Loading...
HomeMy WebLinkAboutGE EWLS LED Wallpack SpecificationsEWLS L Series LED Wall Pack The Evolve® LED L Series Wall Pack (EWLS), The Evolve LED L-Series Wall Pack, EWLS, is a designed replacement for 50W to 250W HID, while offering significant energy savings in a long-life LED wall pack. Two-screw housing design enables a fast and simplified installation. The low-watt Egress package is designed to meet recommended illuminance requirements for egress applications such as side and rear exit doors in commercial buildings. Available with Emergency Battery Backup option. Construction Housing:Aluminum die cast enclosure. Integral heat sink for maximum heat transfer Lens:Impact resistant tempered glass Paint: Corrosion resistant polyester powder paint, minimum 2.0 mil thickness Color: Black, Dark Bronze, Gray & White (RAL & custom colors available) Optional = Coastal Finish Weight:8.5lbs (4 kg) Electrical Input Voltage:120-277V & 347V Input Frequency:50/60Hz Power Factor: > 90% at rated watts Total Harmonic Distortion: ≤ 20% at rated watts Lumens:1,700 to 7,000 Distribution:Asymmetric Forward Efficacy:117- 148 LPW CCT:2700, 3000K, 4000K, 5000K CRI:≥70 Optical System Warranty 5 Year (Standard) Surge Protection Controls Dimming:Standard - 0-10V Sensors:Photo Electric Sensors (PE) available Motion Sensor LUMEN CODES DISTRIBUTION LXX(10K) @ HOURS 25,000 HR 50,000 HR 60,000 HR 17, 25 & 40 AF L99 L99 L99 70 AF L94 L87 L85 Note: Projected Lxx based on LM80 (≥ 10,000 hour testing). Accepted Industry toler- ances apply to initial luminous flux and lumen maintenance measurements. Lumen Maintenance Projected Lxx per IES TM-21-11 at 25°C Luminaire Ambient Temperature Factor AMBIENT TEMP (°C)INITIAL FLUX FACTOR AMBIENT TEMP (°C)INITIAL FLUX FACTOR 10 1.02 30 0.99 20 1.01 40 0.98 25 1.00 50 0.97 Operating Temperature:-40°C to 50°C Vibration: 3G per ANSI C136.31-2010 LM-79:Testing in accordance with IESNA Standards Ratings Surge Protection 10kV/5kA (Standard) 3kV/1.5kA (EMBB) Provides reliable emergency operations when there is a loss to normal power, supported by Independent Secondary Battery. • Hold-Up Time: 90 minutes @ 1,400 lumens. • Meet egress light level and uniformity requirements • Not available in 347V • Operating Temperature (for EMBB models) 0° to 40°C • 3kV/1.5kA surge protection for EMBB models. Emergency Battery Backup *Per ANSI C136.2-2015 IP66 Optical Not all product variations listed on this page are DLC qualified. Visit www.designlights.org/search to confirm qualifications. UL15 98 PROJECT NAME DATE TYPE CATALOG NUMBER CUSTOMER NAME LED.com © 2023 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 1 of 5 (Rev 06/27/23) OLP3127-Evolve EWLS Wall Pack Spec Sheet_R04 Arize EWLS L Series LED Wall Pack PROJECT NAME DATE TYPE CATALOG NUMBER CUSTOMER NAME E W L S _ 02 _ _ _ _ AF _ _ 70 _ _ _ _ _ _ _ _ _ _ _ _ _ _ PROD. ID GEN VOLTAGE OPTIC CODE DISTRIBUTION CRI (MIN)CCT DIMMING PE FUNCTION MOUNTING COLOR OPTIONS E = Evolve 02 0 = 120-277V 17 = 1,700 lm2 AF = Asymmetric Forward 7 = 70 27 = 2700K3 N = No External Dimming Leads 1 = None CB = Conduit Box Mount4 BLCK = Black EMBB = Emergency Battery Backup5,6 W = Wallpack 1 = 120V1 25 = 2,500 lm 30 = 3000K3 D = External Dimming Leads5 3 = Button PE7 FM = Flush Mount DKBZ = Dark Bronze H = Motion Sensor (Wattstopper)6, 8, 9 LS = L-Series 2 = 208V1 40 = 4,000 lm 40 = 4000K GRAY = Gray XXX = Special Options 3 = 240V1 70 = 7,000 lm 50 = 5000K W = Non-Graphical White Box 4 = 277V1 8 = 120-240V10 D = 347V1 OPTIC CODE DISTRIBUTION TYPICAL INITIAL LUMENS TYPICAL SYSTEM WATTAGE BUG RATINGS 2700K-5000K 2700K 3000K 4000K/ 5000K 120-277V 347V B-U-G 17 AF 1400 1600 1700 12 14 B1-U0-G0 25 2200 2400 2500 17 19 B1-U0-G1 40 3500 3800 4000 27 29 B1-U0-G1 70 6100 6700 7000 52 54 B2-U0-G1 EMBB -1300 1400 1400 --B1-U0-G0 1 Specify single voltage if Button PE option is selected 2 Optic code 17 - Not offered in 120-277V, use 120 240V 3 Select 2700K or 3000K CCT for IDA approved units 4 Must be selected when ordering with Button PE, Motion Sensor, 347V or Emergency Battery Backup 5 Not available with motion sensor 6 Not available in 347V 7 Button PE not available with EMBB. Button PE not available with H Motion Sensor. Motion sensor includes dusk-to-dawn control as well as motion control. 8 WS FSIR-100 (Sku# 197634) needed for programming sensor. 