Loading...
HomeMy WebLinkAboutPacket for HO 12-19-241 EXPLANATION OF PROJECT The City of Carmel Redevelopment Commission is the owner of parcels of real estate that are identified by the Auditor of Hamilton County, Indiana as Parcel Numbers 16-09-25-16- 01-003.000 and 16-09-25-16-01-001.000 (collectively, the “CRC Parcels”). Abdolaziz M. & Masoomeh Ardalan, as Trustees of the Abdolaziz M. Ardalan Living Trust and the Masoomeh Ardalan Living Trust (collectively referred to herein as “Ardalan”) are the owner of parcels of real estate that are identified by the Auditor of Hamilton County, Indiana as Parcel Numbers 16- 09-25-16-01-003.001 and 16-09-25-16-01-002.000 (collectively, the “Ardalan Parcels”). The CRC Parcels and the Ardalan Parcels are collectively referred to herein as the “Real Estate”. The Real Estate is zoned C-2, is slightly less than 1 acre and is located south of and adjacent to Main Street, north of and adjacent to 1st Street SW, west of and adjacent to 3rd Avenue SW and east of and adjacent to 4th Avenue SW. Ardalan has filed applications seeking Development Plan, Architectural Design, Lighting, Landscaping and Signage approval (collectively, “DP/ADLS”), as well as certain development standards variances that are described below (collectively, the “Variances”). The DP/ADLS and Variances are collectively referred to herein as the “Applications”. The Applications seek approval for a mixed-use building to be constructed on the Real Estate that will consist of: (i) retail uses (a restaurant space, retail tenant spaces and an art gallery) and five (5) enclosed private residential garages on the first floor; (ii) four (4) luxury condominium residences on the second floor; (iii) the Ardalan’s personal residence on the third floor; and, (iv) the Ardalan’s private roof-top terrace including a greenhouse. The proposed mixed-use building is elegantly and exquisitely designed, as the architecture is modeled and themed after an Italian Villa including details such as decorative columns, cornices, and balustrades. The 3-story Building provides a continuation of activated ground floor retail and restaurant spaces along Main Street. Further, the luxury condominium residences are thoughtfully and purposely designed and include such features as: spacious out- door balconies; multiple bedrooms and living spaces, with high-end interior finishes and soaring 12-foot ceilings. In addition to the five (5) enclosed private residential garages on the first floor, other on- site parking spaces are provided for on the Real Estate, and the City’s structured parking garage is immediately adjacent to the Real Estate on 3rd Avenue SW. 2 Associated with the development of the Real Estate, Ardalan is also seeking approval of the following Variances. UDO Section 2.36 Maximum Lot Coverage: The UDO standard for C-2 allows a maximum parcel coverage of 80%; the variance requests a maximum parcel coverage of 90%. UDO Section 2.36 Maximum Building Height: The UDO standard for C-2 allows a maximum building height of 35 feet for a principal building when adjacent to single- family residences; the variance requests 65’. UDO Section 1.07 Transportation Plan – Transportation Plan compliance is required; requesting Thoroughfare Plan Map, Mobility & Pedestrian Plan Map, Street Topographies and Streetscape Facilities modifications. UDO Section 5.21 Minimum buffer yard width: Shall be equal to the building height of the nearest building to each side or rear lot line, not to exceed 35’; 5’ width requested. Also requesting planting standard to be per the submitted landscape plans Statement of Support We have collected items of concern from City o icials and the surrounding neighbors. On Wednesday, December 11, I will be meeting with several interested neighbors to discuss any additional concerns they may have, as well as review the project adjustments in detail that have been made in response to concerns. Ownership has agreed to make the adjustments shown in the plan on the next page. Hi Neighbors! Please forward this email to any interested neighbors … I may not have their email… I am the architect for Soori’s project on the corner, and I think I have a few ideas on how to alleviate most concerns with the project. I am meeting with David G and Darin at our o%ice Wednesday morning at 9:00 if anyone else would like to attend to discuss concerns. I am in receipt of several emails from the city, and I think the following is a list of primary concerns I have gathered: 1. The dedicated alley curb cut to the west side of the site. Cut through tra ic, headlight glare and general tra ic concerns seem to be the concern here. a. Soori is ok with “dead ending” the alley and only entering the garages from the east. We can screen the end of the alley with landscaping to reduce headlight concerns. I believe the city is also studying stop sign options for the surrounding block. 2. Building Height – Listed at 65’ in the variance a. I have included sections of the three bordering streets and the relative heights of the buildings across each street. I think the 65’ has been somewhat misleading. The eave of the primary façade is at roughly 35’ (depending on where you are on the sloping site). The third story is set back 20’ from the street façade and the eave is roughly at 48’. Currently only the stair towers and elevator overrun extend to the 63’ height. You will see in the floor plan that each is at least 30’ from the perimeter of the building on the east side and 47 feet on the west side. 3. Location of the potential restaurant space a. We have swapped the spaces in the building to place Soori’s gallery on the west side. This will eliminate the outdoor eating plaza on the corner. Our outdoor seating will be on the raised plinth in front of the building on Main Street east of the building entrance closer to Savor, if indeed, we actually have a restaurant. (No deal confirmed yet). I have made some notes on the attached floor plan. 4. Concern with general drainage pattern a. Our civil engineer, Aaron Hurt, will be available at the hearing to answer any specific questions, but in general an underground detention storage system is included below the dedicated alley. This will collect all runo%, filter it, and release it accordingly into the city storm system at a rate acceptable to City engineering. 