B 12 3.7 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 92 RSS-B-14-40-B 14 4.3 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 107 RSS-B-16-40-B 16 4.9 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 122 RSS-B-18-40-B 18 5.5 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 138 RSS-B-20-40-B 20 6.1 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 153 RSS-B-10-50-B 10 3.0 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 97 RSS-B-12-50-B 12 3.7 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 116 RSS-B-14-50-B 14 4.3 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 135 RSS-B-16-50-B 16 4.9 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 155 RSS-B-18-50-B 18 5.5 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 174 RSS-B-20-50-B 20 6.1 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 193 RSS-B-25-50-B 25 7.6 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 242 RSS-B-20-60-C 20 6.1 6" round 0.250"11"9.0" - 11"6.36" - 7.78"10.25 1.0 1" x 36" x 4"4.5 307 RSS-B-25-60-C 25 7.6 6" round 0.250"11"9.0" - 11"6.36" - 7.78"10.25 1.0 1" x 36" x 4"4.5 384 RSS-B-30-60-C 30 9.1 6" round 0.250"11"9.0" - 11"6.36" - 7.78"10.25 1.0 1" x 36" x 4"4.5 461 VIBRATION DAMPER 2ND MODE Index Page14/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-2-UNV-A3-*** RSSB25-50B-1-B3-*** Notes: Type: S2 INDY22-104626 Beacon Products • 701 Millennium Blvd, Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2020 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA RSS-B POLES-SPEC JuLy 28, 2020 8:45 AM ASCE7-05 WIND MAP FLORIDA REGION WIND MAP 180 180 170 170 160 160 150 150 140 140140150 140 150 130 120 115 115 120 130 • Florida region wind map above is based upon 3-second gust winds and the 2017 Florida Building Code HAWAII – 105 mph PUERTO RICO – 145 mph NOTES: • Values are based on 50 year mean recurrence interval 30’ above grade. • Hawaii has an 105 mph wind velocity. • Puerto Rico has a 125 mph wind velocity. • Caution must be exercised in determining wind velocities in special wind areas such as: Mountainous Regions Areas surrounding the Great Lakes or other large bodies of water or open land. Areas subject to extreme wind conditions, such as hurricanes, typhoons, cyclones, and tornadoes. Areas adjacent to airports. Any specific area with a known or suspected abnormally high intermittent wind condition caused by geography, adjacent structures, or other specific local conditions that may not be recorded in National Weather Service records. • Allowable pole EPA for jobsite wind conditions must be equal to or greater than fixture EPA. Responsibility lies with the specifier for correct pole selection based on AASHTO wind map and job location. • The Wind Map is intended only as a general guide. Always consult local authorities to determine maximum wind velocities, gusting and unique wind conditions for each specific application. • CAUTION: Wind speeds and listed EPAs are for ground mounted installations. Poles mounted on structures (such as bridges and buildings) must consider vibration and coefficient of height factors beyond this general guide. Consult AASHTO standards. • Extreme Wind Events: Hurricanes, Typhoons, Cyclones, or Tornadoes expose poles to flying debris, wind shear, and other unpredictable aerodynamic forces not indicated by the wind velocity ratings. • Pole Strength Limited Warranty: Standard, unmodified Kim lighting Poles installed as recommended, undamaged by corrosion, or lack of maintenance, shall withstand steady wind conditions as provided on page 2 (Allowable Pole EPA). Installation of poles without luminaires, or attachment of any unauthorized accessories to poles shall void this warranty. 85 90 90100110 120 130 130 140 140 140 150 150 14013012011010090 Special Wind Region(Consult Local Authorities) 90 Wind Map United States and Canada Florida Building Code 2017 EPA Load Rating - 3 second gust wind speeds Catalog Number 115 120 130 140 150 160 170 180 RSS-B-10-40-A 25.0 23..5 20.0 17.0 14.5 12.5 11.0 10.0 RSS-B-12-40-A 21.0 19.0 16.0 13.5 11.5 9.5 9.0 8.0 RSS-B-14-40-A 17.5 15.7 13.0 10.8 9.0 7.5 7.0 6.5 RSS-B-16-40-A 14.2 13.0 10.5 8.5 7.0 5.8 5.0 4.5 RSS-B-18-40-A 11.6 10.4 8.2 6.8 5.4 4.4 4.0 3.6 RSS-B-20-40-A 9.5 8.4 6.5 5.2 4.0 3.0 2.8 2.5 RSS-B-10-40-B 25.0 25.0 25.0 22.0 19.0 16.5 15.2 13.4 RSS-B-12-40-B 25.0 25.0 20.8 17.6 15.1 13.0 12.0 10.6 RSS-B-14-40-B 22.5 20.4 17.2 14.4 12.2 10.4 10.0 8.8 RSS-B-16-40-B 18.9 17.0 14.1 11.7 9.8 8.2 7.5 7.0 RSS-B-18-40-B 15.6 14.1 11.5 9.4 7.7 6.4 6.0 5.7 RSS-B-20-40-B 13.0 11.6 9.3 7.5 6.0 4.8 4.0 3.5 RSS-B-10-50-B 25.0 25.0 25.0 25.0 25.0 23.6 20.8 18.4 RSS-B-12-50-B 25.0 25.0 25.0 25.0 22.2 19.3 16.8 14.8 RSS-B-14-50-B 25.0 25.0 23.9 21.5 18.4 15.9 13.8 12.1 RSS-B-16-50-B 25.0 23.8 19.6 18.0 15.4 13.2 11.4 9.9 RSS-B-18-50-B 21.8 19.6 16.1 15.1 12.8 10.8 9.3 8.0 RSS-B-20-50-B 18.2 16.4 14.1 12.7 10.7 9.0 7.7 6.5 RSS-B-25-50-B 11.7 10.2 9.4 8.4 6.8 5.6 4.5 3.7 RSS-B-20-60-C 25.0 25.0 25.0 22.1 18.8 16.1 13.9 12.0 RSS-B-25-60-C 24.7 22.4 18.4 15.3 12.8 10.8 9.1 7.6 RSS-B-30-60-C 18.2 16.3 13.2 10.7 8.7 7.0 5.7 4.5 ASCE 7-05 wind map EPA Load Rating - 3 second gust wind speeds Catalog Number 85 90 100 110 120 105 145 RSS-B-10-40-A 21.0 18.7 15.0 12.2 10.1 13.5 6.8 RSS-B-12-40-A 16.8 14.8 11.8 9.5 7.7 10.5 5.1 RSS-B-14-40-A 13.6 12.0 9.4 7.4 5.9 8.3 3.9 RSS-B-16-40-A 11.1 9.7 7.5 5.8 4.5 6.6 2.9 RSS-B-18-40-A 9.0 7.8 5.8 4.4 3.3 5.1 2 RSS-B-20-40-A 7.2 6.2 4.5 3.1 2.2 3.8 1.2 RSS-B-10-40-B 25.0 25.0 22.4 18.4 15.3 20.2 10.4 RSS-B-12-40-B 25.0 22.3 17.9 14.5 12.0 16.1 8.1 RSS-B-14-40-B 20.6 18.3 14.6 11.7 9.6 13 6.4 RSS-B-16-40-B 17.2 15.2 12.0 9.5 7.7 10.7 5.1 RSS-B-18-40-B 14.3 12.6 9.8 7.6 6.1 8.6 3.9 RSS-B-20-40-B 11.8 10.3 7.9 6.0 4.7 6.9 2.9 RSS-B-10-50-B 25.0 25.0 25.0 25.0 25.0 25.0 17.7 RSS-B-12-50-B 25.0 25.0 25.0 24.8 20.8 25.0 14.3 RSS-B-14-50-B 25.0 25.0 24.7 20.5 17.2 22.4 11.7 RSS-B-16-50-B 25.0 25.0 20.7 17.1 14.3 18.8 9.7 RSS-B-18-50-B 24.5 21.6 17.3 14.3 11.9 15.7 8.0 RSS-B-20-50-B 20.6 18.1 14.4 11.8 9.8 13.0 6.5 RSS-B-25-50-B 13.6 11.7 9.1 7.3 6.0 8.1 3.8 RSS-B-20-60-C 25.0 25.0 25.0 25.0 21.5 25.0 14.8 RSS-B-25-60-C 25.0 25.0 21.9 18.0 15.0 19.8 10.1 RSS-B-30-60-C 21.8 19.4 15.6 12.7 10.6 14.1 6.9 120 110 100 90 90 100 110 120 130 130 130 130 ALASKA REGION WIND MAP *PRINTED WITH PERMISSION FROM ASCE Index Page15/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-2-UNV-A3-*** RSSB25-50B-1-B3-*** Notes: Type: S2 INDY22-104626 Beacon Products • 701 Millennium Blvd, Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2020 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA RSS-B POLES-SPEC JuLy 28, 2020 8:45 AM • Allowable EPA, to determine max pole loading weight, multiply allowable EPA by 30 lbs. • The tables for allowable pole EPA are based on the ASCE 7-05 Wind Map or the Florida Region Wind Map for the 2010 Florida Building Code. The Wind Maps are intended only as a general guide and cannot be used in conjunction with other maps. Always consult local authorities to determine maximum wind velocities, gusting and unique wind conditions for each specific application • Allowable pole EPA for jobsite wind conditions must be equal to or greater than the total EPA for fixtures, arms, and accessories to be assembled to the pole. Responsibility lies with the specifier for correct pole selection. Installation of poles without luminaires or attachment of any unauthorized accessories to poles is discouraged and shall void the manufacturer’s warranty • Wind speeds and listed EPAs are for ground mounted installations. Poles mounted on structures (such as bridges and buildings) must consider vibration and coefficient of height factors beyond this general guide; Consult local and federal standards • Wind Induced Vibration brought on by steady, unidirectional winds and other unpredictable aerodynamic forces are not included in wind velocity ratings. Consult Hubbell Lighting’s Pole Vibration Application Guide for environmental risk factors and design considerations. http://cdn.beaconproducts.com/content/products/literature/literature_files/Pole_Wind_Induced_Flyer_HLOI0022.pdf • Extreme Wind Events like, Hurricanes, Typhoons, Cyclones, or Tornadoes may expose poles to flying debris, wind shear or other detrimental effects not included in wind velocity ratings Due to our continued efforts to improve our products, product specifications are subject to change without notice. Wind-speed Website disclaimer: Hubbell Lighting has no connection to the linked website and makes no representations as to its accuracy. While the information presented on this third-party website provides a useful starting point for analyzing wind conditions, Hubbell Lighting has not verified any of the information on this third party website and assumes no responsibility or liability for its accuracy. The material presented in the windspeed website should not be used or relied upon for any specific application without competent examination and verification of its accuracy, suitability and applicability by engineers or other licensed professionals. Hubbell Lighting Inc. does not intend that the use of this information replace the sound judgment of such competent professionals, having experience and knowledge in the field of practice, nor to substitute for the standard of care required of such professionals in interpreting and applying the results of the windspeed report provided by this website. Users of the information from this third party website assume all liability arising from such use. Use of the output of these referenced websites do not imply approval by the governing building code bodies responsible for building code approval and interpretation for the building site described by latitude/longitude location in the windspeed report. http://windspeed.atcouncil.org NOTES Index Page16/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-170-4K7-3-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S3-BL INDY22-104626 Page 1/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: KEY DATA Lumen Range 5,000–80,000 Wattage Range 36–600 Efficacy Range (LPW)92–155 Weight lbs. (kg)13.7-30.9 (6.2-13.9) CATALOG #: FEATURES • Low profile LED area/site luminaire with a variety of IES distributions for lighting applications such as auto dealership, retail, commercial, and campus parking lots • Featuring two different optical technologies, Strike and Micro Strike Optics, which provide the best distribution patterns for retrofit or new construction • Rated for high vibration applications including bridges and overpasses. All sizes are rated for 1.5G • Control options including photo control, occupancy sensing, NX Distributed Intelligence™, wiSCAPE and 7-Pin with networked controls • New customizable lumen output feature allows for the wattage and lumen output to be customized in the factory to meet whatever specification requirements may entail • Field interchangeable mounting provides additional flexibility after the fixture has shipped CONTROL TECHNOLOGY ™ See Certiﬁcation Speciﬁcations BUY AMERICANSOLUTIONS See Certiﬁcation Speciﬁcations BUY AMERICANSOLUTIONSIP65 VIPER Area/Site VIPER LUMINAIRE CONSTRUCTION • Die-cast housing with hidden vertical heat fins are optimal for heat dissipation while keeping a clean smooth outer surface • Corrosion resistant, die-cast aluminum housing with 1000 hour powder coat paint finish • External hardware is corrosion resistant OPTICS • Micro Strike Optics (160, 320, 480, or 720 LED counts) maximize uniformity in applications and come standard with mid- power LEDs which evenly illuminate the entire luminous surface area to provide a low glare appearance. Catalog logic found on page 2 • Strike Optics (36, 72, 108, or 162 LED counts) provide best in class distributions and maximum pole spacing in new applications with high powered LEDs. Strike optics are held in place with a polycarbonate bezel to mimic the appearance of the Micro Strike Optics so both solutions can be combined on the same application. Catalog logic found on page 3 • Both optics maximize target zone illumination with minimal losses at the house-side, reducing light trespass issues. Additional backlight control shields and house side shields can be added for further reduction of illumination behind the pole • One-piece silicone gasket ensures a weatherproof seal • Zero up-light at 0 degrees of tilt • Field rotatable optics INSTALLATION • Mounting patterns for each arm can be found on page 11 • Optional universal mounting block for ease of installation during retrofit applications. Available as an option (ASQU) or accessory for square and round poles. • All mounting hardware included CONTROLS (CONTINUED) • NX Distributed Intelligence™ available with in fixture wireless control module, features dimming and occupancy sensor • wiSCAPE® available with in fixture wireless control module, features dimming and occupancy sensor. Also available in 7-pin configuration CERTIFICATIONS• Meets the qualifications for DLC Premium • Listed to UL1598 and CSA C22.2#250.0-24 for wet locations and 40˚C ambient temperatures • 1.5 G rated for ANSI C136.31 high vibration applications • Fixture is IP65 rated • Meets IDA recommendations using 3K CCT configuration at 0 degrees of tilt • This product qualifies as a “designated country construction material” per FAR 52.225-11 Buy American-Construction Materials under Trade Agreements effective 04/23/2020. See Buy American Solutions. WARRANTY• 5 year warranty • See HLI Commercial and Industrial Outdoor Lighting Warranty for additional information SPECIFICATIONS INSTALLATION (CONTINUED) • Knuckle arm fitter option available for 2-3/8” OD tenon • For products with EPA less than 1 mounted to a pole greater that 20ft, a vibration damper is recommended ELECTRICAL • Universal 120-277 VAC or 347-480 VAC input voltage, 50/60 Hz • Ambient operating temperature -40˚C to 40˚C • Drivers have greater than 90% power factor and less than 20% THD • LED drivers have output power over-voltage, over-current protection and short circuit protection with auto recovery • Field replaceable surge protection device provides 20kA protection meeting ANSI/ IEEE C62.41.2 Category C High and Surge Location Category C3; Automatically takes fixture off-line for protection when device is compromised CONTROLS • Photo control, occupancy sensor programmable controls, and Zigbee wireless controls available for complete on/off and dimming control • Please consult brand or sales representative when combining control and electrical options as some combinations may not operate as anticipated depending on your application • 7-pin ANSI C136.41-2013 photocontrol receptacle option available for twist lock photocontrols or wireless control modules (control accessories sold separately) • 0- 10V Dimming Drivers are standard and dimming leads are extended out of the luminaire unless control options require connection to the dimming leads. Must specify if wiring leads are to be greater than the 6” standard OPTICS Index Page1/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-170-4K7-3-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S3-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 2/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com MICROSTRIKE OPTICS – ORDERING GUIDE CATALOG # DATE:LOCATION: TYPE:PROJECT: CATALOG #: VP –––––––– Series Optic Platform Size Light Engine CCT/CRI Distribution Optic Rotation Voltage VP Viper Micro Strike 1 Size 1 2 Size 2 3 Size 3 4 Size 4 160L-35 6 5500 lumens 160L-50 6 7500 lumens 160L-75 10000 lumens 160L-100 12500 lumens 160L-115 15000 lumens 160L-135 18000 lumens 160L-160 21000 lumens 320L-145 21000 lumens 320L-170 24000 lumens 320L-185 27000 lumens 320L-210 30000 lumens 320L-235 33000 lumens 320L-255 36000 lumens 320L-315 6 40000 lumens 480L-285 40000 lumens 480L-320 44000 lumens 480L-340 48000 lumens 480L-390 52000 lumens 480L-425 55000 lumens 480L-470 60000 lumens 720L-435 60000 lumens 720L-475 65000 lumens 720L-515 70000 lumens 720L-565 6 75000 lumens 720L-600 6 80000 lumens CLO Custom Lumen Output 1 AP AP-Amber Phosphor Converted 27K8 2700K, 80 CRI 3K7 3000K, 70 CRI 3K8 3000K, 80 CRI 35K8 3500K, 80 CRI 3K9 3000K, 90 CRI 4K7 4000K, 70 CRI 4K8 4000K, 80 CRI 4K9 4000K, 90 CRI 5K7 5000K, 70 CRI 5K8 5000K, 80 CRI 2 Type 2 3 Type 3 4F Type 4 Forward 4W Type 4 Wide 5QM Type 5 Square Medium 5QW Type 5 Square Wide L Optic rotation left R Optic rotation right UNV 120- 277V 120 120V 208 208V 240 240V 277 277V 347 347V 480 480V ––– Mounting Color Options Network Control Options A Arm mount for square pole/flat surface A_Arm mount for round pole 2 ASQU Universal arm mount for square pole A_U Universal arm mount for round pole 2 AAU Adjustable arm for pole mounting (universal drill pattern) AA_U Adjustable arm mount for round pole 2 ADU Decorative upswept Arm (universal drill pattern) AD_U Decorative upswept arm mount for round pole 2 MAF Mast arm fitter for 2-3/8" OD horizontal arm K Knuckle T Trunnion WB Wall Bracket, horizontal tenon with MAF WM Wall mount bracket with decorative upswept arm WA Wall mount bracket with adjustable arm BLT Black Matte Textured BLS Black Gloss Smooth DBT Dark Bronze Matte Textured DBS Dark Bronze Gloss Smooth GTT Graphite Matte Textured LGS Light Grey Gloss Smooth LGT Light Grey Gloss Textured PSS Platinum Silver Smooth WHT White Matte Textured WHS White Gloss Smooth VGT Verde Green Textured Color Option CC Custom Color F Fusing 2PF Dual Power Feed 2DR Dual Driver TE Tooless Entry BC Backlight Control TB Terminal Block NXSPW-14F NX Wireless, PIR Occupancy Sensor, Dimming Daylight Harvesting, 14' 1,3,4 NXSPW-40F NX Wireless, PIR Occupancy Sensor, Dimming Daylight Harvesting, 40' 1,3,4 NXSP-14F NX, PIR Occupancy Sensor, Dimming Daylight Harvesting, 14' 3,4 NXSP-40F NX, PIR Occupancy Sensor, Dimming Daylight Harvesting, 40' 3,4 NXWE NX Wireless Enabled (module + radio) 3,4 WIR wiSCAPE® In-Fixture Module 3,4 WIRSC wiSCAPE® Module and Occupancy Sensor 3,4 Stand Alone Sensors BTS-14F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor 4 BTS-40F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor 4 BTSO-12F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor, up to 12' mounting height 4 7PR 7-Pin Receptacle 4 7PR-SC 7-Pin Receptacle with shorting cap 4 3PR 3-Pin twist lock 4 3PR-SC 3-Pin receptacle with shorting cap 4 3PR-TL 3-Pin PCR with photocontrol 4 Programmed Controls ADD AutoDim Timer Based Dimming 4 ADT AutoDim Time of Day Dimming 4 Photocontrols PC Button Photocontrol 4,7 1 – Items with a grey background can be done as a custom order. Contact brand representative for more information 2 – Replace “_” with “2” for 2.5”-3.4” OD pole, “3” for 3.5”-4.13” OD pole, “4” for 4.18”-5.25” OD pole, “5” for 5.5”-6.5” OD pole 3 – Networked Controls cannot be combined with other control options 4 – Not available with 2PF option 5 – Not available with Dual Driver option 6 – Some voltage restrictions may apply when combined with controls 7 – Not available with 480V Example: VP–2–320L-145–3K7–2–R–UNV–A3–BLT Index Page2/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-170-4K7-3-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S3-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 4/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: Hubbell Control Solutions — Accessories (Sold Separately) NX Distributed Intelligence™ NXOFM- 1R1D-UNV On-fixture Module (7-pin), On / Off / Dim, Daylight Sensor with HubbNET Radio and Bluetooth® Radio, 120–480VAC wiSCAPE® Lighting Control WIR-RME-L On-fixture Module (7-pin or 5-pin), On / Off / Dim, Daylight Sensor with wiSCAPE Radio, 110–480VAC SCP-REMOTE Remote Control for SCP/_F option. Order at least one per project to program and control the occupancy sensor For additional information related to these accessories please visit www.hubbellcontrolsolutions.com. Options provided for use with integrated sensor, please view specification sheet ordering information table for details. ORDERING GUIDE (CONTINUED) CATALOG # –– Accessory Type Size Option SHD Shield MTG Mounting 1 Size 1 2 Size 2 3 Size 3 4 Size 4 HSS-90-B House Side Shield 90º Back HSS-90-F House Side Shield 90º Front HSS-90-S House Side Shield 90º Side HSS-270-BSS House Side Shield 270º Back/Side/Side HSS-270-FSS House Side Shield 270º Front/Side/Side HSS-270-FSB House Side Shield 270º Front/Side/Back HSS-360 House Side Shield 360º BC Back Light Control A Arm Mount for square pole/flat surface ASQU Universal Arm Mount for square pole AAU Adjustable Arm for pole mounting ADU Decorative upswept Arm RPA Round Pole Adapter MAF Mast Arm Fitter for 2-3/8" OD horizontal arm K Knuckle T Trunnion WB Wall Bracket (compatible with universal arm mounts) – Color BLS Black Gloss Smooth BLT Black Matte Textured DBS Dark Bronze Gloss Smooth DBT Dark Bronze Matte Textured GTT Graphite Matte Textured LGS Light Gray Gloss Smooth PSS Platinum Silver Smooth WHS White Gloss Smooth WHT White Matte Textured VGT Green Landscape Decorative LEG Legacy Colors Color Option CC Custom Color CONTROLS ™ Control Option Sensor Networkable Scheduling Occupancy Daylight Harvesting On/Off Control Programming Pair with Sensor Sensor Mounting Height NXWE –✔✔––✔✔–– NXSPW_F NXSM-P ✔✔✔✔✔✔–14ft, 40ft NXSP_F NXSM-P ––✔✔✔––14ft, 40ft BTSO12F BTSMP-OMNI ––✔✔✔Bluetooth –12ft BTS_F BTSMP ––✔✔–––14ft, 40ft ADD ––✔––✔–✔– ADT ––✔––✔–✔– 7PR –Paired with external control Paired with external control –Paired with external control Paired with external control –✔– 7PR-SC –––––––✔– 3PR –––––Paired with external control –✔– 3PR-SC –––––––✔– 3PR-TL ––––✔✔–✔– WIR –✔✔–✔✔Gateway –– WIRSC BTSMP ✔✔✔✔✔Gateway –14ft, 40ft – Accessory Type Option MSC Miscellaneous BIRD SPK Bird Spike Index Page3/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-170-4K7-3-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S3-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 5/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DELIVERED LUMENS DATE:LOCATION: TYPE:PROJECT: CATALOG #: PROJECTED LUMEN MAINTENANCE Ambient Temp.0 25,000 *TM-21-11 36,000 50,000 100,000 Calculated L70 (Hours) 25°C / 77°F 1.00 0.97 0.96 0.95 0.91 408,000 40°C / 104°F 0.99 0.96 0.95 0.94 0.89 356,000 LUMINAIRE AMBIENT TEMPERATURE FACTOR (LATF) Ambient Temperature Lumen Multiplier 0°C 32°F 1.03 10°C 50°F 1.01 20°C 68°F 1.00 25°C 77°F 1.00 30°C 86°F 0.99 40°C 104°F 0.98 50°C 122°F 0.97 For delivered lumens, please see Lumens Data PDF on www.hubbelllighting.com Micro Strike Lumen Multiplier CCT 70 CRI 80 CRI 90 CRI 2700K –0.841 – 3000K 0.977 0.861 0.647 3500K –0.900 – 4000K 1 0.926 0.699 5000K 1 0.937 0.791 Monochromatic Amber Multiplier Amber 0.250 Strike Lumen Multiplier CCT 70 CRI 80 CRI 90 CRI 2700K –0.859 – 3000K 0.941 0.912 0.703 3500K –0.906 – 4000K 1 0.894 0.734 5000K 1 0.879 0.711 Monochromatic Amber Multiplier Amber 0.255 Index Page4/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-170-4K7-3-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S3-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 6/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com ELECTRICAL DATA: MICRO STRIKE DATE:LOCATION: TYPE:PROJECT: CATALOG #: # OF LEDS 160 NOMINAL WATTAGE 35 50 75 100 115 135 160 SYSTEM POWER (W)34.9 50.5 72.1 97.2 111.9 132.2 157.8 INPUT VOLTAGE (V)CURRENT (Amps) 120 0.29 0.42 0.63 0.83 0.96 1.13 1.33 208 0.17 0.24 0.36 0.48 0.55 0.65 0.77 240 0.15 0.21 0.31 0.42 0.48 0.56 0.67 277 0.13 0.18 0.27 0.36 0.42 0.49 0.58 347 0.10 0.14 0.22 0.29 0.33 0.39 0.46 480 0.07 0.10 0.16 0.21 0.24 0.28 0.33 # OF LEDS 320 NOMINAL WATTAGE 145 170 185 210 235 255 315 SYSTEM POWER (W)150 166.8 185.7 216.2 240.9 261.5 312 INPUT VOLTAGE (V)CURRENT (Amps) 120 1.21 1.42 1.54 1.75 1.96 2.13 2.63 208 0.70 0.82 0.89 1.01 1.13 1.23 1.51 240 0.60 0.71 0.77 0.88 0.98 1.06 1.31 277 0.52 0.61 0.67 0.76 0.85 0.92 1.14 347 0.42 0.49 0.53 0.61 0.68 0.73 0.91 480 0.30 0.35 0.39 0.44 0.49 0.53 0.66 # OF LEDS 480 NOMINAL WATTAGE 285 320 340 390 425 470 SYSTEM POWER (W)286.2 316.7 338.4 392.2 423.2 468 INPUT VOLTAGE (V)CURRENT (Amps) 120 2.38 2.67 2.83 3.25 3.54 3.92 208 1.37 1.54 1.63 1.88 2.04 2.26 240 1.19 1.33 1.42 1.63 1.77 1.96 277 1.03 1.16 1.23 1.41 1.53 1.70 347 0.82 0.92 0.98 1.12 1.22 1.35 480 0.59 0.67 0.71 0.81 0.89 0.98 # OF LEDS 720 NOMINAL WATTAGE 435 475 515 565 600 SYSTEM POWER (W)429.3 475 519.1 565.2 599.9 INPUT VOLTAGE (V)CURRENT (Amps) 120 3.63 3.96 4.29 4.71 5.00 208 2.09 2.28 2.48 2.72 2.88 240 1.81 1.98 2.15 2.35 2.50 277 1.57 1.71 1.86 2.04 2.17 347 1.25 1.37 1.48 1.63 1.73 480 0.91 0.99 1.07 1.18 1.25 Index Page5/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-170-4K7-3-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S3-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 7/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: ELECTRICAL DATA: STRIKE CATALOG #: # OF LEDS 36 NOMINAL WATTAGE 39 55 85 105 115 SYSTEM POWER (W)39.6 56.8 83.6 108.2 113.7 INPUT VOLTAGE (V)CURRENT (Amps) 120 0.33 0.46 0.71 0.88 1.00 208 0.19 0.26 0.41 0.50 0.58 240 0.16 0.23 0.35 0.44 0.50 277 0.14 0.20 0.31 0.38 0.43 347 0.11 0.16 0.24 0.30 0.35 480 0.08 0.11 0.18 0.22 0.25 # OF LEDS 72 NOMINAL WATTAGE 120 145 180 210 215 SYSTEM POWER (W)120.9 143.2 179.4 210.2 214.8 INPUT VOLTAGE (V)CURRENT (Amps) 120 0.96 1.21 1.50 1.75 2.00 208 0.55 0.70 0.87 1.01 1.15 240 0.48 0.60 0.75 0.88 1.00 277 0.42 0.52 0.65 0.76 0.87 347 0.33 0.42 0.52 0.61 0.69 480 0.24 0.30 0.38 0.44 0.50 # OF LEDS 108 NOMINAL WATTAGE 240 250 280 320 325 SYSTEM POWER (W)241.7 250.8 278.3 322.1 324.7 INPUT VOLTAGE (V)CURRENT (Amps) 120 1.79 2.08 2.33 2.71 3.04 208 1.03 1.20 1.35 1.56 1.75 240 0.90 1.04 1.17 1.35 1.52 277 0.78 0.90 1.01 1.17 1.32 347 0.62 0.72 0.81 0.94 1.05 480 0.45 0.52 0.58 0.68 0.76 # OF LEDS 162 NOMINAL WATTAGE 365 405 445 485 545 SYSTEM POWER (W)362.6 403.6 445.1 487.1 543.9 INPUT VOLTAGE (V)CURRENT (Amps) 120 2.67 3.38 3.71 4.04 4.54 208 1.54 1.95 2.14 2.33 2.62 240 1.33 1.69 1.85 2.02 2.27 277 1.16 1.46 1.61 1.75 1.97 347 0.92 1.17 1.28 1.40 1.57 480 0.67 0.84 0.93 1.01 1.14 Index Page6/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-170-4K7-3-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S3-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 8/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: MICRO STRIKE PHOTOMETRY The following diagrams represent the general distribution options offered for this product. For detailed information on specific product configurations, see website photometric test reports. Type 2Type 2 Type 4F Type 4WType 4 Wide Type 5QMType 4F Type 5QMType 5QM Type 5QW Type 3Type 3 Index Page7/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-170-4K7-3-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S3-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 9/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: OPTIC STRIKE PHOTOMETRY The following diagrams represent the general distribution options offered for this product. For detailed information on specific product configurations, see website photometric test reports. Type FR - Front Row/Auto OpticType FR – Front Row/Auto Optic Type 4Type 4 Forward Type 2Type 2 Type 4 WideType 4 Wide Type 5R (rectangular)Type 5R (rectangular) Type CornerType Corner Type 3Type 3 Type 5QMType 5QM Type 5W (round wide)Type 5W (round wide)Type TC (tennis court)Type TC Index Page8/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-170-4K7-3-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S3-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 10/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: DIMENSIONS EPA VP1 (Size 1)VP2 (Size 2)VP3 (Size 3)VP4 (Size 4)Config. Single Fixture 0.454 0.555 0.655 0.698 Two at 180 0.908 1.110 1.310 1.396 Two at 90 0.583 0.711 0.857 0.948 Three at 90 1.037 1.266 1.512 1.646 Three at 120 0.943 1.155 1.392 1.680 Four at 90 1.166 1.422 1.714 1.896 Weight lbs kgs VP1 (Size 1)13.7 6.2 VP2 (Size 2)16.0 7.26 VP3 (Size 3)25.9 11.7 VP4 (Size 4)30.8 13.9 XX XX/XX/XX ECO-XXXX XXX XXX 12765432 D C B A 1276543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 11 SHTS Error: No reference Error: No reference * * * VP1-ASQ.dftjdietrich09/24/21 XXX 05/19/05 XXX 05/19/05 PV:1 14.373 5.000 16.756 21.756 3.477 SIZE 1 SIZE 3 SIZE 2 SIZE 4 5.00 16.76 14.37 21.76 3.48 XX XX/XX/XX ECO-XXXX XXX D C B A 128765432 12876543 This document contains confidential and proprietary information Lighting. Receipt or possession of this document does not conv rights to reproduce or disclose its contents, or to make, use , or anything it may disclose. Reproduction, disclosure, or use of the or its contents, without the specific written authorization of Hubb Lighting, may violate the intellectual property rights of Hubbell L UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. DESNRECORDDATEREV SHT 12 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 5.000 21.877 14.373 26.876 3.477 5.00 21.88 14.37 26.88 3.48 XX XX/XX/XX ECO-XXXX XXX XXX 12765432 D C