HomeMy WebLinkAbout10 28 00.docMATT THE MILLER’S; CARMEL CITY CENTER; SUITE 101
10 28 00 -
CARMEL CITY CENTER Date 03.26.12 TOILET AND BATH ACCESSORIES
MATT THE MILLER’S; CARMEL CITY CENTER; SUITE 101
SECTION 10 28 00 – TOILET AND BATH ACCESSORIES
PART 1 - GENERAL
1.1 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General and Supplementary
Conditions and Division 01 Specification Sections, apply to this Section.
1.2 SUMMARY
A. Section Includes:
1. Public-use washroom accessories.
2. Childcare accessories.
3. Under-lavatory guards.
4. Custodial accessories.
B. Owner-Furnished Material: Mirrors.
C. Related Sections:
1. Section 08 83 00 "Mirrors.”
2. Section 09 30 00 "Tiling" for ceramic toilet and bath accessories.
1.3 ACTION SUBMITTALS
A. Product Data: For each type of product indicated. Include the following:
1. Construction details and dimensions.
2. Anchoring and mounting requirements, including requirements for cutouts in other work
and substrate preparation.
3. Material and finish descriptions.
4. Features that will be included for Project.
5. Manufacturer's warranty.
B. Samples: Full size, for each accessory item to verify design, operation, and finish requirements.
1. Approved full-size Samples will be returned and may be used in the Work.
C. Product Schedule: Indicating types, quantities, sizes, and installation locations by room of each
accessory required.
1. Identify locations using room designations indicated.
2. Identify products using designations indicated.
1.4 INFORMATIONAL SUBMITTALS
A. Warranty: Sample of special warranty.
MATT THE MILLER’S; CARMEL CITY CENTER; SUITE 101
10 28 00 -
CARMEL CITY CENTER Date 03.26.12 TOILET AND BATH ACCESSORIES
MATT THE MILLER’S; CARMEL CITY CENTER; SUITE 101
1.5 CLOSEOUT SUBMITTALS
A. Maintenance Data: For toilet and bath accessories to include in maintenance manuals.
1.6 QUALITY ASSURANCE
A. Source Limitations: For products listed together in the same Part 2 articles, obtain products
from single source from single manufacturer.
B. Electrical Components, Devices, and Accessories: Listed and labeled as defined in NFPA 70,
by a qualified testing agency, and marked for intended location and application.
1.7 COORDINATION
A. Coordinate accessory locations with other work to prevent interference with clearances required
for access by people with disabilities, and for proper installation, adjustment, operation,
cleaning, and servicing of accessories.
B. Deliver inserts and anchoring devices set into concrete or masonry as required to prevent
delaying the Work.
1.8 WARRANTY
A. Special Mirror Warranty: Manufacturer's standard form in which manufacturer agrees to replace
mirrors that develop visible silver spoilage defects and that fail in materials or workmanship
within specified warranty period.
1. Warranty Period: 15 years from date of Substantial Completion.
PART 2 - PRODUCTS
2.1 MATERIALS
A. Stainless Steel: ASTM A 666, Type 304, 0.031-inch minimum nominal thickness unless
otherwise indicated.
B. Brass: ASTM B 19, flat products; ASTM B 16, rods, shapes, forgings, and flat products with
finished edges; or ASTM B 30, castings.
C. Steel Sheet: ASTM A 1008, Designation CS (cold rolled, commercial steel), 0.036-inch
minimum nominal thickness.
D. Galvanized-Steel Sheet: ASTM A 653, with G60 hot-dip zinc coating.
E. Galvanized-Steel Mounting Devices: ASTM A 153, hot-dip galvanized after fabrication.
F. Fasteners: Screws, bolts, and other devices of same material as accessory unit and tamper-
and-theft resistant where exposed, and of galvanized steel where concealed.
MATT THE MILLER’S; CARMEL CITY CENTER; SUITE 101
10 28 00 -
CARMEL CITY CENTER Date 03.26.12 TOILET AND BATH ACCESSORIES
MATT THE MILLER’S; CARMEL CITY CENTER; SUITE 101
G. Chrome Plating: ASTM B 456, Service Condition Number SC 2 (moderate service).
H. Mirrors: ASTM C 1503, Mirror Glazing Quality, clear-glass mirrors, nominal 6.0 mm thick.
I. ABS Plastic: Acrylonitrile-butadiene-styrene resin formulation.
2.2 PUBLIC-USE WASHROOM ACCESSORIES
A. Manufacturers: Subject to compliance with requirements, provide products by manufacturer
indicated.
B. Toilet Tissue (Roll) Dispenser:
1. Manufacturer: Bobrick.
2. Description: Roll-in-reserve dispenser with hinged front secured with tumbler lockset.
3. Mounting: Surface mounted.
4. Operation: Non-control delivery with theft-resistant spindle.
5. Capacity: Designed for 4-1/2- or 5-inch- diameter tissue rolls.
6. Material and Finish: Stainless steel, No. 4 finish (satin).
C. Paper Towel Dispenser:
1. Provided by Owner.
D. Waste Receptacle:
1. Provided by Owner.
E. Liquid-Soap Dispenser:
1. Provided by Owner.
F. Grab Bar:
1. Manufacturer: Bobrick.
2. Mounting: Flanges with concealed fasteners.
3. Material: Stainless steel, 0.05 inc thick.
a. Finish: Smooth, No. 4 finish (satin).
