Loading...
HomeMy WebLinkAboutThe Edge - Light Fixtures SUBMITTAL DRAWINGS THE EDGE AT WEST CARMEL APARTMENTS 4/24/2024 TYPE MANUFACTURER DESCRIPTION S1 US ARCHITECTURAL LIGHTING DSAP25‐PLED‐PLED‐VSQ‐X‐80VLED‐700MA‐NW‐VOLTAGE‐1‐FINISH S1A US ARCHITECTURAL LIGHTING DSAP25‐PLED‐PLED‐III‐X‐80VLED‐700MA‐NW‐VOLTAGE‐1‐FINISH WP2 US ARCHITECTURAL LIGHTING DSAP20‐PLED‐PLED‐III‐X‐48LED‐350MA‐NW‐VOLTAGE‐WM‐FINISH WP4 US ARCHITECTURAL LIGHTING DSAP20‐PLED‐PLED‐IV‐X‐48LED‐350MA‐NW‐VOLTAGE‐WM‐FINISH CL2 VOLUME LIGHTING V9270‐33 The Edge At West Carmel Apartments 4/24/2024 FEATURES Luminaire Upper housing is heavy gauge cast aluminum (min. .125" wall; alloy >0.2% Cu for DSAP25) or spun aluminum with reveal (.125" min. wall for DSAP20). Lower housing is 0.080" thick spun aluminum with integrated LED module seat. Lower housing is vented at top and bottom for convective cooling of LED module. Top Driver chamber is barriered from LED Module chamber. Trulevel ball coupling mount is welded to housing and facilitates quick leveling and installation. Optics Emitters (LED’s) are arrayed on a metal core PCB panel with each emitter located on a copper thermal transfer pad and enclosed by an LED refractor. LED optics completely seal each individual emitter to meet an IP66 rating. In asymmetric distributions, a micro-reflector inside the refractor re-directs the house side emitter output towards the street side and functions as a house side shielding element. Refractors are injection molded H12 acrylic. Each LED refractor is sealed to the PCB over an emitter and all refractors are retained by an aluminum frame. Any one Panel, or group of Panels in a luminaire, have the same optical pattern. LED refractors produce standard site/area distributions. Panels are field replaceable and field rotatable in 90° increments. LED Emitters High output LED's are utilized with drive currents ranging from 350mA to 875mA. 70CRI Minimum. LED’s are available in standard Neutral White (4000K), or optional Cool White (5000K) or Warm White (3000K). Consult Factory for other LED options. LED Driver Constant current electronic with a power factor of >.90 and a minimum operating temperature of -40°F/-40°C. Driver(s) is/are UL and cUL recognized. In-line terminal blocks facilitate wiring between the driver and optical arrays. Drivers accept an input of 120-277V, 50/60Hz or 347V-480V, 50,60Hz. (0 - 10V dimmable driver is standard. Driver has a minimum of 3KV internal surge protection. Luminaire supplied with 20KV surge protector for field installation.) Amber LED’s PCA (Phosphor Converted Amber) LED’s utilize phosphors to create color output similar to LPS lamps and have a slight output in the blue spectral bandwidth. TRA (True Amber) LED’s utilize material that emits light in the amber spectral bandwidth only without the use of phosphors. Finish Polyester powder coat incorporates four step iron phosphate process to pretreat metal surface for maximum adhesion. Top coat is baked at 400°F for maximum hardness and exterior durability. DSAP25 Patent pending DSAP20 Patent pending 25" (635mm) 18.5" (470mm) 20" (508mm) 16.5" (419mm) TM (Formerly DSAP1) SOLID STATE AREA LIGHTING DSAP SERIES-PLED PROJECT NAME: FIXTURE TYPE: 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc.2021090 4/24/2024 SPECIFICATIONS DSAP25 E.P.A.= 1.23 Available in: 80 LED Module Max .50" dia. (13mm)(4) holes 5.5" (140mm) 5.5" (140mm) 7" sq. (178mm) Fixture DSAP25 18" (457mm) A B 18.5" (470mm) 25" (635mm) DSAP20 14" (356mm) C B C A Wall Plate Wall Mount ModulesMounting Styles DSAP20 E.P.A.= 0.77 Available in: 48 LED Module Max Extruded aluminum arm and cast aluminum wall bracket assembly provided with built in gasketed wire access for fixture/supply wire connection. 20" (508mm) 16.5" (368mm)a ORDERING INFORMATION WM Wallmount 1 XPK XPD XPS DSAP20-PLED (Formerly DSAP1) DSAP25-PLED Dark Bronze RAL-8019-T Green RAL-6005-T White RAL-9003-T Grey RAL-7004-T Black RAL-9005-T See USALTG.COM for additional arm styles Other LED Colors Available Consult Factory Distribution Type # of LEDs DSAP25 48LED 36LED 80LED1 DSAP20 48LED1 36LED 20LED Color Temp - CCT Drive Current NW (4000K)* *Standard CW (5000K) WW (3000K) 120 208 240 347 480 277 Luminaire Luminaire Optics LED Voltage Mounting Finish Options Optics LED Mode MountingVoltage Finish Options Spec/Order Example: DSAP20/PLED-II/48LED-350mA/NW/347/1/RAL-7005-S 48 LED Module 80 LED Module TM TM Type III Med. PLED-III-M Type III Wide PLED-III-W Type II PLED-II Type II Front Row PLED-II-FR Type IV PLED-IV-FT Type IV PLED-IV Type V Med. PLED-V-SQ-M Type V Wide PLED-V-SQ-W Type V Narrow PLED-VSQ-N StandardTextured Finish 1050mA2 875mA2 700mA2 525mA 350mA Amber3 Phosphor Converted Amber PCA4 True Amber5 TRA NOTES: 1 - 875mA maximum 2 - 700mA and 875mA not for use with TRA LED's 3 - Narrow band Ambers have no Definable CCT equivalent 4 - 700mA maximum 5 - Available in 350mA & 525mA drive currents only For smooth finish replace suffix “T” with suffix “S” (Example: RAL-9500-S) Consult factor for custom colors Photo Cell + Voltage (Example: PC120V) Double Fuse (208V, 240V) Single Fuse (120V, 277V) Internal House Side Shield inc. LED Count (Example: HS-PLED/48) Twist Lock Receptable Only High-Low Dimming for Switch by Others/Select Levels 50/100 or 25/100 (Example: HLSW/25) 7-Pin Twist Lock Receptable Only Blue-Tooth Programmable Photo/Motion Sensor (Factory - Motion 50/100; Photo 75fc) PC+V SF DF HS-PLED TPR HLSW TPR7 MS-F311 Stem Mount + Length(in) (48" Max) Chain Mount + Length(in) (48" Max) SM+L CM+L XPD 3" I.D. Arms are heavy wall extruded aluminum construction. For additional arm options see arm section. XPS 24" (610mm) 42" (1067mm) 42" (1067mm) 3" I.D. 24" (610mm) XPK 42" (1067mm) 3" I.D. 24" (610mm) DSAP SERIES - PLED 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc. 4/24/2024 LEDCount SourceType Source InitialLumens - 5000K CCT InitialLumens - 3000K CCT InitialLumens - 4000K CCT L70 greaterthan (HR)StartingTemp.System Watts Volts MaxInput Amps DSAP20 20 20 20 20 20 90,000+-40°F 22/28 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 .19/.24 .08/.11 .07/.08 90,000+-40°F 33/39 .28/.33 .12/.14 .10/.12 90,000+-40°F 44/50 .37/.42 .16/.18 .13/.15 90,000+-40°F 56/62 .47/.52 .21/.23 .17/.18 90,000+-40°F 67/73 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 .56/.61 .25/.27 .20/.21 90,000+-40°F 40/46 .34/.39 .15/.17 .12/.14 90,000+-40°F 60/66 .50/.55 .22/.24 .18/.20 90,000+-40°F 79/85 .66/.71 .29/.31 .23/.25 90,000+-40°F 101/107 .85/.90 .37/.39 .30/.31 90,000+-40°F 120/126 1.00/1.05 .44/.46 .35/.37 90,000+-40°F 53/59 .45/.50 .20/.22 .16/.17 90,000+-40°F 79/85 .66/.71 .29/.31 .23/.25 90,000+-40°F 106/112 .89/.94 .39/.41 .31/.33 90,000+-40°F 134/140 1.12/1.17 .49/.51 .39/.41 36 LED 90,000+-40°F 40/46 .34/.39 .15/.17 .12/.14 36 36 36 36 36 48 48 48 48 LED LED LED LED LED LED LED LED LED LED LED LED LED LED 20 PLED® Optical Module – 350mA 20 PLED® Optical Module – 525mA 20 PLED® Optical Module – 700mA 20 PLED® Optical Module – 875mA 20 PLED® Optical Module – 1050mA 36 PLED® Optical Module – 350mA 36 PLED® Optical Module – 525mA 36 PLED® Optical Module – 700mA 36 PLED® Optical Module – 875mA 48 PLED® Optical Module – 350mA 48 PLED® Optical Module – 525mA 48 PLED® Optical Module – 700mA 48 PLED® Optical Module – 875mA 36 PLED® Optical Module – 1050mA 36 PLED® Optical Module – 350mA 5126 – 5882 14659 – 16819 12199 – 13398 9699 – 11128 6821 – 7827 12755 – 14635 10994 – 12614 9149 – 10497 7274 – 8346 5116 – 5871 7086 – 8131 6108 – 7008 5083 – 5832 4042 – 4637 2842 – 3262 2700 – 3098 3839 – 4405 4829 - 5540 5802 – 6657 6732 – 7725 4860 – 5577 6910 – 7929 8691 – 9972 10444 – 11983 12117 – 13903 6480 – 7435 9214 – 10572 11589 – 13296 13926 – 15978 4870 – 5588 5383 – 6176 15392 – 17660 12808 – 14696 10183 – 11684 7162 – 8218 13392 – 15367 11544 – 13245 9606 – 11022 7638 – 8763 5371 – 6164 7441 – 8537 6413 – 7358 5337 – 6123 4243 – 4868 2984 – 3424 DSAP25 36 LED 90,000+-40°F 59/65 .50/.55 .23/.24 .17/.19 36 LED 90,000+-40°F 79/85 .66/.71 .29/.31 .23/.25 36 LED 90,000+-40°F 103/109 .86/.91 .38/.40 .30/.32 36 LED 90,000+-40°F 116/122 .97/1.02 .42/.44 .34/.36 48 LED 90,000+-40°F 53/59 .45/.50 .20/.23 .16/.17 48 PLED® Optical Module – 350mA 36 PLED® Optical Module – 525mA 36 PLED® Optical Module – 700mA 36 PLED® Optical Module – 875mA 36 PLED® Optical Module – 1050mA 7382 – 8470 7013 – 8047 7751 – 8894 9362 – 10742 8894 – 10205 9830 – 11279 10719 – 12298 10183 – 11682 11254 – 12913 12435 – 14268 11813 – 13554 13057 – 14981 6493 – 7450 6835 – 7843 7177 – 8235 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 DSAP SERIES - PLED LED/ Electrical Guide (pg. 1) 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc. 4/24/2024 LEDCount SourceType Source InitialLumens - 5000K CCT InitialLumens - 3000K CCT InitialLumens - 4000K CCT L70 greaterthan (HR)StartingTemp.System Watts Volts MaxInput Amps DSAP25 DSAP20 48 LED 90,000+-40°F 78/84 .65/.70 .29/.31 .23/.25 48 LED 90,000+-40°F 105/111 .88/.93 .38/.40 .31/.32 48 LED 90,000+-40°F 137/143 1.15/1.20 .50/.52 .40/.42 48 LED 90,000+-40°F 154/160 1.29/1.34 .56/.58 .45/.47 80 LED 90,000+-40°F 88/94 .74/.79 .32/.34 .26/.27 80 LED 90,000+-40°F 130/136 1.09/1.14 .47/.50 .38/.40 80 LED 90,000+-40°F 174/180 1.45/1.50 .63/.65 .50/.52 80 LED 90,000+-40°F 226/232 1.89/1.94 .82/.84 .66/.69 80 PLED® Optical Module – 350mA 80 PLED® Optical Module – 525mA 80 PLED® Optical Module – 700mA 80 PLED® Optical Module – 875mA 48 PLED® Optical Module – 525mA 48 PLED® Optical Module – 700mA 48 PLED® Optical Module – 875mA 48 PLED® Optical Module – 1050mA 9843 – 11294 9351 – 10729 10336 – 11859 12483 – 14323 11859 – 13607 13107 – 15038 14292 – 16397 13577 – 15577 15006 – 17217 16581 – 19024 15752 – 18073 17409 – 19975 11392 – 13071 10823 – 12418 11962 – 13724 16406 – 18823 15585 – 17882 17226 – 19765 20805 – 23871 19765 – 22678 21845 – 25065 23819 – 27329 22628 – 25962 25010 – 28695 20 51,000+-40°F 25 .21 .10 .08 20 51,000+-40°F 37 .31 .14 .11 20 51,000+-40°F 50 .42 .18 .15 PCA - LED PCA - LED PCA - LED 20 PLED® Optical Module – 350mA 20 PLED® Optical Module – 525mA 20 PLED® Optical Module – 700mA 2643 – 3033 2102 – 2411 1478 – 1696 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 Phosphor Converted Amber LED 36 51,000+-40°F 45 .38 .17 .13 36 51,000+ 51,000+ -40°F 67 .56 .25 .20 36 -40°F 89 .75 .33 .26 48 51,000+-40°F 59 .50 .22 .17 48 51,000+-40°F 89 .75 .33 .26 48 51,000+-40°F 118 .99 .43 .34 48 PLED® Optical Module – 350mA 48 PLED® Optical Module – 525mA 48 PLED® Optical Module – 700mA 36 PLED® Optical Module – 350mA 36 PLED® Optical Module – 525mA 36 PLED® Optical Module – 700mA 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED 6343 – 7278 5043 – 5787 3547 – 4070 4757 – 5459 3783 – 4340 2660 – 3053 120 277 347 36 -40°F36 PLED® Optical Module – 350mA DSAP25 51,000+45 .38 .17 .13 2666 – 3059 36 51,000+-40°F 66 .56 .24 .19 36 PLED® Optical Module – 525mA 120 277 347 3839 – 4405 DSAP SERIES - PLED LED/ Electrical Guide (pg. 2) 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc. 4/24/2024 LEDCount SourceType Source InitialLumens - 5000K CCT InitialLumens - 3000K CCT InitialLumens - 4000K CCT L70 greaterthan (HR)StartingTemp.System Watts Volts MaxInput Amps 36 51,000+-40°F 88 .74 .32 .26 51,000+-40°F 59 .50 .22 .17 48 48 51,000+-40°F 87 .73 .32 .25 48 51,000+-40°F 117 .98 .43 .34 80 51,000+-40°F 98 .82 .36 .29 80 51,000+-40°F 145 195 1.21 .52 .42 80 51,000+-40°F 1.63 .71 .57 66,500+-40°F 18 .15 .07 .06 48 PLED® Optical Module – 350mA 48 PLED® Optical Module – 525mA 48 PLED® Optical Module – 700mA 80 PLED® Optical Module – 350mA 80 PLED® Optical Module – 525mA 80 PLED® Optical Module – 700mA 36 PLED® Optical Module – 700mA 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED 854 – 979 20805 – 23871 16406 – 18823 11392 – 13071 6491 – 7448 5119 – 5873 3554 – 4078 4868 – 5586 DSAP20 20 TRA - LED 20 PLED® Optical Module – 350mA True Amber LED - 590nm 66,500+-40°F 26 .22 .10 .08 36 20 66,500+-40°F 31 .26 .12 .09 36 66,500+-40°F 47 .40 .17 .14 48 66,500+-40°F 41 .35 .15 .12 48 66,500+-40°F 62 .52 .23 .18 36 PLED® Optical Module – 350mA 36 PLED® Optical Module – 525mA 48 PLED® Optical Module – 350mA 48 PLED® Optical Module – 525mA 20 PLED® Optical Module – 525mA 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 TRA - LED TRA - LED TRA - LED TRA - LED TRA - LED 2451 – 2812 2048 – 2350 1838 – 2109 1536 – 1762 1022 – 1172 DSAP25 36 66,500+-40°F 31 .26 .12 .09 36 66,500+-40°F 46 .39 .18 .14 48 66,500+-40°F 41 .35 .19 .12 48 66,500+-40°F 61 .51 .22 .18 48 PLED® Optical Module – 350mA 48 PLED® Optical Module – 525mA 36 PLED® Optical Module – 350mA 36 PLED® Optical Module – 525mA 120 277 347 120 277 347 120 277 347 120 277 347 TRA - LED TRA - LED TRA - LED TRA - LED 2488 – 2854 2053 – 2355 1866 – 2140 1539 – 1766 DSAP25 Phosphor Converted Amber LED 80 66,500+-40°F 67 .56 .25 .20 80 PLED® Optical Module – 350mA 120 277 347 TRA - LED 3421 – 3925 DSAP SERIES - PLED LED/ Electrical Guide (pg. 3) 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc. 4/24/2024 1) Max Input Amps is the highest of starting, operating, or open circuit currents 2) System Watts includes the source watts and all driver components. 3) Lumen values for LED Modules vary according to the distribution type 4) For Wattage and Max Input Amps showing two values, use the higher value for luminaires with lit uplight windows (-L & -M) 5) PCA and TRA LED optics not recommended for use with lit uplight window models (-L & -M) 6) Fuse value should be sufficient to protect all wiring components. For electronic driver and LED component protection, use 20KV surge suppressors. 