B A 1276543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 11 SHTS Error: No reference Error: No reference * * * VP3-ASQ.dftjdietrich09/24/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.500 16.113 34.476 3.477 26.976 XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 11 SHTS Error: No reference Error: No reference * * * VP4-ASQ.dftjdietrich09/24/21 XXX 05/19/05 XXX 05/19/05 PV:1 19.622 7.500 27.980 35.476 3.477 7.50 7.50 3.48 3.48 26.97 34.47 27.98 19.62 35.48 Index Page9/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-170-4K7-3-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S3-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 11/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: MOUNTING ASQ–STRAIGHT ARM MOUNT Fixture ships with integral arm for ease of installation. Compatible with Hubbell Outdoor B3 drill pattern. For round poles add applicable suffix (2/3/4/5) ASQU–UNIVERSAL ARM MOUNT Universal mounting block for ease of installation. Compatible with drill patterns from 2.5" to 4.5" and Hubbell drill pattern S2. For round poles add applicable suffix (2/3/4/5) AAU–ADJUSTABLE ARM FOR POLE MOUNTING Rotatable arm mounts directly to pole. Compatible with drill patterns from 2.5" to 4.5" and Hubbell drill pattern S2. For round poles add applicable suffix (2/3/4/5). Rotatable in 15˚ aiming angle increments. Micro Strike configurations have a 45° aiming limitation. Strike configurations have a 30° aiming limitation. ADU–DECORATIVE UPSWEPT ARM Upswept Arm compatible with drill patterns from 2.5" to 4.5". For round poles add applicable suffix (2/3/4/5). MAF–MAST ARM FITTER Fits 2-3/8" OD horizontal tenons. K–KNUCKLE Knuckle mount 15˚ aiming angle increments for precise aiming and control, fits 2-3/8" tenons or pipes. Micro Strike configurations have a 45° aiming limitation. Strike configurations have a 30° aiming limitation. T–TRUNNION Trunnion for surface and crossarm mounting using (1) 3/4" or (2) 1/2" size through bolts. Micro Strike configurations have a 45° aiming limitation. Strike configurations have a 30° aiming limitation. XX XX/XX/XX ECO-XXXX XXX XXX 12765432 D C B A 1276543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 D C B A 8 7 6 5 4 8 7 6 5 4 7.762 7.500 7.500 9.300 7.731 D C B A 8 7 6 5 4 3 8 7 6 5 4 3 UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE CRITICAL DIMENSIONS THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO: jdietrich 09/16 XXX 05/19 XXX 05/19 7.762 7.500 7.500 9.300 7.731 XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 8.3" 7.5 " 7.5 " 5.0" 7.8 " XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 7.7 " WM–WALL MOUNT Compatible with universal arm mount, adjustable arm mount, and decorative arm mount. The WA option uses the same wall bracket but replaces the decorative arm with an adjustable arm. XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 9.3" XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 11 SHTS Error: No reference Error: No reference * * * VP1-ASQ.dftjdietrich09/24/21 XXX 05/19/05 XXX 05/19/05 PV:1 14.373 5.000 16.756 21.756 3.477 5.0" Index Page10/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-170-4K7-3-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S3-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 12/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: ADDITIONAL INFORMATION (CONTINUED) HOUSE SIDE SHIELD FIELD INSTALL ACCESSORIES Instruction Sheet: 93158127_P1Hubbell Lighting701 Millennium Blvd.Greenville, SC 29607 Technical Support: (864) 678-1000Fax: (864) 898-1065www.hubbell.com VPR2x HSS-90-B-xx VPR2x HSS-90-S-xx VPR2x HSS-90-S-xx VPR2x HSS-270-BSS-xx VPR2x HSS-270-FSS-xx VPR2x HSS-270-FSB-xx VPR2x HSS-270-FSB-xx VPR2x HSS-360-xx VPR2x HSS-90-F-xx VPR2 HOUSE SIDE SHIELD ACCESSORY NOMENCLATURE:"x" denotes size 1, 2, 3, or 4"xx" denotes color selection (DBT, GTT,WHT, etc.) Index Page11/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-170-4K7-3-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S3-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 13/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: ADDITIONAL INFORMATION (CONTINUED) PROGRAMMED CONTROLS ADD-AutoDim Timer Based Options • Light delay options from 1-9 hours after the light is turned on to dim the light by 10-100%. To return the luminaire to its original light level there are dim return options from 1-9 hours after the light has been dimmed previously. EX: ADD-6-5-R6 ADT-AutoDim Time of Day Based Option • Light delay options from 1AM-9PM after the light is turned on to dim the light by 10-100%. To return the luminaire to its original light level there are dim return options from 1AM-9PM after the light has been dimmed previously. EX: ADT-6-5-R6 ADD Control Options Configurations Choices Example Choice Picked Auto-Dim Options 1-9 Hours 6 - Delay 6 hours Auto-Dim Brightness 10-100% Brightness 5 - Dim to 50% brightness Auto-Dim Return Delay 0-9 Hours R6 - Return to full output after 6 hours ADD Control Options Configurations Choices Example Choice Picked Auto-Dim Options 12-3 AM and 6-11 PM 6 - Dim at 6PM Auto-Dim Brightness 10-100% Brightness 5 - Dim to 50% Auto-Dim Return 12-6 AM and 9-11P R6 - Return to full output at 6AM USE OF TRADEMARKS AND TRADE NAMES All product and company names, logos and product identifies are trademarks ™ or registered trademarks ® of Hubbell Lighting, Inc. or their respective owners. Use of them does not necessarily imply any affiliation with or endorsement by such respective owners. Index Page12/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-170-4K7-3-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S3-BL INDY22-104626 Beacon Products • 701 Millennium Blvd, Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2020 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA RSS-B POLES-SPEC JuLy 28, 2020 8:45 AM APPLICATIONS • Lighting installations for side and top mounting of luminaires with effective projected area (EPA) not exceeding maximum allowable loading of the specified pole in its installed geographic location CONSTRUCTION • SHAFT: One-piece straight steel with round cross section, Minimum yield of 46,000 psi (ASTM-A500, Grade C); Longitudinal weld seam to appear flush in shaft wall; Steel base plate with axial bolt circle slots welded flush to pole shaft having minimum yield of 36,000 psi (ASTM A36) • BASE COVER: Two-piece square aluminum base cover included standard • POLE CAP: Pole shaft supplied with removable cover when applicable; Tenon and post-top configurations also available • HAND HOLE: Rectangular 3x5 steel hand hole frame (2.38” x 4.38” opening); Mounting provisions for grounding lug located behind gasketed cover • ANCHOR BOLTS: Four galvanized anchor bolts provided per pole with minimum yield of 55,000 psi (ASTM F1554). Galvanized hardware with two washers and two nuts per bolt for leveling FINISH • Durable thermoset polyester powder coat paint finish with nominal 3.0 mil thickness • Powder paint prime applied over “white metal” steel substrate cleaned via mechanical shot blast method • Decorative finish coat available in multiple standard colors; Custom colors available; RAL number preferable; RSS-B SERIES POLES ROUND STRAIGHT STEEL Overall Height 10' - 30' Handhole 18" Cat.# Approvals Job Type BASE DETAILPOLE CAP TENON BASE COVER Bolt Circle (Outer) Bolt Circle (Inner) Bolt Square (Outer) Bolt Square (Inner) 270˚90˚ 180˚ 0˚ Handhole ORDERING INFORMATION SERIES RSS-B Round Straight Steel Pole Beacon RSS B 25 40 A/B/C 2L BLTB2 UL MOUNTING ORIENTATION MOUNTING 1 Single arm mount 2 Two fixtures at 180˚ 2L Two fixtures at 90˚ 3T Three fixtures at 90˚ 3Y Three fixtures at 120˚ 4 Four fixtures at 90˚ TA Tenon (2.375” OD) TB Tenon (2.875” OD) TC Tenon (3.5” OD) OT No drilling (includes pole cap) HEIGHT Reference page 2 Ordering matrix SHAFT Reference page 2 Ordering matrix THICKNESS Reference page 2 Ordering matrix OPTIONS GFI1 20 Amp GFCI Receptacle and Cover EHH1 Extra Handhole C051 .5” Coupling C071 .75” Coupling C201 2” Coupling MPB1 Mid-pole Luminaire Bracket VM2 2nd mode vibration damper LAB Less Anchor Bolts UL UL Certified RBC Round Base Cover ORDERING EXAMPLE: Reference page 2 for available configurations ACCESSORIES- Order Separately Catalog Number Description VM2SXX 2nd mode vibration damper 1 Specify option location using logic found on page 2 (Option Orientation) DRILL PATTERN B1 Cruzer, “AM” arm B3 2 bolt (2-1/2” spacing), Viper “A” arm S2 2 bolt (3-1/2” spacing), Viper “AD” arm FINISH BLT Black Matte Textured BLS Black Gloss Smooth DBT Dark Bronze Matte Textured DBS Dark Bronze Gloss Smooth GTT Graphite Matte Textured LGS Light Grey Gloss Smooth PSS Platinum Silver Smooth WHT White Matte Textured WHS White Gloss Smooth VGT Verde Green Textured Color Option CC Custom Color 22 50 Index Page13/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-170-4K7-3-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S3-BL INDY22-104626 Beacon Products • 701 Millennium Blvd, Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2020 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA RSS-B POLES-SPEC JuLy 28, 2020 8:45 AM Overall Height 10'-30' 18" TENON Bolt Circle (Outer) Bolt Circle (Inner) Bolt Square (Outer) Bolt Square (Inner) Height of option in feet BASE COVER 270˚90˚ 180˚ 0˚ Handhole VIBRATION DAMPER 2ND MODE ORDERING INFORMATION Cont. NOTE Factory supplied template must be used when setting anchor bolts. Beacon Products will deny any claim for incorrect anchorage placement resulting from failure to use factory supplied template and anchor bolts. For more information about pole vibration and vibration dampers, please consult http://cdn.beaconproducts.com/content/products/literature/literature_files/Pole_Wind_Induced_Flyer_HLOI0022.pdf Due to our continued efforts to improve our products, product specifications are subject to change without notice. Follow the logic below when ordering location specific options. For each option, include its orientation (in degrees) and its height (in feet). Example: Option C07 should be ordered as: RSS-B-20-40-A-TA-DB-CO5-0-15 (.5” coupling on the handhole/arm side of pole, 15 feet up from the pole base) 1’ spacing required between option. Consult factory for other configurations. OPTION ORIENTATIONGFI – 20 AMP GFCI RECEPTACLE & COVER EHH - EXTRAHANDHOLE C05 - C07 - C20 -COUPLING MPB - MID POLE BRACKET VM2 - VIBRATION DAMPER 2ND MODE VM2SXX - VIBRATION DAMPER 2ND MODE Anchor Base Detail Bolt Circle Bolt Slots/Holes 0°-HandholeBolt Square 270°Arm 1 90° Arm 2 180° As viewed from top of pole. Bolt Circle Bolt Slots/Holes 0°-HandholeBolt Square 270°Arm 1 90° Arm 2 180° As viewed from top of pole. Provision for Grounding 1/2” - 14 NPSC Threads 3/4” - 14 NPSC Threads 2” -11.5 NPSC Threads Round Steel Pole Attachment stub 5” long welded to pole Arm, 3” Sq. x 13.5” long ships separately 2” pipe tenon 4.25” tall Round Steel Pole Standard hand hole frame Adapter plate Gasket 20 AMP GFCI Wet Locations In-use Cover Overall Height 10'-30' 18" TENON Bolt Circle (Outer) Bolt Circle (Inner) Bolt Square (Outer) Bolt Square (Inner) BASE COVER 270˚90˚ 180˚ 0˚ Handhole Factory installed, internal damper designed to alter pole resonance to reduce movement and material fatigue caused by 2nd mode vibration. Field installed, internal damper designed to alter pole resonance to reduce movement and material fatigue caused by 2nd mode vibration. VM2S08 – 8' VM2S12 – 12' VM2S16 – 16' VM2S20 – 20' VM2S24 – 24' Catalog Number Height Nominal Shaft Dimensions Wall Thickness Bolt Circle (suggested) Bolt Circle (range) Bolt Square (range) Base Plate Square Base Plate Thickness Anchor bolt size Bolt Projection Pole weightFeetMeters RSS-B-10-40-A 10 3.0 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 52 RSS-B-12-40-A 12 3.7 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 62 RSS-B-14-40-A 14 4.3 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 72 RSS-B-16-40-A 16 4.9 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 83 RSS-B-18-40-A 18 5.5 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 93 RSS-B-20-40-A 20 6.1 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 103 RSS-B-10-40-B 10 3.0 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 77 RSS-B-12-40-B 12 3.7 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 92 RSS-B-14-40-B 14 4.3 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 107 RSS-B-16-40-B 16 4.9 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 122 RSS-B-18-40-B 18 5.5 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 138 RSS-B-20-40-B 20 6.1 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 153 RSS-B-10-50-B 10 3.0 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 97 RSS-B-12-50-B 12 3.7 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 116 RSS-B-14-50-B 14 4.3 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 135 RSS-B-16-50-B 16 4.9 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 155 RSS-B-18-50-B 18 5.5 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 174 RSS-B-20-50-B 20 6.1 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 193 RSS-B-25-50-B 25 7.6 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 242 RSS-B-20-60-C 20 6.1 6" round 0.250"11"9.0" - 11"6.36" - 7.78"10.25 1.0 1" x 36" x 4"4.5 307 RSS-B-25-60-C 25 7.6 6" round 0.250"11"9.0" - 11"6.36" - 7.78"10.25 1.0 1" x 36" x 4"4.5 384 RSS-B-30-60-C 30 9.1 6" round 0.250"11"9.0" - 11"6.36" - 7.78"10.25 1.0 1" x 36" x 4"4.5 461 VIBRATION DAMPER 2ND MODE Index Page14/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-170-4K7-3-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S3-BL INDY22-104626 Beacon Products • 701 Millennium Blvd, Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2020 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA RSS-B POLES-SPEC JuLy 28, 2020 8:45 AM ASCE7-05 WIND MAP FLORIDA REGION WIND MAP 180 180 170 170 160 160 150 150 140 140140150 140 150 130 120 115 115 120 130 • Florida region wind map above is based upon 3-second gust winds and the 2017 Florida Building Code HAWAII – 105 mph PUERTO RICO – 145 mph NOTES: • Values are based on 50 year mean recurrence interval 30’ above grade. • Hawaii has an 105 mph wind velocity. • Puerto Rico has a 125 mph wind velocity. • Caution must be exercised in determining wind velocities in special wind areas such as: Mountainous Regions Areas surrounding the Great Lakes or other large bodies of water or open land. Areas subject to extreme wind conditions, such as hurricanes, typhoons, cyclones, and tornadoes. Areas adjacent to airports. Any specific area with a known or suspected abnormally high intermittent wind condition caused by geography, adjacent structures, or other specific local conditions that may not be recorded in National Weather Service records. • Allowable pole EPA for jobsite wind conditions must be equal to or greater than fixture EPA. Responsibility lies with the specifier for correct pole selection based on AASHTO wind map and job location. • The Wind Map is intended only as a general guide. Always consult local authorities to determine maximum wind velocities, gusting and unique wind conditions for each specific application. • CAUTION: Wind speeds and listed EPAs are for ground mounted installations. Poles mounted on structures (such as bridges and buildings) must consider vibration and coefficient of height factors beyond this general guide. Consult AASHTO standards. • Extreme Wind Events: Hurricanes, Typhoons, Cyclones, or Tornadoes expose poles to flying debris, wind shear, and other unpredictable aerodynamic forces not indicated by the wind velocity ratings. • Pole Strength Limited Warranty: Standard, unmodified Kim lighting Poles installed as recommended, undamaged by corrosion, or lack of maintenance, shall withstand steady wind conditions as provided on page 2 (Allowable Pole EPA). Installation of poles without luminaires, or attachment of any unauthorized accessories to poles shall void this warranty. 85 90 90100110 120 130 130 140 140 140 150 150 14013012011010090 Special Wind Region(Consult Local Authorities) 90 Wind Map United States and Canada Florida Building Code 2017 EPA Load Rating - 3 second gust wind speeds Catalog Number 115 120 130 140 150 160 170 180 RSS-B-10-40-A 25.0 23..5 20.0 17.0 14.5 12.5 11.0 10.0 RSS-B-12-40-A 21.0 19.0 16.0 13.5 11.5 9.5 9.0 8.0 RSS-B-14-40-A 17.5 15.7 13.0 10.8 9.0 7.5 7.0 6.5 RSS-B-16-40-A 14.2 13.0 10.5 8.5 7.0 5.8 5.0 4.5 RSS-B-18-40-A 11.6 10.4 8.2 6.8 5.4 4.4 4.0 3.6 RSS-B-20-40-A 9.5 8.4 6.5 5.2 4.0 3.0 2.8 2.5 RSS-B-10-40-B 25.0 25.0 25.0 22.0 19.0 16.5 15.2 13.4 RSS-B-12-40-B 25.0 25.0 20.8 17.6 15.1 13.0 12.0 10.6 RSS-B-14-40-B 22.5 20.4 17.2 14.4 12.2 10.4 10.0 8.8 RSS-B-16-40-B 18.9 17.0 14.1 11.7 9.8 8.2 7.5 7.0 RSS-B-18-40-B 15.6 14.1 11.5 9.4 7.7 6.4 6.0 5.7 RSS-B-20-40-B 13.0 11.6 9.3 7.5 6.0 4.8 4.0 3.5 RSS-B-10-50-B 25.0 25.0 25.0 25.0 25.0 23.6 20.8 18.4 RSS-B-12-50-B 25.0 25.0 25.0 25.0 22.2 19.3 16.8 14.8 RSS-B-14-50-B 25.0 25.0 23.9 21.5 18.4 15.9 13.8 12.1 RSS-B-16-50-B 25.0 23.8 19.6 18.0 15.4 13.2 11.4 9.9 RSS-B-18-50-B 21.8 19.6 16.1 15.1 12.8 10.8 9.3 8.0 RSS-B-20-50-B 18.2 16.4 14.1 12.7 10.7 9.0 7.7 6.5 RSS-B-25-50-B 11.7 10.2 9.4 8.4 6.8 5.6 4.5 3.7 RSS-B-20-60-C 25.0 25.0 25.0 22.1 18.8 16.1 13.9 12.0 RSS-B-25-60-C 24.7 22.4 18.4 15.3 12.8 10.8 9.1 7.6 RSS-B-30-60-C 18.2 16.3 13.2 10.7 8.7 7.0 5.7 4.5 ASCE 7-05 wind map EPA Load Rating - 3 second gust wind speeds Catalog Number 85 90 100 110 120 105 145 RSS-B-10-40-A 21.0 18.7 15.0 12.2 10.1 13.5 6.8 RSS-B-12-40-A 16.8 14.8 11.8 9.5 7.7 10.5 5.1 RSS-B-14-40-A 13.6 12.0 9.4 7.4 5.9 8.3 3.9 RSS-B-16-40-A 11.1 9.7 7.5 5.8 4.5 6.6 2.9 RSS-B-18-40-A 9.0 7.8 5.8 4.4 3.3 5.1 2 RSS-B-20-40-A 7.2 6.2 4.5 3.1 2.2 3.8 1.2 RSS-B-10-40-B 25.0 25.0 22.4 18.4 15.3 20.2 10.4 RSS-B-12-40-B 25.0 22.3 17.9 14.5 12.0 16.1 8.1 RSS-B-14-40-B 20.6 18.3 14.6 11.7 9.6 13 6.4 RSS-B-16-40-B 17.2 15.2 12.0 9.5 7.7 10.7 5.1 RSS-B-18-40-B 14.3 12.6 9.8 7.6 6.1 8.6 3.9 RSS-B-20-40-B 11.8 10.3 7.9 6.0 4.7 6.9 2.9 RSS-B-10-50-B 25.0 25.0 25.0 25.0 25.0 25.0 17.7 RSS-B-12-50-B 25.0 25.0 25.0 24.8 20.8 25.0 14.3 RSS-B-14-50-B 25.0 25.0 24.7 20.5 17.2 22.4 11.7 RSS-B-16-50-B 25.0 25.0 20.7 17.1 14.3 18.8 9.7 RSS-B-18-50-B 24.5 21.6 17.3 14.3 11.9 15.7 8.0 RSS-B-20-50-B 20.6 18.1 14.4 11.8 9.8 13.0 6.5 RSS-B-25-50-B 13.6 11.7 9.1 7.3 6.0 8.1 3.8 RSS-B-20-60-C 25.0 25.0 25.0 25.0 21.5 25.0 14.8 RSS-B-25-60-C 25.0 25.0 21.9 18.0 15.0 19.8 10.1 RSS-B-30-60-C 21.8 19.4 15.6 12.7 10.6 14.1 6.9 120 110 100 90 90 100 110 120 130 130 130 130 ALASKA REGION WIND MAP *PRINTED WITH PERMISSION FROM ASCE Index Page15/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-170-4K7-3-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S3-BL INDY22-104626 Beacon Products • 701 Millennium Blvd, Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2020 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA RSS-B POLES-SPEC JuLy 28, 2020 8:45 AM • Allowable EPA, to determine max pole loading weight, multiply allowable EPA by 30 lbs. • The tables for allowable pole EPA are based on the ASCE 7-05 Wind Map or the Florida Region Wind Map for the 2010 Florida Building Code. The Wind Maps are intended only as a general guide and cannot be used in conjunction with other maps. Always consult local authorities to determine maximum wind velocities, gusting and unique wind conditions for each specific application • Allowable pole EPA for jobsite wind conditions must be equal to or greater than the total EPA for fixtures, arms, and accessories to be assembled to the pole. Responsibility lies with the specifier for correct pole selection. Installation of poles without luminaires or attachment of any unauthorized accessories to poles is discouraged and shall void the manufacturer’s warranty • Wind speeds and listed EPAs are for ground mounted installations. Poles mounted on structures (such as bridges and buildings) must consider vibration and coefficient of height factors beyond this general guide; Consult local and federal standards • Wind Induced Vibration brought on by steady, unidirectional winds and other unpredictable aerodynamic forces are not included in wind velocity ratings. Consult Hubbell Lighting’s Pole Vibration Application Guide for environmental risk factors and design considerations. http://cdn.beaconproducts.com/content/products/literature/literature_files/Pole_Wind_Induced_Flyer_HLOI0022.pdf • Extreme Wind Events like, Hurricanes, Typhoons, Cyclones, or Tornadoes may expose poles to flying debris, wind shear or other detrimental effects not included in wind velocity ratings Due to our continued efforts to improve our products, product specifications are subject to change without notice. Wind-speed Website disclaimer: Hubbell Lighting has no connection to the linked website and makes no representations as to its accuracy. While the information presented on this third-party website provides a useful starting point for analyzing wind conditions, Hubbell Lighting has not verified any of the information on this third party website and assumes no responsibility or liability for its accuracy. The material presented in the windspeed website should not be used or relied upon for any specific application without competent examination and verification of its accuracy, suitability and applicability by engineers or other licensed professionals. Hubbell Lighting Inc. does not intend that the use of this information replace the sound judgment of such competent professionals, having experience and knowledge in the field of practice, nor to substitute for the standard of care required of such professionals in interpreting and applying the results of the windspeed report provided by this website. Users of the information from this third party website assume all liability arising from such use. Use of the output of these referenced websites do not imply approval by the governing building code bodies responsible for building code approval and interpretation for the building site described by latitude/longitude location in the windspeed report. http://windspeed.atcouncil.org NOTES Index Page16/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4F-UNV-A3-***- RSSB25-50B-1-B3-*** Notes: Type: S4 INDY22-104626 Page 1/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: KEY DATA Lumen Range 5,000–80,000 Wattage Range 36–600 Efficacy Range (LPW)92–155 Weight lbs. (kg)13.7-30.9 (6.2-13.9) CATALOG #: FEATURES • Low profile LED area/site luminaire with a variety of IES distributions for lighting applications such as auto dealership, retail, commercial, and campus parking lots • Featuring two different optical technologies, Strike and Micro Strike Optics, which provide the best distribution patterns for retrofit or new construction • Rated for high vibration applications including bridges and overpasses. All sizes are rated for 1.5G • Control options including photo control, occupancy sensing, NX Distributed Intelligence™, wiSCAPE and 7-Pin with networked controls • New customizable lumen output feature allows for the wattage and lumen output to be customized in the factory to meet whatever specification requirements may entail • Field interchangeable mounting provides additional flexibility after the fixture has shipped CONTROL TECHNOLOGY ™ See Certiﬁcation Speciﬁcations BUY AMERICANSOLUTIONS See Certiﬁcation Speciﬁcations BUY AMERICANSOLUTIONSIP65 VIPER Area/Site VIPER LUMINAIRE CONSTRUCTION • Die-cast housing with hidden vertical heat fins are optimal for heat dissipation while keeping a clean smooth outer surface • Corrosion resistant, die-cast aluminum housing with 1000 hour powder coat paint finish • External hardware is corrosion resistant OPTICS • Micro Strike Optics (160, 320, 480, or 720 LED counts) maximize uniformity in applications and come standard with mid- power LEDs which evenly illuminate the entire luminous surface area to provide a low glare appearance. Catalog logic found on page 2 • Strike Optics (36, 72, 108, or 162 LED counts) provide best in class distributions and maximum pole spacing in new applications with high powered LEDs. Strike optics are held in place with a polycarbonate bezel to mimic the appearance of the Micro Strike Optics so both solutions can be combined on the same application. Catalog logic found on page 3 • Both optics maximize target zone illumination with minimal losses at the house-side, reducing light trespass issues. Additional backlight control shields and house side shields can be added for further reduction of illumination behind the pole • One-piece silicone gasket ensures a weatherproof seal • Zero up-light at 0 degrees of tilt • Field rotatable optics INSTALLATION • Mounting patterns for each arm can be found on page 11 • Optional universal mounting block for ease of installation during retrofit applications. Available as an option (ASQU) or accessory for square and round poles. • All mounting hardware included CONTROLS (CONTINUED) • NX Distributed Intelligence™ available with in fixture wireless control module, features dimming and occupancy sensor • wiSCAPE® available with in fixture wireless control module, features dimming and occupancy sensor. Also available in 7-pin configuration CERTIFICATIONS• Meets the qualifications for DLC Premium • Listed to UL1598 and CSA C22.2#250.0-24 for wet locations and 40˚C ambient temperatures • 1.5 G rated for ANSI C136.31 high vibration applications • Fixture is IP65 rated • Meets IDA recommendations using 3K CCT configuration at 0 degrees of tilt • This product qualifies as a “designated country construction material” per FAR 52.225-11 Buy American-Construction Materials under Trade Agreements effective 04/23/2020. See Buy American Solutions. WARRANTY• 5 year warranty • See HLI Commercial and Industrial Outdoor Lighting Warranty for additional information SPECIFICATIONS INSTALLATION (CONTINUED) • Knuckle arm fitter option available for 2-3/8” OD tenon • For products with EPA less than 1 mounted to a pole greater that 20ft, a vibration damper is recommended ELECTRICAL • Universal 120-277 VAC or 347-480 VAC input voltage, 50/60 Hz • Ambient operating temperature -40˚C to 40˚C • Drivers have greater than 90% power factor and less than 20% THD • LED drivers have output power over-voltage, over-current protection and short circuit protection with auto recovery • Field replaceable surge protection device provides 20kA protection meeting ANSI/ IEEE C62.41.2 Category C High and Surge Location Category C3; Automatically takes fixture off-line for protection when device is compromised CONTROLS • Photo control, occupancy sensor programmable controls, and Zigbee wireless controls available for complete on/off and dimming control • Please consult brand or sales representative when combining control and electrical options as some combinations may not operate as anticipated depending on your application • 7-pin ANSI C136.41-2013 photocontrol receptacle option available for twist lock photocontrols or wireless control modules (control accessories sold separately) • 0- 10V Dimming Drivers are standard and dimming leads are extended out of the luminaire unless control options require connection to the dimming leads. Must specify if wiring leads are to be greater than the 6” standard OPTICS Index Page1/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4F-UNV-A3-***- RSSB25-50B-1-B3-*** Notes: Type: S4 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 2/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com MICROSTRIKE OPTICS – ORDERING GUIDE CATALOG # DATE:LOCATION: TYPE:PROJECT: CATALOG #: VP –––––––– Series Optic Platform Size Light Engine CCT/CRI Distribution Optic Rotation Voltage VP Viper Micro Strike 1 Size 1 2 Size 2 3 Size 3 4 Size 4 160L-35 6 5500 lumens 160L-50 6 7500 lumens 160L-75 10000 lumens 160L-100 12500 lumens 160L-115 15000 lumens 160L-135 18000 lumens 160L-160 21000 lumens 320L-145 21000 lumens 320L-170 24000 lumens 320L-185 27000 lumens 320L-210 30000 lumens 320L-235 33000 lumens 320L-255 36000 lumens 320L-315 6 40000 lumens 480L-285 40000 lumens 480L-320 44000 lumens 480L-340 48000 lumens 480L-390 52000 lumens 480L-425 55000 lumens 480L-470 60000 lumens 720L-435 60000 lumens 720L-475 65000 lumens 720L-515 70000 lumens 720L-565 6 75000 lumens 720L-600 6 80000 lumens CLO Custom Lumen Output 1 AP AP-Amber Phosphor Converted 27K8 2700K, 80 CRI 3K7 3000K, 70 CRI 3K8 3000K, 80 CRI 35K8 3500K, 80 CRI 3K9 3000K, 90 CRI 4K7 4000K, 70 CRI 4K8 4000K, 80 CRI 4K9 4000K, 90 CRI 5K7 5000K, 70 CRI 5K8 5000K, 80 CRI 2 Type 2 3 Type 3 4F Type 4 Forward 4W Type 4 Wide 5QM Type 5 Square Medium 5QW Type 5 Square Wide L Optic rotation left R Optic rotation right UNV 120- 277V 120 120V 208 208V 240 240V 277 277V 347 347V 480 480V ––– Mounting Color Options Network Control Options A Arm mount for square pole/flat surface A_Arm mount for round pole 2 ASQU Universal arm mount for square pole A_U Universal