Loading...
HomeMy WebLinkAboutBerridge-L-Panel_Data-SheetAll information subject to change without notice. See website for details, specifications, and Watertightness Warranty requirements. © Berridge Manufacturing Company 2022 • (800) 669-0009 • www.Berridge.com Available smooth without grooves Available with one groove 1” (25 mm) 11 ” Coverage (290 mm) 3 ” (98 mm) Materials 24 and 22 Gauge Steel 0.032 Aluminum Specifications Uses: Soit, Ceiling, Fascia, Screen Wall Coverage: 11 " Finishes: Smooth, optional stucco emboss Fasteners: Concealed Applications: Vertical over open framing or solid sheathing Pattern: Optional vee-grooves and venting Installation Panel is available from the factory in continuous lengths to a maximum of 40’ May be site-formed using the Berridge FP-16 Roll Former Vented option provides 5.19 square inches of Net Free Vent Area (NFVA) per linear foot of panel. (BMC does not recommend vented products in applications subject to aggressive atmospheres, marine environments or high humidity due to the corrosive nature of these environments on raw edges of steel.) 0.032 Aluminum is factory formed only Berridge L-Panel The Berridge L-Panel is a versatile and maintenance- free panel for use on soit, ceilings, or fascia. The smooth, stucco embossed, and vented options allow this panel to be used throughout a project for many dierent applications. Pictured Above Project: Central Park Urban Living General Contractor: Palace Construction Co., Inc. Installing Contractor: Bighorn Metalworks, Inc. Color: COR-TEN AZP® Raw Available with vents Standard with two grooves SOFFIT, CEILING, AND FASCIA PANEL SYSTEM CORPORATE HEADQUARTERS 2610 Harry Wurzbach Road San Antonio, TX 78209 (800) 669-0009 www.Berridge.com CATEGORY CHARACTERISTIC TEST METHOD PURPOSE RESULT PERFORMANCE n Uplift Resistance ASTM E-1592 Test method to determine uplift resistance of open framing systems See Load Chart on Berridge website ROOF LISTINGS n Miami Dade TAS 202 TAS 201 TAS 203 ASTM E8 Miami Dade County approval of building products directly related to the structural wind resistance NOA #20-1013.11 (24 GA - Girts) n TDI Listed ASTM E-1592 Texas Department of Insurance Listing for wind capacities EC-88 (24 GA - Girts) BERRIDGE L-PANEL TESTING AND CERTIFICATION SUMMARY CHART n - Steel only o - Steel and Aluminum For further details please visit www.berridge.com