7) L70(10K) – TM-21 6x rule applied WARNING: All fixtures must be installed in accordance with local codes or the National Electrical Code. Failure to do so may result in serious personal injury. LEDCount SourceType Source InitialLumens - 5000K CCT InitialLumens - 3000K CCT InitialLumens - 4000K CCT L70 greaterthan (HR)StartingTemp.System Watts Volts MaxInput Amps DSAP25 True Amber LED - 590nm 80 66,500+-40°F 101 .85 .37 .30 80 PLED® Optical Module – 525mA 120 277 347 TRA - LED 4146 – 4757 DSAP SERIES - PLED LED/ Electrical Guide (pg. 4) 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc. NOTES: 4/24/2024 FEATURES Luminaire Upper housing is heavy gauge cast aluminum (min. .125" wall; alloy >0.2% Cu for DSAP25) or spun aluminum with reveal (.125" min. wall for DSAP20). Lower housing is 0.080" thick spun aluminum with integrated LED module seat. Lower housing is vented at top and bottom for convective cooling of LED module. Top Driver chamber is barriered from LED Module chamber. Trulevel ball coupling mount is welded to housing and facilitates quick leveling and installation. Optics Emitters (LED’s) are arrayed on a metal core PCB panel with each emitter located on a copper thermal transfer pad and enclosed by an LED refractor. LED optics completely seal each individual emitter to meet an IP66 rating. In asymmetric distributions, a micro-reflector inside the refractor re-directs the house side emitter output towards the street side and functions as a house side shielding element. Refractors are injection molded H12 acrylic. Each LED refractor is sealed to the PCB over an emitter and all refractors are retained by an aluminum frame. Any one Panel, or group of Panels in a luminaire, have the same optical pattern. LED refractors produce standard site/area distributions. Panels are field replaceable and field rotatable in 90° increments. LED Emitters High output LED's are utilized with drive currents ranging from 350mA to 875mA. 70CRI Minimum. LED’s are available in standard Neutral White (4000K), or optional Cool White (5000K) or Warm White (3000K). Consult Factory for other LED options. LED Driver Constant current electronic with a power factor of >.90 and a minimum operating temperature of -40°F/-40°C. Driver(s) is/are UL and cUL recognized. In-line terminal blocks facilitate wiring between the driver and optical arrays. Drivers accept an input of 120-277V, 50/60Hz or 347V-480V, 50,60Hz. (0 - 10V dimmable driver is standard. Driver has a minimum of 3KV internal surge protection. Luminaire supplied with 20KV surge protector for field installation.) Amber LED’s PCA (Phosphor Converted Amber) LED’s utilize phosphors to create color output similar to LPS lamps and have a slight output in the blue spectral bandwidth. TRA (True Amber) LED’s utilize material that emits light in the amber spectral bandwidth only without the use of phosphors. Finish Polyester powder coat incorporates four step iron phosphate process to pretreat metal surface for maximum adhesion. Top coat is baked at 400°F for maximum hardness and exterior durability. DSAP25 Patent pending DSAP20 Patent pending 25" (635mm) 18.5" (470mm) 20" (508mm) 16.5" (419mm) TM (Formerly DSAP1) SOLID STATE AREA LIGHTING DSAP SERIES-PLED PROJECT NAME: FIXTURE TYPE: 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc.2021090 4/24/2024 SPECIFICATIONS DSAP25 E.P.A.= 1.23 Available in: 80 LED Module Max .50" dia. (13mm)(4) holes 5.5" (140mm) 5.5" (140mm) 7" sq. (178mm) Fixture DSAP25 18" (457mm) A B 18.5" (470mm) 25" (635mm) DSAP20 14" (356mm) C B C A Wall Plate Wall Mount ModulesMounting Styles DSAP20 E.P.A.= 0.77 Available in: 48 LED Module Max Extruded aluminum arm and cast aluminum wall bracket assembly provided with built in gasketed wire access for fixture/supply wire connection. 20" (508mm) 16.5" (368mm)a ORDERING INFORMATION WM Wallmount 1 XPK XPD XPS DSAP20-PLED (Formerly DSAP1) DSAP25-PLED Dark Bronze RAL-8019-T Green RAL-6005-T White RAL-9003-T Grey RAL-7004-T Black RAL-9005-T See USALTG.COM for additional arm styles Other LED Colors Available Consult Factory Distribution Type # of LEDs DSAP25 48LED 36LED 80LED1 DSAP20 48LED1 36LED 20LED Color Temp - CCT Drive Current NW (4000K)* *Standard CW (5000K) WW (3000K) 120 208 240 347 480 277 Luminaire Luminaire Optics LED Voltage Mounting Finish Options Optics LED Mode MountingVoltage Finish Options Spec/Order Example: DSAP20/PLED-II/48LED-350mA/NW/347/1/RAL-7005-S 48 LED Module 80 LED Module TM TM Type III Med. PLED-III-M Type III Wide PLED-III-W Type II PLED-II Type II Front Row PLED-II-FR Type IV PLED-IV-FT Type IV PLED-IV Type V Med. PLED-V-SQ-M Type V Wide PLED-V-SQ-W Type V Narrow PLED-VSQ-N StandardTextured Finish 1050mA2 875mA2 700mA2 525mA 350mA Amber3 Phosphor Converted Amber PCA4 True Amber5 TRA NOTES: 1 - 875mA maximum 2 - 700mA and 875mA not for use with TRA LED's 3 - Narrow band Ambers have no Definable CCT equivalent 4 - 700mA maximum 5 - Available in 350mA & 525mA drive currents only For smooth finish replace suffix “T” with suffix “S” (Example: RAL-9500-S) Consult factor for custom colors Photo Cell + Voltage (Example: PC120V) Double Fuse (208V, 240V) Single Fuse (120V, 277V) Internal House Side Shield inc. LED Count (Example: HS-PLED/48) Twist Lock Receptable Only High-Low Dimming for Switch by Others/Select Levels 50/100 or 25/100 (Example: HLSW/25) 7-Pin Twist Lock Receptable Only Blue-Tooth Programmable Photo/Motion Sensor (Factory - Motion 50/100; Photo 75fc) PC+V SF DF HS-PLED TPR HLSW TPR7 MS-F311 Stem Mount + Length(in) (48" Max) Chain Mount + Length(in) (48" Max) SM+L CM+L XPD 3" I.D. Arms are heavy wall extruded aluminum construction. For additional arm options see arm section. XPS 24" (610mm) 42" (1067mm) 42" (1067mm) 3" I.D. 24" (610mm) XPK 42" (1067mm) 3" I.D. 24" (610mm) DSAP SERIES - PLED 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc. 4/24/2024 LEDCount SourceType Source InitialLumens - 5000K CCT InitialLumens - 3000K CCT InitialLumens - 4000K CCT L70 greaterthan (HR)StartingTemp.System Watts Volts MaxInput Amps DSAP20 20 20 20 20 20 90,000+-40°F 22/28 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 .19/.24 .08/.11 .07/.08 90,000+-40°F 33/39 .28/.33 .12/.14 .10/.12 90,000+-40°F 44/50 .37/.42 .16/.18 .13/.15 90,000+-40°F 56/62 .47/.52 .21/.23 .17/.18 90,000+-40°F 67/73 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 .56/.61 .25/.27 .20/.21 90,000+-40°F 40/46 .34/.39 .15/.17 .12/.14 90,000+-40°F 60/66 .50/.55 .22/.24 .18/.20 90,000+-40°F 79/85 .66/.71 .29/.31 .23/.25 90,000+-40°F 101/107 .85/.90 .37/.39 .30/.31 90,000+-40°F 120/126 1.00/1.05 .44/.46 .35/.37 90,000+-40°F 53/59 .45/.50 .20/.22 .16/.17 90,000+-40°F 79/85 .66/.71 .29/.31 .23/.25 90,000+-40°F 106/112 .89/.94 .39/.41 .31/.33 90,000+-40°F 134/140 1.12/1.17 .49/.51 .39/.41 36 LED 90,000+-40°F 40/46 .34/.39 .15/.17 .12/.14 36 36 36 36 36 48 48 48 48 LED LED LED LED LED LED LED LED LED LED LED LED LED LED 20 PLED® Optical Module – 350mA 20 PLED® Optical Module – 525mA 20 PLED® Optical Module – 700mA 20 PLED® Optical Module – 875mA 20 PLED® Optical Module – 1050mA 36 PLED® Optical Module – 350mA 36 PLED® Optical Module – 525mA 36 PLED® Optical Module – 700mA 36 PLED® Optical Module – 875mA 48 PLED® Optical Module – 350mA 48 PLED® Optical Module – 525mA 48 PLED® Optical Module – 700mA 48 PLED® Optical Module – 875mA 36 PLED® Optical Module – 1050mA 36 PLED® Optical Module – 350mA 5126 – 5882 14659 – 16819 12199 – 13398 9699 – 11128 6821 – 7827 12755 – 14635 10994 – 12614 9149 – 10497 7274 – 8346 5116 – 5871 7086 – 8131 