arm mount for round pole 2 AAU Adjustable arm for pole mounting (universal drill pattern) AA_U Adjustable arm mount for round pole 2 ADU Decorative upswept Arm (universal drill pattern) AD_U Decorative upswept arm mount for round pole 2 MAF Mast arm fitter for 2-3/8" OD horizontal arm K Knuckle T Trunnion WB Wall Bracket, horizontal tenon with MAF WM Wall mount bracket with decorative upswept arm WA Wall mount bracket with adjustable arm BLT Black Matte Textured BLS Black Gloss Smooth DBT Dark Bronze Matte Textured DBS Dark Bronze Gloss Smooth GTT Graphite Matte Textured LGS Light Grey Gloss Smooth LGT Light Grey Gloss Textured PSS Platinum Silver Smooth WHT White Matte Textured WHS White Gloss Smooth VGT Verde Green Textured Color Option CC Custom Color F Fusing 2PF Dual Power Feed 2DR Dual Driver TE Tooless Entry BC Backlight Control TB Terminal Block NXSPW-14F NX Wireless, PIR Occupancy Sensor, Dimming Daylight Harvesting, 14' 1,3,4 NXSPW-40F NX Wireless, PIR Occupancy Sensor, Dimming Daylight Harvesting, 40' 1,3,4 NXSP-14F NX, PIR Occupancy Sensor, Dimming Daylight Harvesting, 14' 3,4 NXSP-40F NX, PIR Occupancy Sensor, Dimming Daylight Harvesting, 40' 3,4 NXWE NX Wireless Enabled (module + radio) 3,4 WIR wiSCAPE® In-Fixture Module 3,4 WIRSC wiSCAPE® Module and Occupancy Sensor 3,4 Stand Alone Sensors BTS-14F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor 4 BTS-40F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor 4 BTSO-12F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor, up to 12' mounting height 4 7PR 7-Pin Receptacle 4 7PR-SC 7-Pin Receptacle with shorting cap 4 3PR 3-Pin twist lock 4 3PR-SC 3-Pin receptacle with shorting cap 4 3PR-TL 3-Pin PCR with photocontrol 4 Programmed Controls ADD AutoDim Timer Based Dimming 4 ADT AutoDim Time of Day Dimming 4 Photocontrols PC Button Photocontrol 4,7 1 – Items with a grey background can be done as a custom order. Contact brand representative for more information 2 – Replace “_” with “2” for 2.5”-3.4” OD pole, “3” for 3.5”-4.13” OD pole, “4” for 4.18”-5.25” OD pole, “5” for 5.5”-6.5” OD pole 3 – Networked Controls cannot be combined with other control options 4 – Not available with 2PF option 5 – Not available with Dual Driver option 6 – Some voltage restrictions may apply when combined with controls 7 – Not available with 480V Example: VP–2–320L-145–3K7–2–R–UNV–A3–BLT Index Page2/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4F-UNV-A3-***- RSSB25-50B-1-B3-*** Notes: Type: S4 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 4/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: Hubbell Control Solutions — Accessories (Sold Separately) NX Distributed Intelligence™ NXOFM- 1R1D-UNV On-fixture Module (7-pin), On / Off / Dim, Daylight Sensor with HubbNET Radio and Bluetooth® Radio, 120–480VAC wiSCAPE® Lighting Control WIR-RME-L On-fixture Module (7-pin or 5-pin), On / Off / Dim, Daylight Sensor with wiSCAPE Radio, 110–480VAC SCP-REMOTE Remote Control for SCP/_F option. Order at least one per project to program and control the occupancy sensor For additional information related to these accessories please visit www.hubbellcontrolsolutions.com. Options provided for use with integrated sensor, please view specification sheet ordering information table for details. ORDERING GUIDE (CONTINUED) CATALOG # –– Accessory Type Size Option SHD Shield MTG Mounting 1 Size 1 2 Size 2 3 Size 3 4 Size 4 HSS-90-B House Side Shield 90º Back HSS-90-F House Side Shield 90º Front HSS-90-S House Side Shield 90º Side HSS-270-BSS House Side Shield 270º Back/Side/Side HSS-270-FSS House Side Shield 270º Front/Side/Side HSS-270-FSB House Side Shield 270º Front/Side/Back HSS-360 House Side Shield 360º BC Back Light Control A Arm Mount for square pole/flat surface ASQU Universal Arm Mount for square pole AAU Adjustable Arm for pole mounting ADU Decorative upswept Arm RPA Round Pole Adapter MAF Mast Arm Fitter for 2-3/8" OD horizontal arm K Knuckle T Trunnion WB Wall Bracket (compatible with universal arm mounts) – Color BLS Black Gloss Smooth BLT Black Matte Textured DBS Dark Bronze Gloss Smooth DBT Dark Bronze Matte Textured GTT Graphite Matte Textured LGS Light Gray Gloss Smooth PSS Platinum Silver Smooth WHS White Gloss Smooth WHT White Matte Textured VGT Green Landscape Decorative LEG Legacy Colors Color Option CC Custom Color CONTROLS ™ Control Option Sensor Networkable Scheduling Occupancy Daylight Harvesting On/Off Control Programming Pair with Sensor Sensor Mounting Height NXWE –✔✔––✔✔–– NXSPW_F NXSM-P ✔✔✔✔✔✔–14ft, 40ft NXSP_F NXSM-P ––✔✔✔––14ft, 40ft BTSO12F BTSMP-OMNI ––✔✔✔Bluetooth –12ft BTS_F BTSMP ––✔✔–––14ft, 40ft ADD ––✔––✔–✔– ADT ––✔––✔–✔– 7PR –Paired with external control Paired with external control –Paired with external control Paired with external control –✔– 7PR-SC –––––––✔– 3PR –––––Paired with external control –✔– 3PR-SC –––––––✔– 3PR-TL ––––✔✔–✔– WIR –✔✔–✔✔Gateway –– WIRSC BTSMP ✔✔✔✔✔Gateway –14ft, 40ft – Accessory Type Option MSC Miscellaneous BIRD SPK Bird Spike Index Page3/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4F-UNV-A3-***- RSSB25-50B-1-B3-*** Notes: Type: S4 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 5/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DELIVERED LUMENS DATE:LOCATION: TYPE:PROJECT: CATALOG #: PROJECTED LUMEN MAINTENANCE Ambient Temp.0 25,000 *TM-21-11 36,000 50,000 100,000 Calculated L70 (Hours) 25°C / 77°F 1.00 0.97 0.96 0.95 0.91 408,000 40°C / 104°F 0.99 0.96 0.95 0.94 0.89 356,000 LUMINAIRE AMBIENT TEMPERATURE FACTOR (LATF) Ambient Temperature Lumen Multiplier 0°C 32°F 1.03 10°C 50°F 1.01 20°C 68°F 1.00 25°C 77°F 1.00 30°C 86°F 0.99 40°C 104°F 0.98 50°C 122°F 0.97 For delivered lumens, please see Lumens Data PDF on www.hubbelllighting.com Micro Strike Lumen Multiplier CCT 70 CRI 80 CRI 90 CRI 2700K –0.841 – 3000K 0.977 0.861 0.647 3500K –0.900 – 4000K 1 0.926 0.699 5000K 1 0.937 0.791 Monochromatic Amber Multiplier Amber 0.250 Strike Lumen Multiplier CCT 70 CRI 80 CRI 90 CRI 2700K –0.859 – 3000K 0.941 0.912 0.703 3500K –0.906 – 4000K 1 0.894 0.734 5000K 1 0.879 0.711 Monochromatic Amber Multiplier Amber 0.255 Index Page4/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4F-UNV-A3-***- RSSB25-50B-1-B3-*** Notes: Type: S4 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 6/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com ELECTRICAL DATA: MICRO STRIKE DATE:LOCATION: TYPE:PROJECT: CATALOG #: # OF LEDS 160 NOMINAL WATTAGE 35 50 75 100 115 135 160 SYSTEM POWER (W)34.9 50.5 72.1 97.2 111.9 132.2 157.8 INPUT VOLTAGE (V)CURRENT (Amps) 120 0.29 0.42 0.63 0.83 0.96 1.13 1.33 208 0.17 0.24 0.36 0.48 0.55 0.65 0.77 240 0.15 0.21 0.31 0.42 0.48 0.56 0.67 277 0.13 0.18 0.27 0.36 0.42 0.49 0.58 347 0.10 0.14 0.22 0.29 0.33 0.39 0.46 480 0.07 0.10 0.16 0.21 0.24 0.28 0.33 # OF LEDS 320 NOMINAL WATTAGE 145 170 185 210 235 255 315 SYSTEM POWER (W)150 166.8 185.7 216.2 240.9 261.5 312 INPUT VOLTAGE (V)CURRENT (Amps) 120 1.21 1.42 1.54 1.75 1.96 2.13 2.63 208 0.70 0.82 0.89 1.01 1.13 1.23 1.51 240 0.60 0.71 0.77 0.88 0.98 1.06 1.31 277 0.52 0.61 0.67 0.76 0.85 0.92 1.14 347 0.42 0.49 0.53 0.61 0.68 0.73 0.91 480 0.30 0.35 0.39 0.44 0.49 0.53 0.66 # OF LEDS 480 NOMINAL WATTAGE 285 320 340 390 425 470 SYSTEM POWER (W)286.2 316.7 338.4 392.2 423.2 468 INPUT VOLTAGE (V)CURRENT (Amps) 120 2.38 2.67 2.83 3.25 3.54 3.92 208 1.37 1.54 1.63 1.88 2.04 2.26 240 1.19 1.33 1.42 1.63 1.77 1.96 277 1.03 1.16 1.23 1.41 1.53 1.70 347 0.82 0.92 0.98 1.12 1.22 1.35 480 0.59 0.67 0.71 0.81 0.89 0.98 # OF LEDS 720 NOMINAL WATTAGE 435 475 515 565 600 SYSTEM POWER (W)429.3 475 519.1 565.2 599.9 INPUT VOLTAGE (V)CURRENT (Amps) 120 3.63 3.96 4.29 4.71 5.00 208 2.09 2.28 2.48 2.72 2.88 240 1.81 1.98 2.15 2.35 2.50 277 1.57 1.71 1.86 2.04 2.17 347 1.25 1.37 1.48 1.63 1.73 480 0.91 0.99 1.07 1.18 1.25 Index Page5/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4F-UNV-A3-***- RSSB25-50B-1-B3-*** Notes: Type: S4 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 7/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: ELECTRICAL DATA: STRIKE CATALOG #: # OF LEDS 36 NOMINAL WATTAGE 39 55 85 105 115 SYSTEM POWER (W)39.6 56.8 83.6 108.2 113.7 INPUT VOLTAGE (V)CURRENT (Amps) 120 0.33 0.46 0.71 0.88 1.00 208 0.19 0.26 0.41 0.50 0.58 240 0.16 0.23 0.35 0.44 0.50 277 0.14 0.20 0.31 0.38 0.43 347 0.11 0.16 0.24 0.30 0.35 480 0.08 0.11 0.18 0.22 0.25 # OF LEDS 72 NOMINAL WATTAGE 120 145 180 210 215 SYSTEM POWER (W)120.9 143.2 179.4 210.2 214.8 INPUT VOLTAGE (V)CURRENT (Amps) 120 0.96 1.21 1.50 1.75 2.00 208 0.55 0.70 0.87 1.01 1.15 240 0.48 0.60 0.75 0.88 1.00 277 0.42 0.52 0.65 0.76 0.87 347 0.33 0.42 0.52 0.61 0.69 480 0.24 0.30 0.38 0.44 0.50 # OF LEDS 108 NOMINAL WATTAGE 240 250 280 320 325 SYSTEM POWER (W)241.7 250.8 278.3 322.1 324.7 INPUT VOLTAGE (V)CURRENT (Amps) 120 1.79 2.08 2.33 2.71 3.04 208 1.03 1.20 1.35 1.56 1.75 240 0.90 1.04 1.17 1.35 1.52 277 0.78 0.90 1.01 1.17 1.32 347 0.62 0.72 0.81 0.94 1.05 480 0.45 0.52 0.58 0.68 0.76 # OF LEDS 162 NOMINAL WATTAGE 365 405 445 485 545 SYSTEM POWER (W)362.6 403.6 445.1 487.1 543.9 INPUT VOLTAGE (V)CURRENT (Amps) 120 2.67 3.38 3.71 4.04 4.54 208 1.54 1.95 2.14 2.33 2.62 240 1.33 1.69 1.85 2.02 2.27 277 1.16 1.46 1.61 1.75 1.97 347 0.92 1.17 1.28 1.40 1.57 480 0.67 0.84 0.93 1.01 1.14 Index Page6/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4F-UNV-A3-***- RSSB25-50B-1-B3-*** Notes: Type: S4 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 8/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: MICRO STRIKE PHOTOMETRY The following diagrams represent the general distribution options offered for this product. For detailed information on specific product configurations, see website photometric test reports. Type 2Type 2 Type 4F Type 4WType 4 Wide Type 5QMType 4F Type 5QMType 5QM Type 5QW Type 3Type 3 Index Page7/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4F-UNV-A3-***- RSSB25-50B-1-B3-*** Notes: Type: S4 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 9/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: OPTIC STRIKE PHOTOMETRY The following diagrams represent the general distribution options offered for this product. For detailed information on specific product configurations, see website photometric test reports. Type FR - Front Row/Auto OpticType FR – Front Row/Auto Optic Type 4Type 4 Forward Type 2Type 2 Type 4 WideType 4 Wide Type 5R (rectangular)Type 5R (rectangular) Type CornerType Corner Type 3Type 3 Type 5QMType 5QM Type 5W (round wide)Type 5W (round wide)Type TC (tennis court)Type TC Index Page8/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4F-UNV-A3-***- RSSB25-50B-1-B3-*** Notes: Type: S4 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 10/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: DIMENSIONS EPA VP1 (Size 1)VP2 (Size 2)VP3 (Size 3)VP4 (Size 4)Config. Single Fixture 0.454 0.555 0.655 0.698 Two at 180 0.908 1.110 1.310 1.396 Two at 90 0.583 0.711 0.857 0.948 Three at 90 1.037 1.266 1.512 1.646 Three at 120 0.943 1.155 1.392 1.680 Four at 90 1.166 1.422 1.714 1.896 Weight lbs kgs VP1 (Size 1)13.7 6.2 VP2 (Size 2)16.0 7.26 VP3 (Size 3)25.9 11.7 VP4 (Size 4)30.8 13.9 XX XX/XX/XX ECO-XXXX XXX XXX 12765432 D C B A 1276543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 11 SHTS Error: No reference Error: No reference * * * VP1-ASQ.dftjdietrich09/24/21 XXX 05/19/05 XXX 05/19/05 PV:1 14.373 5.000 16.756 21.756 3.477 SIZE 1 SIZE 3 SIZE 2 SIZE 4 5.00 16.76 14.37 21.76 3.48 XX XX/XX/XX ECO-XXXX XXX D C B A 128765432 12876543 This document contains confidential and proprietary information Lighting. Receipt or possession of this document does not conv rights to reproduce or disclose its contents, or to make, use , or anything it may disclose. Reproduction, disclosure, or use of the or its contents, without the specific written authorization of Hubb Lighting, may violate the intellectual property rights of Hubbell L UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. DESNRECORDDATEREV SHT 12 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 5.000 21.877 14.373 26.876 3.477 5.00 21.88 14.37 26.88 3.48 XX XX/XX/XX ECO-XXXX XXX XXX 12765432 D C B A 1276543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 11 SHTS Error: No reference Error: No reference * * * VP3-ASQ.dftjdietrich09/24/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.500 16.113 34.476 3.477 26.976 XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 11 SHTS Error: No reference Error: No reference * * * VP4-ASQ.dftjdietrich09/24/21 XXX 05/19/05 XXX 05/19/05 PV:1 19.622 7.500 27.980 35.476 3.477 7.50 7.50 3.48 3.48 26.97 34.47 27.98 19.62 35.48 Index Page9/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4F-UNV-A3-***- RSSB25-50B-1-B3-*** Notes: Type: S4 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 11/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: MOUNTING ASQ–STRAIGHT ARM MOUNT Fixture ships with integral arm for ease of installation. Compatible with Hubbell Outdoor B3 drill pattern. For round poles add applicable suffix (2/3/4/5) ASQU–UNIVERSAL ARM MOUNT Universal mounting block for ease of installation. Compatible with drill patterns from 2.5" to 4.5" and Hubbell drill pattern S2. For round poles add applicable suffix (2/3/4/5) AAU–ADJUSTABLE ARM FOR POLE MOUNTING Rotatable arm mounts directly to pole. Compatible with drill patterns from 2.5" to 4.5" and Hubbell drill pattern S2. For round poles add applicable suffix (2/3/4/5). Rotatable in 15˚ aiming angle increments. Micro Strike configurations have a 45° aiming limitation. Strike configurations have a 30° aiming limitation. ADU–DECORATIVE UPSWEPT ARM Upswept Arm compatible with drill patterns from 2.5" to 4.5". For round poles add applicable suffix (2/3/4/5). MAF–MAST ARM FITTER Fits 2-3/8" OD horizontal tenons. K–KNUCKLE Knuckle mount 15˚ aiming angle increments for precise aiming and control, fits 2-3/8" tenons or pipes. Micro Strike configurations have a 45° aiming limitation. Strike configurations have a 30° aiming limitation. T–TRUNNION Trunnion for surface and crossarm mounting using (1) 3/4" or (2) 1/2" size through bolts. Micro Strike configurations have a 45° aiming limitation. Strike configurations have a 30° aiming limitation. XX XX/XX/XX ECO-XXXX XXX XXX 12765432 D C B A 1276543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 D C B A 8 7 6 5 4 8 7 6 5 4 7.762 7.500 7.500 9.300 7.731 D C B A 8 7 6 5 4 3 8 7 6 5 4 3 UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE CRITICAL DIMENSIONS THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO: jdietrich 09/16 XXX 05/19 XXX 05/19 7.762 7.500 7.500 9.300 7.731 XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 8.3" 7.5 " 7.5 " 5.0" 7.8 " XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 7.7 " WM–WALL MOUNT Compatible with universal arm mount, adjustable arm mount, and decorative arm mount. The WA option uses the same wall bracket but replaces the decorative arm with an adjustable arm. XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 9.3" XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 11 SHTS Error: No reference Error: No reference * * * VP1-ASQ.dftjdietrich09/24/21 XXX 05/19/05 XXX 05/19/05 PV:1 14.373 5.000 16.756 21.756 3.477 5.0" Index Page10/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4F-UNV-A3-***- RSSB25-50B-1-B3-*** Notes: Type: S4 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 12/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: ADDITIONAL INFORMATION (CONTINUED) HOUSE SIDE SHIELD FIELD INSTALL ACCESSORIES Instruction Sheet: 93158127_P1Hubbell Lighting701 Millennium Blvd.Greenville, SC 29607 Technical Support: (864) 678-1000Fax: (864) 898-1065www.hubbell.com VPR2x HSS-90-B-xx VPR2x HSS-90-S-xx VPR2x HSS-90-S-xx VPR2x HSS-270-BSS-xx VPR2x HSS-270-FSS-xx VPR2x HSS-270-FSB-xx VPR2x HSS-270-FSB-xx VPR2x HSS-360-xx VPR2x HSS-90-F-xx VPR2 HOUSE SIDE SHIELD ACCESSORY NOMENCLATURE:"x" denotes size 1, 2, 3, or 4"xx" denotes color selection (DBT, GTT,WHT, etc.) Index Page11/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4F-UNV-A3-***- RSSB25-50B-1-B3-*** Notes: Type: S4 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 13/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: ADDITIONAL INFORMATION (CONTINUED) PROGRAMMED CONTROLS ADD-AutoDim Timer Based Options • Light delay options from 1-9 hours after the light is turned on to dim the light by 10-100%. To return the luminaire to its original light level there are dim return options from 1-9 hours after the light has been dimmed previously. EX: ADD-6-5-R6 ADT-AutoDim Time of Day Based Option • Light delay options from 1AM-9PM after the light is turned on to dim the light by 10-100%. To return the luminaire to its original light level there are dim return options from 1AM-9PM after the light has been dimmed previously. EX: ADT-6-5-R6 ADD Control Options Configurations Choices Example Choice Picked Auto-Dim Options 1-9 Hours 6 - Delay 6 hours Auto-Dim Brightness 10-100% Brightness 5 - Dim to 50% brightness Auto-Dim Return Delay 0-9 Hours R6 - Return to full output after 6 hours ADD Control Options Configurations Choices Example Choice Picked Auto-Dim Options 12-3 AM and 6-11 PM 6 - Dim at 6PM Auto-Dim Brightness 10-100% Brightness 5 - Dim to 50% Auto-Dim Return 12-6 AM and 9-11P R6 - Return to full output at 6AM USE OF TRADEMARKS AND TRADE NAMES All product and company names, logos and product identifies are trademarks ™ or registered trademarks ® of Hubbell Lighting, Inc. or their respective owners. Use of them does not necessarily imply any affiliation with or endorsement by such respective owners. Index Page12/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4F-UNV-A3-***- RSSB25-50B-1-B3-*** Notes: Type: S4 INDY22-104626 Beacon Products • 701 Millennium Blvd, Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2020 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA RSS-B POLES-SPEC JuLy 28, 2020 8:45 AM APPLICATIONS • Lighting installations for side and top mounting of luminaires with effective projected area (EPA) not exceeding maximum allowable loading of the specified pole in its installed geographic location CONSTRUCTION • SHAFT: One-piece straight steel with round cross section, Minimum yield of 46,000 psi (ASTM-A500, Grade C); Longitudinal weld seam to appear flush in shaft wall; Steel base plate with axial bolt circle slots welded flush to pole shaft having minimum yield of 36,000 psi (ASTM A36) • BASE COVER: Two-piece square aluminum base cover included standard • POLE CAP: Pole shaft supplied with removable cover when applicable; Tenon and post-top configurations also available • HAND HOLE: Rectangular 3x5 steel hand hole frame (2.38” x 4.38” opening); Mounting provisions for grounding lug located behind gasketed cover • ANCHOR BOLTS: Four galvanized anchor bolts provided per pole with minimum yield of 55,000 psi (ASTM F1554). Galvanized hardware with two washers and two nuts per bolt for leveling FINISH • Durable thermoset polyester powder coat paint finish with nominal 3.0 mil thickness • Powder paint prime applied over “white metal” steel substrate cleaned via mechanical shot blast method • Decorative finish coat available in multiple standard colors; Custom colors available; RAL number preferable; RSS-B SERIES POLES ROUND STRAIGHT STEEL Overall Height 10' - 30' Handhole 18" Cat.# Approvals Job Type BASE DETAILPOLE CAP TENON BASE COVER Bolt Circle (Outer) Bolt Circle (Inner) Bolt Square (Outer) Bolt Square (Inner) 270˚90˚ 180˚ 0˚ Handhole ORDERING INFORMATION SERIES RSS-B Round Straight Steel Pole Beacon RSS B 25 40 A/B/C 2L BLTB2 UL MOUNTING ORIENTATION MOUNTING 1 Single arm mount 2 Two fixtures at 180˚ 2L Two fixtures at 90˚ 3T Three fixtures at 90˚ 3Y Three fixtures at 120˚ 4 Four fixtures at 90˚ TA Tenon (2.375” OD) TB Tenon (2.875” OD) TC Tenon (3.5” OD) OT No drilling (includes pole cap) HEIGHT Reference page 2 Ordering matrix SHAFT Reference page 2 Ordering matrix THICKNESS Reference page 2 Ordering matrix OPTIONS GFI1 20 Amp GFCI Receptacle and Cover EHH1 Extra Handhole C051 .5” Coupling C071 .75” Coupling C201 2” Coupling MPB1 Mid-pole Luminaire Bracket VM2 2nd mode vibration damper LAB Less Anchor Bolts UL UL Certified RBC Round Base Cover ORDERING EXAMPLE: Reference page 2 for available configurations ACCESSORIES- Order Separately Catalog Number Description VM2SXX 2nd mode vibration damper 1 Specify option location using logic found on page 2 (Option Orientation) DRILL PATTERN B1 Cruzer, “AM” arm B3 2 bolt (2-1/2” spacing), Viper “A” arm S2 2 bolt (3-1/2” spacing), Viper “AD” arm FINISH BLT Black Matte Textured BLS Black Gloss Smooth DBT Dark Bronze Matte Textured DBS Dark Bronze Gloss Smooth GTT Graphite Matte Textured LGS Light Grey Gloss Smooth PSS Platinum Silver Smooth WHT White Matte Textured WHS White Gloss Smooth VGT Verde Green Textured Color Option CC Custom Color 22 50 Index Page13/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4F-UNV-A3-***- RSSB25-50B-1-B3-*** Notes: Type: S4 INDY22-104626 Beacon Products • 701 Millennium Blvd, Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2020 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA RSS-B POLES-SPEC JuLy 28, 2020 8:45 AM Overall Height 10'-30' 18" TENON Bolt Circle (Outer) Bolt Circle (Inner) Bolt Square (Outer) Bolt Square (Inner) Height of option in feet BASE COVER 270˚90˚ 180˚ 0˚ Handhole VIBRATION DAMPER 2ND MODE ORDERING INFORMATION Cont. NOTE Factory supplied template must be used when setting anchor bolts. Beacon Products will deny any claim for incorrect anchorage placement resulting from failure to use factory supplied template and anchor bolts. For more information about pole vibration and vibration dampers, please consult http://cdn.beaconproducts.com/content/products/literature/literature_files/Pole_Wind_Induced_Flyer_HLOI0022.pdf Due to our continued efforts to improve our products, product specifications are subject to change without notice. Follow the logic below when ordering location specific options. For each option, include its orientation (in degrees) and its height (in feet). Example: Option C07 should be ordered as: RSS-B-20-40-A-TA-DB-CO5-0-15 (.5” coupling on the handhole/arm side of pole, 15 feet up from the pole base) 1’ spacing required between option. Consult factory for other configurations. OPTION ORIENTATIONGFI – 20 AMP GFCI RECEPTACLE & COVER EHH - EXTRAHANDHOLE C05 - C07 - C20 -COUPLING MPB - MID POLE BRACKET VM2 - VIBRATION DAMPER 2ND MODE VM2SXX - VIBRATION DAMPER 2ND MODE Anchor Base Detail Bolt Circle Bolt Slots/Holes 0°-HandholeBolt Square 270°Arm 1 90° Arm 2 180° As viewed from top of pole. Bolt Circle Bolt Slots/Holes 0°-HandholeBolt Square 270°Arm 1 90° Arm 2 180° As viewed from top of pole. Provision for Grounding 1/2” - 14 NPSC Threads 3/4” - 14 NPSC Threads 2” -11.5 NPSC Threads Round Steel Pole Attachment stub 5” long welded to pole Arm, 3” Sq. x 13.5” long ships separately 2” pipe tenon 4.25” tall Round Steel Pole Standard hand hole frame Adapter plate Gasket 20 AMP GFCI Wet Locations In-use Cover Overall Height 10'-30' 18" TENON Bolt Circle (Outer) Bolt Circle (Inner) Bolt Square (Outer) Bolt Square (Inner) BASE COVER 270˚90˚ 180˚ 0˚ Handhole Factory installed, internal damper designed to alter pole resonance to reduce movement and material fatigue caused by 2nd mode vibration. Field installed, internal damper designed to alter pole resonance to reduce movement and material fatigue caused by 2nd mode vibration. VM2S08 – 8' VM2S12 – 12' VM2S16 – 16' VM2S20 – 20' VM2S24 – 24' Catalog Number Height Nominal Shaft Dimensions Wall Thickness Bolt Circle (suggested) Bolt Circle (range) Bolt Square (range) Base Plate Square Base Plate Thickness Anchor bolt size Bolt Projection Pole weightFeetMeters RSS-B-10-40-A 10 3.0 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 52 RSS-B-12-40-A 12 3.7 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 62 RSS-B-14-40-A 14 4.3 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 72 RSS-B-16-40-A 16 4.9 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 83 RSS-B-18-40-A 18 5.5 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 93 RSS-B-20-40-A 20 6.1 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 103 RSS-B-10-40-B 10 3.0 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 77 RSS-B-12-40-B 12 3.7 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 92 RSS-B-14-40-B 14 4.3 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 107 RSS-B-16-40-B 16 4.9 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 122 RSS-B-18-40-B 18 5.5 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 138 RSS-B-20-40-B 20 6.1 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 153 RSS-B-10-50-B 10 3.0 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 97 RSS-B-12-50-B 12 3.7 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 116 RSS-B-14-50-B 14 4.3 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 135 RSS-B-16-50-B 16 4.9 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 155 RSS-B-18-50-B 18 5.5 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 174 RSS-B-20-50-B 20 6.1 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 193 RSS-B-25-50-B 25 7.6 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 242 RSS-B-20-60-C 20 6.1 6" round 0.250"11"9.0" - 11"6.36" - 7.78"10.25 1.0 1" x 36" x 4"4.5 307 RSS-B-25-60-C 25 7.6 6" round 0.250"11"9.0" - 11"6.36" - 7.78"10.25 1.0 1" x 36" x 4"4.5 384 RSS-B-30-60-C 30 9.1 6" round 0.250"11"9.0" - 11"6.36" - 7.78"10.25 1.0 1" x 36" x 4"4.5 461 VIBRATION DAMPER 2ND MODE Index Page14/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4F-UNV-A3-***- RSSB25-50B-1-B3-*** Notes: Type: S4 INDY22-104626 Beacon Products • 701 Millennium Blvd, Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2020 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA RSS-B POLES-SPEC JuLy 28, 2020 8:45 AM ASCE7-05 WIND MAP FLORIDA REGION WIND MAP 180 180 170 170 160 160 150 150 140 140140150 140 150 130 120 115 115 120 130 • Florida region wind map above is based upon 3-second gust winds and the 2017 Florida Building Code HAWAII – 105 mph PUERTO RICO – 145 mph NOTES: • Values are based on 50 year mean recurrence interval 30’ above grade. • Hawaii has an 105 mph wind velocity. • Puerto Rico has a 125 mph wind velocity. • Caution must be exercised in determining wind velocities in special wind areas such as: Mountainous Regions Areas surrounding the Great Lakes or other large bodies of water or open land. Areas subject to extreme wind conditions, such as hurricanes, typhoons, cyclones, and tornadoes. Areas adjacent to airports. Any specific area with a known or suspected abnormally high intermittent wind condition caused by geography, adjacent structures, or other specific local conditions that may not be recorded in National Weather Service records. • Allowable pole EPA for jobsite wind conditions must be equal to or greater than fixture EPA. Responsibility lies with the specifier for correct pole selection based on AASHTO wind map and job location. • The Wind Map is intended only as a general guide. Always consult local authorities to determine maximum wind velocities, gusting and unique wind conditions for each specific application. • CAUTION: Wind speeds and listed EPAs are for ground mounted installations. Poles mounted on structures (such as bridges and buildings) must consider vibration and coefficient of height factors beyond this general guide. Consult AASHTO standards. • Extreme Wind Events: Hurricanes, Typhoons, Cyclones, or Tornadoes expose poles to flying debris, wind shear, and other unpredictable aerodynamic forces not indicated by the wind velocity ratings. • Pole Strength Limited Warranty: Standard, unmodified Kim lighting Poles installed as recommended, undamaged by corrosion, or lack of maintenance, shall withstand steady wind conditions as provided on page 2 (Allowable Pole EPA). Installation of poles without luminaires, or attachment of any unauthorized accessories to poles shall void this warranty. 85 90 90100110 120 130 130 140 140 140 150 150 14013012011010090 Special Wind Region(Consult Local Authorities) 90 Wind Map United States and Canada Florida Building Code 2017 EPA Load Rating - 3 second gust wind speeds Catalog Number 115 120 130 140 150 160 170 180 RSS-B-10-40-A 25.0 23..5 20.0 17.0 14.5 12.5 11.0 10.0 RSS-B-12-40-A 21.0 19.0 16.0 13.5 11.5 9.5 9.0 8.0 RSS-B-14-40-A 17.5 15.7 13.0 10.8 9.0 7.5 7.0 6.5 RSS-B-16-40-A 14.2 13.0 10.5 8.5 7.0 5.8 5.0 4.5 RSS-B-18-40-A 11.6 10.4 8.2 6.8 5.4 4.4 4.0 3.6 RSS-B-20-40-A 9.5 8.4 6.5 5.2 4.0 3.0 2.8 2.5 RSS-B-10-40-B 25.0 25.0 25.0 22.0 19.0 16.5 15.2 13.4 RSS-B-12-40-B 25.0 25.0 20.8 17.6 15.1 13.0 12.0 10.6 RSS-B-14-40-B 22.5 20.4 17.2 14.4 12.2 10.4 10.0 8.8 RSS-B-16-40-B 18.9 17.0 14.1 11.7 9.8 8.2 7.5 7.0 RSS-B-18-40-B 15.6 14.1 11.5 9.4 7.7 6.4 6.0 5.7 RSS-B-20-40-B 13.0 11.6 9.3 7.5 6.0 4.8 4.0 3.5 RSS-B-10-50-B 25.0 25.0 25.0 25.0 25.0 23.6 20.8 18.4 RSS-B-12-50-B 25.0 25.0 25.0 25.0 22.2 19.3 16.8 14.8 RSS-B-14-50-B 25.0 25.0 23.9 21.5 18.4 15.9 13.8 12.1 RSS-B-16-50-B 25.0 23.8 19.6 18.0 15.4 13.2 11.4 9.9 RSS-B-18-50-B 21.8 19.6 16.1 15.1 12.8 10.8 9.3 8.0 RSS-B-20-50-B 18.2 16.4 14.1 12.7 10.7 9.0 7.7 6.5 RSS-B-25-50-B 11.7 10.2 9.4 8.4 6.8 5.6 4.5 3.7 RSS-B-20-60-C 25.0 25.0 25.0 22.1 18.8 16.1 13.9 12.0 RSS-B-25-60-C 24.7 22.4 18.4 15.3 12.8 10.8 9.1 7.6 RSS-B-30-60-C 18.2 16.3 13.2 10.7 8.7 7.0 5.7 4.5 ASCE 7-05 wind map EPA Load Rating - 3 second gust wind speeds Catalog Number 85 90 100 110 120 105 145 RSS-B-10-40-A 21.0 18.7 15.0 12.2 10.1 13.5 6.8 RSS-B-12-40-A 16.8 14.8 11.8 9.5 7.7 10.5 5.1 RSS-B-14-40-A 13.6 12.0 9.4 7.4 5.9 8.3 3.9 RSS-B-16-40-A 11.1 9.7 7.5 5.8 4.5 6.6 2.9 RSS-B-18-40-A 9.0 7.8 5.8 4.4 3.3 5.1 2 RSS-B-20-40-A 7.2 6.2 4.5 3.1 2.2 3.8 1.2 RSS-B-10-40-B 25.0 25.0 22.4 18.4 15.3 20.2 10.4 RSS-B-12-40-B 25.0 22.3 17.9 14.5 12.0 16.1 8.1 RSS-B-14-40-B 20.6 18.3 14.6 11.7 9.6 13 6.4 RSS-B-16-40-B 17.2 15.2 12.0 9.5 7.7 10.7 5.1 RSS-B-18-40-B 14.3 12.6 9.8 7.6 6.1 8.6 3.9 RSS-B-20-40-B 11.8 10.3 7.9 6.0 4.7 6.9 2.9 RSS-B-10-50-B 25.0 25.0 25.0 25.0 25.0 25.0 17.7 RSS-B-12-50-B 25.0 25.0 25.0 24.8 20.8 25.0 14.3 RSS-B-14-50-B 25.0 25.0 24.7 20.5 17.2 22.4 11.7 RSS-B-16-50-B 25.0 25.0 20.7 17.1 14.3 18.8 9.7 RSS-B-18-50-B 24.5 21.6 17.3 14.3 11.9 15.7 8.0 RSS-B-20-50-B 20.6 18.1 14.4 11.8 9.8 13.0 6.5 RSS-B-25-50-B 13.6 11.7 9.1 7.3 6.0 8.1 3.8 RSS-B-20-60-C 25.0 25.0 25.0 25.0 21.5 25.0 14.8 RSS-B-25-60-C 25.0 25.0 21.9 18.0 15.0 19.8 10.1 RSS-B-30-60-C 21.8 19.4 15.6 12.7 10.6 14.1 6.9 120 110 100 90 90 100 110 120 130 130 130 130 ALASKA REGION WIND MAP *PRINTED WITH PERMISSION FROM ASCE Index Page15/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4F-UNV-A3-***- RSSB25-50B-1-B3-*** Notes: Type: S4 INDY22-104626 Beacon Products • 701 Millennium Blvd, Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2020 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA RSS-B POLES-SPEC JuLy 28, 2020 8:45 AM • Allowable EPA, to determine max pole loading weight, multiply allowable EPA by 30 lbs. • The tables for allowable pole EPA are based on the ASCE 7-05 Wind Map or the Florida Region Wind Map for the 2010 Florida Building Code. The Wind Maps are intended only as a general guide and cannot be used in conjunction with other maps. Always consult local authorities to determine maximum wind velocities, gusting and unique wind conditions for each specific application • Allowable pole EPA for jobsite wind conditions must be equal to or greater than the total EPA for fixtures, arms, and accessories to be assembled to the pole. Responsibility lies with the specifier for correct pole selection. Installation of poles without luminaires or attachment of any unauthorized accessories to poles is discouraged and shall void the manufacturer’s warranty • Wind speeds and listed EPAs are for ground mounted installations. Poles mounted on structures (such as bridges and buildings) must consider vibration and coefficient of height factors beyond this general guide; Consult local and federal standards • Wind Induced Vibration brought on by steady, unidirectional winds and other unpredictable aerodynamic forces are not included in wind velocity ratings. Consult Hubbell Lighting’s Pole Vibration Application Guide for environmental risk factors and design considerations. http://cdn.beaconproducts.com/content/products/literature/literature_files/Pole_Wind_Induced_Flyer_HLOI0022.pdf • Extreme Wind Events like, Hurricanes, Typhoons, Cyclones, or Tornadoes may expose poles to flying debris, wind shear or other detrimental effects not included in wind velocity ratings Due to our continued efforts to improve our products, product specifications are subject to change without notice. Wind-speed Website disclaimer: Hubbell Lighting has no connection to the linked website and makes no representations as to its accuracy. While the information presented on this third-party website provides a useful starting point for analyzing wind conditions, Hubbell Lighting has not verified any of the information on this third party website and assumes no responsibility or liability for its accuracy. The material presented in the windspeed website should not be used or relied upon for any specific application without competent examination and verification of its accuracy, suitability and applicability by engineers or other licensed professionals. Hubbell Lighting Inc. does not intend that the use of this information replace the sound judgment of such competent professionals, having experience and knowledge in the field of practice, nor to substitute for the standard of care required of such professionals in interpreting and applying the results of the windspeed report provided by this website. Users of the information from this third party website assume all liability arising from such use. Use of the output of these referenced websites do not imply approval by the governing building code bodies responsible for building code approval and interpretation for the building site described by latitude/longitude location in the windspeed report. http://windspeed.atcouncil.org NOTES Index Page16/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4W-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S4-BL INDY22-104626 Page 1/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: KEY DATA Lumen Range 5,000–80,000 Wattage Range 36–600 Efficacy Range (LPW)92–155 Weight lbs. (kg)13.7-30.9 (6.2-13.9) CATALOG #: FEATURES • Low profile LED area/site luminaire with a variety of IES distributions for lighting applications such as auto dealership, retail, commercial, and campus parking lots • Featuring two different optical technologies, Strike and Micro Strike Optics, which provide the best distribution patterns for retrofit or new construction • Rated for high vibration applications including bridges and overpasses. All sizes are rated for 1.5G • Control options including photo control, occupancy sensing, NX Distributed Intelligence™, wiSCAPE and 7-Pin with networked controls • New customizable lumen output feature allows for the wattage and lumen output to be customized in the factory to meet whatever specification requirements may entail • Field interchangeable mounting provides additional flexibility after the fixture has shipped CONTROL TECHNOLOGY ™ See Certiﬁcation Speciﬁcations BUY AMERICANSOLUTIONS See Certiﬁcation Speciﬁcations BUY AMERICANSOLUTIONSIP65 VIPER Area/Site VIPER LUMINAIRE CONSTRUCTION • Die-cast housing with hidden vertical heat fins are optimal for heat dissipation while keeping a clean smooth outer surface • Corrosion resistant, die-cast aluminum housing with 1000 hour powder coat paint finish • External hardware is corrosion resistant OPTICS • Micro Strike Optics (160, 320, 480, or 720 LED counts) maximize uniformity in applications and come standard with mid- power LEDs which evenly illuminate the entire luminous surface area to provide a low glare appearance. Catalog logic found on page 2 • Strike Optics (36, 72, 108, or 162 LED counts) provide best in class distributions and maximum pole spacing in new applications with high powered LEDs. Strike optics are held in place with a polycarbonate bezel to mimic the appearance of the Micro Strike Optics so both solutions can be combined on the same application. Catalog logic found on page 3 • Both optics maximize target zone illumination with minimal losses at the house-side, reducing light trespass issues. Additional backlight control shields and house side shields can be added for further reduction of illumination behind the pole • One-piece silicone gasket ensures a weatherproof seal • Zero up-light at 0 degrees of tilt • Field rotatable optics INSTALLATION • Mounting patterns for each arm can be found on page 11 • Optional universal mounting block for ease of installation during retrofit applications. Available as an option (ASQU) or accessory for square and round poles. • All mounting hardware included CONTROLS (CONTINUED) • NX Distributed Intelligence™ available with in fixture wireless control module, features dimming and occupancy sensor • wiSCAPE® available with in fixture wireless control module, features dimming and occupancy sensor. Also available in 7-pin configuration CERTIFICATIONS• Meets the qualifications for DLC Premium • Listed to UL1598 and CSA C22.2#250.0-24 for wet locations and 40˚C ambient temperatures • 1.5 G rated for ANSI C136.31 high vibration applications • Fixture is IP65 rated • Meets IDA recommendations using 3K CCT configuration at 0 degrees of tilt • This product qualifies as a “designated country construction material” per FAR 52.225-11 Buy American-Construction Materials under Trade Agreements effective 04/23/2020. See Buy American Solutions. WARRANTY• 5 year warranty • See HLI Commercial and Industrial Outdoor Lighting Warranty for additional information SPECIFICATIONS INSTALLATION (CONTINUED) • Knuckle arm fitter option available for 2-3/8” OD tenon • For products with EPA less than 1 mounted to a pole greater that 20ft, a vibration damper is recommended ELECTRICAL • Universal 120-277 VAC or 347-480 VAC input voltage, 50/60 Hz • Ambient operating temperature -40˚C to 40˚C • Drivers have greater than 90% power factor and less than 20% THD • LED drivers have output power over-voltage, over-current protection and short circuit protection with auto recovery • Field replaceable surge protection device provides 20kA protection meeting ANSI/ IEEE C62.41.2 Category C High and Surge Location Category C3; Automatically takes fixture off-line for protection when device is compromised CONTROLS • Photo control, occupancy sensor programmable controls, and Zigbee wireless controls available for complete on/off and dimming control • Please consult brand or sales representative when combining control and electrical options as some combinations may not operate as anticipated depending on your application • 7-pin ANSI C136.41-2013 photocontrol receptacle option available for twist lock photocontrols or wireless control modules (control accessories sold separately) • 0- 10V Dimming Drivers are standard and dimming leads are extended out of the luminaire unless control options require connection to the dimming leads. Must specify if wiring leads are to be greater than the 6” standard OPTICS Index Page1/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4W-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S4-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 2/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com MICROSTRIKE OPTICS – ORDERING GUIDE CATALOG # DATE:LOCATION: TYPE:PROJECT: CATALOG #: VP –––––––– Series Optic Platform Size Light Engine CCT/CRI Distribution Optic Rotation Voltage VP Viper Micro Strike 1 Size 1 2 Size 2 3 Size 3 4 Size 4 160L-35 6 5500 lumens 160L-50 6 7500 lumens 160L-75 10000 lumens 160L-100 12500 lumens 160L-115 15000 lumens 160L-135 18000 lumens 160L-160 21000 lumens 320L-145 21000 lumens 320L-170 24000 lumens 320L-185 27000 lumens 320L-210 30000 lumens 320L-235 33000 lumens 320L-255 36000 lumens 320L-315 6 40000 lumens 480L-285 40000 lumens 480L-320 44000 lumens 480L-340 48000 lumens 480L-390 52000 lumens 480L-425 55000 lumens 480L-470 60000 lumens 720L-435 60000 lumens 720L-475 65000 lumens 720L-515 70000 lumens 720L-565 6 75000 lumens 720L-600 6 80000 lumens CLO Custom Lumen Output 1 AP AP-Amber Phosphor Converted 27K8 2700K, 80 CRI 3K7 3000K, 70 CRI 3K8 3000K, 80 CRI 35K8 3500K, 80 CRI 3K9 3000K, 90 CRI 4K7 4000K, 70 CRI 4K8 4000K, 80 CRI 4K9 4000K, 90 CRI 5K7 5000K, 70 CRI 5K8 5000K, 80 CRI 2 Type 2 3 Type 3 4F Type 4 Forward 4W Type 4 Wide 5QM Type 5 Square Medium 5QW Type 5 Square Wide L Optic rotation left R Optic rotation right UNV 120- 277V 120 120V 208 208V 240 240V 277 277V 347 347V 480 480V ––– Mounting Color Options Network Control Options A Arm mount for square pole/flat surface A_Arm mount for round pole 2 ASQU Universal arm mount for square pole A_U Universal arm mount for round pole 2 AAU Adjustable arm for pole mounting (universal drill pattern) AA_U Adjustable arm mount for round pole 2 ADU Decorative upswept Arm (universal drill pattern) AD_U Decorative upswept arm mount for round pole 2 MAF Mast arm fitter for 2-3/8" OD horizontal arm K Knuckle T Trunnion WB Wall Bracket, horizontal tenon with MAF WM Wall mount bracket with decorative upswept arm WA Wall mount bracket with adjustable arm BLT Black Matte Textured BLS Black Gloss Smooth DBT Dark Bronze Matte Textured DBS Dark Bronze Gloss Smooth GTT Graphite Matte Textured LGS Light Grey Gloss Smooth LGT Light Grey Gloss Textured PSS Platinum Silver Smooth WHT White Matte Textured WHS White Gloss Smooth VGT Verde Green Textured Color Option CC Custom Color F Fusing 2PF Dual Power Feed 2DR Dual Driver TE Tooless Entry BC Backlight Control TB Terminal Block NXSPW-14F NX Wireless, PIR Occupancy Sensor, Dimming Daylight Harvesting, 14' 1,3,4 NXSPW-40F NX Wireless, PIR Occupancy Sensor, Dimming Daylight Harvesting, 40' 1,3,4 NXSP-14F NX, PIR Occupancy Sensor, Dimming Daylight Harvesting, 14' 3,4 NXSP-40F NX, PIR Occupancy Sensor, Dimming Daylight Harvesting, 40' 3,4 NXWE NX Wireless Enabled (module + radio) 3,4 WIR wiSCAPE® In-Fixture Module 3,4 WIRSC wiSCAPE® Module and Occupancy Sensor 3,4 Stand Alone Sensors BTS-14F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor 4 BTS-40F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor 4 BTSO-12F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor, up to 12' mounting height 4 7PR 7-Pin Receptacle 4 7PR-SC 7-Pin Receptacle with shorting cap 4 3PR 3-Pin twist lock 4 3PR-SC 3-Pin receptacle with shorting cap 4 3PR-TL 3-Pin PCR with photocontrol 4 Programmed Controls ADD AutoDim Timer Based Dimming 4 ADT AutoDim Time of Day Dimming 4 Photocontrols PC Button Photocontrol 4,7 1 – Items with a grey background can be done as a custom order. Contact brand representative for more information 2 – Replace “_” with “2” for 2.5”-3.4” OD pole, “3” for 3.5”-4.13” OD pole, “4” for 4.18”-5.25” OD pole, “5” for 5.5”-6.5” OD pole 3 – Networked Controls cannot be combined with other control options 4 – Not available with 2PF option 5 – Not available with Dual Driver option 6 – Some voltage restrictions may apply when combined with controls 7 – Not available with 480V Example: VP–2–320L-145–3K7–2–R–UNV–A3–BLT Index Page2/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4W-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S4-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 4/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: Hubbell Control Solutions — Accessories (Sold Separately) NX Distributed Intelligence™ NXOFM- 1R1D-UNV On-fixture Module (7-pin), On / Off / Dim, Daylight Sensor with HubbNET Radio and Bluetooth® Radio, 120–480VAC wiSCAPE® Lighting Control WIR-RME-L On-fixture Module (7-pin or 5-pin), On / Off / Dim, Daylight Sensor with wiSCAPE Radio, 110–480VAC SCP-REMOTE Remote Control for SCP/_F option. Order at least one per project to program and control the occupancy sensor For additional information related to these accessories please visit www.hubbellcontrolsolutions.com. Options provided for use with integrated sensor, please view specification sheet ordering information table for details. ORDERING GUIDE (CONTINUED) CATALOG # –– Accessory Type Size Option SHD Shield MTG Mounting 1 Size 1 2 Size 2 3 Size 3 4 Size 4 HSS-90-B House Side Shield 90º Back HSS-90-F House Side Shield 90º Front HSS-90-S House Side Shield 90º Side HSS-270-BSS House Side Shield 270º Back/Side/Side HSS-270-FSS House Side Shield 270º Front/Side/Side HSS-270-FSB House Side Shield 270º Front/Side/Back HSS-360 House Side Shield 360º BC Back Light Control A Arm Mount for square pole/flat surface ASQU Universal Arm Mount for square pole AAU Adjustable Arm for pole mounting ADU Decorative upswept Arm RPA Round Pole Adapter MAF Mast Arm Fitter for 2-3/8" OD horizontal arm K Knuckle T Trunnion WB Wall Bracket (compatible with universal arm mounts) – Color BLS Black Gloss Smooth BLT Black Matte Textured DBS Dark Bronze Gloss Smooth DBT Dark Bronze Matte Textured GTT Graphite Matte Textured LGS Light Gray Gloss Smooth PSS Platinum Silver Smooth WHS White Gloss Smooth WHT White Matte Textured VGT Green Landscape Decorative LEG Legacy Colors Color Option CC Custom Color CONTROLS ™ Control Option Sensor Networkable Scheduling Occupancy Daylight Harvesting On/Off Control Programming Pair with Sensor Sensor Mounting Height NXWE –✔✔––✔✔–– NXSPW_F NXSM-P ✔✔✔✔✔✔–14ft, 40ft NXSP_F NXSM-P ––✔✔✔––14ft, 40ft BTSO12F BTSMP-OMNI ––✔✔✔Bluetooth –12ft BTS_F BTSMP ––✔✔–––14ft, 40ft ADD ––✔––✔–✔– ADT ––✔––✔–✔– 7PR –Paired with external control Paired with external control –Paired with external control Paired with external control –✔– 7PR-SC –––––––✔– 3PR –––––Paired with external control –✔– 3PR-SC –––––––✔– 3PR-TL ––––✔✔–✔– WIR –✔✔–✔✔Gateway –– WIRSC BTSMP ✔✔✔✔✔Gateway –14ft, 40ft – Accessory Type Option MSC Miscellaneous BIRD SPK Bird Spike Index Page3/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4W-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S4-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 5/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DELIVERED LUMENS DATE:LOCATION: TYPE:PROJECT: CATALOG #: PROJECTED LUMEN MAINTENANCE Ambient Temp.0 25,000 *TM-21-11 36,000 50,000 100,000 Calculated L70 (Hours) 25°C / 77°F 1.00 0.97 0.96 0.95 0.91 408,000 40°C / 104°F 0.99 0.96 0.95 0.94 0.89 356,000 LUMINAIRE AMBIENT TEMPERATURE FACTOR (LATF) Ambient Temperature Lumen Multiplier 0°C 32°F 1.03 10°C 50°F 1.01 20°C 68°F 1.00 25°C 77°F 1.00 30°C 86°F 0.99 40°C 104°F 0.98 50°C 122°F 0.97 For delivered lumens, please see Lumens Data PDF on www.hubbelllighting.com Micro Strike Lumen Multiplier CCT 70 CRI 80 CRI 90 CRI 2700K –0.841 – 3000K 0.977 0.861 0.647 3500K –0.900 – 4000K 1 0.926 0.699 5000K 1 0.937 0.791 Monochromatic Amber Multiplier Amber 0.250 Strike Lumen Multiplier CCT 70 CRI 80 CRI 90 CRI 2700K –0.859 – 3000K 0.941 0.912 0.703 3500K –0.906 – 4000K 1 0.894 0.734 5000K 1 0.879 0.711 Monochromatic Amber Multiplier Amber 0.255 Index Page4/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4W-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S4-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 6/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com ELECTRICAL DATA: MICRO STRIKE DATE:LOCATION: TYPE:PROJECT: CATALOG #: # OF LEDS 160 NOMINAL WATTAGE 35 50 75 100 115 135 160 SYSTEM POWER (W)34.9 50.5 72.1 97.2 111.9 132.2 157.8 INPUT VOLTAGE (V)CURRENT (Amps) 120 0.29 0.42 0.63 0.83 0.96 1.13 1.33 208 0.17 0.24 0.36 0.48 0.55 0.65 0.77 240 0.15 0.21 0.31 0.42 0.48 0.56 0.67 277 0.13 0.18 0.27 0.36 0.42 0.49 0.58 347 0.10 0.14 0.22 0.29 0.33 0.39 0.46 480 0.07 0.10 0.16 0.21 0.24 0.28 0.33 # OF LEDS 320 NOMINAL WATTAGE 145 170 185 210 235 255 315 SYSTEM POWER (W)150 166.8 185.7 216.2 240.9 261.5 312 INPUT VOLTAGE (V)CURRENT (Amps) 120 1.21 1.42 1.54 1.75 1.96 2.13 2.63 208 0.70 0.82 0.89 1.01 1.13 1.23 1.51 240 0.60 0.71 0.77 0.88 0.98 1.06 1.31 277 0.52 0.61 0.67 0.76 0.85 0.92 1.14 347 0.42 0.49 0.53 0.61 0.68 0.73 0.91 480 0.30 0.35 0.39 0.44 0.49 0.53 0.66 # OF LEDS 480 NOMINAL WATTAGE 285 320 340 390 425 470 SYSTEM POWER (W)286.2 316.7 338.4 392.2 423.2 468 INPUT VOLTAGE (V)CURRENT (Amps) 120 2.38 2.67 2.83 3.25 3.54 3.92 208 1.37 1.54 1.63 1.88 2.04 2.26 240 1.19 1.33 1.42 1.63 1.77 1.96 277 1.03 1.16 1.23 1.41 1.53 1.70 347 0.82 0.92 0.98 1.12 1.22 1.35 480 0.59 0.67 0.71 0.81 0.89 0.98 # OF LEDS 720 NOMINAL WATTAGE 435 475 515 565 600 SYSTEM POWER (W)429.3 475 519.1 565.2 599.9 INPUT VOLTAGE (V)CURRENT (Amps) 120 3.63 3.96 4.29 4.71 5.00 208 2.09 2.28 2.48 2.72 2.88 240 1.81 1.98 2.15 2.35 2.50 277 1.57 1.71 1.86 2.04 2.17 347 1.25 1.37 1.48 1.63 1.73 480 0.91 0.99 1.07 1.18 1.25 Index Page5/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4W-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S4-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 7/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: ELECTRICAL DATA: STRIKE CATALOG #: # OF LEDS 36 NOMINAL WATTAGE 39 55 85 105 115 SYSTEM POWER (W)39.6 56.8 83.6 108.2 113.7 INPUT VOLTAGE (V)CURRENT (Amps) 120 0.33 0.46 0.71 0.88 1.00 208 0.19 0.26 0.41 0.50 0.58 240 0.16 0.23 0.35 0.44 0.50 277 0.14 0.20 0.31 0.38 0.43 347 0.11 0.16 0.24 0.30 0.35 480 0.08 0.11 0.18 0.22 0.25 # OF LEDS 72 NOMINAL WATTAGE 120 145 180 210 215 SYSTEM POWER (W)120.9 143.2 179.4 210.2 214.8 INPUT VOLTAGE (V)CURRENT (Amps) 120 0.96 1.21 1.50 1.75 2.00 208 0.55 0.70 0.87 1.01 1.15 240 0.48 0.60 0.75 0.88 1.00 277 0.42 0.52 0.65 0.76 0.87 347 0.33 0.42 0.52 0.61 0.69 480 0.24 0.30 0.38 0.44 0.50 # OF LEDS 108 NOMINAL WATTAGE 240 250 280 320 325 SYSTEM POWER (W)241.7 250.8 278.3 322.1 324.7 INPUT VOLTAGE (V)CURRENT (Amps) 120 1.79 2.08 2.33 2.71 3.04 208 1.03 1.20 1.35 1.56 1.75 240 0.90 1.04 1.17 1.35 1.52 277 0.78 0.90 1.01 1.17 1.32 347 0.62 0.72 0.81 0.94 1.05 480 0.45 0.52 0.58 0.68 0.76 # OF LEDS 162 NOMINAL WATTAGE 365 405 445 485 545 SYSTEM POWER (W)362.6 403.6 445.1 487.1 543.9 INPUT VOLTAGE (V)CURRENT (Amps) 120 2.67 3.38 3.71 4.04 4.54 208 1.54 1.95 2.14 2.33 2.62 240 1.33 1.69 1.85 2.02 2.27 277 1.16 1.46 1.61 1.75 1.97 347 0.92 1.17 1.28 1.40 1.57 480 0.67 0.84 0.93 1.01 1.14 Index Page6/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4W-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S4-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 8/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: MICRO STRIKE PHOTOMETRY The following diagrams represent the general distribution options offered for this product. For detailed information on specific product configurations, see website photometric test reports. Type 2Type 2 Type 4F Type 4WType 4 Wide Type 5QMType 4F Type 5QMType 5QM Type 5QW Type 3Type 3 Index Page7/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4W-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S4-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 9/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: OPTIC STRIKE PHOTOMETRY The following diagrams represent the general distribution options offered for this product. For detailed information on specific product configurations, see website photometric test reports. Type FR - Front Row/Auto OpticType FR – Front Row/Auto Optic Type 4Type 4 Forward Type 2Type 2 Type 4 WideType 4 Wide Type 5R (rectangular)Type 5R (rectangular) Type CornerType Corner Type 3Type 3 Type 5QMType 5QM Type 5W (round wide)Type 5W (round wide)Type TC (tennis court)Type TC Index Page8/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4W-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S4-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 10/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: DIMENSIONS EPA VP1 (Size 1)VP2 (Size 2)VP3 (Size 3)VP4 (Size 4)Config. Single Fixture 0.454 0.555 0.655 0.698 Two at 180 0.908 1.110 1.310 1.396 Two at 90 0.583 0.711 0.857 0.948 Three at 90 1.037 1.266 1.512 1.646 Three at 120 0.943 1.155 1.392 1.680 Four at 90 1.166 1.422 1.714 1.896 Weight lbs kgs VP1 (Size 1)13.7 6.2 VP2 (Size 2)16.0 7.26 VP3 (Size 3)25.9 11.7 VP4 (Size 4)30.8 13.9 XX XX/XX/XX ECO-XXXX XXX XXX 12765432 D C B A 1276543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 11 SHTS Error: No reference Error: No reference * * * VP1-ASQ.dftjdietrich09/24/21 XXX 05/19/05 XXX 05/19/05 PV:1 14.373 5.000 16.756 21.756 3.477 SIZE 1 SIZE 3 SIZE 2 SIZE 4 5.00 16.76 14.37 21.76 3.48 XX XX/XX/XX ECO-XXXX XXX D C B A 128765432 12876543 This document contains confidential and proprietary information Lighting. Receipt or possession of this document does not conv rights to reproduce or disclose its contents, or to make, use , or anything it may disclose. Reproduction, disclosure, or use of the or its contents, without the specific written authorization of Hubb Lighting, may violate the intellectual property rights of Hubbell L UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. DESNRECORDDATEREV SHT 12 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 5.000 21.877 14.373 26.876 3.477 5.00 21.88 14.37 26.88 3.48 XX XX/XX/XX ECO-XXXX XXX XXX 12765432 D C B A 1276543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 11 SHTS Error: No reference Error: No reference * * * VP3-ASQ.dftjdietrich09/24/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.500 16.113 34.476 3.477 26.976 XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 11 SHTS Error: No reference Error: No reference * * * VP4-ASQ.dftjdietrich09/24/21 XXX 05/19/05 XXX 05/19/05 PV:1 19.622 7.500 27.980 35.476 3.477 7.50 7.50 3.48 3.48 26.97 34.47 27.98 19.62 35.48 Index Page9/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4W-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S4-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 11/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: MOUNTING ASQ–STRAIGHT ARM MOUNT Fixture ships with integral arm for ease of installation. Compatible with Hubbell Outdoor B3 drill pattern. For round poles add applicable suffix (2/3/4/5) ASQU–UNIVERSAL ARM MOUNT Universal mounting block for ease of installation. Compatible with drill patterns from 2.5" to 4.5" and Hubbell drill pattern S2. For round poles add applicable suffix (2/3/4/5) AAU–ADJUSTABLE ARM FOR POLE MOUNTING Rotatable arm mounts directly to pole. Compatible with drill patterns from 2.5" to 4.5" and Hubbell drill pattern S2. For round poles add applicable suffix (2/3/4/5). Rotatable in 15˚ aiming angle increments. Micro Strike configurations have a 45° aiming limitation. Strike configurations have a 30° aiming limitation. ADU–DECORATIVE UPSWEPT ARM Upswept Arm compatible with drill patterns from 2.5" to 4.5". For round poles add applicable suffix (2/3/4/5). MAF–MAST ARM FITTER Fits 2-3/8" OD horizontal tenons. K–KNUCKLE Knuckle mount 15˚ aiming angle increments for precise aiming and control, fits 2-3/8" tenons or pipes. Micro Strike configurations have a 45° aiming limitation. Strike configurations have a 30° aiming limitation. T–TRUNNION Trunnion for surface and crossarm mounting using (1) 3/4" or (2) 1/2" size through bolts. Micro Strike configurations have a 45° aiming limitation. Strike configurations have a 30° aiming limitation. XX XX/XX/XX ECO-XXXX XXX XXX 12765432 D C B A 1276543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 D C B A 8 7 6 5 4 8 7 6 5 4 7.762 7.500 7.500 9.300 7.731 D C B A 8 7 6 5 4 3 8 7 6 5 4 3 UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE CRITICAL DIMENSIONS THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO: jdietrich 09/16 XXX 05/19 XXX 05/19 7.762 7.500 7.500 9.300 7.731 XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 8.3" 7.5 " 7.5 " 5.0" 7.8 " XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 7.7 " WM–WALL MOUNT Compatible with universal arm mount, adjustable arm mount, and decorative arm mount. The WA option uses the same wall bracket but replaces the decorative arm with an adjustable arm. XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 9.3" XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 11 SHTS Error: No reference Error: No reference * * * VP1-ASQ.dftjdietrich09/24/21 XXX 05/19/05 XXX 05/19/05 PV:1 14.373 5.000 16.756 21.756 3.477 5.0" Index Page10/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4W-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S4-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 12/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: ADDITIONAL INFORMATION (CONTINUED) HOUSE SIDE SHIELD FIELD INSTALL ACCESSORIES Instruction Sheet: 93158127_P1Hubbell Lighting701 Millennium Blvd.Greenville, SC 29607 Technical Support: (864) 678-1000Fax: (864) 898-1065www.hubbell.com VPR2x HSS-90-B-xx VPR2x HSS-90-S-xx VPR2x HSS-90-S-xx VPR2x HSS-270-BSS-xx VPR2x HSS-270-FSS-xx VPR2x HSS-270-FSB-xx VPR2x HSS-270-FSB-xx VPR2x HSS-360-xx VPR2x HSS-90-F-xx VPR2 HOUSE SIDE SHIELD ACCESSORY NOMENCLATURE:"x" denotes size 1, 2, 3, or 4"xx" denotes color selection (DBT, GTT,WHT, etc.) Index Page11/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4W-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S4-BL INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 13/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: ADDITIONAL INFORMATION (CONTINUED) PROGRAMMED CONTROLS ADD-AutoDim Timer Based Options • Light delay options from 1-9 hours after the light is turned on to dim the light by 10-100%. To return the luminaire to its original light level there are dim return options from 1-9 hours after the light has been dimmed previously. EX: ADD-6-5-R6 ADT-AutoDim Time of Day Based Option • Light delay options from 1AM-9PM after the light is turned on to dim the light by 10-100%. To return the luminaire to its original light level there are dim return options from 1AM-9PM after the light has been dimmed previously. EX: ADT-6-5-R6 ADD Control Options Configurations Choices Example Choice Picked Auto-Dim Options 1-9 Hours 6 - Delay 6 hours Auto-Dim Brightness 10-100% Brightness 5 - Dim to 50% brightness Auto-Dim Return Delay 0-9 Hours R6 - Return to full output after 6 hours ADD Control Options Configurations Choices Example Choice Picked Auto-Dim Options 12-3 AM and 6-11 PM 6 - Dim at 6PM Auto-Dim Brightness 10-100% Brightness 5 - Dim to 50% Auto-Dim Return 12-6 AM and 9-11P R6 - Return to full output at 6AM USE OF TRADEMARKS AND TRADE NAMES All product and company names, logos and product identifies are trademarks ™ or registered trademarks ® of Hubbell Lighting, Inc. or their respective owners. Use of them does not necessarily imply any affiliation with or endorsement by such respective owners. Index Page12/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4W-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S4-BL INDY22-104626 Beacon Products • 701 Millennium Blvd, Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2020 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA RSS-B POLES-SPEC JuLy 28, 2020 8:45 AM APPLICATIONS • Lighting installations for side and top mounting of luminaires with effective projected area (EPA) not exceeding maximum allowable loading of the specified pole in its installed geographic location CONSTRUCTION • SHAFT: One-piece straight steel with round cross section, Minimum yield of 46,000 psi (ASTM-A500, Grade C); Longitudinal weld seam to appear flush in shaft wall; Steel base plate with axial bolt circle slots welded flush to pole shaft having minimum yield of 36,000 psi (ASTM A36) • BASE COVER: Two-piece square aluminum base cover included standard • POLE CAP: Pole shaft supplied with removable cover when applicable; Tenon and post-top configurations also available • HAND HOLE: Rectangular 3x5 steel hand hole frame (2.38” x 4.38” opening); Mounting provisions for grounding lug located behind gasketed cover • ANCHOR BOLTS: Four galvanized anchor bolts provided per pole with minimum yield of 55,000 psi (ASTM F1554). Galvanized hardware with two washers and two nuts per bolt for leveling FINISH • Durable thermoset polyester powder coat paint finish with nominal 3.0 mil thickness • Powder paint prime applied over “white metal” steel substrate cleaned via mechanical shot blast method • Decorative finish coat available in multiple standard colors; Custom colors available; RAL number preferable; RSS-B SERIES POLES ROUND STRAIGHT STEEL Overall Height 10' - 30' Handhole 18" Cat.