Loading...
HomeMy WebLinkAboutTom Wood Honda (N) S-2024-00255CITY OF CARMEL/CLAY TOWNSHIP, HAMILTON COUNTY, INDIANA SIGN PERMIT APPLICATION 1. SIGN PERMIT NUMBER: S-2024-00255 SIGN COPY: Honda with wing (horizontal) - (E)SIGN ADDRESS: 3006 E 96TH ST SIGN TYPE: Wall SIGN DURATION: Permanent (*See #7 Disclaimers, pg. 3) SIGN AREA DIMENSIONS: 39" x 253.75"TOTAL SIGN AREA SQ. FT.: 68.72 WALL MOUNTED SIGNS: SPANDREL PANEL DIMENSIONS: 85" x 338.5" SIGN DIMENSION AS A % OF SPANDREL PANEL: 45.88% x 74.96% HEIGHT OF SIGN FROM GROUND: 258"NUMBER OF SIDES: 1.00 (wall sign: measure to bottom of sign; groundsign: measure to top of sign) BUILDING / TENANT SPACE FRONTAGE: n/a SIGN DISTANCE FROM NEAREST R.O.W.: >5' (R.O.W. stands for Right of Way. The inside edge of sidewalk is often the end of the R.O.W. (City’s property) and a good spot to measure from.) LAND ACREAGE: n/a (Applies only to Temporary signs)SIGN FACE COLOR(S): red ILLUMINATION METHOD: Internal BUILDING TYPE: Commercial IDENTIFY ANY EXISTING SIGNS ON SITE: Tom Wood, Service, Logo WHAT WAS THE NAME OF THE PREVIOUS TENANT (IF APPLICABLE)? TruWorth Auto SHOPPING CENTER OR COMPLEX NAME: Tom Wood Honda SIGN STATUS: New TOTAL SIGN AREA PERMISSABLE SQ. FT.: 118.89 OTHER ILLUMINATION METHOD: OTHER BUILDING TYPE: n/a 2. ZONING PARCEL ID: 17-14-07-04-06-014.001 ZONING DISTRICT: B-3 WIDE VARIETY OF COMMERCIAL AND OFFICE USES IN TRANSITIONAL LOCATIONS PRIOR APPROVALS: P.C. Docket # PZ-2023-00273AA,11060015AA B.Z.A. Docket # n/a Building Permit# n/a 3. APPLICANT PERMIT NUMBER: S-2024-00255 NAME OF BUSINESS*: Tom Wood Honda CITY: Indianapolis CONTACT EMAIL: Jfeltman@tomwood.com PHONE: 317-688-6001 ADDRESS: 9820 Association Ct CONTACT PERSON: Joe Feltman (*Entity identified on the sign) STATE: IN ZIP: 46280 PROPERTY OWNER: Jeffery Wood PHONE: CONTACT PERSON: Kyle VanDeman CONTACT EMAIL: sales@rileysignshop.com ADDRESS: 5800 Massachusetts Avenue ZIP: 46218STATE: INCITY: Indianapolis I CERTIFY THAT A PICTURE OF THIS SIGN WILL BE SUBMITTED TO THE DEPARTMENT OFCOMMUNITYSERVICES WITHIN ONE (1) WEEK AFTER ERECTION OF THE SIGN. -OR- I WOULD PREFER AN INSPECTION FEE BE ADDED TO THE COST OF THIS PERMIT TO COVER THE COST OF THE STAFF OF THE DEPARTMENT OF COMMUNITY SERVICES TAKING THIS PICTURE. Y N 4. SIGN COMPANY/OWNER'S REP COMPANY NAME: Kyle VanDeman CONTACT PERSON: Kyle VanDeman ADDRESS: 5800 Massachusetts Avenue ZIP: 46218STATE: INCITY: Indianapolis EMAIL ADDRESS: sales@rileysignshop.com PHONE: 3174732436 PERMIT NUMBER: S-2024-00255 Page 1 of 3 CITY OF CARMEL/CLAY TOWNSHIP, HAMILTON COUNTY, INDIANA SIGN PERMIT APPLICATION 5.FEES (COMPLETED BY DOCS STAFF)PERMIT NUMBER: S-2024-00255 ADMINISTRATIVE ADLS AMENDMENT