6108 – 7008 5083 – 5832 4042 – 4637 2842 – 3262 2700 – 3098 3839 – 4405 4829 - 5540 5802 – 6657 6732 – 7725 4860 – 5577 6910 – 7929 8691 – 9972 10444 – 11983 12117 – 13903 6480 – 7435 9214 – 10572 11589 – 13296 13926 – 15978 4870 – 5588 5383 – 6176 15392 – 17660 12808 – 14696 10183 – 11684 7162 – 8218 13392 – 15367 11544 – 13245 9606 – 11022 7638 – 8763 5371 – 6164 7441 – 8537 6413 – 7358 5337 – 6123 4243 – 4868 2984 – 3424 DSAP25 36 LED 90,000+-40°F 59/65 .50/.55 .23/.24 .17/.19 36 LED 90,000+-40°F 79/85 .66/.71 .29/.31 .23/.25 36 LED 90,000+-40°F 103/109 .86/.91 .38/.40 .30/.32 36 LED 90,000+-40°F 116/122 .97/1.02 .42/.44 .34/.36 48 LED 90,000+-40°F 53/59 .45/.50 .20/.23 .16/.17 48 PLED® Optical Module – 350mA 36 PLED® Optical Module – 525mA 36 PLED® Optical Module – 700mA 36 PLED® Optical Module – 875mA 36 PLED® Optical Module – 1050mA 7382 – 8470 7013 – 8047 7751 – 8894 9362 – 10742 8894 – 10205 9830 – 11279 10719 – 12298 10183 – 11682 11254 – 12913 12435 – 14268 11813 – 13554 13057 – 14981 6493 – 7450 6835 – 7843 7177 – 8235 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 DSAP SERIES - PLED LED/ Electrical Guide (pg. 1) 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc. 4/24/2024 LEDCount SourceType Source InitialLumens - 5000K CCT InitialLumens - 3000K CCT InitialLumens - 4000K CCT L70 greaterthan (HR)StartingTemp.System Watts Volts MaxInput Amps DSAP25 DSAP20 48 LED 90,000+-40°F 78/84 .65/.70 .29/.31 .23/.25 48 LED 90,000+-40°F 105/111 .88/.93 .38/.40 .31/.32 48 LED 90,000+-40°F 137/143 1.15/1.20 .50/.52 .40/.42 48 LED 90,000+-40°F 154/160 1.29/1.34 .56/.58 .45/.47 80 LED 90,000+-40°F 88/94 .74/.79 .32/.34 .26/.27 80 LED 90,000+-40°F 130/136 1.09/1.14 .47/.50 .38/.40 80 LED 90,000+-40°F 174/180 1.45/1.50 .63/.65 .50/.52 80 LED 90,000+-40°F 226/232 1.89/1.94 .82/.84 .66/.69 80 PLED® Optical Module – 350mA 80 PLED® Optical Module – 525mA 80 PLED® Optical Module – 700mA 80 PLED® Optical Module – 875mA 48 PLED® Optical Module – 525mA 48 PLED® Optical Module – 700mA 48 PLED® Optical Module – 875mA 48 PLED® Optical Module – 1050mA 9843 – 11294 9351 – 10729 10336 – 11859 12483 – 14323 11859 – 13607 13107 – 15038 14292 – 16397 13577 – 15577 15006 – 17217 16581 – 19024 15752 – 18073 17409 – 19975 11392 – 13071 10823 – 12418 11962 – 13724 16406 – 18823 15585 – 17882 17226 – 19765 20805 – 23871 19765 – 22678 21845 – 25065 23819 – 27329 22628 – 25962 25010 – 28695 20 51,000+-40°F 25 .21 .10 .08 20 51,000+-40°F 37 .31 .14 .11 20 51,000+-40°F 50 .42 .18 .15 PCA - LED PCA - LED PCA - LED 20 PLED® Optical Module – 350mA 20 PLED® Optical Module – 525mA 20 PLED® Optical Module – 700mA 2643 – 3033 2102 – 2411 1478 – 1696 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 Phosphor Converted Amber LED 36 51,000+-40°F 45 .38 .17 .13 36 51,000+ 51,000+ -40°F 67 .56 .25 .20 36 -40°F 89 .75 .33 .26 48 51,000+-40°F 59 .50 .22 .17 48 51,000+-40°F 89 .75 .33 .26 48 51,000+-40°F 118 .99 .43 .34 48 PLED® Optical Module – 350mA 48 PLED® Optical Module – 525mA 48 PLED® Optical Module – 700mA 36 PLED® Optical Module – 350mA 36 PLED® Optical Module – 525mA 36 PLED® Optical Module – 700mA 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED 6343 – 7278 5043 – 5787 3547 – 4070 4757 – 5459 3783 – 4340 2660 – 3053 120 277 347 36 -40°F36 PLED® Optical Module – 350mA DSAP25 51,000+45 .38 .17 .13 2666 – 3059 36 51,000+-40°F 66 .56 .24 .19 36 PLED® Optical Module – 525mA 120 277 347 3839 – 4405 DSAP SERIES - PLED LED/ Electrical Guide (pg. 2) 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc. 4/24/2024 LEDCount SourceType Source InitialLumens - 5000K CCT InitialLumens - 3000K CCT InitialLumens - 4000K CCT L70 greaterthan (HR)StartingTemp.System Watts Volts MaxInput Amps 36 51,000+-40°F 88 .74 .32 .26 51,000+-40°F 59 .50 .22 .17 48 48 51,000+-40°F 87 .73 .32 .25 48 51,000+-40°F 117 .98 .43 .34 80 51,000+-40°F 98 .82 .36 .29 80 51,000+-40°F 145 195 1.21 .52 .42 80 51,000+-40°F 1.63 .71 .57 66,500+-40°F 18 .15 .07 .06 48 PLED® Optical Module – 350mA 48 PLED® Optical Module – 525mA 48 PLED® Optical Module – 700mA 80 PLED® Optical Module – 350mA 80 PLED® Optical Module – 525mA 80 PLED® Optical Module – 700mA 36 PLED® Optical Module – 700mA 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED 854 – 979 20805 – 23871 16406 – 18823 11392 – 13071 6491 – 7448 5119 – 5873 3554 – 4078 4868 – 5586 DSAP20 20 TRA - LED 20 PLED® Optical Module – 350mA True Amber LED - 590nm 66,500+-40°F 26 .22 .10 .08 36 20 66,500+-40°F 31 .26 .12 .09 36 66,500+-40°F 47 .40 .17 .14 48 66,500+-40°F 41 .35 .15 .12 48 66,500+-40°F 62 .52 .23 .18 36 PLED® Optical Module – 350mA 36 PLED® Optical Module – 525mA 48 PLED® Optical Module – 350mA 48 PLED® Optical Module – 525mA 20 PLED® Optical Module – 525mA 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 TRA - LED TRA - LED TRA - LED TRA - LED TRA - LED 2451 – 2812 2048 – 2350 1838 – 2109 1536 – 1762 1022 – 1172 DSAP25 36 66,500+-40°F 31 .26 .12 .09 36 66,500+-40°F 46 .39 .18 .14 48 66,500+-40°F 41 .35 .19 .12 48 66,500+-40°F 61 .51 .22 .18 48 PLED® Optical Module – 350mA 48 PLED® Optical Module – 525mA 36 PLED® Optical Module – 350mA 36 PLED® Optical Module – 525mA 120 277 347 120 277 347 120 277 347 120 277 347 TRA - LED TRA - LED TRA - LED TRA - LED 2488 – 2854 2053 – 2355 1866 – 2140 1539 – 1766 DSAP25 Phosphor Converted Amber LED 80 66,500+-40°F 67 .56 .25 .20 80 PLED® Optical Module – 350mA 120 277 347 TRA - LED 3421 – 3925 DSAP SERIES - PLED LED/ Electrical Guide (pg. 3) 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc. 4/24/2024 1) Max Input Amps is the highest of starting, operating, or open circuit currents 2) System Watts includes the source watts and all driver components. 3) Lumen values for LED Modules vary according to the distribution type 4) For Wattage and Max Input Amps showing two values, use the higher value for luminaires with lit uplight windows (-L & -M) 5) PCA and TRA LED optics not recommended for use with lit uplight window models (-L & -M) 6) Fuse value should be sufficient to protect all wiring components. For electronic driver and LED component protection, use 20KV surge suppressors. 