# Approvals Job Type BASE DETAILPOLE CAP TENON BASE COVER Bolt Circle (Outer) Bolt Circle (Inner) Bolt Square (Outer) Bolt Square (Inner) 270˚90˚ 180˚ 0˚ Handhole ORDERING INFORMATION SERIES RSS-B Round Straight Steel Pole Beacon RSS B 25 40 A/B/C 2L BLTB2 UL MOUNTING ORIENTATION MOUNTING 1 Single arm mount 2 Two fixtures at 180˚ 2L Two fixtures at 90˚ 3T Three fixtures at 90˚ 3Y Three fixtures at 120˚ 4 Four fixtures at 90˚ TA Tenon (2.375” OD) TB Tenon (2.875” OD) TC Tenon (3.5” OD) OT No drilling (includes pole cap) HEIGHT Reference page 2 Ordering matrix SHAFT Reference page 2 Ordering matrix THICKNESS Reference page 2 Ordering matrix OPTIONS GFI1 20 Amp GFCI Receptacle and Cover EHH1 Extra Handhole C051 .5” Coupling C071 .75” Coupling C201 2” Coupling MPB1 Mid-pole Luminaire Bracket VM2 2nd mode vibration damper LAB Less Anchor Bolts UL UL Certified RBC Round Base Cover ORDERING EXAMPLE: Reference page 2 for available configurations ACCESSORIES- Order Separately Catalog Number Description VM2SXX 2nd mode vibration damper 1 Specify option location using logic found on page 2 (Option Orientation) DRILL PATTERN B1 Cruzer, “AM” arm B3 2 bolt (2-1/2” spacing), Viper “A” arm S2 2 bolt (3-1/2” spacing), Viper “AD” arm FINISH BLT Black Matte Textured BLS Black Gloss Smooth DBT Dark Bronze Matte Textured DBS Dark Bronze Gloss Smooth GTT Graphite Matte Textured LGS Light Grey Gloss Smooth PSS Platinum Silver Smooth WHT White Matte Textured WHS White Gloss Smooth VGT Verde Green Textured Color Option CC Custom Color 22 50 Index Page13/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4W-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S4-BL INDY22-104626 Beacon Products • 701 Millennium Blvd, Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2020 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA RSS-B POLES-SPEC JuLy 28, 2020 8:45 AM Overall Height 10'-30' 18" TENON Bolt Circle (Outer) Bolt Circle (Inner) Bolt Square (Outer) Bolt Square (Inner) Height of option in feet BASE COVER 270˚90˚ 180˚ 0˚ Handhole VIBRATION DAMPER 2ND MODE ORDERING INFORMATION Cont. NOTE Factory supplied template must be used when setting anchor bolts. Beacon Products will deny any claim for incorrect anchorage placement resulting from failure to use factory supplied template and anchor bolts. For more information about pole vibration and vibration dampers, please consult http://cdn.beaconproducts.com/content/products/literature/literature_files/Pole_Wind_Induced_Flyer_HLOI0022.pdf Due to our continued efforts to improve our products, product specifications are subject to change without notice. Follow the logic below when ordering location specific options. For each option, include its orientation (in degrees) and its height (in feet). Example: Option C07 should be ordered as: RSS-B-20-40-A-TA-DB-CO5-0-15 (.5” coupling on the handhole/arm side of pole, 15 feet up from the pole base) 1’ spacing required between option. Consult factory for other configurations. OPTION ORIENTATIONGFI – 20 AMP GFCI RECEPTACLE & COVER EHH - EXTRAHANDHOLE C05 - C07 - C20 -COUPLING MPB - MID POLE BRACKET VM2 - VIBRATION DAMPER 2ND MODE VM2SXX - VIBRATION DAMPER 2ND MODE Anchor Base Detail Bolt Circle Bolt Slots/Holes 0°-HandholeBolt Square 270°Arm 1 90° Arm 2 180° As viewed from top of pole. Bolt Circle Bolt Slots/Holes 0°-HandholeBolt Square 270°Arm 1 90° Arm 2 180° As viewed from top of pole. Provision for Grounding 1/2” - 14 NPSC Threads 3/4” - 14 NPSC Threads 2” -11.5 NPSC Threads Round Steel Pole Attachment stub 5” long welded to pole Arm, 3” Sq. x 13.5” long ships separately 2” pipe tenon 4.25” tall Round Steel Pole Standard hand hole frame Adapter plate Gasket 20 AMP GFCI Wet Locations In-use Cover Overall Height 10'-30' 18" TENON Bolt Circle (Outer) Bolt Circle (Inner) Bolt Square (Outer) Bolt Square (Inner) BASE COVER 270˚90˚ 180˚ 0˚ Handhole Factory installed, internal damper designed to alter pole resonance to reduce movement and material fatigue caused by 2nd mode vibration. Field installed, internal damper designed to alter pole resonance to reduce movement and material fatigue caused by 2nd mode vibration. VM2S08 – 8' VM2S12 – 12' VM2S16 – 16' VM2S20 – 20' VM2S24 – 24' Catalog Number Height Nominal Shaft Dimensions Wall Thickness Bolt Circle (suggested) Bolt Circle (range) Bolt Square (range) Base Plate Square Base Plate Thickness Anchor bolt size Bolt Projection Pole weightFeetMeters RSS-B-10-40-A 10 3.0 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 52 RSS-B-12-40-A 12 3.7 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 62 RSS-B-14-40-A 14 4.3 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 72 RSS-B-16-40-A 16 4.9 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 83 RSS-B-18-40-A 18 5.5 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 93 RSS-B-20-40-A 20 6.1 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 103 RSS-B-10-40-B 10 3.0 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 77 RSS-B-12-40-B 12 3.7 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 92 RSS-B-14-40-B 14 4.3 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 107 RSS-B-16-40-B 16 4.9 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 122 RSS-B-18-40-B 18 5.5 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 138 RSS-B-20-40-B 20 6.1 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 153 RSS-B-10-50-B 10 3.0 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 97 RSS-B-12-50-B 12 3.7 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 116 RSS-B-14-50-B 14 4.3 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 135 RSS-B-16-50-B 16 4.9 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 155 RSS-B-18-50-B 18 5.5 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 174 RSS-B-20-50-B 20 6.1 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 193 RSS-B-25-50-B 25 7.6 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 242 RSS-B-20-60-C 20 6.1 6" round 0.250"11"9.0" - 11"6.36" - 7.78"10.25 1.0 1" x 36" x 4"4.5 307 RSS-B-25-60-C 25 7.6 6" round 0.250"11"9.0" - 11"6.36" - 7.78"10.25 1.0 1" x 36" x 4"4.5 384 RSS-B-30-60-C 30 9.1 6" round 0.250"11"9.0" - 11"6.36" - 7.78"10.25 1.0 1" x 36" x 4"4.5 461 VIBRATION DAMPER 2ND MODE Index Page14/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4W-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S4-BL INDY22-104626 Beacon Products • 701 Millennium Blvd, Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2020 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA RSS-B POLES-SPEC JuLy 28, 2020 8:45 AM ASCE7-05 WIND MAP FLORIDA REGION WIND MAP 180 180 170 170 160 160 150 150 140 140140150 140 150 130 120 115 115 120 130 • Florida region wind map above is based upon 3-second gust winds and the 2017 Florida Building Code HAWAII – 105 mph PUERTO RICO – 145 mph NOTES: • Values are based on 50 year mean recurrence interval 30’ above grade. • Hawaii has an 105 mph wind velocity. • Puerto Rico has a 125 mph wind velocity. • Caution must be exercised in determining wind velocities in special wind areas such as: Mountainous Regions Areas surrounding the Great Lakes or other large bodies of water or open land. Areas subject to extreme wind conditions, such as hurricanes, typhoons, cyclones, and tornadoes. Areas adjacent to airports. Any specific area with a known or suspected abnormally high intermittent wind condition caused by geography, adjacent structures, or other specific local conditions that may not be recorded in National Weather Service records. • Allowable pole EPA for jobsite wind conditions must be equal to or greater than fixture EPA. Responsibility lies with the specifier for correct pole selection based on AASHTO wind map and job location. • The Wind Map is intended only as a general guide. Always consult local authorities to determine maximum wind velocities, gusting and unique wind conditions for each specific application. • CAUTION: Wind speeds and listed EPAs are for ground mounted installations. Poles mounted on structures (such as bridges and buildings) must consider vibration and coefficient of height factors beyond this general guide. Consult AASHTO standards. • Extreme Wind Events: Hurricanes, Typhoons, Cyclones, or Tornadoes expose poles to flying debris, wind shear, and other unpredictable aerodynamic forces not indicated by the wind velocity ratings. • Pole Strength Limited Warranty: Standard, unmodified Kim lighting Poles installed as recommended, undamaged by corrosion, or lack of maintenance, shall withstand steady wind conditions as provided on page 2 (Allowable Pole EPA). Installation of poles without luminaires, or attachment of any unauthorized accessories to poles shall void this warranty. 85 90 90100110 120 130 130 140 140 140 150 150 14013012011010090 Special Wind Region(Consult Local Authorities) 90 Wind Map United States and Canada Florida Building Code 2017 EPA Load Rating - 3 second gust wind speeds Catalog Number 115 120 130 140 150 160 170 180 RSS-B-10-40-A 25.0 23..5 20.0 17.0 14.5 12.5 11.0 10.0 RSS-B-12-40-A 21.0 19.0 16.0 13.5 11.5 9.5 9.0 8.0 RSS-B-14-40-A 17.5 15.7 13.0 10.8 9.0 7.5 7.0 6.5 RSS-B-16-40-A 14.2 13.0 10.5 8.5 7.0 5.8 5.0 4.5 RSS-B-18-40-A 11.6 10.4 8.2 6.8 5.4 4.4 4.0 3.6 RSS-B-20-40-A 9.5 8.4 6.5 5.2 4.0 3.0 2.8 2.5 RSS-B-10-40-B 25.0 25.0 25.0 22.0 19.0 16.5 15.2 13.4 RSS-B-12-40-B 25.0 25.0 20.8 17.6 15.1 13.0 12.0 10.6 RSS-B-14-40-B 22.5 20.4 17.2 14.4 12.2 10.4 10.0 8.8 RSS-B-16-40-B 18.9 17.0 14.1 11.7 9.8 8.2 7.5 7.0 RSS-B-18-40-B 15.6 14.1 11.5 9.4 7.7 6.4 6.0 5.7 RSS-B-20-40-B 13.0 11.6 9.3 7.5 6.0 4.8 4.0 3.5 RSS-B-10-50-B 25.0 25.0 25.0 25.0 25.0 23.6 20.8 18.4 RSS-B-12-50-B 25.0 25.0 25.0 25.0 22.2 19.3 16.8 14.8 RSS-B-14-50-B 25.0 25.0 23.9 21.5 18.4 15.9 13.8 12.1 RSS-B-16-50-B 25.0 23.8 19.6 18.0 15.4 13.2 11.4 9.9 RSS-B-18-50-B 21.8 19.6 16.1 15.1 12.8 10.8 9.3 8.0 RSS-B-20-50-B 18.2 16.4 14.1 12.7 10.7 9.0 7.7 6.5 RSS-B-25-50-B 11.7 10.2 9.4 8.4 6.8 5.6 4.5 3.7 RSS-B-20-60-C 25.0 25.0 25.0 22.1 18.8 16.1 13.9 12.0 RSS-B-25-60-C 24.7 22.4 18.4 15.3 12.8 10.8 9.1 7.6 RSS-B-30-60-C 18.2 16.3 13.2 10.7 8.7 7.0 5.7 4.5 ASCE 7-05 wind map EPA Load Rating - 3 second gust wind speeds Catalog Number 85 90 100 110 120 105 145 RSS-B-10-40-A 21.0 18.7 15.0 12.2 10.1 13.5 6.8 RSS-B-12-40-A 16.8 14.8 11.8 9.5 7.7 10.5 5.1 RSS-B-14-40-A 13.6 12.0 9.4 7.4 5.9 8.3 3.9 RSS-B-16-40-A 11.1 9.7 7.5 5.8 4.5 6.6 2.9 RSS-B-18-40-A 9.0 7.8 5.8 4.4 3.3 5.1 2 RSS-B-20-40-A 7.2 6.2 4.5 3.1 2.2 3.8 1.2 RSS-B-10-40-B 25.0 25.0 22.4 18.4 15.3 20.2 10.4 RSS-B-12-40-B 25.0 22.3 17.9 14.5 12.0 16.1 8.1 RSS-B-14-40-B 20.6 18.3 14.6 11.7 9.6 13 6.4 RSS-B-16-40-B 17.2 15.2 12.0 9.5 7.7 10.7 5.1 RSS-B-18-40-B 14.3 12.6 9.8 7.6 6.1 8.6 3.9 RSS-B-20-40-B 11.8 10.3 7.9 6.0 4.7 6.9 2.9 RSS-B-10-50-B 25.0 25.0 25.0 25.0 25.0 25.0 17.7 RSS-B-12-50-B 25.0 25.0 25.0 24.8 20.8 25.0 14.3 RSS-B-14-50-B 25.0 25.0 24.7 20.5 17.2 22.4 11.7 RSS-B-16-50-B 25.0 25.0 20.7 17.1 14.3 18.8 9.7 RSS-B-18-50-B 24.5 21.6 17.3 14.3 11.9 15.7 8.0 RSS-B-20-50-B 20.6 18.1 14.4 11.8 9.8 13.0 6.5 RSS-B-25-50-B 13.6 11.7 9.1 7.3 6.0 8.1 3.8 RSS-B-20-60-C 25.0 25.0 25.0 25.0 21.5 25.0 14.8 RSS-B-25-60-C 25.0 25.0 21.9 18.0 15.0 19.8 10.1 RSS-B-30-60-C 21.8 19.4 15.6 12.7 10.6 14.1 6.9 120 110 100 90 90 100 110 120 130 130 130 130 ALASKA REGION WIND MAP *PRINTED WITH PERMISSION FROM ASCE Index Page15/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: VP-2-320L-185-4K7-4W-UNV-A3-***- BC RSSB25-50B-1-B3-*** Notes: Type: S4-BL INDY22-104626 Beacon Products • 701 Millennium Blvd, Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2020 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA RSS-B POLES-SPEC JuLy 28, 2020 8:45 AM • Allowable EPA, to determine max pole loading weight, multiply allowable EPA by 30 lbs. • The tables for allowable pole EPA are based on the ASCE 7-05 Wind Map or the Florida Region Wind Map for the 2010 Florida Building Code. The Wind Maps are intended only as a general guide and cannot be used in conjunction with other maps. Always consult local authorities to determine maximum wind velocities, gusting and unique wind conditions for each specific application • Allowable pole EPA for jobsite wind conditions must be equal to or greater than the total EPA for fixtures, arms, and accessories to be assembled to the pole. Responsibility lies with the specifier for correct pole selection. Installation of poles without luminaires or attachment of any unauthorized accessories to poles is discouraged and shall void the manufacturer’s warranty • Wind speeds and listed EPAs are for ground mounted installations. Poles mounted on structures (such as bridges and buildings) must consider vibration and coefficient of height factors beyond this general guide; Consult local and federal standards • Wind Induced Vibration brought on by steady, unidirectional winds and other unpredictable aerodynamic forces are not included in wind velocity ratings. Consult Hubbell Lighting’s Pole Vibration Application Guide for environmental risk factors and design considerations. http://cdn.beaconproducts.com/content/products/literature/literature_files/Pole_Wind_Induced_Flyer_HLOI0022.pdf • Extreme Wind Events like, Hurricanes, Typhoons, Cyclones, or Tornadoes may expose poles to flying debris, wind shear or other detrimental effects not included in wind velocity ratings Due to our continued efforts to improve our products, product specifications are subject to change without notice. Wind-speed Website disclaimer: Hubbell Lighting has no connection to the linked website and makes no representations as to its accuracy. While the information presented on this third-party website provides a useful starting point for analyzing wind conditions, Hubbell Lighting has not verified any of the information on this third party website and assumes no responsibility or liability for its accuracy. The material presented in the windspeed website should not be used or relied upon for any specific application without competent examination and verification of its accuracy, suitability and applicability by engineers or other licensed professionals. Hubbell Lighting Inc. does not intend that the use of this information replace the sound judgment of such competent professionals, having experience and knowledge in the field of practice, nor to substitute for the standard of care required of such professionals in interpreting and applying the results of the windspeed report provided by this website. Users of the information from this third party website assume all liability arising from such use. Use of the output of these referenced websites do not imply approval by the governing building code bodies responsible for building code approval and interpretation for the building site described by latitude/longitude location in the windspeed report. http://windspeed.atcouncil.org NOTES Index Page16/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: (2) VP-2-320L-185-4K7-5QW-UNV- A3-*** (1) RSSB25-50B-1-B3-*** Notes: Type: S5 INDY22-104626 Page 1/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: KEY DATA Lumen Range 5,000–80,000 Wattage Range 36–600 Efficacy Range (LPW)92–155 Weight lbs. (kg)13.7-30.9 (6.2-13.9) CATALOG #: FEATURES • Low profile LED area/site luminaire with a variety of IES distributions for lighting applications such as auto dealership, retail, commercial, and campus parking lots • Featuring two different optical technologies, Strike and Micro Strike Optics, which provide the best distribution patterns for retrofit or new construction • Rated for high vibration applications including bridges and overpasses. All sizes are rated for 1.5G • Control options including photo control, occupancy sensing, NX Distributed Intelligence™, wiSCAPE and 7-Pin with networked controls • New customizable lumen output feature allows for the wattage and lumen output to be customized in the factory to meet whatever specification requirements may entail • Field interchangeable mounting provides additional flexibility after the fixture has shipped CONTROL TECHNOLOGY ™ See Certiﬁcation Speciﬁcations BUY AMERICANSOLUTIONS See Certiﬁcation Speciﬁcations BUY AMERICANSOLUTIONSIP65 VIPER Area/Site VIPER LUMINAIRE CONSTRUCTION • Die-cast housing with hidden vertical heat fins are optimal for heat dissipation while keeping a clean smooth outer surface • Corrosion resistant, die-cast aluminum housing with 1000 hour powder coat paint finish • External hardware is corrosion resistant OPTICS • Micro Strike Optics (160, 320, 480, or 720 LED counts) maximize uniformity in applications and come standard with mid- power LEDs which evenly illuminate the entire luminous surface area to provide a low glare appearance. Catalog logic found on page 2 • Strike Optics (36, 72, 108, or 162 LED counts) provide best in class distributions and maximum pole spacing in new applications with high powered LEDs. Strike optics are held in place with a polycarbonate bezel to mimic the appearance of the Micro Strike Optics so both solutions can be combined on the same application. Catalog logic found on page 3 • Both optics maximize target zone illumination with minimal losses at the house-side, reducing light trespass issues. Additional backlight control shields and house side shields can be added for further reduction of illumination behind the pole • One-piece silicone gasket ensures a weatherproof seal • Zero up-light at 0 degrees of tilt • Field rotatable optics INSTALLATION • Mounting patterns for each arm can be found on page 11 • Optional universal mounting block for ease of installation during retrofit applications. Available as an option (ASQU) or accessory for square and round poles. • All mounting hardware included CONTROLS (CONTINUED) • NX Distributed Intelligence™ available with in fixture wireless control module, features dimming and occupancy sensor • wiSCAPE® available with in fixture wireless control module, features dimming and occupancy sensor. Also available in 7-pin configuration CERTIFICATIONS• Meets the qualifications for DLC Premium • Listed to UL1598 and CSA C22.2#250.0-24 for wet locations and 40˚C ambient temperatures • 1.5 G rated for ANSI C136.31 high vibration applications • Fixture is IP65 rated • Meets IDA recommendations using 3K CCT configuration at 0 degrees of tilt • This product qualifies as a “designated country construction material” per FAR 52.225-11 Buy American-Construction Materials under Trade Agreements effective 04/23/2020. See Buy American Solutions. WARRANTY• 5 year warranty • See HLI Commercial and Industrial Outdoor Lighting Warranty for additional information SPECIFICATIONS INSTALLATION (CONTINUED) • Knuckle arm fitter option available for 2-3/8” OD tenon • For products with EPA less than 1 mounted to a pole greater that 20ft, a vibration damper is recommended ELECTRICAL • Universal 120-277 VAC or 347-480 VAC input voltage, 50/60 Hz • Ambient operating temperature -40˚C to 40˚C • Drivers have greater than 90% power factor and less than 20% THD • LED drivers have output power over-voltage, over-current protection and short circuit protection with auto recovery • Field replaceable surge protection device provides 20kA protection meeting ANSI/ IEEE C62.41.2 Category C High and Surge Location Category C3; Automatically takes fixture off-line for protection when device is compromised CONTROLS • Photo control, occupancy sensor programmable controls, and Zigbee wireless controls available for complete on/off and dimming control • Please consult brand or sales representative when combining control and electrical options as some combinations may not operate as anticipated depending on your application • 7-pin ANSI C136.41-2013 photocontrol receptacle option available for twist lock photocontrols or wireless control modules (control accessories sold separately) • 0- 10V Dimming Drivers are standard and dimming leads are extended out of the luminaire unless control options require connection to the dimming leads. Must specify if wiring leads are to be greater than the 6” standard OPTICS Index Page1/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: (2) VP-2-320L-185-4K7-5QW-UNV- A3-*** (1) RSSB25-50B-1-B3-*** Notes: Type: S5 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 2/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com MICROSTRIKE OPTICS – ORDERING GUIDE CATALOG # DATE:LOCATION: TYPE:PROJECT: CATALOG #: VP –––––––– Series Optic Platform Size Light Engine CCT/CRI Distribution Optic Rotation Voltage VP Viper Micro Strike 1 Size 1 2 Size 2 3 Size 3 4 Size 4 160L-35 6 5500 lumens 160L-50 6 7500 lumens 160L-75 10000 lumens 160L-100 12500 lumens 160L-115 15000 lumens 160L-135 18000 lumens 160L-160 21000 lumens 320L-145 21000 lumens 320L-170 24000 lumens 320L-185 27000 lumens 320L-210 30000 lumens 320L-235 33000 lumens 320L-255 36000 lumens 320L-315 6 40000 lumens 480L-285 40000 lumens 480L-320 44000 lumens 480L-340 48000 lumens 480L-390 52000 lumens 480L-425 55000 lumens 480L-470 60000 lumens 720L-435 60000 lumens 720L-475 65000 lumens 720L-515 70000 lumens 720L-565 6 75000 lumens 720L-600 6 80000 lumens CLO Custom Lumen Output 1 AP AP-Amber Phosphor Converted 27K8 2700K, 80 CRI 3K7 3000K, 70 CRI 3K8 3000K, 80 CRI 35K8 3500K, 80 CRI 3K9 3000K, 90 CRI 4K7 4000K, 70 CRI 4K8 4000K, 80 CRI 4K9 4000K, 90 CRI 5K7 5000K, 70 CRI 5K8 5000K, 80 CRI 2 Type 2 3 Type 3 4F Type 4 Forward 4W Type 4 Wide 5QM Type 5 Square Medium 5QW Type 5 Square Wide L Optic rotation left R Optic rotation right UNV 120- 277V 120 120V 208 208V 240 240V 277 277V 347 347V 480 480V ––– Mounting Color Options Network Control Options A Arm mount for square pole/flat surface A_Arm mount for round pole 2 ASQU Universal arm mount for square pole A_U Universal arm mount for round pole 2 AAU Adjustable arm for pole mounting (universal drill pattern) AA_U Adjustable arm mount for round pole 2 ADU Decorative upswept Arm (universal drill pattern) AD_U Decorative upswept arm mount for round pole 2 MAF Mast arm fitter for 2-3/8" OD horizontal arm K Knuckle T Trunnion WB Wall Bracket, horizontal tenon with MAF WM Wall mount bracket with decorative upswept arm WA Wall mount bracket with adjustable arm BLT Black Matte Textured BLS Black Gloss Smooth DBT Dark Bronze Matte Textured DBS Dark Bronze Gloss Smooth GTT Graphite Matte Textured LGS Light Grey Gloss Smooth LGT Light Grey Gloss Textured PSS Platinum Silver Smooth WHT White Matte Textured WHS White Gloss Smooth VGT Verde Green Textured Color Option CC Custom Color F Fusing 2PF Dual Power Feed 2DR Dual Driver TE Tooless Entry BC Backlight Control TB Terminal Block NXSPW-14F NX Wireless, PIR Occupancy Sensor, Dimming Daylight Harvesting, 14' 1,3,4 NXSPW-40F NX Wireless, PIR Occupancy Sensor, Dimming Daylight Harvesting, 40' 1,3,4 NXSP-14F NX, PIR Occupancy Sensor, Dimming Daylight Harvesting, 14' 3,4 NXSP-40F NX, PIR Occupancy Sensor, Dimming Daylight Harvesting, 40' 3,4 NXWE NX Wireless Enabled (module + radio) 3,4 WIR wiSCAPE® In-Fixture Module 3,4 WIRSC wiSCAPE® Module and Occupancy Sensor 3,4 Stand Alone Sensors BTS-14F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor 4 BTS-40F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor 4 BTSO-12F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor, up to 12' mounting height 4 7PR 7-Pin Receptacle 4 7PR-SC 7-Pin Receptacle with shorting cap 4 3PR 3-Pin twist lock 4 3PR-SC 3-Pin receptacle with shorting cap 4 3PR-TL 3-Pin PCR with photocontrol 4 Programmed Controls ADD AutoDim Timer Based Dimming 4 ADT AutoDim Time of Day Dimming 4 Photocontrols PC Button Photocontrol 4,7 1 – Items with a grey background can be done as a custom order. Contact brand representative for more information 2 – Replace “_” with “2” for 2.5”-3.4” OD pole, “3” for 3.5”-4.13” OD pole, “4” for 4.18”-5.25” OD pole, “5” for 5.5”-6.5” OD pole 3 – Networked Controls cannot be combined with other control options 4 – Not available with 2PF option 5 – Not available with Dual Driver option 6 – Some voltage restrictions may apply when combined with controls 7 – Not available with 480V Example: VP–2–320L-145–3K7–2–R–UNV–A3–BLT Index Page2/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: (2) VP-2-320L-185-4K7-5QW-UNV- A3-*** (1) RSSB25-50B-1-B3-*** Notes: Type: S5 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 4/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: Hubbell Control Solutions — Accessories (Sold Separately) NX Distributed Intelligence™ NXOFM- 1R1D-UNV On-fixture Module (7-pin), On / Off / Dim, Daylight Sensor with HubbNET Radio and Bluetooth® Radio, 120–480VAC wiSCAPE® Lighting Control WIR-RME-L On-fixture Module (7-pin or 5-pin), On / Off / Dim, Daylight Sensor with wiSCAPE Radio, 110–480VAC SCP-REMOTE Remote Control for SCP/_F option. Order at least one per project to program and control the occupancy sensor For additional information related to these accessories please visit www.hubbellcontrolsolutions.com. Options provided for use with integrated sensor, please view specification sheet ordering information table for details. ORDERING GUIDE (CONTINUED) CATALOG # –– Accessory Type Size Option SHD Shield MTG Mounting 1 Size 1 2 Size 2 3 Size 3 4 Size 4 HSS-90-B House Side Shield 90º Back HSS-90-F House Side Shield 90º Front HSS-90-S House Side Shield 90º Side HSS-270-BSS House Side Shield 270º Back/Side/Side HSS-270-FSS House Side Shield 270º Front/Side/Side HSS-270-FSB House Side Shield 270º Front/Side/Back HSS-360 House Side Shield 360º BC Back Light Control A Arm Mount for square pole/flat surface ASQU Universal Arm Mount for square pole AAU Adjustable Arm for pole mounting ADU Decorative upswept Arm RPA Round Pole Adapter MAF Mast Arm Fitter for 2-3/8" OD horizontal arm K Knuckle T Trunnion WB Wall Bracket (compatible with universal arm mounts) – Color BLS Black Gloss Smooth BLT Black Matte Textured DBS Dark Bronze Gloss Smooth DBT Dark Bronze Matte Textured GTT Graphite Matte Textured LGS Light Gray Gloss Smooth PSS Platinum Silver Smooth WHS White Gloss Smooth WHT White Matte Textured VGT Green Landscape Decorative LEG Legacy Colors Color Option CC Custom Color CONTROLS ™ Control Option Sensor Networkable Scheduling Occupancy Daylight Harvesting On/Off Control Programming Pair with Sensor Sensor Mounting Height NXWE –✔✔––✔✔–– NXSPW_F NXSM-P ✔✔✔✔✔✔–14ft, 40ft NXSP_F NXSM-P ––✔✔✔––14ft, 40ft BTSO12F BTSMP-OMNI ––✔✔✔Bluetooth –12ft