SIGN PERMIT APPLICATION $120.50 SIGN ERECTION $206.49 INSPECTION FEE (Required if photography not provided) TOTAL FEE $326.99 PERMIT ISSUED ON: 9/19/2024 9:18:52AM FEE RECEIVED ON: 6.DISCLAIMERS (COMPLETED BY DOCS STAFF) APPLICANT, PLEASE NOTE THE FOLLOWING: PERMANENT SIGNS: •IF THE SIGN IN THIS APPLICATION IS A PERMANENT SIGN, THIS SIGN PERMIT IS APPROVED FOR THIS SIGN ATTHIS LOCATION ONLY. •IF THE APPLICANT RELOCATES AT A FUTURE DATE/TIME TO A NEW BUILDING, A NEW SIGN PERMIT IS REQUIRED FOR THE NEW LOCATION. ALL FEES APPLY. TEMPORARY SIGNS: •IF THE SIGN IN THIS APPLICATION IS A TEMPORARY SIGN, THIS SIGN PERMIT EXPIRES ON: THIS SIGN PERMIT MAY BE RENEWED ANNUALLY FOR AN ADDITIONAL YEAR WITH A PERMIT BY RE-APPLYING. ALL FEES APPLY. •IF THE SIGN IN THIS APPLICATION IS FOR AN INTERIM BANNER PENDING A PERMANENT SIGN, IT IS APPROVED FOR A THREE MONTH TIME PERIOD FROM THE DATE THE PERMIT IS APPROVED. A SIGN PERMIT IS REQUIRED. IT MAY BE RENEWED FOR AN ADDITION THREE MONTHS WITH A PERMIT BY RE-APPLYING. ALL FEES APPLY THE APPLICANT CERTIFIES THAT THE FOREGOING SIGNATURES, STATEMENTS AND ANSWERS HEREIN CONTAINED AND THE INFORMATION HEREWITH SUBMITTED ARE IN ALL RESPECTS TRUE AND CORRECT, AND THIS SIGN WILL BE ERECTED AND MAINTAINED IN ACCORDANCE WITH ALL APPLICABLE LAWS OF THE STATE OF INDIANA, AND THE ZONING ORDINANCE OF CARMEL/CLAY TOWNSHIP, INDIANA AND ALL ACTS AMENDATORY THERETO, AND SHALL BE ERECTED WITHIN SIX (6) MONTHS OF THE DATE OF ISSUANCE OR THIS PERMIT IS NULL AND VOID. FURTHER, THE APPLICANT CERTIFIES BY SIGNING THIS APPLICATION THAT ALL REPRESENTATIVES OF THE DEPARTMENT OF COMMUNITY SERVICES ARE ADVISORY. 7.CITY CONTACT PLEASE DIRECT ANY SIGN QUESTIONS TO THE DEPARTMENT OF COMMUNITY SERVICES (DOCS): CITY OF CARMEL Or call at 317-571-2417 DOCS 1 CIVIC SQUARE CARMEL, IN 46032 Page 2 of 3 HP-22 WING VOLTS:AMP:CIRC: ITEM PART NO. INSTALLATION:INTERIOR ELECTRICAL SPECIFICATIONS: EXTERIOR 120 VAC 12.0 A QTYDESCRIPTION WEIGHT:0000 lbs -X 1 2 3 4 5 6 7 8 9 10 ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ .040 ALUMINUM PRE-PAINTED RETURNS 1" JEWELITE TRIM CAP .177 #2447 WHITE ACRYLIC w/ VINYL 3MM SIGNABOND BACKS AGILIGHT SIGNRAYZ TRUE RED LED's AGILIGHT 60W REMOTE POWER SUPPLY WALL BUSTERS 1/4 RIVET NUTS 1/4 ALL THREAD ROD w/ NUTS & WASHERS 3'-3" WING LOGO 22" HONDA (HONDA MOTORCYCLES) xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx Colors:# C B D COIL: SATIN ANODIZEDA VINYL: 3M 3630-73 RED JEWELITE: 1" METALLIC SILVER #Notes: 1 2 3 CUSTOMER:CASE:HONDA MOTORCYCLES www.pattisonsign.com / toll free (866) 218-1976 © 2018 PATTISON SIGN GROUP. ALL RIGHTS RESERVED, NO PART OF THIS DRAWING MAY BE REPRODUCED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM PATTISON SIGN GROUP. PAGE:of 2PROJECT ID: DRAWN BY: CUSTOMER: DATE: LOCATION: CASE: 12/03/2021 CHECKED BY:JOB: C.WILLIAMS HONDA MOTORCYCLES #Revision(s)By:Date: 4 Description of change ??