5. Future project concerns for the south half of the block a. This is the toughest to address since the ground is not part of our project and is currently for sale. A townhome plan has been floated as a possibility, but it is only a notion. One reason for dedicating the alley is to provide future access to the rear of this property should garages be part of the plan. I appreciate all of you, and your interest in planning a thoughtful city. I look forward to discussing these proposals with you and hopefully earning your support. Dan Moriarity Principal Studio M Architecture and Planning 275 Veterans Way, Suite 200 Carmel, IN 46032 T: 317.810.1502 M: 317.496.0486 UP UP PROPOSED BUILDING F.F.E. = 831.00 1ST ST. SW 3R D A V E . S W W MAIN STREET 4T H A V E . S W 8 A B 34567 12 C D E F G H 8 34567 12 A B C D E F G H DE S C R I P T I O N DA T E NO RE V I S I O N R E C O R D DA T E : DW G S C A L E : DR A W N B Y : CH E C K E D B Y : AP P R O V E D B Y : PR O J E C T N O : SHEET OF DRAWING NO.: 34 4 - 5 8 3 DE C E M B E R 0 6 , 2 0 2 4 DR A F T 33 ST U D I O M A R C H I T E C T AR D A L A N P L A Z A 33 1 W . M A I N S T R E E T CA R M E L , I N D I A N A 4 6 0 3 2 Ci v i l & E n v i r o n m e n t a l Co n s u l t a n t s , I n c . ww w . c e c i n c . c o m 53 0 E . O h i o S t r e e t Ph : 3 1 7 . 6 5 5 . 7 7 7 7 In d i a n a p o l i s , I N 4 6 2 0 4 Su i t e G NORTH DA T E : DW G S C A L E : DR A W N B Y : CH E C K E D B Y : AP P R O V E D B Y : PR O J E C T N O : SHEET OF DRAWING NO.: 1" = 2 0 ' DR A F T DR A F T DR A F T C200 SI T E L A Y O U T A E R I A L O V E R L A Y PROPOSED BUILDING F.F.E. = 831.00 A MMM G G G A A BB DD DDDD DD DD Y Z O Z Z Y Y Z V V DD C A A T D J T CD C C C A A X X L L L L LL L L L L L L L L L L G G D I DD N S S I I L X K L D DD XX P C C C A L Z ZZY L N N G G 3R D A V E . S W W MAIN STREET XX X Y Z Z Z E E P UTILITY NOTE: SITE LEGEND: A B C D E F G + I J K L M N O P 4 R S T U V : X Y Z AA BB SITE KEY NOTES: CC DD 8 A B 34567 12 C D E F G H 8 34567 12 A B C D E F G H DE S C R I P T I O N DA T E NO RE V I S I O N R E C O R D DA T E : DW G S C A L E : DR A W N B Y : CH E C K E D B Y : AP P R O V E D B Y : PR O J E C T N O : SHEET OF DRAWING NO.: 34 4 - 5 8 3 DE C E M B E R 0 6 , 2 0 2 4 DR A F T 33 ST U D I O M A R C H I T E C T AR D A L A N P L A Z A 33 1 W . M A I N S T R E E T CA R M E L , I N D I A N A 4 6 0 3 2 Ci v i l & E n v i r o n m e n t a l Co n s u l t a n t s , I n c . ww w . c e c i n c . c o m 53 0 E . O h i o S t r e e t Ph : 3 1 7 . 6 5 5 . 7 7 7 7 In d i a n a p o l i s , I N 4 6 2 0 4 Su i t e G NORTH DA T E : DW G S C A L E : DR A W N B Y : CH E C K E D B Y : AP P R O V E D B Y : PR O J E C T N O : SHEET OF DRAWING NO.: 1" = 2 0 ' DR A F T DR A F T DR A F T C201 7 SI T E L A Y O U T P L A N NOTES TO CONTRACTOR: ANTICIPATED CONSTRUCTION DATE: ZONING DATA: ADJACENT ZONING CLASSIFICATIONS: SITE DATA: LOT COVERAGE: PARKING DATA: BUILDING DATA: 12/06/2024 UP UP PROPOSED BUILDING F.F.E. = 831.00 W MAIN STREET 4T H A V E . S W 2 GS4 13 AB5 3 SM 5 AG 34 GJ 16 HF 3 FB 3 FB 6 GJ 7 AM3 3 UP3 25 BG 52 GJ 206 LB 3 HW 1 IV 2 HW 3 IR 1 AG 88 LB 9 TH 3 HW 8 GJ 3 GJ 8 R3 1 QB 534 SPO 32 TH 245 sf TS2 13 FB 41 LB 2 TH 1 GP 39 LB 3 FB 2 TH 12 AS 2 TH 2 HW 12 GJ 1 GP 25 HF 8 A B 34567 12 C D E F G H 8 34567 12 A B C D E F G H DE S C R I P T I O N DA T E NO RE V I S I O N R E C O R D DA T E : DW G S C A L E : DR A W N B Y : CH E C K E D B Y : AP P R O V E D B Y : PR O J E C T N O : SHEET OF DRAWING NO.: 34 4 - 5 8 3 DE C E M B E R 0 6 , 2 0 2 4 DR A F T 33 ST U D I O M A R C H I T E C T AR D A L A N P L A Z A 33 1 W . M A I N S T R E E T CA R M E L , I N D I A N A 4 6 0 3 2 Ci v i l & E n v i r o n m e n t a l Co n s u l t a n t s , I n c . ww w . c e c i n c . c o m 53 0 E . O h i o S t r e e t Ph : 3 1 7 . 6 5 5 . 7 7 7 7 In d i a n a p o l i s , I N 4 6 2 0 4 Su i t e G NORTH DA T E : DW G S C A L E : DR A W N B Y : CH E C K E D B Y : AP P R O V E D B Y : PR O J E C T N O : SHEET OF DRAWING NO.: 1" = 2 0 ' DR A F T DR A F T DR A F T C700 13 LA N D S C A P E P L A N GENERAL LANDSCAPE NOTES: ADDITIONAL CITY OF CARMEL NOTES: 12/06/2024 One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com © 2011-2024 Acuity Brands Lighting, Inc. All rights reserved. DSX0-LED Rev. 03/26/24 Page 1 of 9 COMMERCIAL OUTDOOR D-Series Size 0 LED Area Luminaire Specifications Catalog Number Notes Type Introduction The modern styling of the D-Series features a highly refined aesthetic that blends seamlessly with its environment. The D-Series offers the benefits of the latest in LED technology into a high performance, high efficacy, long-life luminaire. The photometric performance results in sites with excellent uniformity, greater pole spacing and lower power density. D-Series outstanding photometry aids in reducing the number of poles required in area lighting applications, with typical energy savings of 70% and expected service life of over 100,000 hours. EPA:0.44 ft2 (0.04 m2) Length:26.18" (66.5 cm) Width:14.06" (35.7 cm) Height H1:2.26" (5.7 cm) Height H2:7.46" (18.9 cm) Weight:23 lbs (10.4 kg) Hit the Tab key or mouse over the