Loading...
HomeMy WebLinkAboutLIGHTPOLESDATE: LOCATION: TYPE: PROJECT: CATALOG #: • Low profile LED area/site luminaire with a variety of IES distributions for lighting applications such as auto dealership, retail, commercial, and campus parking lots • Featuring two different optical technologies, Strike and Micro Strike Optics, which provide the best distribution patterns for retrofit or new construction • Rated for high vibration applications including bridges and overpasses. All sizes are rated for 1.5G • Control options including photo control, occupancy sensing, NX Lighting Controls™, LightGRID+ and 7-Pin with networked controls • New customizable lumen output feature allows for the wattage and lumen output to be customized in the factory to meet whatever specification requirements may entail • Field interchangeable mounting provides additional flexibility after the fixture has shipped IP65 CONSTRUCTION • Die-cast housing with hidden vertical heat fins are optimal for heat dissipation while keeping a clean smooth outer surface • Corrosion resistant, die-cast aluminum housing with 1000 hour powder coat paint finish • External hardware is corrosion resistant OPTICS • Micro Strike Optics (160, 320, 480, or 720 LED counts) maximize uniformity in applications and come standard with mid-power LEDs which evenly illuminate the entire luminous surface area to provide a low glare appearance. Catalog logic found on page 2 • Strike Optics (36, 72, 108, or 162 LED counts) provide best in class distributions and maximum pole spacing in new applications with high powered LEDs. Strike optics are held in place with a polycarbonate bezel to mimic the appearance of the Micro Strike Optics so both solutions can be combined on the same application. Catalog logic found on page 3 • Both optics maximize target zone illumination with minimal losses at the house-side, reducing light trespass issues. Additional backlight control shields and house side shields can be added for further reduction of illumination behind the pole • One-piece silicone gasket ensures a weatherproof seal • Zero up-light at 0 degrees of tilt • Field rotatable optics INSTALLATION • Mounting patterns for each arm can be found on page 11 • Optional universal mounting block for ease of installation during retrofit applications. Available as an option (ASQU) or accessory for square and round poles • All mounting hardware included • Knuckle arm fitter option available for 2-3/8” OD tenon • For products with EPA less than 1 mounted to a pole greater that 20ft, a vibration damper is recommended CERTIFICATIONS • DLC® (DesignLights Consortium Qualified), with some Premium Qualified configurations. Not all product variations listed in this document are DLC® qualified. Refer to http://www.designlights.org for the most up-to-date list. • Listed to UL1598 and CSA C22.2#250.0-24 for wet locations and 40˚C ambient temperatures • 1.5 G rated for ANSI C136.31 high vibration applications • Fixture is IP65 rated • Meets IDA recommendations using 3K CCT configuration at 0 degrees of tilt • This product meets federal procurement law requirements under the Buy American Act (FAR 52.225-9) and Trade Agreements Act (FAR 52.225- 11). See Buy America(n) Solutions (link to https:// www.currentlighting.com/resources/america- solutions). • FCC CFR Title 47 Part 15, Class A WARRANTY • 5 year warranty ELECTRICAL • Universal 120-277 VAC or 347-480 VAC input voltage, 50/60 Hz • Ambient operating temperature -40˚C to 40˚C • Drivers have