HomeMy WebLinkAboutS1 & S1B - STERNBERG A655LEDLED
Mounting Configuration
(Click here to link to mounting configuration specification page)
• 1W • 2A • 3A90 • 1AM
• PT • 2A90 • 3APT • 2AM
• 1A • 2APT • 4A • 450PB
• 1APT • 3A • 4APT
W = Wall Mount PT = Post Top A = Arm Mount AM = Arm Mid-
Mount PB = Pier Base
Fixture
• A65LED
Fitter
• 5P1 • 9911 • 9951 • OL3
• 73 • 9921 • BD4 • OL4
• 74 • 9931 • BD5 • 588
• 9901 • 9941 • BD7 • C20971,2
1 Add “T” after fitter designation for optional “Twist-lock” fitter.
2 Consult factory for use on concrete poles.
LED
• 4L
CCT - Color Temperature (K)
• 27(00) • 30(00) • 35(00) • 40(00) • 50(00)
Type
• T3 • T4 • T5
Driver
• MDL02 (120v-277v, 250mA)
• MDL03 (120v-277v, 350mA)
• MDL05 (120v-277v, 500mA)
• MDL06 (120v-277v, 630mA)
• MDH02 (347v-480v, 250mA)
• MDH03 (347v-480v, 350mA)
• MDH05 (347v-480v, 500mA)
• MDH06 (347v-480v, 630mA)
Lens
• A (Acrylic Lens)
Options (Click here to view accessories sheet)
• R3 3-Pin control receptacle only
• R53 5-Pin control receptacle only
• R73 7-Pin control receptacle only
• PE4 Twist-Lock Photocontrol (120v-277v)
• PE34 Twist-Lock Photocontrol (347v)
• PE44 Twist-Lock Photocontrol (480v)
• SC4 Shorting Cap
• PEC Electronic Button Photocontrol (120v-277v)
• PEC4 Electronic Button Photocontrol (480v)
• FHD5 Double Fuse and Holder
• CDR Cast Decorative Ring
• CDRCL6 Cast Decorative Ring with Custom Logo
• PBDR7 Perforated Brass Decorative Ring
• GFI3 15A Duplex GFI for Utility Fitter
• TB3 Terminal Block
• HSS 120º House Side Shield
3 For 900 series utility fitter only.
4 Requires control receptacle.
5 Ships loose for installation in base.
6 Consult factory for specification details.
7 Standard is polished, for painted ring specify PBDR-P.
Arm (Click here to link to arm specification page)
See Arms & Wall Brackets specification sheets.
• 50 • 478 • 80 • 55 • 579 • TASCR
• 78 • 70 • 480 • 6236 • TA • 39
Pole (Click here to link to pole specification page)
See Pole specification sheets.
Finish
Standard Finishes8
• BKT Black Textured
• WHT White Textured
• PGT Park Green Textured
• ABZT Architectural Medium Bronze Textured
• DBT Dark Bronze Textured
8 Smooth finishes are available upon request
Custom Finishes9
• OI Old Iron
• RT Rust
• WBR Weathered Brown
• CD Cedar
• WBK Weathered Black
• TT Two Tone
9 Custom colors require upcharge.
Sternberg Select Finishes
• VG Verde Green
• SI Swedish Iron
• OWGT Old World Gray Textured
Specifications
Fixture
The Princeton series is a stylized Victorian acorn
fixture which consists of a decorative cast alumi-
num fitter and high effeciency prismatic acrylic
acorn. It shall be appointed with a cast aluminum
decorative 4-vane finial. The Luminaire shall be
UL listed in US and Canada.
Fitter - Standard
The fitter shall be heavy wall cast aluminum,
356 alloy for high tensile strength. It shall have
an 8-1/2” inside diameter opening to attach to
the 8” neck of the acorn globe. When ordered
with a Sternberg aluminum pole, the fitter shall
be welded to the pole top or tenon for safety
and to ensure the fixture will be plumb, secure
and level over the life of the installation. The
fitter shall have a one-piece ring bug gasket to
resist insect penetration into lamp assembly.