page to see all interactive elements. Ordering Information EXAMPLE: DSX0 LED P6 40K 70CRI T3M MVOLT SPA NLTAIR2 PIRHN DDBXD DSX0 LED Series LEDs Color temperature 2 Color Rendering Index 2 Distribution Voltage Mounting DSX0 LED Forward optics P1 P5 P2 P6 P3 P7 P4 Rotated optics P10 1 P12 1 P11 1 P13 1 (this section 70CRI only) 30K 3000K 40K 4000K 50K 5000K (this section 80CRI only, extended lead times apply) 27K 2700K 30K 3000K 35K 3500K 40K 4000K 50K 5000K 70CRI 70CRI 70CRI 80CRI 80CRI 80CRI 80CRI 80CRI AFR Automotive front row T1S Type I short T2M Type II medium T3M Type III medium T3LG Type III low glare 3 T4M Type IV medium T4LG Type IV low glare 3 TFTM Forward throw medium T5M Type V medium T5LG Type V low glare T5W Type V wide BLC3 Type III backlight control 3 BLC4 Type IV backlight control 3 LCCO Left corner cutoff 3 RCCO Right corner cutoff 3 MVOLT (120V-277V) 4 HVOLT (347V-480V) 5,6 XVOLT (277V-480V) 7,8 120 16, 24 208 16, 24 240 16, 24 277 16, 24 347 16, 24 480 16, 24 Shipped included SPA Square pole mounting (#8 drilling, 3.5" min. SQ pole) RPA Round pole mounting (#8 drilling, 3" min. RND pole) SPA5 Square pole mounting (#5 drilling. 3" min. SQ pole) 9 RPA5 Round pole mounting (#5 drilling, 3" min. RND pole) 9 SPA8N Square narrow pole mounting (#8 drilling, 3" min. SQ pole) WBA Wall bracket 10 MA Mast arm adapter (mounts on 2 3/8" OD horizontal tenon) Control options Other options Finish (required) Shipped installed NLTAIR2 PIRHN nLight AIR gen 2 enabled with bi-level motion / ambient sensor, 8-40' mounting height, ambient sensor enabled at 2fc. 11, 12, 18, 19 PIR High/low, motion/ambient sensor, 8-40’ mounting height, ambient sensor enabled at 2fc 13, 18, 19 PER NEMA twist-lock receptacle only (controls ordered separate) 14 PER5 Five-pin receptacle only (controls ordered separate) 14, 19 PER7 Seven-pin receptacle only (controls ordered separate) 14, 19 FAO Field adjustable output 15, 19 BL30 Bi-level switched dimming, 30% 16, 19 BL50 Bi-level switched dimming, 50% 16, 19 DMG 0-10v dimming wires pulled outside fixture (for use with an external control, ordered separately) 17 Shipped installed HS Houseside shield (black finish standard) 20 L90 Left rotated optics 1 R90 Right rotated optics 1 CCE Coastal Construction 21 HA 50°C ambient operation 22 BAA Buy America(n) Act Compliant SF Single fuse (120, 277, 347V) 24 DF Double fuse (208, 240, 480V) 24 Shipped separately EGSR External Glare Shield (reversible, field install required, matches housing finish) BSDB Bird Spikes (field install required) DDBXD Dark Bronze DBLXD Black DNAXD Natural Aluminum DWHXD White DDBTXD Textured dark bronze DBLBXD Textured black DNATXD Textured natural aluminum DWHGXD Textured white L H1 W H2 L H1 W H2 Items marked by a shaded background qualify for the Design Select program and ship in 15 days or less. To learn more about Design Select, visit www.acuitybrands.com/designselect. *See ordering tree for detailsDesign Select options indicated by this color background. One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com © 2011-2024 Acuity Brands Lighting, Inc. All rights reserved. DSX0-LED Rev. 03/26/24 Page 2 of 9 COMMERCIAL OUTDOOR 1.750" for aluminum poles 2.750" - for other poles type Drilling Ordering Information Accessories Ordered and shipped separately. DLL127F 1.5 JU Photocell - SSL twist-lock (120-277V) 23 DLL347F 1.5 CUL JU Photocell - SSL twist-lock (347V) 23 DLL480F 1.5 CUL JU Photocell - SSL twist-lock (480V) 23 DSHORT SBK Shorting cap 23 DSX0HS P#House-side shield (enter package number P1-7, P10-13 in place of #) DSXRPA (FINISH) Round pole adapter (#8 drilling, specify finish) DSXRPA5 (FINISH) Round pole adapter #5 drilling (specify finish) DSXSPA5 (FINISH) Square pole adapter #5 drilling (specify finish) DSX0EGSR (FINISH) External glare shield (specify finish) DSX0BSDB (FINISH) Bird spike deterrent bracket (specify finish) Shield Accessories NOTES 1 Rotated optics available with packages P10, P11, P12 and P13. Must be combined with option L90 or R90. 2 30K, 40K, and 50K available in 70CRI and 80CRI. 27K and 35K only available with 80CRI. Contact Technical Support for other possible combinations. 3 T3LG, T4LG, BLC3, BLC4, LCCO, RCCO not available with option HS. 4 MVOLT driver operates on any line voltage from 120-277V (50/60 Hz). 5 HVOLT driver operates on any line voltage from 347-480V (50/60 Hz). 6 HVOLT not available with package P1, P2 and P10 when combined with option NLTAIR2 PIRHN or option PIR. 7 XVOLT operates with any voltage between 277V and 480V (50/60 Hz). 8 XVOLT not available in packages P1, P2 or P10. XVOLT not available with fusing (SF or DF). 9 SPA5 and RPA5 for use with #5 drilling only (Not for use with #8 drilling). 10 WBA cannot be combined with Type 5 distributions plus photocell (PER). 11 NLTAIR2 and PIRHN must be ordered together. For more information on nLight Air 2. 12 NLTAIR2 PIRHN not available with other controls including PIR, PER, PER5, PER7, FAO, BL30, BL50 and DMG. NLTAIR2 PIRHN not available with P1, P2 and P10 using HVOLT. NLTAIR2 PIRHN not available with P1, P2 and P10 using XVOLT. NLTAIR2 PIRHN not available with P1 using MVOLT. 13 PIR not available with NLTAIR2, PER, PER5, PER7, FAO BL30, BL50 and DMG. PIR not available with P1, P2 and P10 using HVOLT. PIR not available with P1, P2 and P10 using XVOLT. PIR not available with P1 using MVOLT. 14 PER/PER5/PER7 not available with NLTAIR2, PIR, BL30, BL50. Photocell ordered and shipped as a separate line item from Acuity Brands Controls. See accessories. Shorting Cap included. 