BTS_F BTSMP ––✔✔–––14ft, 40ft ADD ––✔––✔–✔– ADT ––✔––✔–✔– 7PR –Paired with external control Paired with external control –Paired with external control Paired with external control –✔– 7PR-SC –––––––✔– 3PR –––––Paired with external control –✔– 3PR-SC –––––––✔– 3PR-TL ––––✔✔–✔– WIR –✔✔–✔✔Gateway –– WIRSC BTSMP ✔✔✔✔✔Gateway –14ft, 40ft – Accessory Type Option MSC Miscellaneous BIRD SPK Bird Spike Index Page3/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: (2) VP-2-320L-185-4K7-5QW-UNV- A3-*** (1) RSSB25-50B-1-B3-*** Notes: Type: S5 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 5/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DELIVERED LUMENS DATE:LOCATION: TYPE:PROJECT: CATALOG #: PROJECTED LUMEN MAINTENANCE Ambient Temp.0 25,000 *TM-21-11 36,000 50,000 100,000 Calculated L70 (Hours) 25°C / 77°F 1.00 0.97 0.96 0.95 0.91 408,000 40°C / 104°F 0.99 0.96 0.95 0.94 0.89 356,000 LUMINAIRE AMBIENT TEMPERATURE FACTOR (LATF) Ambient Temperature Lumen Multiplier 0°C 32°F 1.03 10°C 50°F 1.01 20°C 68°F 1.00 25°C 77°F 1.00 30°C 86°F 0.99 40°C 104°F 0.98 50°C 122°F 0.97 For delivered lumens, please see Lumens Data PDF on www.hubbelllighting.com Micro Strike Lumen Multiplier CCT 70 CRI 80 CRI 90 CRI 2700K –0.841 – 3000K 0.977 0.861 0.647 3500K –0.900 – 4000K 1 0.926 0.699 5000K 1 0.937 0.791 Monochromatic Amber Multiplier Amber 0.250 Strike Lumen Multiplier CCT 70 CRI 80 CRI 90 CRI 2700K –0.859 – 3000K 0.941 0.912 0.703 3500K –0.906 – 4000K 1 0.894 0.734 5000K 1 0.879 0.711 Monochromatic Amber Multiplier Amber 0.255 Index Page4/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: (2) VP-2-320L-185-4K7-5QW-UNV- A3-*** (1) RSSB25-50B-1-B3-*** Notes: Type: S5 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 6/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com ELECTRICAL DATA: MICRO STRIKE DATE:LOCATION: TYPE:PROJECT: CATALOG #: # OF LEDS 160 NOMINAL WATTAGE 35 50 75 100 115 135 160 SYSTEM POWER (W)34.9 50.5 72.1 97.2 111.9 132.2 157.8 INPUT VOLTAGE (V)CURRENT (Amps) 120 0.29 0.42 0.63 0.83 0.96 1.13 1.33 208 0.17 0.24 0.36 0.48 0.55 0.65 0.77 240 0.15 0.21 0.31 0.42 0.48 0.56 0.67 277 0.13 0.18 0.27 0.36 0.42 0.49 0.58 347 0.10 0.14 0.22 0.29 0.33 0.39 0.46 480 0.07 0.10 0.16 0.21 0.24 0.28 0.33 # OF LEDS 320 NOMINAL WATTAGE 145 170 185 210 235 255 315 SYSTEM POWER (W)150 166.8 185.7 216.2 240.9 261.5 312 INPUT VOLTAGE (V)CURRENT (Amps) 120 1.21 1.42 1.54 1.75 1.96 2.13 2.63 208 0.70 0.82 0.89 1.01 1.13 1.23 1.51 240 0.60 0.71 0.77 0.88 0.98 1.06 1.31 277 0.52 0.61 0.67 0.76 0.85 0.92 1.14 347 0.42 0.49 0.53 0.61 0.68 0.73 0.91 480 0.30 0.35 0.39 0.44 0.49 0.53 0.66 # OF LEDS 480 NOMINAL WATTAGE 285 320 340 390 425 470 SYSTEM POWER (W)286.2 316.7 338.4 392.2 423.2 468 INPUT VOLTAGE (V)CURRENT (Amps) 120 2.38 2.67 2.83 3.25 3.54 3.92 208 1.37 1.54 1.63 1.88 2.04 2.26 240 1.19 1.33 1.42 1.63 1.77 1.96 277 1.03 1.16 1.23 1.41 1.53 1.70 347 0.82 0.92 0.98 1.12 1.22 1.35 480 0.59 0.67 0.71 0.81 0.89 0.98 # OF LEDS 720 NOMINAL WATTAGE 435 475 515 565 600 SYSTEM POWER (W)429.3 475 519.1 565.2 599.9 INPUT VOLTAGE (V)CURRENT (Amps) 120 3.63 3.96 4.29 4.71 5.00 208 2.09 2.28 2.48 2.72 2.88 240 1.81 1.98 2.15 2.35 2.50 277 1.57 1.71 1.86 2.04 2.17 347 1.25 1.37 1.48 1.63 1.73 480 0.91 0.99 1.07 1.18 1.25 Index Page5/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: (2) VP-2-320L-185-4K7-5QW-UNV- A3-*** (1) RSSB25-50B-1-B3-*** Notes: Type: S5 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 7/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: ELECTRICAL DATA: STRIKE CATALOG #: # OF LEDS 36 NOMINAL WATTAGE 39 55 85 105 115 SYSTEM POWER (W)39.6 56.8 83.6 108.2 113.7 INPUT VOLTAGE (V)CURRENT (Amps) 120 0.33 0.46 0.71 0.88 1.00 208 0.19 0.26 0.41 0.50 0.58 240 0.16 0.23 0.35 0.44 0.50 277 0.14 0.20 0.31 0.38 0.43 347 0.11 0.16 0.24 0.30 0.35 480 0.08 0.11 0.18 0.22 0.25 # OF LEDS 72 NOMINAL WATTAGE 120 145 180 210 215 SYSTEM POWER (W)120.9 143.2 179.4 210.2 214.8 INPUT VOLTAGE (V)CURRENT (Amps) 120 0.96 1.21 1.50 1.75 2.00 208 0.55 0.70 0.87 1.01 1.15 240 0.48 0.60 0.75 0.88 1.00 277 0.42 0.52 0.65 0.76 0.87 347 0.33 0.42 0.52 0.61 0.69 480 0.24 0.30 0.38 0.44 0.50 # OF LEDS 108 NOMINAL WATTAGE 240 250 280 320 325 SYSTEM POWER (W)241.7 250.8 278.3 322.1 324.7 INPUT VOLTAGE (V)CURRENT (Amps) 120 1.79 2.08 2.33 2.71 3.04 208 1.03 1.20 1.35 1.56 1.75 240 0.90 1.04 1.17 1.35 1.52 277 0.78 0.90 1.01 1.17 1.32 347 0.62 0.72 0.81 0.94 1.05 480 0.45 0.52 0.58 0.68 0.76 # OF LEDS 162 NOMINAL WATTAGE 365 405 445 485 545 SYSTEM POWER (W)362.6 403.6 445.1 487.1 543.9 INPUT VOLTAGE (V)CURRENT (Amps) 120 2.67 3.38 3.71 4.04 4.54 208 1.54 1.95 2.14 2.33 2.62 240 1.33 1.69 1.85 2.02 2.27 277 1.16 1.46 1.61 1.75 1.97 347 0.92 1.17 1.28 1.40 1.57 480 0.67 0.84 0.93 1.01 1.14 Index Page6/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: (2) VP-2-320L-185-4K7-5QW-UNV- A3-*** (1) RSSB25-50B-1-B3-*** Notes: Type: S5 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 8/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: MICRO STRIKE PHOTOMETRY The following diagrams represent the general distribution options offered for this product. For detailed information on specific product configurations, see website photometric test reports. Type 2Type 2 Type 4F Type 4WType 4 Wide Type 5QMType 4F Type 5QMType 5QM Type 5QW Type 3Type 3 Index Page7/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: (2) VP-2-320L-185-4K7-5QW-UNV- A3-*** (1) RSSB25-50B-1-B3-*** Notes: Type: S5 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 9/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: OPTIC STRIKE PHOTOMETRY The following diagrams represent the general distribution options offered for this product. For detailed information on specific product configurations, see website photometric test reports. Type FR - Front Row/Auto OpticType FR – Front Row/Auto Optic Type 4Type 4 Forward Type 2Type 2 Type 4 WideType 4 Wide Type 5R (rectangular)Type 5R (rectangular) Type CornerType Corner Type 3Type 3 Type 5QMType 5QM Type 5W (round wide)Type 5W (round wide)Type TC (tennis court)Type TC Index Page8/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: (2) VP-2-320L-185-4K7-5QW-UNV- A3-*** (1) RSSB25-50B-1-B3-*** Notes: Type: S5 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 10/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: DIMENSIONS EPA VP1 (Size 1)VP2 (Size 2)VP3 (Size 3)VP4 (Size 4)Config. Single Fixture 0.454 0.555 0.655 0.698 Two at 180 0.908 1.110 1.310 1.396 Two at 90 0.583 0.711 0.857 0.948 Three at 90 1.037 1.266 1.512 1.646 Three at 120 0.943 1.155 1.392 1.680 Four at 90 1.166 1.422 1.714 1.896 Weight lbs kgs VP1 (Size 1)13.7 6.2 VP2 (Size 2)16.0 7.26 VP3 (Size 3)25.9 11.7 VP4 (Size 4)30.8 13.9 XX XX/XX/XX ECO-XXXX XXX XXX 12765432 D C B A 1276543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 11 SHTS Error: No reference Error: No reference * * * VP1-ASQ.dftjdietrich09/24/21 XXX 05/19/05 XXX 05/19/05 PV:1 14.373 5.000 16.756 21.756 3.477 SIZE 1 SIZE 3 SIZE 2 SIZE 4 5.00 16.76 14.37 21.76 3.48 XX XX/XX/XX ECO-XXXX XXX D C B A 128765432 12876543 This document contains confidential and proprietary information Lighting. Receipt or possession of this document does not conv rights to reproduce or disclose its contents, or to make, use , or anything it may disclose. Reproduction, disclosure, or use of the or its contents, without the specific written authorization of Hubb Lighting, may violate the intellectual property rights of Hubbell L UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. DESNRECORDDATEREV SHT 12 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 5.000 21.877 14.373 26.876 3.477 5.00 21.88 14.37 26.88 3.48 XX XX/XX/XX ECO-XXXX XXX XXX 12765432 D C B A 1276543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 11 SHTS Error: No reference Error: No reference * * * VP3-ASQ.dftjdietrich09/24/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.500 16.113 34.476 3.477 26.976 XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 11 SHTS Error: No reference Error: No reference * * * VP4-ASQ.dftjdietrich09/24/21 XXX 05/19/05 XXX 05/19/05 PV:1 19.622 7.500 27.980 35.476 3.477 7.50 7.50 3.48 3.48 26.97 34.47 27.98 19.62 35.48 Index Page9/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: (2) VP-2-320L-185-4K7-5QW-UNV- A3-*** (1) RSSB25-50B-1-B3-*** Notes: Type: S5 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 11/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: MOUNTING ASQ–STRAIGHT ARM MOUNT Fixture ships with integral arm for ease of installation. Compatible with Hubbell Outdoor B3 drill pattern. For round poles add applicable suffix (2/3/4/5) ASQU–UNIVERSAL ARM MOUNT Universal mounting block for ease of installation. Compatible with drill patterns from 2.5" to 4.5" and Hubbell drill pattern S2. For round poles add applicable suffix (2/3/4/5) AAU–ADJUSTABLE ARM FOR POLE MOUNTING Rotatable arm mounts directly to pole. Compatible with drill patterns from 2.5" to 4.5" and Hubbell drill pattern S2. For round poles add applicable suffix (2/3/4/5). Rotatable in 15˚ aiming angle increments. Micro Strike configurations have a 45° aiming limitation. Strike configurations have a 30° aiming limitation. ADU–DECORATIVE UPSWEPT ARM Upswept Arm compatible with drill patterns from 2.5" to 4.5". For round poles add applicable suffix (2/3/4/5). MAF–MAST ARM FITTER Fits 2-3/8" OD horizontal tenons. K–KNUCKLE Knuckle mount 15˚ aiming angle increments for precise aiming and control, fits 2-3/8" tenons or pipes. Micro Strike configurations have a 45° aiming limitation. Strike configurations have a 30° aiming limitation. T–TRUNNION Trunnion for surface and crossarm mounting using (1) 3/4" or (2) 1/2" size through bolts. Micro Strike configurations have a 45° aiming limitation. Strike configurations have a 30° aiming limitation. XX XX/XX/XX ECO-XXXX XXX XXX 12765432 D C B A 1276543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 D C B A 8 7 6 5 4 8 7 6 5 4 7.762 7.500 7.500 9.300 7.731 D C B A 8 7 6 5 4 3 8 7 6 5 4 3 UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE CRITICAL DIMENSIONS THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO: jdietrich 09/16 XXX 05/19 XXX 05/19 7.762 7.500 7.500 9.300 7.731 XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 8.3" 7.5 " 7.5 " 5.0" 7.8 " XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 7.7 " WM–WALL MOUNT Compatible with universal arm mount, adjustable arm mount, and decorative arm mount. The WA option uses the same wall bracket but replaces the decorative arm with an adjustable arm. XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 22 SHTS Error: No reference Error: No reference * * * VP2-ASQ.dftjdietrich09/16/21 XXX 05/19/05 XXX 05/19/05 PV:1 7.762 7.500 7.500 9.300 7.731 6.260 5.000 9.3" XX XX/XX/XX ECO-XXXX XXX XXX D C B A 128765432 D C B A 12876543 This document contains confidential and proprietary information of HubbellLighting. Receipt or possession of this document does not convey anyrights to reproduce or disclose its contents, or to make, use , or sellanything it may disclose. Reproduction, disclosure, or use of the documentor its contents, without the specific written authorization of HubbellLighting, may violate the intellectual property rights of Hubbell Lighting. UNSPECIFED TOLERANCES: INCHESX.X=u0.1 X.XX=u0.03 X.XXX=u0.010FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v CRITICAL DIMENSIONS PART NO: REV. FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN BY: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO:SCALE DSIZE DRAWING NO. CHCKDESNRECORDDATEREV SHT 11 SHTS Error: No reference Error: No reference * * * VP1-ASQ.dftjdietrich09/24/21 XXX 05/19/05 XXX 05/19/05 PV:1 14.373 5.000 16.756 21.756 3.477 5.0" Index Page10/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: (2) VP-2-320L-185-4K7-5QW-UNV- A3-*** (1) RSSB25-50B-1-B3-*** Notes: Type: S5 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 12/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: ADDITIONAL INFORMATION (CONTINUED) HOUSE SIDE SHIELD FIELD INSTALL ACCESSORIES Instruction Sheet: 93158127_P1Hubbell Lighting701 Millennium Blvd.Greenville, SC 29607 Technical Support: (864) 678-1000Fax: (864) 898-1065www.hubbell.com VPR2x HSS-90-B-xx VPR2x HSS-90-S-xx VPR2x HSS-90-S-xx VPR2x HSS-270-BSS-xx VPR2x HSS-270-FSS-xx VPR2x HSS-270-FSB-xx VPR2x HSS-270-FSB-xx VPR2x HSS-360-xx VPR2x HSS-90-F-xx VPR2 HOUSE SIDE SHIELD ACCESSORY NOMENCLATURE:"x" denotes size 1, 2, 3, or 4"xx" denotes color selection (DBT, GTT,WHT, etc.) Index Page11/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: (2) VP-2-320L-185-4K7-5QW-UNV- A3-*** (1) RSSB25-50B-1-B3-*** Notes: Type: S5 INDY22-104626 VIPER Area/Site VIPER LUMINAIRE Page 13/13 Rev. 01/12/22 BEA-VIPER-S-SPEC © 2022 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com DATE:LOCATION: TYPE:PROJECT: CATALOG #: ADDITIONAL INFORMATION (CONTINUED) PROGRAMMED CONTROLS ADD-AutoDim Timer Based Options • Light delay options from 1-9 hours after the light is turned on to dim the light by 10-100%. To return the luminaire to its original light level there are dim return options from 1-9 hours after the light has been dimmed previously. EX: ADD-6-5-R6 ADT-AutoDim Time of Day Based Option • Light delay options from 1AM-9PM after the light is turned on to dim the light by 10-100%. To return the luminaire to its original light level there are dim return options from 1AM-9PM after the light has been dimmed previously. EX: ADT-6-5-R6 ADD Control Options Configurations Choices Example Choice Picked Auto-Dim Options 1-9 Hours 6 - Delay 6 hours Auto-Dim Brightness 10-100% Brightness 5 - Dim to 50% brightness Auto-Dim Return Delay 0-9 Hours R6 - Return to full output after 6 hours ADD Control Options Configurations Choices Example Choice Picked Auto-Dim Options 12-3 AM and 6-11 PM 6 - Dim at 6PM Auto-Dim Brightness 10-100% Brightness 5 - Dim to 50% Auto-Dim Return 12-6 AM and 9-11P R6 - Return to full output at 6AM USE OF TRADEMARKS AND TRADE NAMES All product and company names, logos and product identifies are trademarks ™ or registered trademarks ® of Hubbell Lighting, Inc. or their respective owners. Use of them does not necessarily imply any affiliation with or endorsement by such respective owners. Index Page12/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: (2) VP-2-320L-185-4K7-5QW-UNV- A3-*** (1) RSSB25-50B-1-B3-*** Notes: Type: S5 INDY22-104626 Beacon Products • 701 Millennium Blvd, Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2020 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA RSS-B POLES-SPEC JuLy 28, 2020 8:45 AM APPLICATIONS • Lighting installations for side and top mounting of luminaires with effective projected area (EPA) not exceeding maximum allowable loading of the specified pole in its installed geographic location CONSTRUCTION • SHAFT: One-piece straight steel with round cross section, Minimum yield of 46,000 psi (ASTM-A500, Grade C); Longitudinal weld seam to appear flush in shaft wall; Steel base plate with axial bolt circle slots welded flush to pole shaft having minimum yield of 36,000 psi (ASTM A36) • BASE COVER: Two-piece square aluminum base cover included standard • POLE CAP: Pole shaft supplied with removable cover when applicable; Tenon and post-top configurations also available • HAND HOLE: Rectangular 3x5 steel hand hole frame (2.38” x 4.38” opening); Mounting provisions for grounding lug located behind gasketed cover • ANCHOR BOLTS: Four galvanized anchor bolts provided per pole with minimum yield of 55,000 psi (ASTM F1554). Galvanized hardware with two washers and two nuts per bolt for leveling FINISH • Durable thermoset polyester powder coat paint finish with nominal 3.0 mil thickness • Powder paint prime applied over “white metal” steel substrate cleaned via mechanical shot blast method • Decorative finish coat available in multiple standard colors; Custom colors available; RAL number preferable; RSS-B SERIES POLES ROUND STRAIGHT STEEL Overall Height 10' - 30' Handhole 18" Cat.# Approvals Job Type BASE DETAILPOLE CAP TENON BASE COVER Bolt Circle (Outer) Bolt Circle (Inner) Bolt Square (Outer) Bolt Square (Inner) 270˚90˚ 180˚ 0˚ Handhole ORDERING INFORMATION SERIES RSS-B Round Straight Steel Pole Beacon RSS B 25 40 A/B/C 2L BLTB2 UL MOUNTING ORIENTATION MOUNTING 1 Single arm mount 2 Two fixtures at 180˚ 2L Two fixtures at 90˚ 3T Three fixtures at 90˚ 3Y Three fixtures at 120˚ 4 Four fixtures at 90˚ TA Tenon (2.375” OD) TB Tenon (2.875” OD) TC Tenon (3.5” OD) OT No drilling (includes pole cap) HEIGHT Reference page 2 Ordering matrix SHAFT Reference page 2 Ordering matrix THICKNESS Reference page 2 Ordering matrix OPTIONS GFI1 20 Amp GFCI Receptacle and Cover EHH1 Extra Handhole C051 .5” Coupling C071 .75” Coupling C201 2” Coupling MPB1 Mid-pole Luminaire Bracket VM2 2nd mode vibration damper LAB Less Anchor Bolts UL UL Certified RBC Round Base Cover ORDERING EXAMPLE: Reference page 2 for available configurations ACCESSORIES- Order Separately Catalog Number Description VM2SXX 2nd mode vibration damper 1 Specify option location using logic found on page 2 (Option Orientation) DRILL PATTERN B1 Cruzer, “AM” arm B3 2 bolt (2-1/2” spacing), Viper “A” arm S2 2 bolt (3-1/2” spacing), Viper “AD” arm FINISH BLT Black Matte Textured BLS Black Gloss Smooth DBT Dark Bronze Matte Textured DBS Dark Bronze Gloss Smooth GTT Graphite Matte Textured LGS Light Grey Gloss Smooth PSS Platinum Silver Smooth WHT White Matte Textured WHS White Gloss Smooth VGT Verde Green Textured Color Option CC Custom Color 22 50 Index Page13/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: (2) VP-2-320L-185-4K7-5QW-UNV- A3-*** (1) RSSB25-50B-1-B3-*** Notes: Type: S5 INDY22-104626 Beacon Products • 701 Millennium Blvd, Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2020 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA RSS-B POLES-SPEC JuLy 28, 2020 8:45 AM Overall Height 10'-30' 18" TENON Bolt Circle (Outer) Bolt Circle (Inner) Bolt Square (Outer) Bolt Square (Inner) Height of option in feet BASE COVER 270˚90˚ 180˚ 0˚ Handhole VIBRATION DAMPER 2ND MODE ORDERING INFORMATION Cont. NOTE Factory supplied template must be used when setting anchor bolts. Beacon Products will deny any claim for incorrect anchorage placement resulting from failure to use factory supplied template and anchor bolts. For more information about pole vibration and vibration dampers, please consult http://cdn.beaconproducts.com/content/products/literature/literature_files/Pole_Wind_Induced_Flyer_HLOI0022.pdf Due to our continued efforts to improve our products, product specifications are subject to change without notice. Follow the logic below when ordering location specific options. For each option, include its orientation (in degrees) and its height (in feet). Example: Option C07 should be ordered as: RSS-B-20-40-A-TA-DB-CO5-0-15 (.5” coupling on the handhole/arm side of pole, 15 feet up from the pole base) 1’ spacing required between option. Consult factory for other configurations. OPTION ORIENTATIONGFI – 20 AMP GFCI RECEPTACLE & COVER EHH - EXTRAHANDHOLE C05 - C07 - C20 -COUPLING MPB - MID POLE BRACKET VM2 - VIBRATION DAMPER 2ND MODE VM2SXX - VIBRATION DAMPER 2ND MODE Anchor Base Detail Bolt Circle Bolt Slots/Holes 0°-HandholeBolt Square 270°Arm 1 90° Arm 2 180° As viewed from top of pole. Bolt Circle Bolt Slots/Holes 0°-HandholeBolt Square 270°Arm 1 90° Arm 2 180° As viewed from top of pole. Provision for Grounding 1/2” - 14 NPSC Threads 3/4” - 14 NPSC Threads 2” -11.5 NPSC Threads Round Steel Pole Attachment stub 5” long welded to pole Arm, 3” Sq. x 13.5” long ships separately 2” pipe tenon 4.25” tall Round Steel Pole Standard hand hole frame Adapter plate Gasket 20 AMP GFCI Wet Locations In-use Cover Overall Height 10'-30' 18" TENON Bolt Circle (Outer) Bolt Circle (Inner) Bolt Square (Outer) Bolt Square (Inner) BASE COVER 270˚90˚ 180˚ 0˚ Handhole Factory installed, internal damper designed to alter pole resonance to reduce movement and material fatigue caused by 2nd mode vibration. Field installed, internal damper designed to alter pole resonance to reduce movement and material fatigue caused by 2nd mode vibration. VM2S08 – 8' VM2S12 – 12' VM2S16 – 16' VM2S20 – 20' VM2S24 – 24' Catalog Number Height Nominal Shaft Dimensions Wall Thickness Bolt Circle (suggested) Bolt Circle (range) Bolt Square (range) Base Plate Square Base Plate Thickness Anchor bolt size Bolt Projection Pole weightFeetMeters RSS-B-10-40-A 10 3.0 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 52 RSS-B-12-40-A 12 3.7 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 62 RSS-B-14-40-A 14 4.3 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 72 RSS-B-16-40-A 16 4.9 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 83 RSS-B-18-40-A 18 5.5 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 93 RSS-B-20-40-A 20 6.1 4" round 0.125”9”7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 103 RSS-B-10-40-B 10 3.0 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 77 RSS-B-12-40-B 12 3.7 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 92 RSS-B-14-40-B 14 4.3 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 107 RSS-B-16-40-B 16 4.9 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 122 RSS-B-18-40-B 18 5.5 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 138 RSS-B-20-40-B 20 6.1 4" round 0.188"9"7.5" - 10"5.30" - 7.07"9"0.75 3/4" x 30" x 3"3.5 153 RSS-B-10-50-B 10 3.0 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 97 RSS-B-12-50-B 12 3.7 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 116 RSS-B-14-50-B 14 4.3 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 135 RSS-B-16-50-B 16 4.9 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 155 RSS-B-18-50-B 18 5.5 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 174 RSS-B-20-50-B 20 6.1 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 193 RSS-B-25-50-B 25 7.6 5" round 0.188"11"8.0" - 11"5.66" - 7.78"10.25 1.0 1" x 36" x 4"4.5 242 RSS-B-20-60-C 20 6.1 6" round 0.250"11"9.0" - 11"6.36" - 7.78"10.25 1.0 1" x 36" x 4"4.5 307 RSS-B-25-60-C 25 7.6 6" round 0.250"11"9.0" - 11"6.36" - 7.78"10.25 1.0 1" x 36" x 4"4.5 384 RSS-B-30-60-C 30 9.1 6" round 0.250"11"9.0" - 11"6.36" - 7.78"10.25 1.0 1" x 36" x 4"4.5 461 VIBRATION DAMPER 2ND MODE Index Page14/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: (2) VP-2-320L-185-4K7-5QW-UNV- A3-*** (1) RSSB25-50B-1-B3-*** Notes: Type: S5 INDY22-104626 Beacon Products • 701 Millennium Blvd, Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2020 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA RSS-B POLES-SPEC JuLy 28, 2020 8:45 AM ASCE7-05 WIND MAP FLORIDA REGION WIND MAP 180 180 170 170 160 160 150 150 140 140140150 140 150 130 120 115 115 120 130 • Florida region wind map above is based upon 3-second gust winds and the 2017 Florida Building Code HAWAII – 105 mph PUERTO RICO – 145 mph NOTES: • Values are based on 50 year mean recurrence interval 30’ above grade. • Hawaii has an 105 mph wind velocity. • Puerto Rico has a 125 mph wind velocity. • Caution must be exercised in determining wind velocities in special wind areas such as: Mountainous Regions Areas surrounding the Great Lakes or other large bodies of water or open land. Areas subject to extreme wind conditions, such as hurricanes, typhoons, cyclones, and tornadoes. Areas adjacent to airports. Any specific area with a known or suspected abnormally high intermittent wind condition caused by geography, adjacent structures, or other specific local conditions that may not be recorded in National Weather Service records. • Allowable pole EPA for jobsite wind conditions must be equal to or greater than fixture EPA. Responsibility lies with the specifier for correct pole selection based on AASHTO wind map and job location. • The Wind Map is intended only as a general guide. Always consult local authorities to determine maximum wind velocities, gusting and unique wind conditions for each specific application. • CAUTION: Wind speeds and listed EPAs are for ground mounted installations. Poles mounted on structures (such as bridges and buildings) must consider vibration and coefficient of height factors beyond this general guide. Consult AASHTO standards. • Extreme Wind Events: Hurricanes, Typhoons, Cyclones, or Tornadoes expose poles to flying debris, wind shear, and other unpredictable aerodynamic forces not indicated by the wind velocity ratings. • Pole Strength Limited Warranty: Standard, unmodified Kim lighting Poles installed as recommended, undamaged by corrosion, or lack of maintenance, shall withstand steady wind conditions as provided on page 2 (Allowable Pole EPA). Installation of poles without luminaires, or attachment of any unauthorized accessories to poles shall void this warranty. 