4. Outside Diameter: 1-1/4 inches.
5. Configuration and Length: Straight, 36 inches long.
G. Grab Bar:
1. Manufacturer: Bobrick.
2. Mounting: Flanges with concealed fasteners.
3. Material: Stainless steel, 0.05 inch thick.
a. Finish: Smooth, No. 4 finish (satin).
4. Outside Diameter: 1-1/4 inches.
5. Configuration and Length: Straight, 42 inches long.
H. Grab Bar:
1. Manufacturer: Bobrick.
2. Mounting: Flanges with concealed fasteners.
3. Material: Stainless steel, 0.05 inch thick.
a. Finish: Smooth, No. 4 finish (satin).
4. Outside Diameter: 1-1/4 inches.
5. Configuration and Length: Straight, 18 inches long.
MATT THE MILLER’S; CARMEL CITY CENTER; SUITE 101
10 28 00 -
CARMEL CITY CENTER Date 03.26.12 TOILET AND BATH ACCESSORIES
MATT THE MILLER’S; CARMEL CITY CENTER; SUITE 101
I. Sanitary-Napkin Disposal Unit:
1. Manufacturer: Bobrick.
2. Mounting: Surface mounted.
3. Door or Cover: Self-closing, disposal-opening cover and hinged face panel with tumbler
lockset.
4. Receptacle: Removable.
5. Material and Finish: Stainless steel, No. 4 finish (satin).
2.3 CHILDCARE ACCESSORIES
A. Manufacturers: Subject to compliance with requirements, provide products by manufacturer
indicated.
B. Diaper-Changing Station:
1. Refer to Rest Room Accessory Schedule on Drawings..
2. Description: Horizontal unit that opens by folding down from stored position and with
child-protection strap.
a. Engineered to support a minimum of 250-lb static load when opened.
3. Mounting: Surface mounted, with unit projecting not more than 4 inches from wall when
closed.
4. Operation: By pneumatic shock-absorbing mechanism.
5. Material and Finish: HDPE in manufacturer's standard color.
6. Liner Dispenser: Built in.
2.4 UNDERLAVATORY GUARDS
A. Underlavatory Guard:
1. Refer to Drawings
2. Description: Flat panel.
3. Material and Finish: Anti-microbial, plastic laminate on plywood.
2.5 CUSTODIAL ACCESSORIES
A. Utility Shelf:
1. Basis-of-Design Product: Bradley.
2. Description: With exposed edges turned down not less than 1/2 inch and supported by
two triangular brackets welded to shelf underside.
3. Size: 16 inches long by 6 inches deep.
4. Material and Finish: Not less than nominal 0.05-inch- thick stainless steel, No. 4 finish
(satin).
B. Mop and Broom Holder:
1. Basis-of-Design Product: Bradley.
2. Description: Unit with shelf, hooks, holders, and rod suspended beneath shelf.
3. Length: 36 inches.
4. Hooks: Three.
5. Mop/Broom Holders: Four, spring-loaded, rubber hat, cam type.
6. Material and Finish: Stainless steel, No. 4 finish (satin).
a. Shelf: Not less than nominal 0.05-inch- thick stainless steel.
b. Rod: Approximately 1/4-inch- diameter stainless steel.
MATT THE MILLER’S; CARMEL CITY CENTER; SUITE 101
10 28 00 -
CARMEL CITY CENTER Date 03.26.12 TOILET AND BATH ACCESSORIES
MATT THE MILLER’S; CARMEL CITY CENTER; SUITE 101
C. Paper Towel Dispenser:
1. Provided by Owner.
D. Liquid-Soap Dispenser :
1. Provided by Owner.
2.6 FABRICATION
A. General: Fabricate units with tight seams and joints, and exposed edges rolled. Hang doors
and access panels with full-length, continuous hinges. Equip units for concealed anchorage
and with corrosion-resistant backing plates.
B. Keys: Provide universal keys for internal access to accessories for servicing and resupplying.
Provide minimum of six keys to Owner's representative.
PART 3 - EXECUTION
3.1 INSTALLATION
A. Install accessories according to manufacturers' written instructions, using fasteners appropriate
to substrate indicated and recommended by unit manufacturer. Install units level, plumb, and
firmly anchored in locations and at heights indicated.
B. Grab Bars: Install to withstand a downward load of at least 250 lbf, when tested according to
ASTM F 446.
3.2 ADJUSTING AND CLEANING
A. Adjust accessories for unencumbered, smooth operation. Replace damaged or defective items.
B. Remove temporary labels and protective coatings.
C. Clean and polish exposed surfaces according to manufacturer's written recommendations.
END OF SECTION 10 28 00