15 FAO not available with other dimming control options NLTAIR2 PIRHN, PIR, PER5, PER7, BL30, BL50, or DMG. 16 BL30 and BL50 are not available with NLTAIR2 PIRHN, PIR, PER, PER5, PER7, FAO and DMG. BL30 or BL50 must specify 120, 277 or 347V. Consult tech support for 208, 240 or 480V. 17 DMG not available with NLTAIR2 PIRHN, PIR, PER, PER5, PER7, BL30, BL50 and FAO. 18 Reference Motion Sensor Default Settings table on page 4 to see functionality. 19 Reference Controls Options table on page 4. 20 Option HS not available with T3LG, T4LG, BLC3, BLC4, LCCO and RCCO distribution. Also available as a separate accessory; see Accessories information. 21 CCE option not available with option BS and EGSR. Contact Technical Support for availability. 22 Option HA not available with performance packages P6, P7, P12 and P13. 23 Requires luminaire to be specified with PER, PER5 or PER7 option. See Controls Table on page 4. 24 Single fuse (SF) requires 120V, 277V, or 347V. Double fuse (DF) requires 208V, 240V or 480V. XVOLT not available with fusing (SF or DF). Top of Pole 0.563" 1.325"0.400"(2 PLCS) Template #8 A Handhole B C D HANDHOLE ORIENTATION (from top of pole) 2.650" Tenon Mounting Slipfitter Tenon O.D. Mounting Single Unit 2 @ 180 2 @ 90 3 @ 90 3 @120 4 @ 90 2-3/8"RPA AS3-5 190 AS3-5 280 AS3-5 290 AS3-5 390 AS3-5 320 AS3-5 490 2-7/8"RPA AST25-190 AST25-280 AST25-290 AST25-390 AST25-320 AST25-490 4"RPA AST35-190 AST35-280 AST35-290 AST35-390 AST35-320 AST35-490 External Glare Shield (EGSR)House Side Shield (HS) Fixture Quantity & Mounting Configuration Single DM19 2 @ 180 DM28 2 @ 90 DM29 3 @ 90 DM39 3 @ 120 DM32 4 @ 90 DM49 Mounting Type DSX0 with SPA 0.44 0.88 0.96 1.18 ---1.16 DSX0 with SPA5, SPA8N 0.51 1.02 1.06 1.26 ---1.29 DSX0 with RPA, RPA5 0.51 1.02 1.06 1.26 1.24 1.29 DSX0 with MA 0.64 1.28 1.24 1.67 1.70 1.93 DSX0 Area Luminaire - EPA *Includes luminaire and integral mounting arm. Other tenons, arms, brackets or other accessories are not included in this EPA data. Minimum Acceptable Outside Pole Dimension SPA #8 3.5"3.5"3.5"3.5"3.5" RPA #8 3" 3" 3"3"3" 3" SPA5 #5 3" 3" 3"3"3" RPA5 #5 3" 3"3"3"3"3" SPA8N #8 3"3"3"3"3" Mounting Option Drilling Template Single 2 @ 180 2 @ 90 3 @ 90 3 @ 120 4 @ 90 Head Location Side B Side B & D Side B & C Side B, C & D Round Pole Only Side A, B, C & D Drill Nomenclature #8 DM19AS DM28AS DM29AS DM39AS DM32AS DM49AS One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com © 2011-2024 Acuity Brands Lighting, Inc. All rights reserved. DSX0-LED Rev. 03/26/24 Page 3 of 9 COMMERCIAL OUTDOOR To see complete photometric reports or download .ies files for this product, visit Lithonia Lighting’s homepage. Photometric Diagrams Isofootcandle plots for the DSX0 LED P7 40K 70CRI. Distances are in units of mounting height (20'). LEGEND 0.1 fc 0.5 fc 1.0 fc T1S T2M T3M 4 3 2 1 0 -4 -3 -2 -1 4 3 2 1 0 4321 T3LG T4M TFTM T4LG T5M T5W T5LG AFR BLC3 BLC4 LCCO RCCO 4 3 2 1 0 432165 65 4 3 2 1 0 -4 -3 -2 -1 5 6 -5 -6 4 3 2 1 0 432165 65 4 3 2 1 0 -4 -3 -2 -1 5 6 -5 -6 4 3 2 1 0 432165 65 4 3 2 1 0 -4 -3 -2 -1 5 6 -5 -6 4 3 2 1 0 432165 65 4 3 2 1 0 -4 -3 -2 -1 5 6 -5 -6 4 3 2 1 0 432165 65 4 3 2 1 0 -4 -3 -2 -1 5 6 -5 -6 4 3 2 1 0 432165 65 4 3 2 1 0 -4 -3 -2 -1 5 6 -5 -6 4 3 2 1 0 432165 65 4 3 2 1 0 -4 -3 -2 -1 5 6 -5 -6 4 3 2 1 0 432165 65 4 3 2 1 0 -4 -3 -2 -1 5 6 -5 -6 4 3 2 1 0 432165 65 4 3 2 1 0 -4 -3 -2 -1 5 6 -5 -6 4 3 2 1 0 432165 65 4 3 2 1 0 -4 -3 -2 -1 5 6 -5 -6 4 3 2 1 0 432165 65 4 3 2 1 0 -4 -3 -2 -1 5 6 -5 -6 4 3 2 1 0 432165 65 4 3 2 1 0 -4 -3 -2 -1 5 6 -5 -6 4 3 2 1 0 432165 65 4 3 2 1 0 -4 -3 -2 -1 5 6 -5 -6 4 3 2 1 0 432165 65 4 3 2 1 0 -4 -3 -2 -1 5 6 -5 -6 4 3 2 1 0 432165 65 4 3 2 1 0 -4 -3 -2 -1 5 6 -5 -6 One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com © 2011-2024 Acuity Brands Lighting, Inc. All rights reserved. DSX0-LED Rev. 03/26/24 Page 4 of 9 COMMERCIAL OUTDOOR Performance Data Current (A) Performance Package LED Count Drive Current (mA)Wattage 120V 208V 240V 277V 347V 480V Forward Optics (Non-Rotated) P1 20 530 34 0.28 0.16 0.14 0.12 0.10 0.07 P2 20 700 45 0.38 0.22 0.19 0.16 0.13 0.09 P3 20 1050 69 0.57 0.33 0.29 0.25 0.20 0.14 P4 20 1400 94 0.78 0.45 0.39 0.34 0.27 0.19 P5 40 700 89 0.75 0.43 0.38 0.33 0.26 0.19 P6 40 1050 136 1.14 0.66 0.57 0.49 0.39 0.29 P7 40 1300 170 1.42 0.82 0.71 0.62 0.49 0.36 Rotated Optics (Requires L90 or R90) P10 30 530 51 0.42 0.24 0.21 0.18 0.15 0.11 P11 30 700 67 0.57 0.33 0.28 0.25 0.20 0.14 P12 30 1050 103 0.86 0.50 0.43 0.37 0.30 0.22 P13 30 1300 129 1.07 0.62 0.54 0.46 0.37 0.27 Electrical Load Motion Sensor Default Settings Option Unoccupied Dimmed Level High Level (when occupied)Phototcell Operation Dwell Time Ramp-up Time Dimming Fade Rate PIR 30%100%Enabled @ 2FC 7.5 min 3 sec 5 min NLTAIR2 PIRHN 30%100%Enabled @ 2FC 7.5 min 3 sec 5 min Controls Options Nomenclature Description Functionality Primary control device Notes FAO Field adjustable output device installed inside the luminaire; wired to the driver dimming leads. Allows the luminaire to be manually dimmed, effectively trimming the light output. FAO device Cannot be used with other controls options that need the 0-10V leads DS (not available on DSX0)Drivers wired independently for 50/50 luminaire operation The luminaire is wired to two separate circuits, allowing for 50/50 operation. Independently wired drivers Requires two separately switched circuits. Consider nLight AIR as a more cost effective alternative. PER5 or PER7 Twist-lock photocell receptacle Compatible with standard twist-lock photocells for dusk to dawn operation, or advanced control nodes that provide 0-10V dimming signals. Twist-lock photocells such as DLL Elite or advanced control nodes such as ROAM. Pins 4 & 5 to dimming leads on driver, Pins 6 & 7 are capped inside luminaire. Cannot be used with other controls options that need the 0-10V leads. PIR Motion sensor with integral photocell. Sensor