85 90 90100110 120 130 130 140 140 140 150 150 14013012011010090 Special Wind Region(Consult Local Authorities) 90 Wind Map United States and Canada Florida Building Code 2017 EPA Load Rating - 3 second gust wind speeds Catalog Number 115 120 130 140 150 160 170 180 RSS-B-10-40-A 25.0 23..5 20.0 17.0 14.5 12.5 11.0 10.0 RSS-B-12-40-A 21.0 19.0 16.0 13.5 11.5 9.5 9.0 8.0 RSS-B-14-40-A 17.5 15.7 13.0 10.8 9.0 7.5 7.0 6.5 RSS-B-16-40-A 14.2 13.0 10.5 8.5 7.0 5.8 5.0 4.5 RSS-B-18-40-A 11.6 10.4 8.2 6.8 5.4 4.4 4.0 3.6 RSS-B-20-40-A 9.5 8.4 6.5 5.2 4.0 3.0 2.8 2.5 RSS-B-10-40-B 25.0 25.0 25.0 22.0 19.0 16.5 15.2 13.4 RSS-B-12-40-B 25.0 25.0 20.8 17.6 15.1 13.0 12.0 10.6 RSS-B-14-40-B 22.5 20.4 17.2 14.4 12.2 10.4 10.0 8.8 RSS-B-16-40-B 18.9 17.0 14.1 11.7 9.8 8.2 7.5 7.0 RSS-B-18-40-B 15.6 14.1 11.5 9.4 7.7 6.4 6.0 5.7 RSS-B-20-40-B 13.0 11.6 9.3 7.5 6.0 4.8 4.0 3.5 RSS-B-10-50-B 25.0 25.0 25.0 25.0 25.0 23.6 20.8 18.4 RSS-B-12-50-B 25.0 25.0 25.0 25.0 22.2 19.3 16.8 14.8 RSS-B-14-50-B 25.0 25.0 23.9 21.5 18.4 15.9 13.8 12.1 RSS-B-16-50-B 25.0 23.8 19.6 18.0 15.4 13.2 11.4 9.9 RSS-B-18-50-B 21.8 19.6 16.1 15.1 12.8 10.8 9.3 8.0 RSS-B-20-50-B 18.2 16.4 14.1 12.7 10.7 9.0 7.7 6.5 RSS-B-25-50-B 11.7 10.2 9.4 8.4 6.8 5.6 4.5 3.7 RSS-B-20-60-C 25.0 25.0 25.0 22.1 18.8 16.1 13.9 12.0 RSS-B-25-60-C 24.7 22.4 18.4 15.3 12.8 10.8 9.1 7.6 RSS-B-30-60-C 18.2 16.3 13.2 10.7 8.7 7.0 5.7 4.5 ASCE 7-05 wind map EPA Load Rating - 3 second gust wind speeds Catalog Number 85 90 100 110 120 105 145 RSS-B-10-40-A 21.0 18.7 15.0 12.2 10.1 13.5 6.8 RSS-B-12-40-A 16.8 14.8 11.8 9.5 7.7 10.5 5.1 RSS-B-14-40-A 13.6 12.0 9.4 7.4 5.9 8.3 3.9 RSS-B-16-40-A 11.1 9.7 7.5 5.8 4.5 6.6 2.9 RSS-B-18-40-A 9.0 7.8 5.8 4.4 3.3 5.1 2 RSS-B-20-40-A 7.2 6.2 4.5 3.1 2.2 3.8 1.2 RSS-B-10-40-B 25.0 25.0 22.4 18.4 15.3 20.2 10.4 RSS-B-12-40-B 25.0 22.3 17.9 14.5 12.0 16.1 8.1 RSS-B-14-40-B 20.6 18.3 14.6 11.7 9.6 13 6.4 RSS-B-16-40-B 17.2 15.2 12.0 9.5 7.7 10.7 5.1 RSS-B-18-40-B 14.3 12.6 9.8 7.6 6.1 8.6 3.9 RSS-B-20-40-B 11.8 10.3 7.9 6.0 4.7 6.9 2.9 RSS-B-10-50-B 25.0 25.0 25.0 25.0 25.0 25.0 17.7 RSS-B-12-50-B 25.0 25.0 25.0 24.8 20.8 25.0 14.3 RSS-B-14-50-B 25.0 25.0 24.7 20.5 17.2 22.4 11.7 RSS-B-16-50-B 25.0 25.0 20.7 17.1 14.3 18.8 9.7 RSS-B-18-50-B 24.5 21.6 17.3 14.3 11.9 15.7 8.0 RSS-B-20-50-B 20.6 18.1 14.4 11.8 9.8 13.0 6.5 RSS-B-25-50-B 13.6 11.7 9.1 7.3 6.0 8.1 3.8 RSS-B-20-60-C 25.0 25.0 25.0 25.0 21.5 25.0 14.8 RSS-B-25-60-C 25.0 25.0 21.9 18.0 15.0 19.8 10.1 RSS-B-30-60-C 21.8 19.4 15.6 12.7 10.6 14.1 6.9 120 110 100 90 90 100 110 120 130 130 130 130 ALASKA REGION WIND MAP *PRINTED WITH PERMISSION FROM ASCE Index Page15/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: (2) VP-2-320L-185-4K7-5QW-UNV- A3-*** (1) RSSB25-50B-1-B3-*** Notes: Type: S5 INDY22-104626 Beacon Products • 701 Millennium Blvd, Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2020 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA RSS-B POLES-SPEC JuLy 28, 2020 8:45 AM • Allowable EPA, to determine max pole loading weight, multiply allowable EPA by 30 lbs. • The tables for allowable pole EPA are based on the ASCE 7-05 Wind Map or the Florida Region Wind Map for the 2010 Florida Building Code. The Wind Maps are intended only as a general guide and cannot be used in conjunction with other maps. Always consult local authorities to determine maximum wind velocities, gusting and unique wind conditions for each specific application • Allowable pole EPA for jobsite wind conditions must be equal to or greater than the total EPA for fixtures, arms, and accessories to be assembled to the pole. Responsibility lies with the specifier for correct pole selection. Installation of poles without luminaires or attachment of any unauthorized accessories to poles is discouraged and shall void the manufacturer’s warranty • Wind speeds and listed EPAs are for ground mounted installations. Poles mounted on structures (such as bridges and buildings) must consider vibration and coefficient of height factors beyond this general guide; Consult local and federal standards • Wind Induced Vibration brought on by steady, unidirectional winds and other unpredictable aerodynamic forces are not included in wind velocity ratings. Consult Hubbell Lighting’s Pole Vibration Application Guide for environmental risk factors and design considerations. http://cdn.beaconproducts.com/content/products/literature/literature_files/Pole_Wind_Induced_Flyer_HLOI0022.pdf • Extreme Wind Events like, Hurricanes, Typhoons, Cyclones, or Tornadoes may expose poles to flying debris, wind shear or other detrimental effects not included in wind velocity ratings Due to our continued efforts to improve our products, product specifications are subject to change without notice. Wind-speed Website disclaimer: Hubbell Lighting has no connection to the linked website and makes no representations as to its accuracy. While the information presented on this third-party website provides a useful starting point for analyzing wind conditions, Hubbell Lighting has not verified any of the information on this third party website and assumes no responsibility or liability for its accuracy. The material presented in the windspeed website should not be used or relied upon for any specific application without competent examination and verification of its accuracy, suitability and applicability by engineers or other licensed professionals. Hubbell Lighting Inc. does not intend that the use of this information replace the sound judgment of such competent professionals, having experience and knowledge in the field of practice, nor to substitute for the standard of care required of such professionals in interpreting and applying the results of the windspeed report provided by this website. Users of the information from this third party website assume all liability arising from such use. Use of the output of these referenced websites do not imply approval by the governing building code bodies responsible for building code approval and interpretation for the building site described by latitude/longitude location in the windspeed report. http://windspeed.atcouncil.org NOTES Index Page16/16Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDM/D/48L-85/4K7/4F/UNV/*** Notes: Type: WP1 INDY22-104626 currentlighting.com/kimlighting © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 1 of 9 Rev 08/02/22 kl_wdm_spec_R03 WDM WALL MOUNTED FEATURES • -5° to +10° tilt adjustment • High performance optics deliver up to 16,000 lumens • up or down mountable without modification • Programmable occupancy sensor (dimming) • NX Lighting Controls • 130+ lumens per watt • UL/cUL listed for wet locations, IP66 Listed. DATE:LOCATION: TYPE:PROJECT: SPECIFICATIONS CONTROL TECHNOLOGY KEY DATA Lumen Range 5,950–16,000 Wattage Range 54–131 Efficacy Range (LPW)97–145 Reported Life (Hours)L70/60,000 Weight 35 lbs/15.87 kg CATALOG #: Wall Director Medium RELATED PRODUCTS Wall Director Small Downlight only, 3000K and warmer CCTs CONSTRUCTION • Optical housing is a one-piece, die-cast low copper (<0.6%) aluminum alloy with integral heat sink. The housing rotates against mounting arm housing to provide -5° to 10° of adjustment with degree markers label. At 0° adjustment, lens is totally concealed from view above horizontal with fixture mounted in the downward position. • Mounting arm housing is one-piece die- cast, low copper (<0.6%) aluminum alloy with provisions for tilt mechanism. Mounting arm fastens to the mounting plate with keyhole slots freeing both hands for securing and wiring. One stainless steel socket-head screw on the tilt mechanism frees the optical housing to rotate for aiming. Tightening the screws locks the housing and lens frame together with sealing provided by a silicone gasket. For visual aiming, adjustment may be accomplished with the fixture on. • Lens Frame is a one-piece, die-cast low copper (<0.6%) aluminum alloy with integral cooling fins to dissipate driver thermal. • Finish: fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) polyester powdercoat • Bracketry and hardware shall be stainless steel OPTICS • LEDs mount to a metal printed circuit board assembly (MCPCB). • Optical lenses are clear injection molded PMMA acrylic. • Secondary lens is impact resistant 1/8” tempered glass with anti-reflective coating. ELECTRICAL • Universal voltage, 120 through 277V with a ±10% tolerance. Driver is Underwriters Laboratories listed. • High voltage configurations, 347/480. Driver has a 0-10V dimming interface for multi-level illumination options. Driver is Underwriters Laboratories listed. • "Thermal Shield”, secondary side, thermistor provides protection for the sustainable life of LED module and electronic components. • Drivers have a greater than a 0.9 power factor, less than 20% harmonic distortion, and be suitable for operation in -40°C to 40°C ambient environments. • Luminaire shall be capable of operating at 100% brightness in a 40°C environment. Both driver and optical array have integral thermal protection that will dim the luminaire upon detection of temperatures in excess of 85°C. • Modular wiring harness in the service area provides user access to the dimming circuitry. INSTALLATION • Junction box (by Others): Standard with steel, quick-mount junction box plate that mounts directly to 4” J-Box. • Mounting plate is stainless steel and features a one-piece EPDM gasket on back side of plate to firmly seal fixture to wall surface, forbidding entry of moisture and particulates. • Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious personal injury. SERVICING • Housing should hang freely in an open service position for inspection of primary wire connections. Once in service position, the housing can be removed for service by sliding the assembly to the left (for down mounting) or to the right (for up mounting) and disconnecting the wiring plugs. • Driver assembly shall be mounted to a prewired internal tray with quick disconnects for removal. (Specifications continued on page 3) IK07 Index Page1/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDM/D/48L-85/4K7/4F/UNV/*** Notes: Type: WP1 INDY22-104626 currentlighting.com/kimlighting © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 2 of 9 Rev 08/02/22 kl_wdm_spec_R03 WDM WALL MOUNTED ORDERING GUIDE HOUSING WDM Model Mounting Source Wattage Light Engine Distribution WDM WallDirector Medium D Down U 1 Up 48L 48 LEDs 1 Type I 2 Type II 3 Type III 4W Type IV Wide 4F Type IV Forward WG 2 Wall Graze SP Spot/Column FTD 2 Forward Throw Diffuse WTD 2 Wide Throw Diffuse Voltage Fixture Finish Control Options Options Control Accessories UNV 120-277V 347 3 347V 480 3 480V PC 3 Button Photocell SCP-8F 3, 4, 5, 9 Programmable Occ. Sensor (<9' height) SCP-20F 3, 4, 5, 9 Programmable Occ. Sensor (<9' - 20' height) 2DR Dual Drivers 2PF Dual Power Feeds NXWS16F 1 ,4 NX Networked Wireless Enabled Integral NXSMP2-LMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming NXW 4, 5 NX Networked Wireless Radio Module NXRM2 and Bluetooth Programming, without Sensor EM 3 Integral Battery Backup Unit (8W) SF Single Fuse & Fuse holder DF Double Fuse & Fuse holder SCM1 1/2" Surface Conduit Mount SCM2 3/4" Surface Conduit Mount SCPREMOTE SCP configuration tool Example: WDM-D-48L-55-3K7-1-UNV-BLS-PC-EM CATALOG # 55 55 Watts, 6000 lm 65 65 Watts, 8000 lm 85 85 Watts, 10000 lm 105 105 Watts, 12000 lm 130 130 Watts, 14000 lm DATE:LOCATION: TYPE:PROJECT: CATALOG #: AM 6 Amber-595nm Peak 3K7 3000K/70CRI 3K8 3000K/80CRI 4K7 4000K/70CRI 4K8 4000K/80CRI 5K7 5000K/70CRI Notes: 1 Not available with EM option or with SCP, NXWS16F sensor options. 2 WG, FTD, and WTD come with a diffused lens 3 Not available with other control options 4 Input voltage 120-347V 5 Not available in 480V 6 Turtle friendly 8 Consult factory for custom color, marine and corrosive finish options 9 SCPREMOTE SCP configuration tool needed Microsoft, Encarta, MSN, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. BLS Black Gloss Smooth BLT Black Matte Textured DBS Dark Bronze Gloss Smooth DBT Dark Bronze Matte Textured GTT Graphite Matte Textured LGS Light Grey Gloss Smooth LGT Light Grey Matte Textured PSS Platinum Silver Gloss Smooth VGT Verde Green Matte Textured WHS White Gloss Smooth WHT White Matte Textured Color Option CC 8 Custom Color Index Page2/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDM/D/48L-85/4K7/4F/UNV/*** Notes: Type: WP1 INDY22-104626 currentlighting.com/kimlighting © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 3 of 9 Rev 08/02/22 kl_wdm_spec_R03 WDM WALL MOUNTED • Optional factory programmed dimming profile. • Surge protection: 10,000k in parallel, 20,000k in series. • Wiring: No. 18AWM rated 90°C, wet rating. DIMMING • Dimming range from 100% to 10% through the use of the standard 0-10V interface on the programmable driver. • Modular wiring harness in the service area provides user access to the dimming circuitry. • Dimming circuitry compatible with 0-10V, user-defined control devices. • Optional factory programmed dimming profile. BUTTON PHOTOCELL • Optional universal voltage (120-277V) button photocontrol for dusk to dawn energy savings. Photocontrol is factory installed inside the housing with a fully gasketed sensor on the side wall. For multiple fixture mountings, one fixture is supplied with a photocell to operate the others. NX LIGHTING CONTROLS • NX lighting controls platform utilizes a Distributed Network Architecture (DNA) that connects intelligent devices including luminaires, controllers, panels, occupancy sensors, photocells, wall switches and dimmers, creating a system with an unmatched level of reliability, scalability and simplicity OPTIONAL FUSING: • SF for 120, 277, and 347 Line volts • DF for 208, 240, and 480 Line volts • Hight temperature fuse holders factory installed inside the fixture housing. • Fuse is included. OPTIONAL BACKUP BATTERY • Integral battery backup provides emergency path of egress lighting for the required 90 minutes for 0°C ambient environments. CAUTION • Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious personal injury. CERTIFICATIONS AND LISTINGS • Listed to UL1598 and CSA C22.2#250.0- 24 for wet locations and 40˚C ambient temperatures • IEC 66262 Mechanical Impact Code IK08 • IP66 certified • RoHS compliant • This product qualifies as a “designated country construction material” per FAR 52.225-11 Buy American-Construction Materials under Trade Agreements effective 6/06/2020. See Buy American Solutions. WARRANTY • 5 year warranty SPECIFICATIONS (CONTINUED) FixtureHousing 30 mA Max Pink Dimming Lead (-) Standard Input Black (+) White (-) Green (GND) Purple Dimming Lead (+) (L) (N) ELECTRICAL (CONTINUED) Index Page3/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDM/D/48L-85/4K7/4F/UNV/*** Notes: Type: WP1 INDY22-104626 currentlighting.com/kimlighting © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 4 of 9 Rev 08/02/22 kl_wdm_spec_R03 WDM WALL MOUNTED DATE:LOCATION: TYPE:PROJECT: CATALOG #: DIMENSIONS DELIVERED LUMENS 5.7” 11.6” 5.7” 8.9” (226 mm) (145 mm) (295 mm) (145 mm) 18.0” 11.3” (457 mm) 18.0” (457 mm) (145 mm) Above / Below (Depending on mounting) Front Side BackWeight: 35 lbs LEDs # Drive Current Lumens Package Nominal Watts Lens Options Distribution 3000K 70CRI 4000K 70CRI 5000K 70CRI Lumen BUG Rating lm/w Lumen BUG Rating lm/w Lumen BUG Rating lm/w B U G B U G B U G 48L 350mA 6,000 55 Clear 1 7162 1 0 1 132 7342 1 0 1 135 7426 1 0 1 137 2 6782 1 0 1 125 6953 1 0 1 128 7032 1 0 1 130 3 6896 1 0 2 127 7070 1 0 2 130 7151 1 0 2 132 4F 6766 1 0 2 125 6937 1 0 2 128 7016 1 0 2 129 4W 6802 1 0 2 125 6973 1 0 2 128 7053 1 0 2 130 SP 7594 4 0 1 140 7785 4 0 1 143 7874 4 0 1 145 Diffused WG 6576 3 0 1 121 6741 3 0 1 124 6818 3 0 1 126 FTD 5950 2 0 1 110 6100 2 0 1 112 6170 2 0 1 114 WTD 6439 2 0 1 119 6601 2 0 1 122 6677 2 0 1 123 425mA 8,000 65 Clear 1 8775 1 0 1 129 8996 1 0 1 132 9099 1 0 1 134 2 8309 1 0 2 122 8518 1 0 2 125 8616 1 0 2 127 3 8450 1 0 2 124 8662 1 0 2 127 8761 1 0 2 129 4F 8290 1 0 2 122 8499 1 0 2 125 8596 1 0 2 126 4W 8334 1 0 2 123 8544 1 0 2 126 8641 1 0 2 127 SP 9304 4 0 1 137 9538 4 0 1 140 9647 4 0 1 142 Diffused WG 8057 3 0 1 118 8260 3 0 1 121 8354 3 0 1 123 FTD 7290 2 0 2 107 7474 2 0 2 110 7559 2 0 2 111 WTD 7890 2 0 1 116 8088 2 0 1 119 8181 2 0 1 120 CRI Lumen Multiplier CCT 80 CRI 90 CRI 3000K 0.9119 0.7033 4000K 0.8941 N/A Amber Multiplier CCT Multiplier 5000K 1 AM 0.1727 Index Page4/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDM/D/48L-85/4K7/4F/UNV/*** Notes: Type: WP1 INDY22-104626 currentlighting.com/kimlighting © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 5 of 9 Rev 08/02/22 kl_wdm_spec_R03 WDM WALL MOUNTED DATE:LOCATION: TYPE:PROJECT: CATALOG #: DELIVERED LUMENS (CONTINUED) LEDs # Drive Current Lumens Package Nominal Watts Lens Options Distribution 3000K 70CRI 4000K 70CRI 5000K 70CRI Lumen BUG Rating lm/w Lumen BUG Rating lm/w Lumen BUG Rating lm/w B U G B U G B U G 48L 550mA 10,000 85 Clear 1 11194 1 0 1 127 11476 1 0 1 130 11607 1 0 1 132 2 10601 2 0 2 120 10867 2 0 2 123 10991 2 0 2 125 3 10779 1 0 2 122 11050 1 0 2 126 11177 1 0 2 127 4F 10576 1 0 2 120 10842 1 0 2 123 10966 1 0 2 125 4W 10632 1 0 2 121 10899 2 0 2 124 11024 2 0 2 125 SP 11870 5 0 1 135 12168 5 0 1 138 12308 5 0 1 140 Diffused WG 10279 3 0 1 117 10537 3 0 1 120 10658 3 0 1 121 FTD 9300 2 0 2 106 9534 2 0 2 108 9643 2 0 2 110 WTD 10065 2 0 2 114 10318 2 0 2 117 10436 2 0 2 119 650mA 12,000 105 Clear 1 12808 1 0 1 124 13130 1 0 1 127 13280 1 0 1 128 2 12128 2 0 2 117 12433 2 0 2 120 12575 2 0 2 121 3 12333 1 0 2 119 12643 2 0 2 122 12787 2 0 2 123 4F 12100 2 0 2 117 12405 2 0 2 120 12547 2 0 2 121 4W 12163 2 0 3 117 12469 2 0 3 120 12612 2 0 3 122 SP 13580 5 0 1 131 13922 5 0 1 134 14081 5 0 1 136 Diffused WG 11760 3 0 1 113 12056 3 0 1 116 12193 3 0 1 118 FTD 10641 2 0 2 103 10908 2 0 2 105 11033 3 0 2 106 WTD 11515 2 0 2 111 11805 2 0 2 114 11940 2 0 2 115 800mA 14,000 130 Clear 1 15227 2 0 1 117 15610 2 0 1 120 15789 2 0 1 121 2 14419 2 0 2 110 14782 2 0 2 113 14951 2 0 2 114 3 14662 2 0 3 112 15031 2 0 3 115 15203 2 0 3 116 4F 14386 2 0 2 110 14748 2 0 3 113 14917 2 0 3 114 4W 14462 2 0 3 111 14826 2 0 3 114 14995 2 0 3 115 SP 16146 5 0 1 124 16552 5 0 1 127 16741 5 0 1 128 Diffused WG 13981 3 0 2 107 14333 3 0 2 110 14497 3 0 2 111 FTD 12651 3 0 2 97 12969 3 0 2 99 13117 3 0 2 100 WTD 13691 3 0 2 105 14035 3 0 2 107 14196 3 0 2 109 Index Page5/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDM/D/48L-85/4K7/4F/UNV/*** Notes: Type: WP1 INDY22-104626 currentlighting.com/kimlighting © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 6 of 9 Rev 08/02/22 kl_wdm_spec_R03 WDM WALL MOUNTED PHOTOMETRY WDM-D-48L-130-4K7-1 WDM-D-48L-130-4K7-2 WDM-D-48L-130-4K7-3 LUMINAIRE DATA LUMINAIRE DATA LUMINAIRE DATA ISOFOOT CANDLE PLOT ISOFOOT CANDLE PLOT ISOFOOT CANDLE PLOT Description 4000K, 70CRI Delivered Lumens 15610 Watts 131 Efficacy 119.2 IES Type I BUG Rating B2-U0-G1 Mounting Height 30 ft Grid Scale 30 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 13607 87.2% Downward House Side 2003 12.8% Downward Total 15610 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 15610 100% Description 4000K, 70CRI Delivered Lumens 14782 Watts 131 Efficacy 112.8 IES Type II BUG Rating B2-U0-G2 Mounting Height 30 ft Grid Scale 30 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 11861 80.2% Downward House Side 2921 19.8% Downward Total 14782 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 14782 100% Description 4000K, 70CRI Delivered Lumens 15031 Watts 131 Efficacy 114.7 IES Type III BUG Rating B2-U0-G2 Mounting Height 30 ft Grid Scale 30 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 12414 82.6% Downward House Side 2617 17.4% Downward Total 15031 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 15031 100% 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 Index Page6/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDM/D/48L-85/4K7/4F/UNV/*** Notes: Type: WP1 INDY22-104626 currentlighting.com/kimlighting © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 7 of 9 Rev 08/02/22 kl_wdm_spec_R03 WDM WALL MOUNTED PHOTOMETRY WDM-D-48L-130-4K7-4F WDM-D-48L-130-4K7-4W WDM-D-48L-130-4K7-FTD LUMINAIRE DATA LUMINAIRE DATA LUMINAIRE DATA ISOFOOT CANDLE PLOT ISOFOOT CANDLE PLOT ISOFOOT CANDLE PLOT Description 4000K, 70CRI Delivered Lumens 14747 Watts 131 Efficacy 112.6 IES Type IV BUG Rating B2-U0-G3 Mounting Height 30 ft Grid Scale 30 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 12444 84.4% Downward House Side 2303 15.6% Downward Total 14747 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 14747 100% Description 4000K, 70CRI Delivered Lumens 14826 Watts 131 Efficacy 113.2 IES Type IV BUG Rating B2-U0-G3 Mounting Height 30 ft Grid Scale 30 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 12625 85.2% Downward House Side 2201 14.8% Downward Total 14826 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 14826 100% Description 4000K, 70CRI Delivered Lumens 12968 Watts 131 Efficacy 99.0 IES Type IV BUG Rating B3-U0-G2 Mounting Height 30 ft Grid Scale 30 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 8709 67.2% Downward House Side 4259 32.8% Downward Total 12968 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 12968 100% 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 Index Page7/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDM/D/48L-85/4K7/4F/UNV/*** Notes: Type: WP1 INDY22-104626 currentlighting.com/kimlighting © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 8 of 9 Rev 08/02/22 kl_wdm_spec_R03 WDM WALL MOUNTED PHOTOMETRY WDM-D-48L-130-4K7-SP WDM-D-48L-130-4K7-WG WDM-D-48L-130-4K7-WTD LUMINAIRE DATA LUMINAIRE DATA LUMINAIRE DATA ISOFOOT CANDLE PLOT ISOFOOT CANDLE PLOT ISOFOOT CANDLE PLOT Description 4000K, 70CRI Delivered Lumens 16550 Watts 131 Efficacy 126.3 IES Type VS BUG Rating B5-U0-G1 Mounting Height 30 ft Grid Scale 30 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 8275 50.0% Downward House Side 8275 50.0% Downward Total 16550 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 16550 100% Description 4000K, 70CRI Delivered Lumens 14333 Watts 131 Efficacy 109.4 IES Type I BUG Rating B3-U0-G2 Mounting Height 30 ft Grid Scale 30 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 9242 64.5% Downward House Side 5091 35.5% Downward Total 14333 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 14333 100% Description 4000K, 70CRI Delivered Lumens 14034 Watts 131 Efficacy 107.1 IES Type II BUG Rating B3-U0-G2 Mounting Height 30 ft Grid Scale 30 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 10105 72.0% Downward House Side 3929 28.0% Downward Total 14034 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 14034 100% 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 Index Page8/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDM/D/48L-85/4K7/4F/UNV/*** Notes: Type: WP1 INDY22-104626 currentlighting.com/kimlighting © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 9 of 9 Rev 08/02/22 kl_wdm_spec_R03 WDM WALL MOUNTED 0% 20% 40% 60% 80% 100% 380 430 480 530 580 630 680 730 780Relative PowerWavelength (nm) Reference Source Test Source SPECTRAL POWER DISTRIBUTION COMPARISONSPECTRAL POWER DISTRIBUTION COMPARISON TM-30 DATA COLOR VECTOR GRAPHIC SPECTRAL POWER DISTRIBUTION COMPARISONTEST SOURCE Reference Illuminant Test Source DATE:LOCATION: TYPE:PROJECT: CATALOG #: Rf 68 Rg 99 CCT(K)3947 DUV 0.0004 x 0.3831 y 0.3793 CIE Ra 72 Wavelength (nm)Relative PowerReference Illuminant Test Source COLOR VECTOR GRAPHIC ELECTRICAL DATA Dimming Drive Current System Watts Line Voltage Amps AC Min. Power Factor Max THD (%) Dimming Range Source current out of 0-10V Absolute voltage range on 0-10V (+) Min Max Min MaxVACHz120208240277347480 350mA 54 120-480 50/60 0.45 0.26 0.23 0.19 0.16 0.11 >0.9 20 10% to 100%0mA 1mA 0V 10V 425mA 68 0.53 0.31 0.27 0.23 0.18 0.13 550mA 88 0.70 0.40 0.35 0.30 0.24 0.18 650mA 104 0.84 0.49 0.42 0.36 0.29 0.21 800mA 131 1.09 0.63 0.55 0.47 0.38 0.27 TM-21 Lifetime Calculation - Projected Lumen Maintenance (25°C / 77°C) Ambient Temp.0 25,000 36,000 50,000 100,000 Reported L70 25°C / 77°F 100%97%96%94%88% 60khrs 40°C / 104°F 100%94%92%90%82% CRI Lumen Multiplier CCT 70 CRI 80 CRI 90 CRI 3000K 1 0.9119 0.7033 4000K 1 0.8941 0.734 5000K 1 0.879 0.7712 Amber Multiplier CCT Multiplier 5000K 1 AM 0.1727 2700K Multiplier CCT Multiplier 5000K 1 2700K 0.897 Index Page9/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDM/D/48L-65/4K7/3/UNV/*** Notes: Type: WP2 INDY22-104626 currentlighting.com/kimlighting © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 1 of 9 Rev 08/02/22 kl_wdm_spec_R03 WDM WALL MOUNTED FEATURES • -5° to +10° tilt adjustment • High performance optics deliver up to 16,000 lumens • up or down mountable without modification • Programmable occupancy sensor (dimming) • NX Lighting Controls • 130+ lumens per watt • UL/cUL listed for wet locations, IP66 Listed. DATE:LOCATION: TYPE:PROJECT: SPECIFICATIONS CONTROL TECHNOLOGY KEY DATA Lumen Range 5,950–16,000 Wattage Range 54–131 Efficacy Range (LPW)97–145 Reported Life (Hours)L70/60,000 Weight 35 lbs/15.87 kg CATALOG #: Wall Director Medium RELATED PRODUCTS Wall Director Small Downlight only, 3000K and warmer CCTs CONSTRUCTION • Optical housing is a one-piece, die-cast low copper (<0.6%) aluminum alloy with integral heat sink. The housing rotates against mounting arm housing to provide -5° to 10° of adjustment with degree markers label. At 0° adjustment, lens is totally concealed from view above horizontal with fixture mounted in the downward position. • Mounting arm housing is one-piece die- cast, low copper (<0.6%) aluminum alloy with provisions for tilt mechanism. Mounting arm fastens to the mounting plate with keyhole slots freeing both hands for securing and wiring. One stainless steel socket-head screw on the tilt mechanism frees the optical housing to rotate for aiming. Tightening the screws locks the housing and lens frame together with sealing provided by a silicone gasket. For visual aiming, adjustment may be accomplished with the fixture on. • Lens Frame is a one-piece, die-cast low copper (<0.6%) aluminum alloy with integral cooling fins to dissipate driver thermal. • Finish: fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) polyester powdercoat • Bracketry and hardware shall be stainless steel OPTICS • LEDs mount to a metal printed circuit board assembly (MCPCB). • Optical lenses are clear injection molded PMMA acrylic. • Secondary lens is impact resistant 1/8” tempered glass with anti-reflective coating. ELECTRICAL • Universal voltage, 120 through 277V with a ±10% tolerance. Driver is Underwriters Laboratories listed. • High voltage configurations, 347/480. Driver has a 0-10V dimming interface for multi-level illumination options. Driver is Underwriters Laboratories listed. • "Thermal Shield”, secondary side, thermistor provides protection for the sustainable life of LED module and electronic components. • Drivers have a greater than a 0.9 power factor, less than 20% harmonic distortion, and be suitable for operation in -40°C to 40°C ambient environments. • Luminaire shall be capable of operating at 100% brightness in a 40°C environment. Both driver and optical array have integral thermal protection that will dim the luminaire upon detection of temperatures in excess of 85°C. • Modular wiring harness in the service area provides user access to the dimming circuitry. INSTALLATION • Junction box (by Others): Standard with steel, quick-mount junction box plate that mounts directly to 4” J-Box. • Mounting plate is stainless steel and features a one-piece EPDM gasket on back side of plate to firmly seal fixture to wall surface, forbidding entry of moisture and particulates. • Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious personal injury. SERVICING • Housing should hang freely in an open service position for inspection of primary wire connections. Once in service position, the housing can be removed for service by sliding the assembly to the left (for down mounting) or to the right (for up mounting) and disconnecting the wiring plugs. • Driver assembly shall be mounted to a prewired internal tray with quick disconnects for removal. (Specifications continued on page 3) IK07 Index Page1/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDM/D/48L-65/4K7/3/UNV/*** Notes: Type: WP2 INDY22-104626 currentlighting.com/kimlighting © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 2 of 9 Rev 08/02/22 kl_wdm_spec_R03 WDM WALL MOUNTED ORDERING GUIDE HOUSING WDM Model Mounting Source Wattage Light Engine Distribution WDM WallDirector Medium D Down U 1 Up 48L 48 LEDs 1 Type I 2 Type II 3 Type III 4W Type IV Wide 4F Type IV Forward WG 2 Wall Graze SP Spot/Column FTD 2 Forward Throw Diffuse WTD 2 Wide Throw Diffuse Voltage Fixture Finish Control Options Options Control Accessories UNV 120-277V 347 3 347V 480 3 480V PC 3 Button Photocell SCP-8F 3, 4, 5, 9 Programmable Occ. Sensor (<9' height) SCP-20F 3, 4, 5, 9 Programmable Occ. Sensor (<9' - 20' height) 2DR Dual Drivers 2PF Dual Power Feeds NXWS16F 1 ,4 NX Networked Wireless Enabled Integral NXSMP2-LMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming NXW 4, 5 NX Networked Wireless Radio Module NXRM2 and Bluetooth Programming, without Sensor EM 3 Integral Battery Backup Unit (8W) SF Single Fuse & Fuse holder DF Double Fuse & Fuse holder SCM1 1/2" Surface Conduit Mount SCM2 3/4" Surface Conduit Mount SCPREMOTE SCP configuration tool Example: WDM-D-48L-55-3K7-1-UNV-BLS-PC-EM CATALOG # 55 55 Watts, 6000 lm 65 65 Watts, 8000 lm 85 85 Watts, 10000 lm 105 105 Watts, 12000 lm 130 130 Watts, 14000 lm DATE:LOCATION: TYPE:PROJECT: CATALOG #: AM 6 Amber-595nm Peak 3K7 3000K/70CRI 3K8 3000K/80CRI 4K7 4000K/70CRI 4K8 4000K/80CRI 5K7 5000K/70CRI Notes: 1 Not available with EM option or with SCP, NXWS16F sensor options. 