7) L70(10K) – TM-21 6x rule applied WARNING: All fixtures must be installed in accordance with local codes or the National Electrical Code. Failure to do so may result in serious personal injury. LEDCount SourceType Source InitialLumens - 5000K CCT InitialLumens - 3000K CCT InitialLumens - 4000K CCT L70 greaterthan (HR)StartingTemp.System Watts Volts MaxInput Amps DSAP25 True Amber LED - 590nm 80 66,500+-40°F 101 .85 .37 .30 80 PLED® Optical Module – 525mA 120 277 347 TRA - LED 4146 – 4757 DSAP SERIES - PLED LED/ Electrical Guide (pg. 4) 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc. NOTES: 4/24/2024 FEATURES Luminaire Upper housing is heavy gauge cast aluminum (min. .125" wall; alloy >0.2% Cu for DSAP25) or spun aluminum with reveal (.125" min. wall for DSAP20). Lower housing is 0.080" thick spun aluminum with integrated LED module seat. Lower housing is vented at top and bottom for convective cooling of LED module. Top Driver chamber is barriered from LED Module chamber. Trulevel ball coupling mount is welded to housing and facilitates quick leveling and installation. Optics Emitters (LED’s) are arrayed on a metal core PCB panel with each emitter located on a copper thermal transfer pad and enclosed by an LED refractor. LED optics completely seal each individual emitter to meet an IP66 rating. In asymmetric distributions, a micro-reflector inside the refractor re-directs the house side emitter output towards the street side and functions as a house side shielding element. Refractors are injection molded H12 acrylic. Each LED refractor is sealed to the PCB over an emitter and all refractors are retained by an aluminum frame. Any one Panel, or group of Panels in a luminaire, have the same optical pattern. LED refractors produce standard site/area distributions. Panels are field replaceable and field rotatable in 90° increments. LED Emitters High output LED's are utilized with drive currents ranging from 350mA to 875mA. 70CRI Minimum. LED’s are available in standard Neutral White (4000K), or optional Cool White (5000K) or Warm White (3000K). Consult Factory for other LED options. LED Driver Constant current electronic with a power factor of >.90 and a minimum operating temperature of -40°F/-40°C. Driver(s) is/are UL and cUL recognized. In-line terminal blocks facilitate wiring between the driver and optical arrays. Drivers accept an input of 120-277V, 50/60Hz or 347V-480V, 50,60Hz. (0 - 10V dimmable driver is standard. Driver has a minimum of 3KV internal surge protection. Luminaire supplied with 20KV surge protector for field installation.) Amber LED’s PCA (Phosphor Converted Amber) LED’s utilize phosphors to create color output similar to LPS lamps and have a slight output in the blue spectral bandwidth. TRA (True Amber) LED’s utilize material that emits light in the amber spectral bandwidth only without the use of phosphors. Finish Polyester powder coat incorporates four step iron phosphate process to pretreat metal surface for maximum adhesion. Top coat is baked at 400°F for maximum hardness and exterior durability. DSAP25 Patent pending DSAP20 Patent pending 25" (635mm) 18.5" (470mm) 20" (508mm) 16.5" (419mm) TM (Formerly DSAP1) SOLID STATE AREA LIGHTING DSAP SERIES-PLED PROJECT NAME: FIXTURE TYPE: 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc.2021090 4/24/2024 SPECIFICATIONS DSAP25 E.P.A.= 1.23 Available in: 80 LED Module Max .50" dia. (13mm)(4) holes 5.5" (140mm) 5.5" (140mm) 7" sq. (178mm) Fixture DSAP25 18" (457mm) A B 18.5" (470mm) 25" (635mm) DSAP20 14" (356mm) C B C A Wall Plate Wall Mount ModulesMounting Styles DSAP20 E.P.A.= 0.77 Available in: 48 LED Module Max Extruded aluminum arm and cast aluminum wall bracket assembly provided with built in gasketed wire access for fixture/supply wire connection. 20" (508mm) 16.5" (368mm)a ORDERING INFORMATION WM Wallmount 1 XPK XPD XPS DSAP20-PLED (Formerly DSAP1) DSAP25-PLED Dark Bronze RAL-8019-T Green RAL-6005-T White RAL-9003-T Grey RAL-7004-T Black RAL-9005-T See USALTG.COM for additional arm styles Other LED Colors Available Consult Factory Distribution Type # of LEDs DSAP25 48LED 36LED 80LED1 DSAP20 48LED1 36LED 20LED Color Temp - CCT Drive Current NW (4000K)* *Standard CW (5000K) WW (3000K) 120 208 240 347 480 277 Luminaire Luminaire Optics LED Voltage Mounting Finish Options Optics LED Mode MountingVoltage Finish Options Spec/Order Example: DSAP20/PLED-II/48LED-350mA/NW/347/1/RAL-7005-S 48 LED Module 80 LED Module TM TM Type III Med. PLED-III-M Type III Wide PLED-III-W Type II PLED-II Type II Front Row PLED-II-FR Type IV PLED-IV-FT Type IV PLED-IV Type V Med. PLED-V-SQ-M Type V Wide PLED-V-SQ-W Type V Narrow PLED-VSQ-N StandardTextured Finish 1050mA2 875mA2 700mA2 525mA 350mA Amber3 Phosphor Converted Amber PCA4 True Amber5 TRA NOTES: 1 - 875mA maximum 2 - 700mA and 875mA not for use with TRA LED's 3 - Narrow band Ambers have no Definable CCT equivalent 4 - 700mA maximum 5 - Available in 350mA & 525mA drive currents only For smooth finish replace suffix “T” with suffix “S” (Example: RAL-9500-S) Consult factor for custom colors Photo Cell + Voltage (Example: PC120V) Double Fuse (208V, 240V) Single Fuse (120V, 277V) Internal House Side Shield inc. LED Count (Example: HS-PLED/48) Twist Lock Receptable Only High-Low Dimming for Switch by Others/Select Levels 50/100 or 25/100 (Example: HLSW/25) 7-Pin Twist Lock Receptable Only Blue-Tooth Programmable Photo/Motion Sensor (Factory - Motion 50/100; Photo 75fc) PC+V SF DF HS-PLED TPR HLSW TPR7 MS-F311 Stem Mount + Length(in) (48" Max) Chain Mount + Length(in) (48" Max) SM+L CM+L XPD 3" I.D. Arms are heavy wall extruded aluminum construction. For additional arm options see arm section. XPS 24" (610mm) 42" (1067mm) 42" (1067mm) 3" I.D. 24" (610mm) XPK 42" (1067mm) 3" I.D. 24" (610mm) DSAP SERIES - PLED 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc. 4/24/2024 LEDCount SourceType Source InitialLumens - 5000K CCT InitialLumens - 3000K CCT InitialLumens - 4000K CCT L70 greaterthan (HR)StartingTemp.System Watts Volts MaxInput Amps DSAP20 20 20 20 20 20 90,000+-40°F 22/28 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 .19/.24 .08/.11 .07/.08 90,000+-40°F 33/39 .28/.33 .12/.14 .10/.12 90,000+-40°F 44/50 .37/.42 .16/.18 .13/.15 90,000+-40°F 56/62 .47/.52 .21/.23 .17/.18 90,000+-40°F 67/73 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 .56/.61 .25/.27 .20/.21 90,000+-40°F 40/46 .34/.39 .15/.17 .12/.14 90,000+-40°F 60/66 .50/.55 .22/.24 .18/.20 90,000+-40°F 79/85 .66/.71 .29/.31 .23/.25 90,000+-40°F 101/107 .85/.90 .37/.39 .30/.31 90,000+-40°F 120/126 1.00/1.05 .44/.46 .35/.37 90,000+-40°F 53/59 .45/.50 .20/.22 .16/.17 90,000+-40°F 79/85 .66/.71 .29/.31 .23/.25 90,000+-40°F 106/112 .89/.94 .39/.41 .31/.33 90,000+-40°F 134/140 1.12/1.17 .49/.51 .39/.41 36 LED 90,000+-40°F 40/46 .34/.39 .15/.17 .12/.14 36 36 36 36 36 48 48 48 48 LED LED LED LED LED LED LED LED LED LED LED LED LED LED 20 PLED® Optical Module – 350mA 20 PLED® Optical Module – 525mA 20 PLED® Optical Module – 700mA 20 PLED® Optical Module – 875mA 20 PLED® Optical Module – 1050mA 36 PLED® Optical Module – 350mA 36 PLED® Optical Module – 525mA 36 PLED® Optical Module – 700mA 36 PLED® Optical Module – 875mA 48 PLED® Optical Module – 350mA 48 PLED® Optical Module – 525mA 48 PLED® Optical Module – 700mA 48 PLED® Optical Module – 875mA 36 PLED® Optical Module – 1050mA 36 PLED® Optical Module – 350mA 5126 – 5882 14659 – 16819 12199 – 13398 9699 – 11128 6821 – 7827 12755 – 14635 10994 – 12614 9149 – 10497 7274 – 8346 5116 – 5871 7086 – 8131 6108 – 7008 5083 – 5832 4042 – 4637 2842 – 3262 2700 – 3098 3839 – 4405 4829 - 5540 5802 – 6657 6732 – 7725 4860 – 5577 6910 – 7929 8691 – 9972 10444 – 11983 12117 – 13903 6480 – 7435 9214 – 10572 11589 – 13296 13926 – 15978 4870 – 5588 5383 – 6176 15392 – 17660 12808 – 14696 10183 – 11684 7162 – 8218 13392 – 15367 11544 – 13245 9606 – 11022 7638 – 8763 5371 – 6164 7441 – 8537 6413 – 7358 5337 – 6123 4243 – 4868 2984 – 3424 DSAP25 36 LED 