suitable for 8' to 40' mounting height. Luminaires dim when no occupancy is detected.Acuity Controls rSBG Cannot be used with other controls options that need the 0-10V leads. NLTAIR2 PIRHN nLight AIR enabled luminaire for motion sensing, photocell and wireless communication. Motion and ambient light sensing with group response. Scheduled dimming with motion sensor over-ride when wirelessly connected to the nLight Eclypse. nLight Air rSBG nLight AIR sensors can be programmed and commissioned from the ground using the ClAIRity Pro app. Cannot be used with other controls options that need the 0-10V leads. BL30 or BL50 Integrated bi-level device that allows a second control circuit to switch all light engines to either 30% or 50% light output BLC device provides input to 0-10V dimming leads on all drivers providing either 100% or dimmed (30% or 50%) control by a secondary circuit BLC UVOLT1 BLC device is powered off the 0-10V dimming leads, thus can be used with any input voltage from 120 to 480V Lumen Ambient Temperature (LAT) Multipliers Use these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F). Ambient Lumen Multiplier 0°C 32°F 1.04 5°C 41°F 1.04 10°C 50°F 1.03 15°C 50°F 1.02 20°C 68°F 1.01 25°C 77°C 1.00 30°C 86°F 0.99 35°C 95°F 0.98 40°C 104°F 0.97 Projected LED Lumen Maintenance Data references the extrapolated performance projections for the platforms noted in a 25°C ambient, based on 10,000 hours of LED testing (tested per IESNA LM-80-08 and projected per IESNA TM-21-11). To calculate LLF, use the lumen maintenance factor that corresponds to the desired number of operating hours below. For other lumen maintenance values, contact factory. Operating Hours Lumen Maintenance Factor 0 1.00 25,000 0.94 50,000 0.89 100,000 0.80 70 CRI 80CRI 90CRI Lumen Multiplier Availability Lumen Multiplier Availability Lumen Multiplier Availability 5000K 102%Standard 92%Extended lead-time 71%(see note) 4000K 100%Standard 92%Extended lead-time 67%(see note) 3500K 100%(see note)90%Extended lead-time 63%(see note) 3000K 96%Standard 87%Extended lead-time 61%(see note) 2700K 94%(see note)85%Extended lead-time 57%(see note) LED Color Temperature / Color Rendering Multipliers Note: Some LED types are available as per special request. Contact Technical Support for more information. *Note: Calculated values are based on original performance package data. When calculating new values for given FAO position, use published values for each package based on input watts and lumens by optic type. FAO Position % Wattage % Lumen Output 8 100%100% 7 93%95% 6 80%85% 5 66%73% 4 54%61% 3 41%49% 2 29%36% 1 15%20% FAO Dimming Settings One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com © 2011-2024 Acuity Brands Lighting, Inc. All rights reserved. DSX0-LED Rev. 03/26/24 Page 5 of 9 COMMERCIAL OUTDOOR Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of configurations shown within the tolerances described within LM-79. Contact factory for performance data on any configurations not shown here. Forward Optics Performance Package System Watts LED Count Drive Current (mA)Distribution Type 30K 40K 50K (3000K, 70 CRI)(4000K, 70 CRI)(5000K, 70 CRI) Lumens B U G LPW Lumens B U G LPW Lumens B U G LPW P1 33W 20 530 T1S 4,906 1 0 1 148 5,113 1 0 1 154 5,213 1 0 1 157 T2M 4,545 1 0 2 137 4,736 1 0 2 143 4,829 1 0 2 145 T3M 4,597 1 0 2 138 4,791 1 0 2 144 4,885 1 0 2 147 T3LG 4,107 1 0 1 124 4,280 1 0 1 129 4,363 1 0 1 131 T4M 4,666 1 0 2 141 4,863 1 0 2 146 4,957 1 0 2 149 T4LG 4,244 1 0 1 128 4,423 1 0 1 133 4,509 1 0 1 136 TFTM 4,698 1 0 2 141 4,896 1 0 2 147 4,992 1 0 2 150 T5M 4,801 3 0 1 145 5,003 3 0 1 151 5,101 3 0 1 154 T5W 4,878 3 0 1 147 5,084 3 0 2 153 5,183 3 0 2 156 T5LG 4,814 2 0 1 145 5,018 2 0 1 151 5,115 2 0 1 154 BLC3 3,344 0 0 1 101 3,485 0 0 1 105 3,553 0 0 1 107 BLC4 3,454 0 0 2 104 3,599 0 0 2 108 3,670 0 0 2 111 RCCO 3,374 0 0 1 102 3,517 0 0 1 106 3,585 0 0 1 108 LCCO 3,374 0 0 1 102 3,517 0 0 1 106 3,585 0 0 1 108 AFR 4,906 1 0 1 148 5,113 1 0 1 154 5,213 1 0 1 157 P2 45W 20 700 T1S 6,328 1 0 1 140 6,595 1 0 1 146 6,724 1 0 1 149 T2M 5,862 1 0 2 130 6,109 1 0 2 135 6,228 1 0 2 138 T3M 5,930 1 0 3 131 6,180 1 0 3 137 6,301 1 0 3 140 T3LG 5,297 1 0 1 117 5,521 1 0 1 122 5,628 1 0 1 125 T4M 6,018 1 0 3 133 6,272 1 0 3 139 6,395 1 0 3 142 T4LG 5,474 1 0 1 121 5,705 1 0 1 126 5,816 1 0 1 129 TFTM 6,060 1 0 3 134 6,316 1 0 3 140 6,439 1 0 3 143 T5M 6,192 3 0 1 137 6,453 3 0 2 143 6,579 3 0 2 146 T5W 6,293 3 0 2 139 6,558 3 0 2 145 6,686 3 0 2 148 T5LG 6,210 2 0 1 138 6,472 3 0 1 143 6,598 3 0 1 146 BLC3 4,313 0 0 2 96 4,495 0 0 2 100 4,583 0 0 2 102 BLC4 4,455 0 0 2 99 4,643 0 0 2 103 4,733 0 0 2 105 RCCO 4,352 0 0 2 96 4,536 0 0 2 100 4,624 0 0 2 102 LCCO 4,352 0 0 2 96 4,536 0 0 2 100 4,624 0 0 2 102 AFR 6,328 1 0 1 140 6,595 1 0 1 146 6,724 1 0 1 149 P3 69W 20 1050 T1S 9,006 1 0 2 131 9,386 1 0 2 136 9,569 1 0 2 139 T2M 8,343 2 0 3 121 8,694 2 0 3 126 8,864 2 0 3 129 T3M 8,439 2 0 3 122 8,795 2 0 3 128 8,967 2 0 3 130 T3LG 7,539 1 0 2 109 7,857 1 0 2 114 8,010 1 0 2 116 T4M 8,565 2 0 3 124 8,926 2 0 3 129 9,100 2 0 3 132 T4LG 7,790 1 0 2 113 8,119 1 0 2 118 8,277 1 0 2 120 TFTM 8,624 1 0 3 125 8,988 1 0 3 130 9,163 2 0 3 133 T5M 8,812 3 0 2 128 9,184 4 0 2 133 9,363 4 0 2 136 T5W 8,955 4 0 2 130 9,333 4 0 2 135 9,515 4 0 2 138 T5LG 8,838 3 0 1 128 9,211 3 0 1 134 9,390 3 0 1 136 BLC3 6,139 0 0 2 89 6,398 0 0 2 93 6,522 0 0 2 95 BLC4 6,340 0 0 3 92 6,607 0 0 3 96 6,736 0 0 3 98 RCCO 6,194 1 0 2 90 6,455 1 0 2 94 6,581 1 0 2 95 LCCO 6,194 1 0 2 90 6,455 1 0 2 94 6,581 1 0 2 95 AFR 9,006 1 0 2 131 9,386 1 0 2 136 9,569 1 0 2 139 P4 93W 20 1400 T1S 11,396 1 0 2 122 11,877 1 0 2 128 12,109 2 0 2 130 T2M 10,557 2 0 3 113 11,003 2 0 3 118 11,217 2 0 3 121 