2 WG, FTD, and WTD come with a diffused lens 3 Not available with other control options 4 Input voltage 120-347V 5 Not available in 480V 6 Turtle friendly 8 Consult factory for custom color, marine and corrosive finish options 9 SCPREMOTE SCP configuration tool needed Microsoft, Encarta, MSN, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. BLS Black Gloss Smooth BLT Black Matte Textured DBS Dark Bronze Gloss Smooth DBT Dark Bronze Matte Textured GTT Graphite Matte Textured LGS Light Grey Gloss Smooth LGT Light Grey Matte Textured PSS Platinum Silver Gloss Smooth VGT Verde Green Matte Textured WHS White Gloss Smooth WHT White Matte Textured Color Option CC 8 Custom Color Index Page2/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDM/D/48L-65/4K7/3/UNV/*** Notes: Type: WP2 INDY22-104626 currentlighting.com/kimlighting © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 3 of 9 Rev 08/02/22 kl_wdm_spec_R03 WDM WALL MOUNTED • Optional factory programmed dimming profile. • Surge protection: 10,000k in parallel, 20,000k in series. • Wiring: No. 18AWM rated 90°C, wet rating. DIMMING • Dimming range from 100% to 10% through the use of the standard 0-10V interface on the programmable driver. • Modular wiring harness in the service area provides user access to the dimming circuitry. • Dimming circuitry compatible with 0-10V, user-defined control devices. • Optional factory programmed dimming profile. BUTTON PHOTOCELL • Optional universal voltage (120-277V) button photocontrol for dusk to dawn energy savings. Photocontrol is factory installed inside the housing with a fully gasketed sensor on the side wall. For multiple fixture mountings, one fixture is supplied with a photocell to operate the others. NX LIGHTING CONTROLS • NX lighting controls platform utilizes a Distributed Network Architecture (DNA) that connects intelligent devices including luminaires, controllers, panels, occupancy sensors, photocells, wall switches and dimmers, creating a system with an unmatched level of reliability, scalability and simplicity OPTIONAL FUSING: • SF for 120, 277, and 347 Line volts • DF for 208, 240, and 480 Line volts • Hight temperature fuse holders factory installed inside the fixture housing. • Fuse is included. OPTIONAL BACKUP BATTERY • Integral battery backup provides emergency path of egress lighting for the required 90 minutes for 0°C ambient environments. CAUTION • Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious personal injury. CERTIFICATIONS AND LISTINGS • Listed to UL1598 and CSA C22.2#250.0- 24 for wet locations and 40˚C ambient temperatures • IEC 66262 Mechanical Impact Code IK08 • IP66 certified • RoHS compliant • This product qualifies as a “designated country construction material” per FAR 52.225-11 Buy American-Construction Materials under Trade Agreements effective 6/06/2020. See Buy American Solutions. WARRANTY • 5 year warranty SPECIFICATIONS (CONTINUED) FixtureHousing 30 mA Max Pink Dimming Lead (-) Standard Input Black (+) White (-) Green (GND) Purple Dimming Lead (+) (L) (N) ELECTRICAL (CONTINUED) Index Page3/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDM/D/48L-65/4K7/3/UNV/*** Notes: Type: WP2 INDY22-104626 currentlighting.com/kimlighting © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 4 of 9 Rev 08/02/22 kl_wdm_spec_R03 WDM WALL MOUNTED DATE:LOCATION: TYPE:PROJECT: CATALOG #: DIMENSIONS DELIVERED LUMENS 5.7” 11.6” 5.7” 8.9” (226 mm) (145 mm) (295 mm) (145 mm) 18.0” 11.3” (457 mm) 18.0” (457 mm) (145 mm) Above / Below (Depending on mounting) Front Side BackWeight: 35 lbs LEDs # Drive Current Lumens Package Nominal Watts Lens Options Distribution 3000K 70CRI 4000K 70CRI 5000K 70CRI Lumen BUG Rating lm/w Lumen BUG Rating lm/w Lumen BUG Rating lm/w B U G B U G B U G 48L 350mA 6,000 55 Clear 1 7162 1 0 1 132 7342 1 0 1 135 7426 1 0 1 137 2 6782 1 0 1 125 6953 1 0 1 128 7032 1 0 1 130 3 6896 1 0 2 127 7070 1 0 2 130 7151 1 0 2 132 4F 6766 1 0 2 125 6937 1 0 2 128 7016 1 0 2 129 4W 6802 1 0 2 125 6973 1 0 2 128 7053 1 0 2 130 SP 7594 4 0 1 140 7785 4 0 1 143 7874 4 0 1 145 Diffused WG 6576 3 0 1 121 6741 3 0 1 124 6818 3 0 1 126 FTD 5950 2 0 1 110 6100 2 0 1 112 6170 2 0 1 114 WTD 6439 2 0 1 119 6601 2 0 1 122 6677 2 0 1 123 425mA 8,000 65 Clear 1 8775 1 0 1 129 8996 1 0 1 132 9099 1 0 1 134 2 8309 1 0 2 122 8518 1 0 2 125 8616 1 0 2 127 3 8450 1 0 2 124 8662 1 0 2 127 8761 1 0 2 129 4F 8290 1 0 2 122 8499 1 0 2 125 8596 1 0 2 126 4W 8334 1 0 2 123 8544 1 0 2 126 8641 1 0 2 127 SP 9304 4 0 1 137 9538 4 0 1 140 9647 4 0 1 142 Diffused WG 8057 3 0 1 118 8260 3 0 1 121 8354 3 0 1 123 FTD 7290 2 0 2 107 7474 2 0 2 110 7559 2 0 2 111 WTD 7890 2 0 1 116 8088 2 0 1 119 8181 2 0 1 120 CRI Lumen Multiplier CCT 80 CRI 90 CRI 3000K 0.9119 0.7033 4000K 0.8941 N/A Amber Multiplier CCT Multiplier 5000K 1 AM 0.1727 Index Page4/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDM/D/48L-65/4K7/3/UNV/*** Notes: Type: WP2 INDY22-104626 currentlighting.com/kimlighting © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 5 of 9 Rev 08/02/22 kl_wdm_spec_R03 WDM WALL MOUNTED DATE:LOCATION: TYPE:PROJECT: CATALOG #: DELIVERED LUMENS (CONTINUED) LEDs # Drive Current Lumens Package Nominal Watts Lens Options Distribution 3000K 70CRI 4000K 70CRI 5000K 70CRI Lumen BUG Rating lm/w Lumen BUG Rating lm/w Lumen BUG Rating lm/w B U G B U G B U G 48L 550mA 10,000 85 Clear 1 11194 1 0 1 127 11476 1 0 1 130 11607 1 0 1 132 2 10601 2 0 2 120 10867 2 0 2 123 10991 2 0 2 125 3 10779 1 0 2 122 11050 1 0 2 126 11177 1 0 2 127 4F 10576 1 0 2 120 10842 1 0 2 123 10966 1 0 2 125 4W 10632 1 0 2 121 10899 2 0 2 124 11024 2 0 2 125 SP 11870 5 0 1 135 12168 5 0 1 138 12308 5 0 1 140 Diffused WG 10279 3 0 1 117 10537 3 0 1 120 10658 3 0 1 121 FTD 9300 2 0 2 106 9534 2 0 2 108 9643 2 0 2 110 WTD 10065 2 0 2 114 10318 2 0 2 117 10436 2 0 2 119 650mA 12,000 105 Clear 1 12808 1 0 1 124 13130 1 0 1 127 13280 1 0 1 128 2 12128 2 0 2 117 12433 2 0 2 120 12575 2 0 2 121 3 12333 1 0 2 119 12643 2 0 2 122 12787 2 0 2 123 4F 12100 2 0 2 117 12405 2 0 2 120 12547 2 0 2 121 4W 12163 2 0 3 117 12469 2 0 3 120 12612 2 0 3 122 SP 13580 5 0 1 131 13922 5 0 1 134 14081 5 0 1 136 Diffused WG 11760 3 0 1 113 12056 3 0 1 116 12193 3 0 1 118 FTD 10641 2 0 2 103 10908 2 0 2 105 11033 3 0 2 106 WTD 11515 2 0 2 111 11805 2 0 2 114 11940 2 0 2 115 800mA 14,000 130 Clear 1 15227 2 0 1 117 15610 2 0 1 120 15789 2 0 1 121 2 14419 2 0 2 110 14782 2 0 2 113 14951 2 0 2 114 3 14662 2 0 3 112 15031 2 0 3 115 15203 2 0 3 116 4F 14386 2 0 2 110 14748 2 0 3 113 14917 2 0 3 114 4W 14462 2 0 3 111 14826 2 0 3 114 14995 2 0 3 115 SP 16146 5 0 1 124 16552 5 0 1 127 16741 5 0 1 128 Diffused WG 13981 3 0 2 107 14333 3 0 2 110 14497 3 0 2 111 FTD 12651 3 0 2 97 12969 3 0 2 99 13117 3 0 2 100 WTD 13691 3 0 2 105 14035 3 0 2 107 14196 3 0 2 109 Index Page5/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDM/D/48L-65/4K7/3/UNV/*** Notes: Type: WP2 INDY22-104626 currentlighting.com/kimlighting © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 6 of 9 Rev 08/02/22 kl_wdm_spec_R03 WDM WALL MOUNTED PHOTOMETRY WDM-D-48L-130-4K7-1 WDM-D-48L-130-4K7-2 WDM-D-48L-130-4K7-3 LUMINAIRE DATA LUMINAIRE DATA LUMINAIRE DATA ISOFOOT CANDLE PLOT ISOFOOT CANDLE PLOT ISOFOOT CANDLE PLOT Description 4000K, 70CRI Delivered Lumens 15610 Watts 131 Efficacy 119.2 IES Type I BUG Rating B2-U0-G1 Mounting Height 30 ft Grid Scale 30 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 13607 87.2% Downward House Side 2003 12.8% Downward Total 15610 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 15610 100% Description 4000K, 70CRI Delivered Lumens 14782 Watts 131 Efficacy 112.8 IES Type II BUG Rating B2-U0-G2 Mounting Height 30 ft Grid Scale 30 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 11861 80.2% Downward House Side 2921 19.8% Downward Total 14782 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 14782 100% Description 4000K, 70CRI Delivered Lumens 15031 Watts 131 Efficacy 114.7 IES Type III BUG Rating B2-U0-G2 Mounting Height 30 ft Grid Scale 30 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 12414 82.6% Downward House Side 2617 17.4% Downward Total 15031 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 15031 100% 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 Index Page6/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDM/D/48L-65/4K7/3/UNV/*** Notes: Type: WP2 INDY22-104626 currentlighting.com/kimlighting © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 7 of 9 Rev 08/02/22 kl_wdm_spec_R03 WDM WALL MOUNTED PHOTOMETRY WDM-D-48L-130-4K7-4F WDM-D-48L-130-4K7-4W WDM-D-48L-130-4K7-FTD LUMINAIRE DATA LUMINAIRE DATA LUMINAIRE DATA ISOFOOT CANDLE PLOT ISOFOOT CANDLE PLOT ISOFOOT CANDLE PLOT Description 4000K, 70CRI Delivered Lumens 14747 Watts 131 Efficacy 112.6 IES Type IV BUG Rating B2-U0-G3 Mounting Height 30 ft Grid Scale 30 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 12444 84.4% Downward House Side 2303 15.6% Downward Total 14747 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 14747 100% Description 4000K, 70CRI Delivered Lumens 14826 Watts 131 Efficacy 113.2 IES Type IV BUG Rating B2-U0-G3 Mounting Height 30 ft Grid Scale 30 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 12625 85.2% Downward House Side 2201 14.8% Downward Total 14826 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 14826 100% Description 4000K, 70CRI Delivered Lumens 12968 Watts 131 Efficacy 99.0 IES Type IV BUG Rating B3-U0-G2 Mounting Height 30 ft Grid Scale 30 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 8709 67.2% Downward House Side 4259 32.8% Downward Total 12968 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 12968 100% 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 Index Page7/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDM/D/48L-65/4K7/3/UNV/*** Notes: Type: WP2 INDY22-104626 currentlighting.com/kimlighting © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 8 of 9 Rev 08/02/22 kl_wdm_spec_R03 WDM WALL MOUNTED PHOTOMETRY WDM-D-48L-130-4K7-SP WDM-D-48L-130-4K7-WG WDM-D-48L-130-4K7-WTD LUMINAIRE DATA LUMINAIRE DATA LUMINAIRE DATA ISOFOOT CANDLE PLOT ISOFOOT CANDLE PLOT ISOFOOT CANDLE PLOT Description 4000K, 70CRI Delivered Lumens 16550 Watts 131 Efficacy 126.3 IES Type VS BUG Rating B5-U0-G1 Mounting Height 30 ft Grid Scale 30 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 8275 50.0% Downward House Side 8275 50.0% Downward Total 16550 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 16550 100% Description 4000K, 70CRI Delivered Lumens 14333 Watts 131 Efficacy 109.4 IES Type I BUG Rating B3-U0-G2 Mounting Height 30 ft Grid Scale 30 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 9242 64.5% Downward House Side 5091 35.5% Downward Total 14333 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 14333 100% Description 4000K, 70CRI Delivered Lumens 14034 Watts 131 Efficacy 107.1 IES Type II BUG Rating B3-U0-G2 Mounting Height 30 ft Grid Scale 30 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 10105 72.0% Downward House Side 3929 28.0% Downward Total 14034 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 14034 100% 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 Index Page8/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDM/D/48L-65/4K7/3/UNV/*** Notes: Type: WP2 INDY22-104626 currentlighting.com/kimlighting © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 9 of 9 Rev 08/02/22 kl_wdm_spec_R03 WDM WALL MOUNTED 0% 20% 40% 60% 80% 100% 380 430 480 530 580 630 680 730 780Relative PowerWavelength (nm) Reference Source Test Source SPECTRAL POWER DISTRIBUTION COMPARISONSPECTRAL POWER DISTRIBUTION COMPARISON TM-30 DATA COLOR VECTOR GRAPHIC SPECTRAL POWER DISTRIBUTION COMPARISONTEST SOURCE Reference Illuminant Test Source DATE:LOCATION: TYPE:PROJECT: CATALOG #: Rf 68 Rg 99 CCT(K)3947 DUV 0.0004 x 0.3831 y 0.3793 CIE Ra 72 Wavelength (nm)Relative PowerReference Illuminant Test Source COLOR VECTOR GRAPHIC ELECTRICAL DATA Dimming Drive Current System Watts Line Voltage Amps AC Min. Power Factor Max THD (%) Dimming Range Source current out of 0-10V Absolute voltage range on 0-10V (+) Min Max Min MaxVACHz120208240277347480 350mA 54 120-480 50/60 0.45 0.26 0.23 0.19 0.16 0.11 >0.9 20 10% to 100%0mA 1mA 0V 10V 425mA 68 0.53 0.31 0.27 0.23 0.18 0.13 550mA 88 0.70 0.40 0.35 0.30 0.24 0.18 650mA 104 0.84 0.49 0.42 0.36 0.29 0.21 800mA 131 1.09 0.63 0.55 0.47 0.38 0.27 TM-21 Lifetime Calculation - Projected Lumen Maintenance (25°C / 77°C) Ambient Temp.0 25,000 36,000 50,000 100,000 Reported L70 25°C / 77°F 100%97%96%94%88% 60khrs 40°C / 104°F 100%94%92%90%82% CRI Lumen Multiplier CCT 70 CRI 80 CRI 90 CRI 3000K 1 0.9119 0.7033 4000K 1 0.8941 0.734 5000K 1 0.879 0.7712 Amber Multiplier CCT Multiplier 5000K 1 AM 0.1727 2700K Multiplier CCT Multiplier 5000K 1 2700K 0.897 Index Page9/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDS/D/24L-30/4K7/3/UNV/*** Notes: Type: WP3 INDY22-104626 © 2021 Kim Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Blvd • Greenville, SC 29607 / Tel 864.678.1000 / Website www.kimlighting.com Page 1/9 Rev. 11/17/21 WDS FEATURES • -5° to +10° tilt adjustment • High performance optics deliver up to 7,500 lumens • up or down mountable without modification • Programmable occupancy sensor (dimming) • NX and SiteSync wireless controls • 130+ lumens per watt • UL/cUL listed for wet locations, IP66 Listed PHOTOMETRYBROCHUREDelivered LumensS Dimensional DrawingsWDS WALL MOUNTED DATE:LOCATION: TYPE:PROJECT: SPECIFICATIONS CONTROL TECHNOLOGY KEY DATA Lumen Range 2,855–8,567 Wattage Range 29–74 Efficacy Range (LPW)89–129 Reported Life (Hours)L70/60,000 Weight 20 lbs/9.07 kg CATALOG #: Wall Director Small RELATED PRODUCTS   Wall Director Medium Downlight only, 3000K and warmer CCTs ™ CONSTRUCTION• Optical housing is a one-piece, die-cast low copper (<0.6%) aluminum alloy with integral heat sink. The housing rotates against mounting arm housing to provide -5° to 10° of adjustment with degree markers label. At 0° adjustment, lens is totally concealed from view above horizontal with fixture mounted in the downward position. • Mounting arm housing is one-piece die- cast, low copper (<0.6%) aluminum alloy with provisions for tilt mechanism. Mounting arm fastens to the mounting plate with keyhole slots freeing both hands for securing and wiring. One stainless steel socket-head screw on the tilt mechanism frees the optical housing to rotate for aiming. Tightening the screws locks the housing and lens frame together with sealing provided by a silicone gasket. For visual aiming, adjustment may be accomplished with the fixture on. • Lens Frame is a one-piece, die-cast low copper (<0.6%) aluminum alloy with integral cooling fins to dissipate driver thermal. • Bracketry and hardware shall be stainless steel. • Finish: fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) polyester powdercoat ELECTRICAL • Universal voltage, 120 through 277V with a ±10% tolerance. Driver is Underwriters Laboratories listed. • High voltage configurations, 347/480. Driver has a 0-10V dimming interface for multi-level illumination options. Driver is Underwriters Laboratories listed. • "Thermal Shield”, secondary side, thermistor provides protection for the sustainable life of LED module and electronic components • Drivers shall have greater than a 0.9 power factor, less than 20% harmonic distortion, and be suitable for operation in -40°C to 40°C ambient environments • Luminaire shall be capable of operating at 100% brightness in a 40°C environment. Both driver and optical array have integral thermal protection that will dim the luminaire upon detection of temperatures in excess of 85°C • Modular wiring harness in the service area provides user access to the dimming circuitry • Optional factory programmed dimming profile • Surge protection: 10,000k in parallel, 20,000k in series • Wiring: No. 18AWM rated 90°C, wet rating. OPTICS • LEDs mount to a metal printed circuit board assembly (MCPCB). • Optical lenses are clear injection molded PMMA acrylic. • Secondary lens is impact resistant 1/8” tempered glass with anti-reflective coating. INSTALLATION • Junction box (by others): Standard with steel, quick-mount junction box plate that mounts directly to 4” J-Box. • Mounting plate is stainless steel and features a one-piece EPDM gasket on back side of plate to firmly seal fixture to wall surface, forbidding entry of moisture and particulates. • Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious personal injury. S ERVICING • Housing should hang freely in an open service position for inspection of primary wire connections. Once in service position, the housing can be removed for service by sliding the assembly to the left (for down mounting) or to the right (for up mounting) and disconnecting the wiring plugs. • Driver assembly shall be mounted to a prewired internal tray with quick disconnects for removal. (Specifications continued on page 3) IK08 Index Page1/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDS/D/24L-30/4K7/3/UNV/*** Notes: Type: WP3 INDY22-104626 WDS WALL MOUNTED © 2021 Kim Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Blvd • Greenville, SC 29607 / Tel 864.678.1000 / Website www.kimlighting.com Page 2/9 Rev. 11/17/21 WDS ORDERING GUIDE HOUSING WDS Model Mounting Source Wattage Light Engine Distribution WDS WallDirector Small D Down U 1 Up 24L 24 LEDs AM 6 Monochromatic Amber 3K7 3000K/70CRI 3K8 3000K/80CRI 4K7 4000K/70CRI 4K8 4000K/80CRI 5K7 5000K/70CRI 1 Type I 2 Type II 3 Type III 4W Type IV Wide 4F Type IV Forward WG 2 Wall Graze SP Spot/Column FTD 2 Forward Throw Diffuse WTD 2 Wide Throw Diffuse Voltage Fixture Finish Control Options Options Control Accessories UNV 120-277V 347 3, 10 347V 480 3, 10 480V BLS Black Gloss Smooth BLT Black Matte Textured DBS Dark Bronze Gloss Smooth DBT Dark Bronze Matte Textured GTT Graphite Matte Textured LGS Light Grey Gloss Smooth LGT Light Grey Matte Textured PSS Platinum Silver Gloss Smooth VGT Verde Green Matte Textured WHS White Gloss Smooth WHT White Matte Textured Color Option CC 8 Custom Color PC 11 Button Photocell SCP-8F 3, 4, 5, 9 Programmable Occ. Sensor (<9' height) SCP-20F 3, 4, 5, 9 Programmable Occ. Sensor (9' - 20' height) SWP 3, 4, 5, 7 SiteSync Wireless Pre- Commission NXWE 4, 5 NX Wireless Enabled EM 3 Integral Battery Backup Unit (8W) SF Single Fuse & Fuse holder DF Double Fuse & Fuse holder SCM1 1/2" Surface Conduit Mount SCM2 3/4" Surface Conduit Mount SCPREMOTE SCP configuration tool SWUSB SiteSync Software on USB SWTAB SiteSync Windows® Tablet SWBRG SiteSync Software Bridge Node Example: WDS-D-24L-30-3K7-1-UNV-BLS-PC-EM-SWUSB CATALOG # 30 30 Watts, 3000 lm 40 40 Watts, 4500 lm 60 60 Watts, 6000 lm 75 75 Watts, 7500 lm DATE:LOCATION: TYPE:PROJECT: CATALOG #: Notes: 1 Not available with EM option or with SCP,SWPM, NXSPW14 and NXSP14F sensor options. 2 WG, FTD, and WTD come with a diffused lens 3 Not available with other control options and Integral Battery Backup Unit 4 Input voltage 120-347V 5 Not available in 480V 6 Turtle friendly 7 Specify group and zone at time of order, See www.hubbelllighting.com/sitesync for more details. Order at least one SiteSync interface accessory SWUSB or SWTAB. Each option contains SiteSync License, GUI, and Bridge Node 8 Consult factory for custom color, marine and corrosive finish options 9 SCPREMOTE SCP configuration tool needed 10 Not available with 30 watt or 40 watts 11 PC not available with EM Microsoft, Encarta, MSN, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Index Page2/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDS/D/24L-30/4K7/3/UNV/*** Notes: Type: WP3 INDY22-104626 © 2021 Kim Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Blvd • Greenville, SC 29607 / Tel 864.678.1000 / Website www.kimlighting.com Page 3/9 Rev. 11/17/21 WDS DIMMING: • Dimming range from 100% to 10% through the use of the standard 0-10V interface on the programmable driver. • Modular wiring harness in the service area provides user access to the dimming circuitry. • Dimming circuitry compatible with 0-10V, user-defined control devices. • Optional factory programmed dimming profile. BUTTON PHOTOCELL • Optional universal voltage (120-277V) button photocontrol for dusk to dawn energy savings. Photocontrol is factory installed inside the housing with a fully gasketed sensor on the side wall. For multiple fixture mountings, one fixture is supplied with a photocell to operate the others. WIRELESS CONTROLS SITESYNC™1 • SiteSync™ wireless control system for reduction in energy and maintenance cost while optimizing light quality 24/7. See ordering information or visit www. hubbelllighting.com/products/sitesync for more details. NX DISTRIBUTED INTELIGENCETM • Hubbell Control Solutions' NX Distributed IntelligenceTM lighting control platform utilizes a Distributed Network Architecture (DNA) that connects intelligent devices including luminaires, controllers, panels, occupancy sensors, photocells, wall switches and dimmers, creating a system with an unmatched level of reliability, scalability and simplicity OPTIONAL FUSING: • SF for 120, 277, and 347 Line volts • DF for 208, 240, and 480 Line volts • Hight temperature fuse holders factory installed inside the fixture housing. • Fuse is included. OPTIONAL BACKUP BATTERY • Integral battery backup provides emergency path of egress lighting for the required 90 minutes for 0°C ambient. CAUTION: • Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious personal injury. CERTIFICATIONS AND LISTINGS • Listed to UL1598 and CSA C22.2#250.0- 24 for wet locations and 40˚C ambient temperatures • IEC 66262 Mechanical Impact Code IK08 • IP66 certified • RoHS compliant • This product qualifies as a “designated country construction material” per FAR 52.225-11 Buy American-Construction Materials under Trade Agreements effective 04/16/2020. See Buy American Solutions. WARRANTY • 5 year warranty • See HLI Standard Warranty for additional information • † PRECOMMISSIONED SITESYNC ORDERING INFORMATION: When ordering a fixture with the SiteSync lighting control option, additional information will be required to complete the order. The SiteSync Commissioning Form or alternate schedule information must be completed. This form includes Project location, Group information, and Operating schedules. For more detailed information please visit www.HubbellLighting.com/products/ sitesync or contact Hubbell Lighting tech support at (800) 345-4928 • Examples: WDS-D-48L-55-3K7-1-UNV-BLS-PC-SF SPECIFICATIONS (CONT') Fixture Housing 1 mA Max Gray Dimming Lead (-) Standard Input Black (+) White (-) Green (GND) Purple Dimming Lead (+) (L) (N) Index Page3/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDS/D/24L-30/4K7/3/UNV/*** Notes: Type: WP3 INDY22-104626 WDS WALL MOUNTED © 2021 Kim Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Blvd • Greenville, SC 29607 / Tel 864.678.1000 / Website www.kimlighting.com Page 4/9 Rev. 11/17/21 WDS DATE:LOCATION: TYPE:PROJECT: CATALOG #: DIMENSIONS DELIVERED LUMENS Above / Below (Depending on mounting) Front Side Back 13.0” (330.20 mm) 8.6” (218.44 mm)13.0” (330.20 mm) 4.3” (109.22 mm) 8.9” (226.06 mm) 4.3” (109.22 mm) 6.2” (157.48 mm) Weight: 20 lbs LEDs#Drive Current Lumens Package Nominal Watts Lens Options Distribution 3000K 70CRI 4000K 70CRI 5000K 70CRI Lumen BUG Rating lm/w Lumen BUG Rating lm/w Lumen BUG Rating lm/w B U G B U G B U G 24L 350mA 3,000 30 Clear 1 3433 1 0 0 119 3519 1 0 0 122 3560 1 0 0 123 2 3351 1 0 1 116 3436 1 0 1 119 3475 1 0 1 120 3 3340 1 0 1 116 3424 1 0 1 119 3463 1 0 1 120 4F 3343 1 0 1 116 3427 1 0 1 119 3466 1 0 1 120 4W 3267 1 0 1 113 3349 1 0 1 116 3387 1 0 1 117 SP 3600 3 0 0 125 3691 3 0 0 128 3733 3 0 0 129 Diffused WG 3144 1 0 1 109 3223 2 0 1 112 3260 2 0 1 113 FTD 2855 1 0 1 99 2927 1 0 1 101 2960 1 0 1 103 WTD 3151 1 0 1 109 3230 1 0 1 112 3267 1 0 1 113 500mA 4,500 40 Clear 1 4593 1 0 0 111 4708 1 0 0 113 4762 1 0 0 115 2 4484 1 0 1 108 4596 1 0 1 111 4649 1 0 1 112 3 4468 1 0 1 108 4581 1 0 1 110 4633 1 0 1 112 4F 4472 1 0 1 108 4585 1 0 1 110 4637 1 0 1 112 4W 4370 1 0 2 105 4480 1 0 2 108 4531 1 0 2 109 SP 4817 3 0 0 116 4938 3 0 0 119 4994 3 0 0 120 Diffused WG 4206 2 0 1 101 4312 2 0 1 104 4361 2 0 1 105 FTD 3819 1 0 1 92 3915 1 0 1 94 3960 1 0 1 95 WTD 4215 1 0 1 102 4321 1 0 1 104 4371 1 0 1 105 Index Page4/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDS/D/24L-30/4K7/3/UNV/*** Notes: Type: WP3 INDY22-104626 WDS WALL MOUNTED © 2021 Kim Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Blvd • Greenville, SC 29607 / Tel 864.678.1000 / Website www.kimlighting.com Page 5/9 Rev. 11/17/21 WDS DATE:LOCATION: TYPE:PROJECT: CATALOG #: DELIVERED LUMENS (CONTINUED) LEDs#Drive Current Lumens Package Nominal Watts Lens Options Distribution 3000K 70CRI 4000K 70CRI 5000K 70CRI Lumen BUG Rating lm/w Lumen BUG Rating lm/w Lumen BUG Rating lm/w B U G B U G B U G 24L 725mA 6,000 60 Clear 1 6333 1 0 1 108 6492 1 0 1 111 6566 1 0 1 112 2 6182 1 0 1 106 6338 1 0 1 108 6410 1 0 1 110 3 6161 1 0 2 105 6316 1 0 2 108 6388 1 0 2 109 4F 6166 1 0 2 105 6321 1 0 2 108 6393 1 0 2 109 4W 6025 1 0 2 103 6177 1 0 2 106 6248 1 0 2 107 SP 6641 4 0 0 114 6808 4 0 0 116 6886 4 0 0 118 Diffused WG 5800 2 0 1 99 5945 2 0 1 102 6013 2 0 1 103 FTD 5266 1 0 1 90 5398 2 0 1 92 5460 2 0 1 93 WTD 5812 1 0 1 99 5958 1 0 1 102 6026 1 0 1 103 925mA 7,500 75 Clear 1 7879 1 0 1 106 8077 1 0 1 109 8170 1 0 1 110 2 7692 1 0 1 104 7885 1 0 1 107 7975 1 0 2 108 3 7665 1 0 2 104 7858 1 0 2 106 7948 1 0 2 107 4F 7672 1 0 2 104 7865 1 0 2 106 7955 1 0 2 107 4W 7497 1 0 2 101 7685 1 0 2 104 7773 1 0 2 105 SP 8263 4 0 0 112 8471 4 0 0 114 8567 4 0 0 116 Diffused WG 7216 3 0 1 98 7397 3 0 1 100 7482 3 0 1 101 FTD 6552 2 0 1 89 6717 2 0 1 91 6793 2 0 2 92 WTD 7231 2 0 1 98 7413 2 0 1 100 7498 2 0 1 101 Index Page5/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDS/D/24L-30/4K7/3/UNV/*** Notes: Type: WP3 INDY22-104626 WDS WALL MOUNTED © 2021 Kim Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Blvd • Greenville, SC 29607 / Tel 864.678.1000 / Website www.kimlighting.com Page 6/9 Rev. 11/17/21 WDS PHOTOMETRY WDS-D-24L-75-4K7-1 WDS-D-24L-75-4K7-2 WDS-D-24L-75-4K7-3 LUMINAIRE DATA LUMINAIRE DATA LUMINAIRE DATA ISOFOOT CANDLE PLOT ISOFOOT CANDLE PLOT ISOFOOT CANDLE PLOT Description 4000K, 70CRI Delivered Lumens 8077 Watts 74 Efficacy 109.1 IES Type I BUG Rating B1-U0-G1 Mounting Height 15 ft Grid Scale 15 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 7166 88.7% Downward House Side 912 11.3% Downward Total 8077 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 8077 100% Description 4000K, 70CRI Delivered Lumens 7885 Watts 74 Efficacy 106.6 IES Type II BUG Rating B1-U0-G1 Mounting Height 15 ft Grid Scale 15 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 6393 81.1% Downward House Side 1492 18.9% Downward Total 7885 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 7885 100% Description 4000K, 70CRI Delivered Lumens 7858 Watts 74 Efficacy 106.2 IES Type III BUG Rating B1-U0-G2 Mounting Height 15 ft Grid Scale 15 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 6551 83.4% Downward House Side 1307 16.6% Downward Total 7858 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 7858 100% 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 Index Page6/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDS/D/24L-30/4K7/3/UNV/*** Notes: Type: WP3 INDY22-104626 WDS WALL MOUNTED © 2021 Kim Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Blvd • Greenville, SC 29607 / Tel 864.678.1000 / Website www.kimlighting.com Page 7/9 Rev. 11/17/21 WDS PHOTOMETRY WDS-D-24L-75-4K7-4F WDS-D-24L-75-4K7-4W WDS-D-24L-75-4K7-FTD LUMINAIRE DATA LUMINAIRE DATA LUMINAIRE DATA ISOFOOT CANDLE PLOT ISOFOOT CANDLE PLOT ISOFOOT CANDLE PLOT Description 4000K, 70CRI Delivered Lumens 7865 Watts 74 Efficacy 106.3 IES Type III BUG Rating B1-U0-G2 Mounting Height 15 ft Grid Scale 15 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 6782 86.2% Downward House Side 1083 13.8% Downward Total 7865 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 7865 100% Description 4000K, 70CRI Delivered Lumens 7685 Watts 74 Efficacy 103.9 IES Type III BUG Rating B1-U0-G2 Mounting Height 15 ft Grid Scale 15 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 6794 88.4% Downward House Side 892 11.6% Downward Total 7685 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 7685 100% Description 4000K, 70CRI Delivered Lumens 6717 Watts 74 Efficacy 90.8 IES Type III BUG Rating B2-U0-G1 Mounting Height 15 ft Grid Scale 15 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 4462 66.4% Downward House Side 2255 33.6% Downward Total 6717 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 6717 100% 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 Index Page7/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDS/D/24L-30/4K7/3/UNV/*** Notes: Type: WP3 INDY22-104626 WDS WALL MOUNTED © 2021 Kim Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Blvd • Greenville, SC 29607 / Tel 864.678.1000 / Website www.kimlighting.com Page 8/9 Rev. 11/17/21 WDS PHOTOMETRY WDS-D-24L-75-4K7-SP WDS-D-24L-75-4K7-WG WDS-D-24L-75-4K7-WTD LUMINAIRE DATA LUMINAIRE DATA LUMINAIRE DATA ISOFOOT CANDLE PLOT ISOFOOT CANDLE PLOT ISOFOOT CANDLE PLOT Description 4000K, 70CRI Delivered Lumens 8471 Watts 74 Efficacy 114.5 IES Type VS BUG Rating B4-U0-G0 Mounting Height 15 ft Grid Scale 15 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 4236 50.0% Downward House Side 4236 50.0% Downward Total 8471 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 8471 100% Description 4000K, 70CRI Delivered Lumens 7396 Watts 74 Efficacy 99.9 IES Type I BUG Rating B3-U0-G1 Mounting Height 15 ft Grid Scale 15 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 4931 66.7% Downward House Side 2465 33.3% Downward Total 7396 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 7396 100% Description 4000K, 70CRI Delivered Lumens 7413 Watts 74 Efficacy 100.2 IES Type I BUG Rating B2-U0-G1 Mounting Height 15 ft Grid Scale 15 ft ZONAL LUMEN SUMMARY Zone Lumens % Luminaire Downward Street Side 5341 72.1% Downward House Side 2072 27.9% Downward Total 7413 100% Upward Street Side 0 0% Upward House Side 0 0% Upward Total 0 0% Total Flux 7413 100% 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 4 3 2 1 0 1 2 3 4 3 2 1 0 1 2 3 4 Index Page8/9Submitted On: Nov 14, 2022 Submitted by ESL-Spectrum Job Name: Project Bridge Catalog Number: WDS/D/24L-30/4K7/3/UNV/*** Notes: Type: WP3 INDY22-104626 WDS WALL MOUNTED © 2021 Kim Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Blvd • Greenville, SC 29607 / Tel 864.678.1000 / Website www.kimlighting.com Page 9/9 Rev. 11/17/21 WDS 0% 20% 40% 60% 80% 100% 380 430 480 530 580 630 680 730 780Relative PowerWavelength (nm) Reference Source Test Source SPECTRAL POWER DISTRIBUTION COMPARISONSPECTRAL POWER DISTRIBUTION COMPARISON ELECTRICAL DATA TM-30 DATA COLOR VECTOR GRAPHIC SPECTRAL POWER DISTRIBUTION COMPARISONTEST SOURCE Reference Illuminant Test Source DATE:LOCATION: TYPE:PROJECT: CATALOG #: Rf 68 Rg 99 CCT(K)3947 DUV 0.0004 x 0.3831 y 0.3793 CIE Ra 72 Wavelength (nm)Relative PowerReference Illuminant Test Source COLOR VECTOR GRAPHIC Dimming Drive Current System Watts Line Voltage Amps AC Min. Power Factor Max THD (%)Dimming Range Source current out of 0-10V Absolute voltage range on 0-10V (+) Min Max Min MaxVACHz120208240277347480 350mA 29 120-480 50/60 0.24 0.14 0.12 0.10 0.08 0.06 >0.9 20 10% to 100%0mA 1mA 0V 10V500mA420.38 0.22 0.19 0.16 0.13 0.09 725mA 59 0.48 0.27 0.24 0.21 0.16 0.12 925mA 74 0.67 0.39 0.34 0.29 0.23 0.17 TM-21 Lifetime Calculation - Projected Lumen Maintenance (25°C / 77°C) Ambient Temp.0 25,000 36,000 50,000 100,000 Reported L70 25°C / 77°F 100%97%95%93%86%60khrs40°C / 104°F 100%92%89%86%75% CRI Lumen Multiplier CCT 70 CRI 80 CRI 90 CRI 3000K 1 0.9119 0.7033 4000K 1 0.8941 0.734 5000K 1 0.879 0.7712 Amber Multiplier CCT Multiplier 5000K 1 AM 0.1727 2700K Multiplier CCT Multiplier 5000K 1 2700K 0.897 Index Page9/9Submitted On: Nov 14, 2022