greater than 90% power factor and less than 20% THD • LED drivers have output power over-voltage, over- current protection and short circuit protection with auto recovery • Field replaceable surge protection device provides 20kA protection meeting ANSI/ IEEE C62.41.2 Category C High and Surge Location Category C3; Automatically takes fixture off-line for protection when device is compromised • Dual Driver option provides 2 drivers within luminaire but only one set of leads exiting the luminaire, where Dual Power Feed provides two drivers which can be wired independently as two sets of leads are extended from the luminaire. Both options cannot be combined CONTROLS • Photo control, occupancy sensor programmable controls, and Zigbee wireless controls available for complete on/off and dimming control • Please consult brand or sales representative when combining control and electrical options as some combinations may not operate as anticipated depending on your application • 7-pin ANSI C136.41-2013 photocontrol receptacle option available for twist lock photocontrols or wireless control modules (control accessories sold separately) • 0-10V Dimming Drivers are standard. • NX Lighting Controls™ available with in fixture wireless control module, features dimming and occupancy sensor • LightGRID+ available with in fixture wireless control module, features dimming and occupancy sensor. Also available in 7-pin configuration OPTICS SERVICE PROGRAMS SIZE 1 SIZE 3 SIZE 2 SIZE 4 EPA VP1 (Size 1) VP2 (Size 2) VP3 (Size 3) VP4 (Size 4) Config. Single Fixture 0.454 0.555 0.655 0.698 Two at 180 0.908 1.110 1.310 1.396 Two at 90 0.583 0.711 0.857 0.948 Three at 90 1.037 1.266 1.512 1.646 Three at 120 0.943 1.155 1.392 1.680 Four at 90 1.166 1.422 1.714 1.896 FEATURES CONTROL TECHNOLOGY SPECIFICATIONS 14.373 5.000 16.756 21.756 3.477 5"16.76" 14.37" 21.76" 3.48" 7.500 16.113 34.476 3.477 26.976 16.11" 26.97" 34.47" 7.5" 16.11" 34.47" 3.48" 5.000 21.877 14.373 26.876 3.477 26.88" 3.48" 5"21.88" 14.37" 19.622 7.500 27.980 35.476 3.477 7.50"27.98" 19.62" 35.48" 3.48" 7.5"27.98" 35.48" 19.62" 26.97" Page 1 of 15 Rev 04/16/25 BEA_VIPERSPEC_R17 VIPER Area/Site VIPER LUMINAIRE currentlighting.com/beacon © 2024-2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. ––– Mounting Color Options Network Control Options A Arm mount for square pole (B3 Drill Pattern) (Does not include round pole adapter) A_Arm mount for round pole 2 ASQU Universal arm mount for square pole. Can be used with B3 or S2 Drill Pattern A_U Universal arm mount for round pole 2 AAU Adjustable arm for pole mounting (universal drill pattern) AA_U Adjustable arm mount for round pole 2 ADU Decorative upswept Arm (universal drill pattern) AD_U Decorative upswept arm mount for round pole 2 MAF Mast arm fitter for 2-3/8" OD horizontal arm K Knuckle T Trunnion WB Wall Bracket, horizontal tenon with MAF WM Wall mount bracket with decorative upswept arm WA Wall mount bracket with adjustable arm BLT Black Matte Textured BLS Black Gloss Smooth DBT Dark Bronze Matte Textured DBS Dark Bronze Gloss Smooth GTT Graphite Matte Textured LGS Light Grey Gloss Smooth LGT Light Grey Gloss Textured PSS Platinum Silver Smooth WHT White Matte Textured WHS White Gloss Smooth VGT Verde Green Textured Color Option CC Custom Color F Fusing 2PF Dual Power Feed 2DR Dual Driver TE Tooless Entry BC Backlight Control 8 TB Terminal Block LS Lumen Switch NXWS-16F NX Networked Wireless Enabled Integral NXSMP2-LMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming 1,3,4 NXWS-40F NX Networked Wireless Enabled Integral NXSMP2-HMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming 1,3,4 NXW NX Networked Wireless Radio Module NXRM2 and Bluetooth Programming, without Sensor 3,4 WIR LightGRID+ In-Fixture Module 3,4 WIRSC-14F LightGRID+ Module and Occupancy Sensor 14ft Mounting height 3,4 WIRSC-40F LightGRID+ Module and Occupancy Sensor 40ft Mounting height 3,4 Stand Alone Sensors BTS-14F Bluetooth® Programmable, BTSMP-LMO PIR Occupancy Sensor with Automatic Dimming Photocell and 360° Lens BTS-40F Bluetooth® Programmable, BTSMP-HMO PIR Occupancy Sensor with Automatic Dimming Photocell and 360° Lens BTSO-12F Bluetooth® Programmable, BTSMP-OMNI-O PIR Occupancy Sensor with Automatic Dimming Photocell and 360° Lens 7PR 7-Pin Receptacle 4 7PR-SC 7-Pin Receptacle with shorting cap 4 7PR-TL 7-Pin PCR with NEMA photocontrol 4 3PR 3-Pin Receptacle 4 3PR-SC 3-Pin receptacle with shorting cap 4 3PR-TL 3-Pin PCR with NEMA photocontrol 4 Programmed Controls SCP-_F Sensor Control Programmable, 8F or 40F 9 ADD AutoDim Timer Based Dimming 10 ADT AutoDim Time of Day Dimming 10 CATALOG # DATE: LOCATION: TYPE: PROJECT: CATALOG #: VP ––– – – ––– Series Optic Platform Size Light Engine CCT/CRI Distribution Optic Rotation Voltage VP Viper Area BLANK Micro Strike 1 Size 1 2 Size 2 3 Size 3 4 Size 4 160L-35 6 35W - 5,500 Lumens 160L-50 6 50W - 7,500 Lumens 160L-75 75W - 10,000 Lumens 160L-100 100W - 12,500 Lumens 160L-115 115W - 15,000 Lumens 160L-135 135W - 18,000 Lumens 160L-160 160W - 21,000 Lumens 320L-145 145W - 21,000 Lumens 320L-170 170W - 24,000 Lumens 320L-185 185W - 27,000 Lumens 320L-210 210W - 30,000 Lumens 320L-235 235W - 33,000 Lumens 320L-255 255W - 36,000 Lumens 320L-315 6 315W - 40,000 Lumens 480L-285 285W - 40,000 Lumens 480L-320 320W - 44,000 Lumens 480L-340 340W - 48,000 Lumens 480L-390 390W - 52,000 Lumens 480L-425 425W - 55,000 Lumens 480L-470 470W - 60,000 Lumens 720L-435 435W - 60,000 Lumens 720L-475 475W - 65,000 Lumens 720L-515 515W - 70,000 Lumens 720L-565 6 565W - 75,000 Lumens 720L-600 6 600W - 80,000 Lumens CLO Custom Lumen Output 1 AP AP-Amber Phosphor Converted 27K8 2700K, 80 CRI 3K7 3000K, 70 CRI 3K8 3000K, 80 CRI 35K8 3500K, 80 CRI 3K9 3000K, 90 CRI 4K7 4000K, 70 CRI 4K8 4000K, 80 CRI 4K9 4000K, 90 CRI 5K7 5000K, 70 CRI 5K8 5000K, 80 CRI BLUE BLUE 450-455 nm 2 Type 2 3 Type 3 4F Type 4 Forward 4W Type 4 Wide 5QW Type 5 Square Wide BLANK No Rotation L Optic rotation left R Optic rotation right UNV 120-277V 120 120V 208 208V 240 240V 277 277V 347 347V 480 480V 1 – Items with a grey background can be done as a custom order. Contact brand representative for more information 2 – Replace “_” with “3” for 3.5”-4.13” OD pole, “4” for 4.18”-5.25” OD pole, “5” for 5.5”-6.5” OD pole 3 – Networked Controls cannot be combined with other control options 4 – Not available with 2PF option 5 – Not available with Dual Driver option 6 – Some voltage restrictions may apply when combined with controls 7 – Not available with 480V 8 – BC not available on 4F and type 5 distributions 9 – At least one SCPREMOTE required to program SCP motion sensor. Must select 8ft or 40ft. 10 - Please refer to page 8 for AutoDim ordering guide Example: VP–2–320L-145–3K7–2–R–UNV–A3–BLT = Service Program Limit of 15 luminairesGray Shading MICROSTRIKE OPTICS – ORDERING GUIDE Page 2 of 15 Rev 04/16/25 BEA_VIPERSPEC_R17 VIPER Area/Site VIPER LUMINAIRE currentlighting.com/beacon © 2024-2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions.