HomeMy WebLinkAboutC010.0.25 - Inlet Protection Filter Sock DetailFilter Sock
Flow
Flow
Flow
Flow
Flow
SOIL APPLICATIONS
INLET PROTECTION
Section
Pipe End
Overlap
2' (min.)
Overlap
2' (min.)
Filter Sock
Filter Sock
Flow
Flow
Flow
Overlap
2' (min.)
FlowFlow
Flow
Flow
Flow
Flow
Flow Flow
6
at ends and at 3' spacing
30lb. gravel or sand bags
Filter sock with weighted
INLET PROTECTION
PAVEMENT APPLICATIONS
Overlap
2' (min.)
at ends and at 3' spacing
30 lb. gravel or sand bags
Filter sock with weighted
6
E 205-TECD-02
INDIANA DEPARTMENT OF TRANSPORTATION
STANDARD DRAWING NO.
DATECHIEF ENGINEER
DATEDESIGN STANDARDS ENGINEER
SEPTEMBER 2019
PROTECTION, FILTER SOCK
TEMPORARY INLET
upon a lane open to traffic.
closed to traffic. Inlet protection shall not cause water to encroach
6 Inlet protection shall be used within a lane or shoulder only when
stable.
5. Inlet protection shall be removed after the surrounding area becomes
identified after each storm event.
4. Sediment and gravel deposited on roadways shall be removed once
of the filter sock depth has been filled or as directed.
days and after each storm event. Sediment shall be removed when 1/3
Inlet protection shall be inspected, at a minimum once every seven 3.
Standard Drawing E 205-TECD-10 for securing methods.
shown or in accordance with the manufacturer's instructions. See
2. Filter sock shall be secured to prevent movement and undercutting as
Fiber roll may be substituted for filter sock.1.
NOTES:
5/2/2019
5/31/2019
Attachment E