90,000+-40°F 59/65 .50/.55 .23/.24 .17/.19 36 LED 90,000+-40°F 79/85 .66/.71 .29/.31 .23/.25 36 LED 90,000+-40°F 103/109 .86/.91 .38/.40 .30/.32 36 LED 90,000+-40°F 116/122 .97/1.02 .42/.44 .34/.36 48 LED 90,000+-40°F 53/59 .45/.50 .20/.23 .16/.17 48 PLED® Optical Module – 350mA 36 PLED® Optical Module – 525mA 36 PLED® Optical Module – 700mA 36 PLED® Optical Module – 875mA 36 PLED® Optical Module – 1050mA 7382 – 8470 7013 – 8047 7751 – 8894 9362 – 10742 8894 – 10205 9830 – 11279 10719 – 12298 10183 – 11682 11254 – 12913 12435 – 14268 11813 – 13554 13057 – 14981 6493 – 7450 6835 – 7843 7177 – 8235 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 DSAP SERIES - PLED LED/ Electrical Guide (pg. 1) 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc. 4/24/2024 LEDCount SourceType Source InitialLumens - 5000K CCT InitialLumens - 3000K CCT InitialLumens - 4000K CCT L70 greaterthan (HR)StartingTemp.System Watts Volts MaxInput Amps DSAP25 DSAP20 48 LED 90,000+-40°F 78/84 .65/.70 .29/.31 .23/.25 48 LED 90,000+-40°F 105/111 .88/.93 .38/.40 .31/.32 48 LED 90,000+-40°F 137/143 1.15/1.20 .50/.52 .40/.42 48 LED 90,000+-40°F 154/160 1.29/1.34 .56/.58 .45/.47 80 LED 90,000+-40°F 88/94 .74/.79 .32/.34 .26/.27 80 LED 90,000+-40°F 130/136 1.09/1.14 .47/.50 .38/.40 80 LED 90,000+-40°F 174/180 1.45/1.50 .63/.65 .50/.52 80 LED 90,000+-40°F 226/232 1.89/1.94 .82/.84 .66/.69 80 PLED® Optical Module – 350mA 80 PLED® Optical Module – 525mA 80 PLED® Optical Module – 700mA 80 PLED® Optical Module – 875mA 48 PLED® Optical Module – 525mA 48 PLED® Optical Module – 700mA 48 PLED® Optical Module – 875mA 48 PLED® Optical Module – 1050mA 9843 – 11294 9351 – 10729 10336 – 11859 12483 – 14323 11859 – 13607 13107 – 15038 14292 – 16397 13577 – 15577 15006 – 17217 16581 – 19024 15752 – 18073 17409 – 19975 11392 – 13071 10823 – 12418 11962 – 13724 16406 – 18823 15585 – 17882 17226 – 19765 20805 – 23871 19765 – 22678 21845 – 25065 23819 – 27329 22628 – 25962 25010 – 28695 20 51,000+-40°F 25 .21 .10 .08 20 51,000+-40°F 37 .31 .14 .11 20 51,000+-40°F 50 .42 .18 .15 PCA - LED PCA - LED PCA - LED 20 PLED® Optical Module – 350mA 20 PLED® Optical Module – 525mA 20 PLED® Optical Module – 700mA 2643 – 3033 2102 – 2411 1478 – 1696 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 Phosphor Converted Amber LED 36 51,000+-40°F 45 .38 .17 .13 36 51,000+ 51,000+ -40°F 67 .56 .25 .20 36 -40°F 89 .75 .33 .26 48 51,000+-40°F 59 .50 .22 .17 48 51,000+-40°F 89 .75 .33 .26 48 51,000+-40°F 118 .99 .43 .34 48 PLED® Optical Module – 350mA 48 PLED® Optical Module – 525mA 48 PLED® Optical Module – 700mA 36 PLED® Optical Module – 350mA 36 PLED® Optical Module – 525mA 36 PLED® Optical Module – 700mA 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED 6343 – 7278 5043 – 5787 3547 – 4070 4757 – 5459 3783 – 4340 2660 – 3053 120 277 347 36 -40°F36 PLED® Optical Module – 350mA DSAP25 51,000+45 .38 .17 .13 2666 – 3059 36 51,000+-40°F 66 .56 .24 .19 36 PLED® Optical Module – 525mA 120 277 347 3839 – 4405 DSAP SERIES - PLED LED/ Electrical Guide (pg. 2) 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc. 4/24/2024 LEDCount SourceType Source InitialLumens - 5000K CCT InitialLumens - 3000K CCT InitialLumens - 4000K CCT L70 greaterthan (HR)StartingTemp.System Watts Volts MaxInput Amps 36 51,000+-40°F 88 .74 .32 .26 51,000+-40°F 59 .50 .22 .17 48 48 51,000+-40°F 87 .73 .32 .25 48 51,000+-40°F 117 .98 .43 .34 80 51,000+-40°F 98 .82 .36 .29 80 51,000+-40°F 145 195 1.21 .52 .42 80 51,000+-40°F 1.63 .71 .57 66,500+-40°F 18 .15 .07 .06 48 PLED® Optical Module – 350mA 48 PLED® Optical Module – 525mA 48 PLED® Optical Module – 700mA 80 PLED® Optical Module – 350mA 80 PLED® Optical Module – 525mA 80 PLED® Optical Module – 700mA 36 PLED® Optical Module – 700mA 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED 854 – 979 20805 – 23871 16406 – 18823 11392 – 13071 6491 – 7448 5119 – 5873 3554 – 4078 4868 – 5586 DSAP20 20 TRA - LED 20 PLED® Optical Module – 350mA True Amber LED - 590nm 66,500+-40°F 26 .22 .10 .08 36 20 66,500+-40°F 31 .26 .12 .09 36 66,500+-40°F 47 .40 .17 .14 48 66,500+-40°F 41 .35 .15 .12 48 66,500+-40°F 62 .52 .23 .18 36 PLED® Optical Module – 350mA 36 PLED® Optical Module – 525mA 48 PLED® Optical Module – 350mA 48 PLED® Optical Module – 525mA 20 PLED® Optical Module – 525mA 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 TRA - LED TRA - LED TRA - LED TRA - LED TRA - LED 2451 – 2812 2048 – 2350 1838 – 2109 1536 – 1762 1022 – 1172 DSAP25 36 66,500+-40°F 31 .26 .12 .09 36 66,500+-40°F 46 .39 .18 .14 48 66,500+-40°F 41 .35 .19 .12 48 66,500+-40°F 61 .51 .22 .18 48 PLED® Optical Module – 350mA 48 PLED® Optical Module – 525mA 36 PLED® Optical Module – 350mA 36 PLED® Optical Module – 525mA 120 277 347 120 277 347 120 277 347 120 277 347 TRA - LED TRA - LED TRA - LED TRA - LED 2488 – 2854 2053 – 2355 1866 – 2140 1539 – 1766 DSAP25 Phosphor Converted Amber LED 80 66,500+-40°F 67 .56 .25 .20 80 PLED® Optical Module – 350mA 120 277 347 TRA - LED 3421 – 3925 DSAP SERIES - PLED LED/ Electrical Guide (pg. 3) 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc. 4/24/2024 1) Max Input Amps is the highest of starting, operating, or open circuit currents 2) System Watts includes the source watts and all driver components. 3) Lumen values for LED Modules vary according to the distribution type 4) For Wattage and Max Input Amps showing two values, use the higher value for luminaires with lit uplight windows (-L & -M) 5) PCA and TRA LED optics not recommended for use with lit uplight window models (-L & -M) 6) Fuse value should be sufficient to protect all wiring components. For electronic driver and LED component protection, use 20KV surge suppressors. 7) L70(10K) – TM-21 6x rule applied WARNING: All fixtures must be installed in accordance with local codes or the National Electrical Code. Failure to do so may result in serious personal injury. LEDCount SourceType Source InitialLumens - 5000K CCT InitialLumens - 3000K CCT InitialLumens - 4000K CCT L70 greaterthan (HR)StartingTemp.System Watts Volts MaxInput Amps DSAP25 True Amber LED - 590nm 80 66,500+-40°F 101 .85 .37 .30 80 PLED® Optical Module – 525mA 120 277 347 TRA - LED 4146 – 4757 DSAP SERIES - PLED LED/ Electrical Guide (pg. 4) 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc. NOTES: 4/24/2024 FEATURES Luminaire Upper housing is heavy gauge cast aluminum (min. .125" wall; alloy >0.2% Cu for DSAP25) or spun aluminum with reveal (.125" min. wall for DSAP20). Lower housing is 0.080" thick spun aluminum with integrated LED module seat. Lower housing is vented at top and bottom for convective cooling of LED module. Top Driver chamber is barriered from LED Module chamber. Trulevel ball coupling mount is welded to housing and facilitates quick leveling and installation. Optics Emitters (LED’s) are arrayed on a metal core PCB panel with each emitter located on a copper thermal transfer pad and enclosed by an LED refractor. LED optics completely seal each individual emitter to meet an IP66 rating. In asymmetric distributions, a micro-reflector