900 Series Utility Fitter Option
The fitter shall be heavy wall cast aluminum,
360 die cast alloy for high tensile strength. It
shall have a 9-1/4” inside diameter opening
to attach to the 8” neck of the acorn globe. It
shall have a hinged, tool-less entry door that
provides open access to all of the components.
The 900 series shall have an optional terminal
block for ease of wiring, an optional Twist-Lock
Photocontrol receptacle, an optional single
GFCI outlet for auxiliary power needs. The top
mounted driver mounting plate shall be cast
aluminum and provide tool-less removal from
the housing using 2 finger latches. The fitter
shall have a one-piece ring gasket to resist
insect penetration into globe assembly. When
supplied with GFCI receptacle a hole will be
provided for cord and plug installation with the
access door closed. When cord and plug is not
in use a filler plug will be provided and shall
be tethered to the fitter for easy recovery and
installation.
2/21 STERNBERG LIGHTING. ALL RIGHTS RESERVED. PRINTED IN THE USA.
800-621-3376
555 Lawrence Ave., Roselle, IL 60172
info@sternberglighting.com
www.sternberglighting.com
See next page
A65LED PRINCETON SERIES
JOB NAME
FIXTURE TYPE
MEMO
EPA
2.06 (ft2)
WEIGHT
15 LBS
7 YEAR
WARRANTY
LUMEN
RANGE
4,310 to
10,570
LIFE SPAN
L70
MINIMUM
100,000
HOURS
UL
LISTED
CLICK
FOR FAQ’s
BUILD A PART NUMBER
ORDERING EXAMPLE: 2A-A65LED-5P-4L40T3-MDL05-A-PEC-FHD/480PM/4212FP4/FCC/BKT
Mounting
Config.Fixture Fitter LED CCT Type Driver Lens
Option
Control
Receptacle
Option
Control
Option
Fuse
Option
Decorative
Ring
Option
GFI
Option
Terminal
Block
Option
House
Side
Shield
Arm
See Arm
Spec Sheets
Pole
See Pole
Spec Sheets
Finish
LED
2/21 STERNBERG LIGHTING. ALL RIGHTS RESERVED. PRINTED IN THE USA.
800-621-3376
555 Lawrence Ave., Roselle, IL 60172
info@sternberglighting.com
www.sternberglighting.com
A65LED PRINCETON SERIES
Twist-Lock Fitter (Optional)
The TL (Twist-Lock) fitter shall have an alu-
minum die-cast twist-lock mechanism. The
tool-less 1/4 turn action allows for easy globe
removal and replacement. A die-cast ring as-
sembly is mechanically attached to the globe
and is removable if the globe is broken or
replaced.
LED’s
The luminaire shall use high output, high
brightness LED’s. The Chip on Board (COB)
LED components are mounted to vertical heat
sinks. The LED’s and printed circuit boards
shall be 100% recyclable; they shall also be
protected from moisture and corrosion by a
conformal coating of 1 to 3 mils. They shall not
contain lead, mercury or any other hazard-
ous substances and shall be RoHS compliant.
The LED life rating data shall be determined
in accordance with IESNA LM-80. The High
Performance white LED’s will have a life
expectancy of approximately 100,000 hours
with not less than 70% of original brightness
(lumen maintenance), rated at 25°C. The High
Brightness, High Output LED’s shall be 4000K
(2700K, 3000K, 3500K or 5000K option)
color temperature with a minimum CRI of 70.
Consult factory for custom color CCT. The
luminaire shall have a minimum ______ (see
table) delivered initial lumen rating when oper-
ated at steady state with an average ambient
temperature of 25°C (77°F).
Optics
The luminaire shall be provided with refractor
type optics from external pristmatic acorn. Test-
ing shall be done in accordance with IESNA
LM-79.