T3M 10,680 2 0 3 115 11,130 2 0 3 120 11,347 2 0 3 122 T3LG 9,540 1 0 2 103 9,942 1 0 2 107 10,136 1 0 2 109 T4M 10,839 2 0 3 117 11,296 2 0 3 121 11,516 2 0 4 124 T4LG 9,858 1 0 2 106 10,274 1 0 2 110 10,474 1 0 2 113 TFTM 10,914 2 0 3 117 11,374 2 0 3 122 11,596 2 0 3 125 T5M 11,152 4 0 2 120 11,622 4 0 2 125 11,849 4 0 2 127 T5W 11,332 4 0 3 122 11,811 4 0 3 127 12,041 4 0 3 129 T5LG 11,184 3 0 1 120 11,656 3 0 2 125 11,883 3 0 2 128 BLC3 7,768 0 0 2 83 8,096 0 0 2 87 8,254 0 0 2 89 BLC4 8,023 0 0 3 86 8,362 0 0 3 90 8,524 0 0 3 92 RCCO 7,838 1 0 2 84 8,169 1 0 2 88 8,328 1 0 2 90 LCCO 7,838 1 0 2 84 8,169 1 0 2 88 8,328 1 0 2 90 AFR 11,396 1 0 2 122 11,877 1 0 2 128 12,109 2 0 2 130 Performance Data Lumen Output One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com © 2011-2024 Acuity Brands Lighting, Inc. All rights reserved. DSX0-LED Rev. 03/26/24 Page 6 of 9 COMMERCIAL OUTDOOR Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of configurations shown within the tolerances described within LM-79. Contact factory for performance data on any configurations not shown here. Forward Optics Performance Package System Watts LED Count Drive Current (mA)Distribution Type 30K 40K 50K (3000K, 70 CRI)(4000K, 70 CRI)(5000K, 70 CRI) Lumens B U G LPW Lumens B U G LPW Lumens B U G LPW P5 90W 40 700 T1S 12,380 2 0 2 137 12,902 2 0 2 143 13,154 2 0 2 146 T2M 11,468 2 0 3 127 11,952 2 0 3 133 12,185 2 0 3 135 T3M 11,601 2 0 3 129 12,091 2 0 3 134 12,326 2 0 4 137 T3LG 10,363 2 0 2 115 10,800 2 0 2 120 11,011 2 0 2 122 T4M 11,774 2 0 4 131 12,271 2 0 4 136 12,510 2 0 4 139 T4LG 10,709 1 0 2 119 11,160 2 0 2 124 11,378 2 0 2 126 TFTM 11,856 2 0 3 132 12,356 2 0 4 137 12,596 2 0 4 140 T5M 12,114 4 0 2 134 12,625 4 0 2 140 12,871 4 0 2 143 T5W 12,310 4 0 3 137 12,830 4 0 3 142 13,080 4 0 3 145 T5LG 12,149 3 0 2 135 12,662 3 0 2 141 12,908 3 0 2 143 BLC3 8,438 0 0 2 94 8,794 0 0 2 98 8,966 0 0 2 99 BLC4 8,715 0 0 3 97 9,083 0 0 3 101 9,260 0 0 3 103 RCCO 8,515 1 0 2 94 8,874 1 0 2 98 9,047 1 0 2 100 LCCO 8,515 1 0 2 94 8,874 1 0 2 98 9,047 1 0 2 100 AFR 12,380 2 0 2 137 12,902 2 0 2 143 13,154 2 0 2 146 P6 137W 40 1050 T1S 17,545 2 0 3 128 18,285 2 0 3 133 18,642 2 0 3 136 T2M 16,253 3 0 4 119 16,939 3 0 4 124 17,269 3 0 4 126 T3M 16,442 2 0 4 120 17,135 3 0 4 125 17,469 3 0 4 128 T3LG 14,687 2 0 2 107 15,306 2 0 2 112 15,605 2 0 2 114 T4M 16,687 2 0 4 122 17,391 3 0 5 127 17,730 3 0 5 129 T4LG 15,177 2 0 2 111 15,817 2 0 2 115 16,125 2 0 2 118 TFTM 16,802 2 0 4 123 17,511 2 0 4 128 17,852 2 0 5 130 T5M 17,168 4 0 2 125 17,893 5 0 3 131 18,241 5 0 3 133 T5W 17,447 5 0 3 127 18,183 5 0 3 133 18,537 5 0 3 135 T5LG 17,218 4 0 2 126 17,944 4 0 2 131 18,294 4 0 2 134 BLC3 11,959 0 0 3 87 12,464 0 0 3 91 12,707 0 0 3 93 BLC4 12,352 0 0 4 90 12,873 0 0 4 94 13,124 0 0 4 96 RCCO 12,067 1 0 3 88 12,576 1 0 3 92 12,821 1 0 3 94 LCCO 12,067 1 0 3 88 12,576 1 0 3 92 12,821 1 0 3 94 AFR 17,545 2 0 3 128 18,285 2 0 3 133 18,642 2 0 3 136 P7 171W 40 1300 T1S 20,806 2 0 3 122 21,683 2 0 3 127 22,106 2 0 3 129 T2M 19,273 3 0 4 113 20,086 3 0 4 118 20,478 3 0 4 120 T3M 19,497 3 0 5 114 20,319 3 0 5 119 20,715 3 0 5 121 T3LG 17,416 2 0 2 102 18,151 2 0 2 106 18,504 2 0 2 108 T4M 19,787 3 0 5 116 20,622 3 0 5 121 21,024 3 0 5 123 T4LG 17,997 2 0 2 105 18,756 2 0 2 110 19,121 2 0 2 112 TFTM 19,924 3 0 5 117 20,765 3 0 5 122 21,170 3 0 5 124 T5M 20,359 5 0 3 119 21,217 5 0 3 124 21,631 5 0 3 127 T5W 20,689 5 0 3 121 21,561 5 0 3 126 21,982 5 0 3 129 T5LG 20,418 4 0 2 120 21,279 4 0 2 125 21,694 4 0 2 127 BLC3 14,182 0 0 3 83 14,780 0 0 3 87 15,068 0 0 3 88 BLC4 14,647 0 0 4 86 15,265 0 0 4 89 15,562 0 0 4 91 RCCO 14,309 1 0 3 84 14,913 1 0 3 87 15,204 1 0 3 89 LCCO 14,309 1 0 3 84 14,913 1 0 3 87 15,204 1 0 3 89 AFR 20,806 2 0 3 122 21,683 2 0 3 127 22,106 2 0 3 129 Lumen Output Performance Data One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com © 2011-2024 Acuity Brands Lighting, Inc. All rights reserved. DSX0-LED Rev. 03/26/24 Page 7 of 9 COMMERCIAL OUTDOOR Performance Data Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of configurations shown within the tolerances described within LM-79. Contact factory for performance data on any configurations not shown here. Rotated Optics Performance Package System Watts LED Count Drive Current (mA)Distribution Type 30K 40K 50K (3000K, 70 CRI)(4000K, 70 CRI)(5000K, 70 CRI) Lumens B U G LPW Lumens B U G LPW Lumens B U G LPW P10 51W 30 530 T1S 7,399 3 0 3 145 7,711 3 0 3 151 7,862 3 0 3 154 T2M 6,854 3 0 3 135 7,144 3 0 3 140 7,283 3 0 3 143 T3M 6,933 3 0 3 136 7,225 3 0 3 142 7,366 3 0 3 145 T3LG 6,194 2 0 2 122 6,455 2 0 2 127 6,581 2 0 2 129 T4M 7,036 3 0 3 138 7,333 3 0 3 144 7,476 3 0 3 147 T4LG 6,399 2 0 2 126 6,669 2 0 2 131 6,799 2 0 2 134 TFTM 7,086 3 0 3 139 7,385 3 0 3 145 7,529 3 0 3 148 T5M 7,239 3 0 2 142 7,545 3 0 2 148 7,692 3 0 2 151 T5W 7,357 3 0 2 145 7,667 3 0 2 151 7,816 4 0 2 154 T5LG 7,260 3 0 1 143 7,567 3 0 1 149 7,714 3 0 1 152 BLC3 5,043 3 0 3 99 5,256 3 0 3 103 5,358 3 0 3 105 BLC4 5,208 3 0 3 102 5,428 3 0 3 107 5,534 3 0 3 109 RCCO 5,089 0 0 2 100 5,303 0 0 2 104 5,407 0 0 2 106 LCCO 5,089 0 0 2 100 5,303 0 0 2 104 5,407 0 0 2 106 AFR 7,399 3 0 3 145 7,711 3 0 3 151 7,862 3 0 3 154 P11 68W 30 700 T1S 9,358 3 0 3 138 9,753 3 0 3 143 9,943 3 0 3 146 T2M 8,669 3 0 3 127 9,034 3 0 3 133 9,211 3 0 3 135 T3M 8,768 3 0 3 129 9,138 3 0 3 134 9,316 3 0 3 137 T3LG 7,833 3 0 3 115 8,164 3 0 3 120 8,323 3 0 3 122 T4M 8,899 3 0 3 131 9,274 3 0 3 136 9,455 3 0 3 139 T4LG 8,093 3 0 3 119 8,435 3 0 3 124 8,599 3 0 3 126 TFTM 8,962 3 0 3 132 9,340 3 0 3 137 9,522 3 0 3 140 T5M 9,156 4 0 2 135 9,542 4 0 2 140 9,728 4 0 2 143 T5W 9,304 4 0 2 137 9,696 4 0 2 143 9,885 4 0 2 145 T5LG 9,182 3 0 1 135 9,569 3 0 