##/##/## 3 2 1 This sign is intended to be installed in accordance with the requirements of National Electrical Code (NEC) or NFPA 70 and of the Canadian Electrical Code (CE Code) or CSA C22.1 and/or other applicable local codes. This includes proper grounding and bonding of the sign. Pattison Sign Group illuminated signs product may contain Fluorescent, Neon and/or HID Lamps. These lamps contain Mercury (Hg). Disposal of these lamps will be the responsibility of the recipient, according to Local, Provincial, State or Federal Laws. IF THIS AGREEMENT INCLUDES THE MANUFACTURING AND INSTALLATION OF A BASE(S) BY PATTISON SIGN GROUP FOR THE SIGNS ORDERED HEREIN, SUCH BASE(S) SHALL BE BUILT AND INSTALLED IN ACCORDANCE WITH APPLICABLE LAWS AND REGULATIONS. IF A BASE(S) IS TO BE BUILT OR PROVIDED BY THE CUSTOMER (OR AGENT), AND NOT BY PATTISON SIGN GROUP, THE CUSTOMER SHALL ENSURE THAT THE BASE(S) ARE BUILT AND INSTALLED IN ACCORDANCE WITH APPLICABLE LAWS AND REGULATIONS AND SHALL HOLD PATTISON SIGN GROUP AND ITS EMPLOYEES, REPRESENTATIVES, AGENTS AND OFFICERS, HARMLESS AND INDEMNIFY IT AGAINST ANY AND ALL CLAIMS, LIABILITIES, ACTIONS, PENALTIES, FINES, AND ANY LEGAL FEES INCURRED BY PATTISON SIGN GROUP ARISING FROM THE FAILURE OF THE CUSTOMER (AND/OR IT'S AGENT) OBLIGATION(S). 2447 Acrylic w/ Vinyl CW 12/03/2021 Modules: 108 PS Name: Agilight 60 Watt Modules: 82 PS Name: Agilight 60 Watt 190 Modules: Agilight - SignRayz COLOR Gen 2 True Red - LS-COLOR-TR-G2 1 3' - 3 " 1' - 1 0 " 21'-13 4"5" ABC HARDWARE TO SHIP: (39) - 1/4 ALL THREAD ROD w/ NUTS & WASHERS (10) - WALL BUSTER TUBES (1) - MOUNT PATTERN (1) - LED WIRING DIAGRAM HP-22 WING VOLTS:AMP:CIRC: ITEM PART NO. INSTALLATION:INTERIOR ELECTRICAL SPECIFICATIONS: EXTERIOR 120 VAC 12.0 A QTYDESCRIPTION WEIGHT:0000 lbs -X 1 2 3 4 5 6 7 8 9 10 ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ .040 ALUMINUM PRE-PAINTED RETURNS 1" JEWELITE TRIM CAP .177 #2447 WHITE ACRYLIC w/ VINYL 3MM SIGNABOND BACKS AGILIGHT SIGNRAYZ TRUE RED LED's AGILIGHT 60W REMOTE POWER SUPPLY WALL BUSTERS 1/4 RIVET NUTS 1/4 ALL THREAD ROD w/ NUTS & WASHERS 3'-3" WING LOGO 22" HONDA (HONDA MOTORCYCLES) xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx Colors:# C B D COIL: SATIN ANODIZEDA VINYL: 3M 3630-73 RED JEWELITE: 1" METALLIC SILVER #Notes: 1 2 3 CUSTOMER:CASE:HONDA MOTORCYCLES www.pattisonsign.com / toll free (866) 218-1976 © 2018 PATTISON SIGN GROUP. ALL RIGHTS RESERVED, NO PART OF THIS DRAWING MAY BE REPRODUCED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM PATTISON SIGN GROUP. PAGE:of 2PROJECT ID: DRAWN BY: CUSTOMER: DATE: LOCATION: CASE: 12/03/2021 CHECKED BY:JOB: C.WILLIAMS HONDA MOTORCYCLES #Revision(s)By:Date: 4 Description of change ??