inside the refractor re-directs the house side emitter output towards the street side and functions as a house side shielding element. Refractors are injection molded H12 acrylic. Each LED refractor is sealed to the PCB over an emitter and all refractors are retained by an aluminum frame. Any one Panel, or group of Panels in a luminaire, have the same optical pattern. LED refractors produce standard site/area distributions. Panels are field replaceable and field rotatable in 90° increments. LED Emitters High output LED's are utilized with drive currents ranging from 350mA to 875mA. 70CRI Minimum. LED’s are available in standard Neutral White (4000K), or optional Cool White (5000K) or Warm White (3000K). Consult Factory for other LED options. LED Driver Constant current electronic with a power factor of >.90 and a minimum operating temperature of -40°F/-40°C. Driver(s) is/are UL and cUL recognized. In-line terminal blocks facilitate wiring between the driver and optical arrays. Drivers accept an input of 120-277V, 50/60Hz or 347V-480V, 50,60Hz. (0 - 10V dimmable driver is standard. Driver has a minimum of 3KV internal surge protection. Luminaire supplied with 20KV surge protector for field installation.) Amber LED’s PCA (Phosphor Converted Amber) LED’s utilize phosphors to create color output similar to LPS lamps and have a slight output in the blue spectral bandwidth. TRA (True Amber) LED’s utilize material that emits light in the amber spectral bandwidth only without the use of phosphors. Finish Polyester powder coat incorporates four step iron phosphate process to pretreat metal surface for maximum adhesion. Top coat is baked at 400°F for maximum hardness and exterior durability. DSAP25 Patent pending DSAP20 Patent pending 25" (635mm) 18.5" (470mm) 20" (508mm) 16.5" (419mm) TM (Formerly DSAP1) SOLID STATE AREA LIGHTING DSAP SERIES-PLED PROJECT NAME: FIXTURE TYPE: 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc.2021090 4/24/2024 SPECIFICATIONS DSAP25 E.P.A.= 1.23 Available in: 80 LED Module Max .50" dia. (13mm)(4) holes 5.5" (140mm) 5.5" (140mm) 7" sq. (178mm) Fixture DSAP25 18" (457mm) A B 18.5" (470mm) 25" (635mm) DSAP20 14" (356mm) C B C A Wall Plate Wall Mount ModulesMounting Styles DSAP20 E.P.A.= 0.77 Available in: 48 LED Module Max Extruded aluminum arm and cast aluminum wall bracket assembly provided with built in gasketed wire access for fixture/supply wire connection. 20" (508mm) 16.5" (368mm)a ORDERING INFORMATION WM Wallmount 1 XPK XPD XPS DSAP20-PLED (Formerly DSAP1) DSAP25-PLED Dark Bronze RAL-8019-T Green RAL-6005-T White RAL-9003-T Grey RAL-7004-T Black RAL-9005-T See USALTG.COM for additional arm styles Other LED Colors Available Consult Factory Distribution Type # of LEDs DSAP25 48LED 36LED 80LED1 DSAP20 48LED1 36LED 20LED Color Temp - CCT Drive Current NW (4000K)* *Standard CW (5000K) WW (3000K) 120 208 240 347 480 277 Luminaire Luminaire Optics LED Voltage Mounting Finish Options Optics LED Mode MountingVoltage Finish Options Spec/Order Example: DSAP20/PLED-II/48LED-350mA/NW/347/1/RAL-7005-S 48 LED Module 80 LED Module TM TM Type III Med. PLED-III-M Type III Wide PLED-III-W Type II PLED-II Type II Front Row PLED-II-FR Type IV PLED-IV-FT Type IV PLED-IV Type V Med. PLED-V-SQ-M Type V Wide PLED-V-SQ-W Type V Narrow PLED-VSQ-N StandardTextured Finish 1050mA2 875mA2 700mA2 525mA 350mA Amber3 Phosphor Converted Amber PCA4 True Amber5 TRA NOTES: 1 - 875mA maximum 2 - 700mA and 875mA not for use with TRA LED's 3 - Narrow band Ambers have no Definable CCT equivalent 4 - 700mA maximum 5 - Available in 350mA & 525mA drive currents only For smooth finish replace suffix “T” with suffix “S” (Example: RAL-9500-S) Consult factor for custom colors Photo Cell + Voltage (Example: PC120V) Double Fuse (208V, 240V) Single Fuse (120V, 277V) Internal House Side Shield inc. LED Count (Example: HS-PLED/48) Twist Lock Receptable Only High-Low Dimming for Switch by Others/Select Levels 50/100 or 25/100 (Example: HLSW/25) 7-Pin Twist Lock Receptable Only Blue-Tooth Programmable Photo/Motion Sensor (Factory - Motion 50/100; Photo 75fc) PC+V SF DF HS-PLED TPR HLSW TPR7 MS-F311 Stem Mount + Length(in) (48" Max) Chain Mount + Length(in) (48" Max) SM+L CM+L XPD 3" I.D. Arms are heavy wall extruded aluminum construction. For additional arm options see arm section. XPS 24" (610mm) 42" (1067mm) 42" (1067mm) 3" I.D. 24" (610mm) XPK 42" (1067mm) 3" I.D. 24" (610mm) DSAP SERIES - PLED 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc. 4/24/2024 LEDCount SourceType Source InitialLumens - 5000K CCT InitialLumens - 3000K CCT InitialLumens - 4000K CCT L70 greaterthan (HR)StartingTemp.System Watts Volts MaxInput Amps DSAP20 20 20 20 20 20 90,000+-40°F 22/28 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 .19/.24 .08/.11 .07/.08 90,000+-40°F 33/39 .28/.33 .12/.14 .10/.12 90,000+-40°F 44/50 .37/.42 .16/.18 .13/.15 90,000+-40°F 56/62 .47/.52 .21/.23 .17/.18 90,000+-40°F 67/73 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 .56/.61 .25/.27 .20/.21 90,000+-40°F 40/46 .34/.39 .15/.17 .12/.14 90,000+-40°F 60/66 .50/.55 .22/.24 .18/.20 90,000+-40°F 79/85 .66/.71 .29/.31 .23/.25 90,000+-40°F 101/107 .85/.90 .37/.39 .30/.31 90,000+-40°F 120/126 1.00/1.05 .44/.46 .35/.37 90,000+-40°F 53/59 .45/.50 .20/.22 .16/.17 90,000+-40°F 79/85 .66/.71 .29/.31 .23/.25 90,000+-40°F 106/112 .89/.94 .39/.41 .31/.33 90,000+-40°F 134/140 1.12/1.17 .49/.51 .39/.41 36 LED 90,000+-40°F 40/46 .34/.39 .15/.17 .12/.14 36 36 36 36 36 48 48 48 48 LED LED LED LED LED LED LED LED LED LED LED LED LED LED 20 PLED® Optical Module – 350mA 20 PLED® Optical Module – 525mA 20 PLED® Optical Module – 700mA 20 PLED® Optical Module – 875mA 20 PLED® Optical Module – 1050mA 36 PLED® Optical Module – 350mA 36 PLED® Optical Module – 525mA 36 PLED® Optical Module – 700mA 36 PLED® Optical Module – 875mA 48 PLED® Optical Module – 350mA 48 PLED® Optical Module – 525mA 48 PLED® Optical Module – 700mA 48 PLED® Optical Module – 875mA 36 PLED® Optical Module – 1050mA 36 PLED® Optical Module – 350mA 5126 – 5882 14659 – 16819 12199 – 13398 9699 – 11128 6821 – 7827 12755 – 14635 10994 – 12614 9149 – 10497 7274 – 8346 5116 – 5871 7086 – 8131 6108 – 7008 5083 – 5832 4042 – 4637 2842 – 3262 2700 – 3098 3839 – 4405 4829 - 5540 5802 – 6657 6732 – 7725 4860 – 5577 6910 – 7929 8691 – 9972 10444 – 11983 12117 – 13903 6480 – 7435 9214 – 10572 11589 – 13296 13926 – 15978 4870 – 5588 5383 – 6176 15392 – 17660 12808 – 14696 10183 – 11684 7162 – 8218 13392 – 15367 11544 – 13245 9606 – 11022 7638 – 8763 5371 – 6164 7441 – 8537 6413 – 7358 5337 – 6123 4243 – 4868 2984 – 3424 DSAP25 36 LED 90,000+-40°F 59/65 .50/.55 .23/.24 .17/.19 36 LED 90,000+-40°F 79/85 .66/.71 .29/.31 .23/.25 36 LED 90,000+-40°F 103/109 .86/.91 .38/.40 .30/.32 36 LED 90,000+-40°F 116/122 .97/1.02 .42/.44 .34/.36 48 LED 90,000+-40°F 53/59 .45/.50 .20/.23 .16/.17 48 PLED® Optical Module – 350mA 36 PLED® Optical Module – 525mA 36 PLED® Optical Module – 700mA 36 PLED® Optical Module – 875mA 36 PLED® Optical Module – 1050mA 7382 – 8470 7013 – 8047 7751 – 