1 141 9,756 3 0 1 143 BLC3 6,378 3 0 3 94 6,647 3 0 3 98 6,777 3 0 3 100 BLC4 6,587 3 0 3 97 6,865 3 0 3 101 6,999 3 0 3 103 RCCO 6,436 0 0 2 95 6,707 0 0 2 99 6,838 0 0 2 101 LCCO 6,436 0 0 2 95 6,707 0 0 2 99 6,838 0 0 2 101 AFR 9,358 3 0 3 138 9,753 3 0 3 143 9,943 3 0 3 146 P12 103W 30 1050 T1S 13,247 3 0 3 128 13,806 3 0 3 134 14,075 3 0 3 136 T2M 12,271 4 0 4 119 12,789 4 0 4 124 13,038 4 0 4 126 T3M 12,412 4 0 4 120 12,935 4 0 4 125 13,187 4 0 4 128 T3LG 11,089 3 0 3 107 11,556 3 0 3 112 11,782 3 0 3 114 T4M 12,597 4 0 4 122 13,128 4 0 4 127 13,384 4 0 4 129 T4LG 11,457 3 0 3 111 11,940 3 0 3 116 12,173 3 0 3 118 TFTM 12,686 4 0 4 123 13,221 4 0 4 128 13,479 4 0 4 130 T5M 12,960 4 0 2 125 13,507 4 0 2 131 13,770 4 0 2 133 T5W 13,170 4 0 3 127 13,726 4 0 3 133 13,994 4 0 3 135 T5LG 12,998 3 0 2 126 13,546 3 0 2 131 13,810 3 0 2 134 BLC3 9,029 3 0 3 87 9,409 3 0 3 91 9,593 3 0 3 93 BLC4 9,324 4 0 4 90 9,718 4 0 4 94 9,907 4 0 4 96 RCCO 9,110 1 0 2 88 9,495 1 0 2 92 9,680 1 0 2 94 LCCO 9,110 1 0 2 88 9,494 1 0 2 92 9,680 1 0 2 94 AFR 13,247 3 0 3 128 13,806 3 0 3 134 14,075 3 0 3 136 P13 129W 30 1300 T1S 15,704 3 0 3 122 16,366 3 0 3 127 16,685 4 0 4 130 T2M 14,547 4 0 4 113 15,161 4 0 4 118 15,457 4 0 4 120 T3M 14,714 4 0 4 114 15,335 4 0 4 119 15,634 4 0 4 121 T3LG 13,145 3 0 3 102 13,700 3 0 3 106 13,967 3 0 3 108 T4M 14,933 4 0 4 116 15,563 4 0 4 121 15,867 4 0 4 123 T4LG 13,582 3 0 3 105 14,155 3 0 3 110 14,431 3 0 3 112 TFTM 15,039 4 0 4 117 15,673 4 0 4 122 15,979 4 0 4 124 T5M 15,364 4 0 2 119 16,013 4 0 2 124 16,325 4 0 2 127 T5W 15,613 5 0 3 121 16,272 5 0 3 126 16,589 5 0 3 129 T5LG 15,409 3 0 2 120 16,059 3 0 2 125 16,372 4 0 2 127 BLC3 10,703 4 0 4 83 11,155 4 0 4 87 11,372 4 0 4 88 BLC4 11,054 4 0 4 86 11,520 4 0 4 89 11,745 4 0 4 91 RCCO 10,800 1 0 2 84 11,256 1 0 2 87 11,475 1 0 3 89 LCCO 10,800 1 0 2 84 11,255 1 0 2 87 11,475 1 0 3 89 AFR 15,704 3 0 3 122 16,366 3 0 3 127 16,685 4 0 4 130 Lumen Output One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com © 2011-2024 Acuity Brands Lighting, Inc. All rights reserved. DSX0-LED Rev. 03/26/24 Page 8 of 9 COMMERCIAL OUTDOOR 27.70" 2.26" 14.06" 7.80" 28.00" 2.26" 14.06" 8.90" 32.17" 2.26" 14.06" 7.59" DSX0 with RPA, RPA5, SPA5, SPA8N mount Weight: 25 lbs Dimensions 2.41" 3.16" SPA (STANDARD ARM) 2.41"3.16" RPA 2.41" 3.16" SPA8N 4.25" RPA5 4.25" SPA5 DSX0 with WBA mount Weight: 27 lb DSX0 with MA mount Weight: 28 lbs One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com © 2011-2024 Acuity Brands Lighting, Inc. All rights reserved. DSX0-LED Rev. 03/26/24 Page 9 of 9 COMMERCIAL OUTDOOR nLight Control - Sensor Coverage and Settings nLight Sensor Coverage Pattern NLTAIR2 PIRHN Top Side FEATURES & SPECIFICATIONS INTENDED USE The sleek design of the D-Series Size 0 reflects the embedded high performance LED technology. It is ideal for many commercial and municipal applications, such as parking lots, plazas, campuses, and pedestrian areas. CONSTRUCTION Single-piece die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. Modular design allows for ease of maintenance and future light engine upgrades. The LED driver is mounted in direct contact with the casting to promote low operating temperature and long life. Housing driver compartment is completely sealed against moisture and environmental contaminants (IP66). Vibration rated per ANSI C136.31 for 3G. Low EPA (0.44 ft2) for optimized pole wind loading. FINISH Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling. Available in both textured and non-textured finishes. COASTAL CONSTRUCTION (CCE) Optional corrosion resistant construction is engineered with added corrosion protection in materials and/or pre-treatment of base material under super durable paint. Provides additional corrosion protection for applications near coastal areas. Finish is salt spray tested to over 5,000 hours per ASTM B117 with scribe rating of 10. Additional lead-times may apply. OPTICS Precision-molded proprietary silicone lenses are engineered for superior area lighting distribution, uniformity, and pole spacing. Light engines are available in 3000 K, 4000 K or 5000 K (70 CRI) configurations. 80CRI configurations are also available. The D-Series Size 0 has zero uplight and qualifies as a Nighttime Friendly™ product, meaning it is consistent with the LEED® and Green Globes™ criteria for eliminating wasteful uplight. ELECTRICAL Light engine(s) configurations consist of high-efficacy LEDs mounted to metal- core circuit boards to maximize heat dissipation and promote long life (up to L80/100,000 hours at 25°C). Class 1 electronic drivers are designed to have a power factor >90%, THD <20%, and an expected life of 100,000 hours with <1% failure rate. Easily serviceable 10kV surge protection device meets a minimum Category C Low operation (per ANSI/IEEE C62.41.2). STANDARD CONTROLS The DSX0 LED area luminaire has a number of control options. DSX Size 0, comes standard with 0-10V dimming driver. Dusk to dawn controls can be utilized via optional NEMA twist-lock photocell receptacles. PIR integrated motion sensor with on-board photocell feature field-adjustable programing and are suitable for mounting heights up to 40 feet. Control option BL features a bi-level device that allows a second control circuit to switch all light engines to either 30% or 50% light output. nLIGHT AIR CONTROLS The DSX0 LED area luminaire is also available with nLight® AIR for the ultimate in wireless control. This powerful controls platform provides out-of-the-box basic motion sensing and photocontrol functionality and is suitable for mounting heights up to 40 feet. Once commissioned using a smartphone and the easy-to- use CLAIRITY app, nLight AIR equipped luminaries can be