##/##/## 3 2 1 This sign is intended to be installed in accordance with the requirements of National Electrical Code (NEC) or NFPA 70 and of the Canadian Electrical Code (CE Code) or CSA C22.1 and/or other applicable local codes. This includes proper grounding and bonding of the sign. Pattison Sign Group illuminated signs product may contain Fluorescent, Neon and/or HID Lamps. These lamps contain Mercury (Hg). Disposal of these lamps will be the responsibility of the recipient, according to Local, Provincial, State or Federal Laws. IF THIS AGREEMENT INCLUDES THE MANUFACTURING AND INSTALLATION OF A BASE(S) BY PATTISON SIGN GROUP FOR THE SIGNS ORDERED HEREIN, SUCH BASE(S) SHALL BE BUILT AND INSTALLED IN ACCORDANCE WITH APPLICABLE LAWS AND REGULATIONS. IF A BASE(S) IS TO BE BUILT OR PROVIDED BY THE CUSTOMER (OR AGENT), AND NOT BY PATTISON SIGN GROUP, THE CUSTOMER SHALL ENSURE THAT THE BASE(S) ARE BUILT AND INSTALLED IN ACCORDANCE WITH APPLICABLE LAWS AND REGULATIONS AND SHALL HOLD PATTISON SIGN GROUP AND ITS EMPLOYEES, REPRESENTATIVES, AGENTS AND OFFICERS, HARMLESS AND INDEMNIFY IT AGAINST ANY AND ALL CLAIMS, LIABILITIES, ACTIONS, PENALTIES, FINES, AND ANY LEGAL FEES INCURRED BY PATTISON SIGN GROUP ARISING FROM THE FAILURE OF THE CUSTOMER (AND/OR IT'S AGENT) OBLIGATION(S). 2447 Acrylic w/ Vinyl CW 12/03/2021 5 2 1 2 3 4 5 6 7 8 9 X APPROVED BY DATE COPYRIGHT © 2024 ALL RIGHTS RESERVED This computerized drawing/rendering is an original unpublished design created by Riley Signs in connection with a project that we are planning for our clients.It is not to be shared, copied, reproduced, exhibited, or shown to anyone outside of your organization without written premission from Riley Signs. Client Revisions Install Location Job #Date Sales Person Design Person Scale Tom Wood Powersports 96th St. Location Add 08/05/24 N/A N/A Kyle V. Allan A. TOM WOOD POWERSPORTS Illuminated Letter Sets CL SOUTH ELEVATION SCALE:1/16"=1'-0" 28 ' - 9 " 110'-2 1/4" CL 14” 8’- 5 3/32” CL EQ EQ 16” 21 7 . 5 ” 22 1 ” 12 6 . 2 5 ” EQ EQ 16” EAST ELEVATION SCALE: 1/8"=1'-0" Spandrel: 203”wX37”h Spandrel: 173”wX167”h Spandrel: 46’6”wX37”h Spandrel: 338.5”wX85”h 25 8 ” Aluminum construcon Filler: San Anodi zed finish Trim-cap: 1” Jewelite San Sil ver 2793 Red acrylic faces Internally illuminated with Red LED Electrical hook-up by others Helvec a Condensed Bold Oblique TOM WOOD 11'-4 7/32" 14'-1 15/16" 18.88 sq.ft. 15.14 sq.ft. 