HomeMy WebLinkAboutTAC Members Report for Pet AngelPet Angel Memorial Center is in the process of expanding the current business model.
Below is the cremation machine that is being proposed to go into the location at 174 E. Carmel Dr., Carmel,
IN 46032. This machine will go on the north wall of the complex. (See attached below site plan.) In the
back of this complex is a parking lot that backs to a treed lot. Therefore, there is no concern of any residential
or public areas that will be affected.
Pet Angel Memorial Center has grown immensely and is excited to take the business model and the concept to
the next level.
Animal Cremation Unit
For Private Cremations
Model S-27-G-F
Specifically Designed For :
Private Pet Cremation Services
Veterinary Practices
Animal Control Facilities
Humane Societies
Capacity
200 POUNDS (91 KGS)
BATCH LOAD
65 POUNDS (30 KGS) PER HOUR (APX.)
Power Operated Vertical Door
Lined With High Temperature Composite Ceramic Fiber
Easy To Load --- Easy To Operate
23" Load Height Front Ash Removal
22" x 26" Load Opening
No Visible Emission - No Odors
Meets State And Federal Regulations
No Liquid Leakage
Built In Liquid Retention With 3" Slope To Back Of Tile Hearth
Built For Long Life
Constructed Of 3/16" Plate Steel, Lined With 1" 1,900 Insulation
And 3" Heavy Duty Refractory
Pre-piped & Pre-wired And Assembled At Factory
Shipment Of Main Chamber And Secondary Cha
ber Fully Assembled
Therm Tec, Inc. Has Designed, Engineered And
Two Stack Sections Included - Installed At Jobsite
Automatic Temperature Control For Maximum Efficiency
Fuel Saving Feature Of High - Low Control for Secondary Burner
On - Off Control for Primary Burner
Fuel Saving Preheated Air For Primary & Secondary Chambers
CONSTRUCTION S-27-G-F
Dimensions: W x L x H 48" x 90" x 81"
Primary Chamber Volume 27 CFT
Stack Sections, Two Each, 18" x 6'
Flanged Total 12'
10 Gauge With 3" 2,300°F Refractory
Lining
Load Door Lined With Hi-Temp
Composite 6"
Load Door Opening 26" x 22"
Load Door - Outside Dimensions 32" x 35.5"
Ash Removal Drawer 14" x 9.5"
Primary Burner Firing Rate 375,000 BTU Avg.
Secondary Burner Firing Rate 375,000 BTU Avg.
Control Panel, NEMA 12, U.L. #508A Included
Natural Gas/Propane Requirements 800 CFH
Optional #2 Fuel Oil 5.8 GPH
Electrical Requirements 115/60/1 30AMP
Paint & Primer, Hi-Temp 800°F To 1,200°F
Manufactured Equipment For The ANIMAL
CREMATION INDUSTRY Since 1973.
Weight Pounds 6,500