grouped, resulting in motion sensor and photocell group response without the need for additional equipment. Scheduled dimming with motion sensor over-ride can be achieved when used with the nLight Eclypse. Additional information about nLight Air can be found here. INSTALLATION Integral mounting arm allows for fast mounting using Lithonia standard #8 drilling and accommodates pole drilling's from 2.41 to 3.12" on center. The standard “SPA” option for square poles and the “RPA” option for round poles use the #8 drilling. For #5 pole drillings, use SPA5 or RPA5. Additional mountings are available including a wall bracket (WBA) and mast arm (MA) option that allows luminaire attachment to a 2 3/8” horizontal mast arm. LISTINGS UL listed to meet U.S. and Canadian standards. UL Listed for wet locations. Light engines are IP66 rated; luminaire is IP66 rated. Rated for -40°C minimum ambient. DesignLights Consortium® (DLC) Premium qualified product and DLC qualified product. Not all versions of this product may be DLC Premium qualified or DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/ QPL to confirm which versions are qualified. International Dark-Sky Association (IDA) Fixture Seal of Approval (FSA) is available for all products on this page utilizing 3000K color temperature only. GOVERNMENT PROCUREMENT BAA – Buy America(n) Act: Product with the BAA option qualifies as a domestic end product under the Buy American Act as implemented in the FAR and DFARS. Product with the BAA option also qualifies as manufactured in the United States under DOT Buy America regulations. BABA – Build America Buy America: Product with the BAA option also qualifies as produced in the United States under the definitions of the Build America, Buy America Act. Please refer to www.acuitybrands.com/buy-american for additional information. WARRANTY 5-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice. Da r l a n a M e d i u m H a n g i n g L a n t e r n De s i g n e r : C h a p m a n & M y e r s It e m # C H O 5 0 8 5 B Z He i g h t : 2 4 . 5 " W i d t h : 1 7 " Ca n o p y : 6 " R o u n d Fi n i s h e s : B Z Gl a s s O p t i o n s : C G So c k e t : 4 - E 1 2 C a n d e l a b r a W a t t a g e : 4 - 6 0 C 1 1 W e i g h t : 2 8 P o u n d s ©E F C D E S I G N S Da r l a n a S m a l l H a n g i n g L a n t e r n De s i g n e r : C h a p m a n & M y e r s It e m # C H O 5 0 8 4 B Z He i g h t : 1 8 . 5 " W i d t h : 1 2 . 5 " Ca n o p y : 6 " R o u n d Fi n i s h e s : B Z Gl a s s O p t i o n s : C G So c k e t : 4 - E 1 2 C a n d e l a b r a W a t t a g e : 4 - 4 0 C 1 1 W e i g h t : 1 9 P o u n d s ©E F C D E S I G N S OL13201ANBZ: Medium Lantern Collection: Wellsworth Supplied with 8-inches of wire Designed with a back plate to allow for easy installation For an eco-friendly lighting design, convert to LED bulbs to offer savings and reduce energy Designed for damp and wet environments allowing for direct water contact 1-year manufacturer warranty UPC #:014817571066 Finish: Antique Bronze (ANBZ) Dimensions: Width:10.5" Height:22.5" Weight:11.44 lbs. Extends:9.125' Wire:8" (color;Black/White) Mounting Proc.:Set Screw(s) Connection:Mounted To Box Bulbs: 3 - Candelabra B10 Torpedo 60.0w Max. 120v Not included Features: Easily converts to LED with optional replacement lamps Meets Title 24 energy efficiency standards Title 24 compliant if used with Joint Appendix (JA8) approved light bulbs listed in the California Energy Commission Appliance database. Material List: 1 Body - Cast Aluminum - Antique Bronze Safety Listing: Safety Listed for Wet Locations Instruction Sheets: Trilingual (English, Spanish, and French) (OL13200-OL13201) Trilingual (English, Spanish, and French) (OL13200-OL13201-OL13202) Shade / Glass / Diffuser Details: Part Material Finish Quantity Item Number Length Width Height Diameter Fitter Diameter Shade Top Length Shade Top Width Shade Top Diameter Panel Glass Clear Seeded 2 7.88 16.5 Panel Glass Clear Seeded 2 6.12 16.5 Backplate / Canopy Details: Type Height / Length Width Depth Diameter Outlet Box Up Outlet Box Down Back Plate 10.5 6.0 1.0 12.12 Shipping Information: Package Type Product #Quantity UPC Length Width Height Cube Weight Frt. Class UPS Ship Individual OL13201ANBZ 1 014817571066 26.0 15.25 13.25 3.04 13.7 0 Yes Master Pack OL13201ANBZ 0 10014817571063 No NJ Pallet 20 48.0 40.0 71.0 78.89 274.0 No NV Pallet 20 48.0 40.0 71.0 78.89 274.0 No Visual Comfort & Co. reserves the right to revise the design of components of any product due to parts availability or change in safety listing standards without assuming any obligation or liability to modify any products previously manufactured and without notice. This literature depicts a product design that is the sole and exclusive property of Visual Comfort & Co.. In compliance with U.S copyright and patent requirements, notification is hereby presented in this form that this literature, or the product it depicts, is not to be copied, altered or used in any manner without the express written consent of, or contrary to the best interests of Visual Comfort & Co. Your Requested Part Numbers Classic Warehouse Shade Gooseneck RLM Item Code: Classic Warehouse Shade Gooseneck RLM Fixture: 14" Shade Finish: Black - Shade White Interior - Wet Rated Gooseneck Arm Option: HL-A, 22" Gooseneck Arm (3/4" NPT) Gooseneck Arm Color: Black - Wet Rated Gooseneck Arm Accessory: None Wire Guard Option: None Glass & Guard Option: None Lamp Selection: LED (Dedicated LED) LED Wattages: 34W LED 4000 LUMENS Color Temp: 3000K Driver: Ballast Mounted in Wall Canopy - Multi-Volt Dusk to Dawn Sensor Option: None SKU: H-15114-91/HL-A-91/34LED430WBCM * This product is made to order and will take between 25 and 30 business days.