8894 9362 – 10742 8894 – 10205 9830 – 11279 10719 – 12298 10183 – 11682 11254 – 12913 12435 – 14268 11813 – 13554 13057 – 14981 6493 – 7450 6835 – 7843 7177 – 8235 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 DSAP SERIES - PLED LED/ Electrical Guide (pg. 1) 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc. 4/24/2024 LEDCount SourceType Source InitialLumens - 5000K CCT InitialLumens - 3000K CCT InitialLumens - 4000K CCT L70 greaterthan (HR)StartingTemp.System Watts Volts MaxInput Amps DSAP25 DSAP20 48 LED 90,000+-40°F 78/84 .65/.70 .29/.31 .23/.25 48 LED 90,000+-40°F 105/111 .88/.93 .38/.40 .31/.32 48 LED 90,000+-40°F 137/143 1.15/1.20 .50/.52 .40/.42 48 LED 90,000+-40°F 154/160 1.29/1.34 .56/.58 .45/.47 80 LED 90,000+-40°F 88/94 .74/.79 .32/.34 .26/.27 80 LED 90,000+-40°F 130/136 1.09/1.14 .47/.50 .38/.40 80 LED 90,000+-40°F 174/180 1.45/1.50 .63/.65 .50/.52 80 LED 90,000+-40°F 226/232 1.89/1.94 .82/.84 .66/.69 80 PLED® Optical Module – 350mA 80 PLED® Optical Module – 525mA 80 PLED® Optical Module – 700mA 80 PLED® Optical Module – 875mA 48 PLED® Optical Module – 525mA 48 PLED® Optical Module – 700mA 48 PLED® Optical Module – 875mA 48 PLED® Optical Module – 1050mA 9843 – 11294 9351 – 10729 10336 – 11859 12483 – 14323 11859 – 13607 13107 – 15038 14292 – 16397 13577 – 15577 15006 – 17217 16581 – 19024 15752 – 18073 17409 – 19975 11392 – 13071 10823 – 12418 11962 – 13724 16406 – 18823 15585 – 17882 17226 – 19765 20805 – 23871 19765 – 22678 21845 – 25065 23819 – 27329 22628 – 25962 25010 – 28695 20 51,000+-40°F 25 .21 .10 .08 20 51,000+-40°F 37 .31 .14 .11 20 51,000+-40°F 50 .42 .18 .15 PCA - LED PCA - LED PCA - LED 20 PLED® Optical Module – 350mA 20 PLED® Optical Module – 525mA 20 PLED® Optical Module – 700mA 2643 – 3033 2102 – 2411 1478 – 1696 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 Phosphor Converted Amber LED 36 51,000+-40°F 45 .38 .17 .13 36 51,000+ 51,000+ -40°F 67 .56 .25 .20 36 -40°F 89 .75 .33 .26 48 51,000+-40°F 59 .50 .22 .17 48 51,000+-40°F 89 .75 .33 .26 48 51,000+-40°F 118 .99 .43 .34 48 PLED® Optical Module – 350mA 48 PLED® Optical Module – 525mA 48 PLED® Optical Module – 700mA 36 PLED® Optical Module – 350mA 36 PLED® Optical Module – 525mA 36 PLED® Optical Module – 700mA 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED 6343 – 7278 5043 – 5787 3547 – 4070 4757 – 5459 3783 – 4340 2660 – 3053 120 277 347 36 -40°F36 PLED® Optical Module – 350mA DSAP25 51,000+45 .38 .17 .13 2666 – 3059 36 51,000+-40°F 66 .56 .24 .19 36 PLED® Optical Module – 525mA 120 277 347 3839 – 4405 DSAP SERIES - PLED LED/ Electrical Guide (pg. 2) 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc. 4/24/2024 LEDCount SourceType Source InitialLumens - 5000K CCT InitialLumens - 3000K CCT InitialLumens - 4000K CCT L70 greaterthan (HR)StartingTemp.System Watts Volts MaxInput Amps 36 51,000+-40°F 88 .74 .32 .26 51,000+-40°F 59 .50 .22 .17 48 48 51,000+-40°F 87 .73 .32 .25 48 51,000+-40°F 117 .98 .43 .34 80 51,000+-40°F 98 .82 .36 .29 80 51,000+-40°F 145 195 1.21 .52 .42 80 51,000+-40°F 1.63 .71 .57 66,500+-40°F 18 .15 .07 .06 48 PLED® Optical Module – 350mA 48 PLED® Optical Module – 525mA 48 PLED® Optical Module – 700mA 80 PLED® Optical Module – 350mA 80 PLED® Optical Module – 525mA 80 PLED® Optical Module – 700mA 36 PLED® Optical Module – 700mA 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED PCA - LED 854 – 979 20805 – 23871 16406 – 18823 11392 – 13071 6491 – 7448 5119 – 5873 3554 – 4078 4868 – 5586 DSAP20 20 TRA - LED 20 PLED® Optical Module – 350mA True Amber LED - 590nm 66,500+-40°F 26 .22 .10 .08 36 20 66,500+-40°F 31 .26 .12 .09 36 66,500+-40°F 47 .40 .17 .14 48 66,500+-40°F 41 .35 .15 .12 48 66,500+-40°F 62 .52 .23 .18 36 PLED® Optical Module – 350mA 36 PLED® Optical Module – 525mA 48 PLED® Optical Module – 350mA 48 PLED® Optical Module – 525mA 20 PLED® Optical Module – 525mA 120 277 347 120 277 347 120 277 347 120 277 347 120 277 347 TRA - LED TRA - LED TRA - LED TRA - LED TRA - LED 2451 – 2812 2048 – 2350 1838 – 2109 1536 – 1762 1022 – 1172 DSAP25 36 66,500+-40°F 31 .26 .12 .09 36 66,500+-40°F 46 .39 .18 .14 48 66,500+-40°F 41 .35 .19 .12 48 66,500+-40°F 61 .51 .22 .18 48 PLED® Optical Module – 350mA 48 PLED® Optical Module – 525mA 36 PLED® Optical Module – 350mA 36 PLED® Optical Module – 525mA 120 277 347 120 277 347 120 277 347 120 277 347 TRA - LED TRA - LED TRA - LED TRA - LED 2488 – 2854 2053 – 2355 1866 – 2140 1539 – 1766 DSAP25 Phosphor Converted Amber LED 80 66,500+-40°F 67 .56 .25 .20 80 PLED® Optical Module – 350mA 120 277 347 TRA - LED 3421 – 3925 DSAP SERIES - PLED LED/ Electrical Guide (pg. 3) 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc. 4/24/2024 1) Max Input Amps is the highest of starting, operating, or open circuit currents 2) System Watts includes the source watts and all driver components. 3) Lumen values for LED Modules vary according to the distribution type 4) For Wattage and Max Input Amps showing two values, use the higher value for luminaires with lit uplight windows (-L & -M) 5) PCA and TRA LED optics not recommended for use with lit uplight window models (-L & -M) 6) Fuse value should be sufficient to protect all wiring components. For electronic driver and LED component protection, use 20KV surge suppressors. 7) L70(10K) – TM-21 6x rule applied WARNING: All fixtures must be installed in accordance with local codes or the National Electrical Code. Failure to do so may result in serious personal injury. LEDCount SourceType Source InitialLumens - 5000K CCT InitialLumens - 3000K CCT InitialLumens - 4000K CCT L70 greaterthan (HR)StartingTemp.System Watts Volts MaxInput Amps DSAP25 True Amber LED - 590nm 80 66,500+-40°F 101 .85 .37 .30 80 PLED® Optical Module – 525mA 120 277 347 TRA - LED 4146 – 4757 DSAP SERIES - PLED LED/ Electrical Guide (pg. 4) 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.comU.S. Pole Co Inc. NOTES: 4/24/2024 588459 Chapel Ridge 1-Light LED Dimmable Wall Light SPECIFICATIONS MOUNTING: 10-Year limited warranty cETL/ETL Wet No Design House • 800.558.8700 • www.todaysdesignhouse.com Design House reserves the right to make changes in materials, specifications & models at any time. Design House also reserves the right to discontinue product without notice or obligation. TYPE: JOB: ORDER CODE: APPROVALS: INDOOR LIGHTING Wall Mount WARRANTY: UL/ETL CERTIFICATION: WET/DRY/DAMP LISTING: ADA COMPLIANT: Black 6/29/20 NoENERGY STAR CERTIFIED: SLOPED CEILING ADAPTABLE:No LAMP TYPE:LED BULB INCLUDED:Yes WATTS PER BULB:4.5W TOTAL WATTAGE:4.5W DIMMABLE:Yes MATERIAL CONSTRUCTION:Steel/Zinc ASSEMBLED DIMENSIONS:16.5" H x 7.25" L x 8.13" D WEIGHT:3.87 lbs. BACKPLATE DIMENSIONS:7" H x 4.5" W x 0.75" D CANOPY/PLATE DIMENSIONS:N/A GLASS/SHADE DIMENSIONS:10.5" H x 3.88" L x 3.88" D GLASS/SHADE MATERIAL:Glass GLASS/SHADE TYPE:Seedy GLASS/SHADE COLOR:Clear LED BRIGHTNESS (LUMENS):80 LED COLOR CORRELATED TEMPERATURE (CCT):2700K LED COLOR RENDERING INDEX (CRI):90 LED EFFICACY:80 LED AVERAGE RATED LIFE:15,000 hours ENERGY EFFICIENT:No LIGHTING AMPS:0.0375 A VOLTAGE:120V 4/24/2024