9 Must select Controls "N" with Motion Sensor "H" For additional information on EWLS IES files, please refer to LED.com Ordering Information LED.com © 2023 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 2 of 5 (Rev 06/27/23) OLP3127-Evolve EWLS Wall Pack Spec Sheet_R04 Arize EWLS L Series LED Wall Pack PROJECT NAME DATE TYPE CATALOG NUMBER CUSTOMER NAME 70AF ASYMMETRIC FORWARD 7000 LUMEN EWLS02_70AF750___-120-277V.ies EMBB Mode ASYMMETRIC FORWARD 1400 LUMEN EWLS02_EMBB___.ies 0.512 0.512 • Mounting Height at 10’ • Initial Footcandle at Grade • Light Level: 0.5fc, 1fc, 2fc — Vertical plane through horizontal angle of Max. Cd at 0° — Horizontal cone through vertical angle of Max. Cd at 27° • Mounting Height at 10’ • Initial Footcandle at Grade • Light Level: 0.5fc, 1fc, 2fc — Vertical plane through horizontal angle of Max. Cd at 295° — Horizontal cone through vertical angle of Max. Cd at 55° LED.com © 2023 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 3 of 5 (Rev 06/27/23) OLP3127-Evolve EWLS Wall Pack Spec Sheet_R04 Arize EWLS L Series LED Wall Pack PROJECT NAME DATE TYPE CATALOG NUMBER CUSTOMER NAME H Motion Sensing Option Intended for 8-25ft mounting heights Provides coverage area radius for walking motion of 25-30 ft Provides 180° degree coverage (180° degree blocked by wall) Integrated Photoelectric control Default Settings: Output: Occupied - 100%/Unoccupied - 50% 10% dimming after 5 minutes with no occupancy Adds < 1W to fixture power rating Field programmable using FSIR-100 hand held programmer SKU # 197634 (WS FSIR-100) GE Evolve™ LED L-Series Wall Pack EWLS Product Dimensions: Flush Mount Conduit Box Mount 5 7.366 4.800 1.000 1.020 6.320 8.266 4.300 3.853 Gasket Gasket 1/2 “ Conduit Knock Out 3 Places Button PE Option 1.3751.750 Gasket Motion Sensor Option Button PE Option 4.300 4.800 1.750 1.6900.970 45° 1.750 1.3728.267 1.750 0.190 0.970 1.688 45° 0.190 TYP Wall PlateHousing Housing Wall Gasket Wall Gasket Housing Gasket Housing Gasket Mounting Box Knockout Plug 7.366 4.800 1.000 1.020 6.320 8.266 4.300 3.853 Gasket Gasket 1/2 “ Conduit Knock Out 3 Places Button PE Option 1.3751.750 Gasket Motion Sensor Option Button PE Option 4.300 4.800 1.750 1.6900.970 45° 1.75 0 1.3728.267 1.750 0.190 0.970 1.688 45° 0.190 TYP Wall PlateHousing Housing Wall Gasket Wall Gasket Housing Gasket Housing Gasket Mounting Box Knockout Plug 7.366 4.800 1.000 1.020 6.320 8.266 4.300 3.853 Gasket Gasket 1/2 “ Conduit Knock Out 3 Places Button PE Option 1.3751.750 Gasket Motion Sensor Option Button PE Option 4.300 4.800 1.750 1.6900.970 45° 1.75 0 1.3728.267 1.750 0.190 0.970 1.688 45° 0.190 TYP Wall PlateHousing Housing Wall Gasket Wall Gasket Housing Gasket Housing Gasket Mounting Box Knockout Plug 7.366 4.800 1.000 1.020 6.320 8.266 4.300 3.853 Gasket Gasket 1/2 “ Conduit Knock Out 3 Places Button PE Option 1.3751.750 Gasket Motion Sensor Option Button PE Option 4.300 4.800 1.750 1.6900.970 45° 1.750 1.3728.267 1.750 0.190 0.970 1.688 45° 0.190 TYP Wall PlateHousing Housing Wall Gasket Wall Gasket Housing Gasket Housing Gasket Mounting Box Knockout Plug Flush Mount Conduit Box Mount Sensing Pattern: LED.com © 2023 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 4 of 5 (Rev 06/27/23) OLP3127-Evolve EWLS Wall Pack Spec Sheet_R04 Arize EWLS L Series LED Wall Pack PROJECT NAME DATE TYPE CATALOG NUMBER CUSTOMER NAME • Mounts to standard 3-1/2” to 4” round and octagonal, 4” square, single gang and masonry junction boxes. • Flush Mount: Mounts directly to customer supplied junction box • Conduit Box Mount: Mounts to walls via separate mounting box with conduit knockouts. Mounting Accessories SAP NUMBER SKU DESCRIPTION DESCRIPTION FINISH 93098508 EWLSAE1BLCK 10" x 12" Beauty Plate BLACK 93098507 EWLSAE1DKBZ 10" x 12" Beauty Plate DARK BRONZE 93098509 EWLSAE2BLCK 12" x 16" Beauty Plate BLACK 93078134 EWLSAE2DKBZ 12" x 16" Beauty Plate DARK BRONZE 93098506 EWLSAE2GRAY 12" x 16" Beauty Plate GRAY 93082336 EWLSAE2WHTE 12" x 16" Beauty Plate WHITE 93117503 EWLSAE3BLCK 12" x 20" Beauty Plate BLACK 93082337 EWLSAE3WHTE 12" x 20" Beauty Plate WHITE 93060351 EWLSAD Diffuser Cover the unsightly debris marks on your building facade with color matched wall pack beauty plates. Mounting hole patterns and dimensions are compatible with typical building surface fastening methods. Accessories: Escutcheon Plates Small Beauty Plates 10 x 12 Medium Beauty Plates 12 x 16 Large Beauty Plates 12 x 20 LED.com © 2023 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 5 of 5 (Rev 06/27/23) OLP3127-Evolve EWLS Wall Pack Spec Sheet_R04