68.45 sq.ft. SER VICE1'-4" 1'-4" 1'-10" 3'-3" 4'-9 1/8" 21'-3/4" 16'-2 1/4" T4 - 48.3 sq.. 10'-4 1/4" 1'-2" 6'-10 9/16" 10'-1 3/4" 12.07 sq.ft. 69.80 sq.ft. 8'-5 3/32" X APPROVED BY DATE COPYRIGHT © 2024 ALL RIGHTS RESERVED This computerized drawing/rendering is an original unpublished design created by Riley Signs in connection with a project that we are planning for our clients.It is not to be shared, copied, reproduced, exhibited, or shown to anyone outside of your organization without written premission from Riley Signs. Client Revisions Install Location Job #Date Sales Person Design Person Scale Tom Wood Powersports 96th St. Location Add 08/05/24 N/A N/A Kyle V. Allan A. TOM WOOD POWERSPORTS Illuminated Monument Custom HPH Pylon Sign D/F Illuminated Honda Powerhouse Pylon Sign Specificaons: Aluminum construcon painted to match Honda silver Graphics routed out and backed up with 2793 Red acr ylic Illuminated with H.O. fluorescent lamps Electrical hook-up by others Aluminum panels painted to match Honda silver chrome acorn nut covers New concrete base required Honda Powerhouse Custom Pylon Size 6'-0" (1,829 mm) 1'-2 1/4" (362 mm) 5'-0" (1,523 mm) 3'-11 1/4" (1,199 mm) SCALE: SITE PLAN 1 1"=20'-0" ARCHITECTURAL 520 West Summit Hill Drive, Suite 702, Knoxville, TN, U.S.A. 37902 (TF) 1.866.635.1110 • (F) 888.694.1106 • www.pattisonsign.com LETTER OF AUTHORIZATION Location: Dealer # 106217 Site Address: 3006 E 96th St. Indianapolis, IN, 46240 On behalf of the owner and/or as owner representative, I, (PLEASE PRINT) ______________________________________, give Pattison ID and/or their agents authorization to apply for permits, secure all necessary municipal approvals and install proposed sign package at the above-mentioned property. Date: _______________________________ Signed: _______________________________ Printed Name & Title: ______________________ Company Name: ___________________________ Address: _________________________________ Telephone: _______________________________ Email: ___________________________________ Joe Feltman 7-30-2024 Joe Feltman Tom Wood Inc. 9820 Association Ct 317-688-6001 Jfeltman@tomwood.com Receipt#:17426 Carmel City Hall:317-571-2400 Date:9/20/2024 One Civic Square www.carmel.in.gov Payment Receipt Paid ByKyle VanDeman Invoice #Case Type Case Number Sub Type -SIGN S-2024-00255 COM Tender Type/Description Amount CREDIT-Credit Card 326.99 - - Sub Total:326.99 Fees: Fees Code /Description Amount SIGNINIMP-Sign Installation Improvement 206.49 SIGNPERMIT-Sign Permit 120.50 - - - - - - Sub Total:326.99 Total Amount Due:326.99 Total Payment:326.99 Received By:ashalit Code:DEFAULT_Recpt17426_20_9_2024_ashalit Page:1 of 1