HomeMy WebLinkAbout06 60 00.docMATT THE MILLER’S; CARMEL CITY CENTER; SUITE 101
06 49 19 -
CARMEL CITY CENTER Issue Date 03.26.12 PLASTIC FABRICATIONS
MATT THE MILLER’S; CARMEL CITY CENTER; SUITE 101
SECTION 06 60 00 – PLASTIC FABRICATIONS
PART 1 - GENERAL
1.1 SUMMARY:
A. Types of plastic fabrications include:
1. Exterior Running Trim, Flat Panels.
2. Frieze, cornice, dentil, mouldings, and miscellaneous shapes
1.2 DEFINITIONS:
A. Prefabricated architectural millwork consisting of moulded urethane components as
specified herein and as shown on drawings.
1.3 SUBMITTALS:
A. Product Data: Submit fabricator’s technical data covering materials, fabrication
process, coating requirements, storage, handling and installation.
B. Shop Drawings: Submit shop drawings showing components and configuration
delineated on drawings.
1.4 QUALITY ASSURANCE:
A. Warranty:
1. Exterior Running Trim, and Flat Panels: Provide a manufacturer’s warranty for
material defects, material failure, or other material deterioration for a period of not
less than twenty-five (25) years from date of Substantial Completion.
B. Single Source Responsibility for Plastic Fabrications: Provide components and
accessories from a single manufacturer.
PART 2 - PRODUCTS
2.1 EXTERIOR RUNNING TRIM MANUFACTURER:
A. Exterior Running Trim, and Flat Panel fabrications to be supplied by Azek Trimboards;
801 Corey Street, Moosic, Pennsylvania 18507; (866) 549-6900 www.azek.com
1. Cellular PVC trim with a density of .55 grams per cubic centimeter.
2. Supplied without painted finish, white. Painting not necessary.
B. Substitutions of equal size, scale, proportions, and construction techniques are
permitted only with prior approval of Architect
C. Running Trim Components: Location and extent shown on drawings.
1. Manufacturer: Azek Trimboards.
2. Running Trim: Azek Trimboard 5/4” x width indicated on drawings
3. Running Trim: Azek Trimboard 1” x width indicated on drawings
4. Flat Panels: 3/4” Azek Sheet maximum size (4’ x 20’)
MATT THE MILLER’S; CARMEL CITY CENTER; SUITE 101
06 49 19 -
CARMEL CITY CENTER Issue Date 03.26.12 PLASTIC FABRICATIONS
MATT THE MILLER’S; CARMEL CITY CENTER; SUITE 101
D. Finishes: Prefinished white. Field Paint per Section 00 91 00
E. Accessories: Azek adhesive
PART 3 - EXECUTION
3.1 INSTALLATION:
A. Install per manufacturer’s published recommendations.
B. All joints and seams between adjacent components to be smooth, hairline seams.
C. Reject all components with imperfections, damages, or other irregularities.
D. Coordinate the placement and spacing of plastic fabrications to avoid conflicts with
other work.
E. Running trimboard and cornerboards (5/4 inch thick) installed as part of the lap siding
work, shall be placed flush with wall sheathing. Fiber cement siding boards shall be cut
to butt against trim. Butt joint width to be maintained for proper sealant application. See
Section 07460.
END OF SECTION 06 60 00