Electronic Drivers
The LED driver shall be U.L. Recognized. It shall
be securely mounted inside the fixture, for
optimized performance and longevity. It shall
be supplied with a quick-disconnect electrical
connector on the power supply, providing easy
power connections and fixture installation.
It shall have overload as well as short circuit
protection, and have a DC voltage output,
constant current design, 50/60HZ. It shall
be supplied with line-ground, line-neutral and
neutral-ground electrical surge protection in ac-
cordance with IEEE/ANSI C62.41.2 guidelines.
It shall be dimmable using a 0-10v signal.
For sources over 50w: The driver shall have a
minimum efficiency of 90%. The driver shall be
rated at full load with THD<20% and a power
factor of greater than 0.90. The driver shall
contain over-heat protection
For sources under 50w: The driver shall have a
minimum efficiency of 88%.
Photocontrols
Button Style: On a single assembly the pho-
tocontrol shall be mounted on the fixture and
pre-wired to driver. On multiple head assem-
bly’s the photocontrol shall be mounted in the
pole shaft on an access plate. The electronic
button type photocontrol is instant on with a
5-10 second turn off, and shall turn on at 1.5
footcandles with a turn-off at 2-3 footcandles.
Photocontrol is 120-277 volt and warranted for
6 years.
Twist-Lock Style: The photocontrol shall be
mounted in the utility fitter and pre-wired to
driver. The twist lock type photocontrol is
instant on with a 3-6 second turn off, and shall
turn on at 1.5 footcandles with a turn-off at 2-3
footcandles. Photocontrol is 120-277 volt and
warranted for 6 years. Warranty
Seven-year limited warranty. See product and fin-
ish warranty guide for details.
Finish
Refer to website for details.
Performance
LIGHT SOURCE T3 INITIAL LUMENS EFFICACY (LPW)T4 INITIAL LUMENS EFFICACY (LPW)T5 INITIAL LUMENS EFFICACY (LPW)WATTAGE
4L27T_-MDL06 9025 92.1 8985 91.7 9260 94.5 98
4L30T_-MDL06 9970 101.7 9925 101.3 10230 104.4 98
4L40T_-MDL06 10300 105.1 10250 104.6 10570 107.9 98
4L27T_-MDL05 7445 99.3 7405 98.7 7580 101.1 75
4L30T_-MDL05 8225 109.7 8175 109.0 8370 111.6 75
4L40T_-MDL05 8500 113.3 8450 112.7 8650 115.3 75
4L27T_-MDL03 5865 106.6 5815 105.7 5920 107.6 55
4L30T_-MDL03 6480 117.8 6420 116.7 6540 118.9 55
4L40T_-MDL03 6695 121.7 6635 120.6 6760 122.9 55
4L27T_-MDL02 4330 108.3 4310 107.8 4370 109.3 40
4L30T_-MDL02 4785 119.6 4760 119.0 4825 120.6 40
4L40T_-MDL02 4945 123.6 4920 123.0 4985 124.6 40
LED
2/21 STERNBERG LIGHTING. ALL RIGHTS RESERVED. PRINTED IN THE USA.
800-621-3376
555 Lawrence Ave., Roselle, IL 60172
info@sternberglighting.com
www.sternberglighting.com
A65LED PRINCETON SERIES
Fixtures
A65LED-5P CDR Option
CDR-CL
Custom Logo
or Medallion
PBDR
Perforated Brass
Decorative Ring37-1/2” 37-1/2”
15-7/8”18”
Fitters
*Twist Lock Acorn (Fitter TL)
5P or 5T*
Fits 3” OD
x 3” tall
tenon/pole
BD4
Fits 4” OD
x 5” tall
tenon/pole
BD5
Fits 5” OD
x 6” tall
tenon/pole
BD7
Fits 7” OD
x 1” tall
tenon/pole
73
Fits 3” OD
x 4” tall
tenon/pole
74
Fits 4” OD
x 4” tall
tenon/pole
10-1/8” W
10-3/8” H
10-1/8” W
10-1/8” H
10-1/8” W
10-1/4” H
10-1/8” W
11-3/4” H
9-3/4” W
13-1/4” H
588
(Art Deco 1)
Fits 3” OD
x 3” tall
tenon/pole
990 or 990T*
Fits 3” OD
x 3” tall
tenon/pole
994 or 994T*
Fits 4” OD
x 3” tall
tenon/pole
991 or 991T*
Fits 3” OD
x 3” tall
tenon/pole
992 or 992T*
Fits 3” OD
x 3” tall
tenon/pole
993 or 993T*
Fits 3” OD
x 3” tall
tenon/pole
995 or 995T*
Fits 4” OD
x 3” tall
tenon/pole
OL3
Fits 3” OD
x 3” tall
tenon/pole
OL4
Fits 4” OD
x 3” tall
tenon/pole
C2097 or
C2097T*
Fits 7” OD
x 1” tall
tenon/pole
14-1/2” W
14-1/4” H
10-1/2” W
15-3/4” H
10-1/2” W
13-1/8” H
10-1/2” W
13-1/8” H
10-1/2” W
15-3/4” H
10-1/2” W
11-3/8” H
10” W
3-1/4” H
10 3/8"
10 1/8"
10 1/8"
10 1/8"
10 1/4"
10 1/8"
11 3/4"
10 1/8"
11 3/4"
10 1/8"
13 1/4"
9 3/4"
14 1/4"
14 1/2"
15 3/4"
10 1/2"
13 1/8"
10 1/2"
13 1/8"
10 1/2"
15 3/4"
10 1/2"
11 3/8"
10 1/2"
3 1/4"
10"
5P BD4 BD5 B7 BD7 7 588
990 991 992 993 OLF OLF
10 3/8"
10 1/8"
10 1/8"
10 1/8"
10 1/4"
10 1/8"
11 3/4"
10 1/8"
11 3/4"
10 1/8"
13 1/4"
9 3/4"
14 1/4"
14 1/2"
15 3/4"
10 1/2"
13 1/8"
10 1/2"
13 1/8"
10 1/2"
15 3/4"
10 1/2"
11 3/8"
10 1/2"
3 1/4"
10"
5P BD4 BD5 B7 BD7 7 588
990 991 992 993 OLF OLF
10 3/8"
10 1/8"
10 1/8"
10 1/8"
10 1/4"
10 1/8"
11 3/4"
10 1/8"
11 3/4"
10 1/8"
13 1/4"
9 3/4"
14 1/4"
14 1/2"
15 3/4"
10 1/2"
13 1/8"
10 1/2"
13 1/8"
10 1/2"
15 3/4"
10 1/2"
11 3/8"
10 1/2"
3 1/4"
10"
5P BD4 BD5 B7 BD7 7 588
990 991 992 993 OLF OLF
10 3/8"
10 1/8"
10 1/8"
10 1/8"
10 1/4"
10 1/8"
11 3/4"
10 1/8"
11 3/4"
10 1/8"
13 1/4"
9 3/4"
14 1/4"
14 1/2"
15 3/4"
10 1/2"
13 1/8"
10 1/2"
13 1/8"
10 1/2"
15 3/4"
10 1/2"
11 3/8"
10 1/2"
3 1/4"
10"
5P BD4 BD5 B7 BD7 7 588
990 991 992 993 OLF OLF
10 3/8"
10 1/8"
10 1/8"
10 1/8"
10 1/4"
10 1/8"
11 3/4"
10 1/8"
11 3/4"
10 1/8"
13 1/4"
9 3/4"
14 1/4"
14 1/2"
15 3/4"
10 1/2"
13 1/8"
10 1/2"
13 1/8"
10 1/2"
15 3/4"
10 1/2"
11 3/8"
10 1/2"
3 1/4"
10"
5P BD4 BD5 B7 BD7 7 588
990 991 992 993 OLF OLF
10 3/8"
10 1/8"
10 1/8"
10 1/8"
10 1/4"
10 1/8"
11 3/4"
10 1/8"
11 3/4"
10 1/8"
13 1/4"
9 3/4"
14 1/4"
14 1/2"
15 3/4"
10 1/2"
13 1/8"
10 1/2"
13 1/8"
10 1/2"
15 3/4"
10 1/2"
11 3/8"
10 1/2"
3 1/4"
10"
5P BD4 BD5 B7 BD7 7 588
990 991 992 993 OLF OLF
10 3/8"
10 1/8"
10 1/8"
10 1/8"
10 1/4"
10 1/8"
11 3/4"
10 1/8"
11 3/4"
10 1/8"
13 1/4"
9 3/4"
14 1/4"
14 1/2"
15 3/4"
10 1/2"
13 1/8"
10 1/2"
13 1/8"
10 1/2"
15 3/4"
10 1/2"
11 3/8"
10 1/2"
3 1/4"
10"
5P BD4 BD5 B7 BD7 7 588
990 991 992 993 OLF OLF
10 3/8"
10 1/8"
10 1/8"
10 1/8"
10 1/4"
10 1/8"
11 3/4"
10 1/8"
11 3/4"
10 1/8"
13 1/4"
9 3/4"
14 1/4"
14 1/2"
15 3/4"
10 1/2"
13 1/8"
10 1/2"
13 1/8"
10 1/2"
15 3/4"
10 1/2"
11 3/8"
10 1/2"
3 1/4"
10"
5P BD4 BD5 B7 BD7 7 588
990 991 992 993 OLF OLF
10 3/8"
10 1/8"
10 1/8"
10 1/8"
10 1/4"
10 1/8"
11 3/4"
10 1/8"
11 3/4"
10 1/8"
13 1/4"
9 3/4"
14 1/4"
14 1/2"
15 3/4"
10 1/2"
13 1/8"
10 1/2"
13 1/8"
10 1/2"
15 3/4"
10 1/2"
11 3/8"
10 1/2"
3 1/4"
10"
5P BD4 BD5 B7 BD7 7 588
990 991 992 993 OLF OLF
10 3/8"
10 1/8"
10 1/8"
10 1/8"
10 1/4"
10 1/8"
11 3/4"
10 1/8"
11 3/4"
10 1/8"
13 1/4"
9 3/4"
14 1/4"
14 1/2"
15 3/4"
10 1/2"
13 1/8"
10 1/2"
13 1/8"
10 1/2"
15 3/4"
10 1/2"
11 3/8"
10 1/2"
3 1/4"
10"
5P BD4 BD5 B7 BD7 7 588
990 991 992 993 OLF OLF
10 3/8"
10 1/8"
10 1/8"
10 1/8"
10 1/4"
10 1/8"
11 3/4"
10 1/8"
11 3/4"
10 1/8"
13 1/4"
9 3/4"
14 1/4"
14 1/2"
15 3/4"
10 1/2"
13 1/8"
10 1/2"
13 1/8"
10 1/2"
15 3/4"
10 1/2"
11 3/8"
10 1/2"
3 1/4"
10"
5P BD4 BD5 B7 BD7 7 588
990 991 992 993 OLF OLF
10 3/8"
10 1/8"
10 1/8"
10 1/8"
10 1/4"
10 1/8"
11 3/4"
10 1/8"
11 3/4"
10 1/8"
13 1/4"
9 3/4"
14 1/4"
14 1/2"
15 3/4"
10 1/2"
13 1/8"
10 1/2"
13 1/8"
10 1/2"
15 3/4"
10 1/2"
11 3/8"
10 1/2"
3 1/4"
10"
5P BD4 BD5 B7 BD7 7 588
990 991 992 993 OLF OLF