HomeMy WebLinkAboutW110810014 02/11
tl111
architectural half-moon, full cutoff Wall Pack
model number:
accessories:
type:
Job:
approvals:
COMPLIANT
SPECIFICATIONS ARE SUBJECT
TO CHANGE WITHOUT NOTICE
PRODUCt SPECIFICAtIONS
conStruction
the trace-lite tl111 Series features a durable, die-cast aluminum enclosure with an
architectural bronze powder coated finish. enclosure is fully sealed and gasketed,
and is Wet location listed for outdoor use. enclosure and hardware are corrosion
resistant. the tl111 features an internal, anodized aluminum reflector which
provides ideal light distribution, optional uP/DoWn light distribution is also available.
the lamp(s) are protected by a high-impact, heat resistant tempered glass lens.
lamPS & BallaStS
high Pressure Sodium: B17 type lamps from 35 to 150 watts, utilizing a medium
base, glazed porcelain socket pulse rated for 4kV with either a r-nPf or hX-hPf type
ballast rated for a minimum operating temperature of -30oc (-22of) and 120Vac,
Double-tap (120/277Vac), multi-tap (120/208/240/277Vac) or 480Vac input.
metal halide: BD17 type lamps from 100 watts, utilizing a medium base, glazed
porcelain socket pulse rated for 4kV with an hX-hPf ballast rated for a minimum
operating temperature of -30oc (-22of) and Double-tap (120277Vac), multi-tap
(120/208/240/277Vac) or 480Vac input.
Pulse Start metal halide: BD17 type lamps from 150 to 250 watts, utilizing a
medium base, glazed porcelain socket pulse rated for 4kV with a cWa ballast
rated for a minimum operating temperature of -30oc (-22of) and multi-tap
(120/208/240/277Vac) or 480Vac input.
inStallation
the trace-lite tl111 Series is ideal for mounting to any vertical surface and features
a rugged, die-cast aluminum mounting plate. can be wired to a 4’’ junction box.
can be mounted in an inverted position in Damp locations onlY.
WarrantY
any housing component that fails due to manufacturer’s defect
is guaranteed for two years from time of shipment. Ballasts, capacitors, and ignitors
are warrantied for one year from time of shipment. Warranty does not apply to
damages caused by improper installation, abuse, fire or acts of God. lamp is not
covered by manufacturer’s warranty.
ORDERING INFORMAtION
SERIES LAMP WATTS OPTIONS
(Factory Installed)VOLTS
tl111
mh = metal halide
PSmh = Pulse Start metal halide
hPS = high Pressure Sodium
uD5 = up/Down light Distribution
SZXXX6 = Single line Side fuse (Specify 120 or 277V)
DZXXX6 = Double line Side fuse (Specify 208, 240, or 480V)
uSa = meets Buy america requirements
ACCESSORIES7
(Field Installed)
Pc1 = 120V Photocontrol
Pc2 = 208-277V Photocontrol
tl111 PSMh 150 DZ208Mt PC2
metal halide
50 = 50W
70 = 70W
100 = 100W
Pulse Start metal halide
150 = 150W
high Pressure Sodium
35 = 35W
50 = 50W
70 = 70W
100 = 100W
150 = 150W
1201 = 120V
Dt2 = 120/277V
mt3 = 120/208/240/277V
4804 = 480V
1 hPS lamps only
2 50 Watt mh or hPS lamps only
3 not available on 35-50 Watt
4 100-150 Watt lamps only
5 not Dark Sky compliant
6 Specify Voltage
7 order as Separate line item
the tl111 Series is an architectural, cutoff wallpack that is
ideal for parking areas, entrances, walkways, underpasses,
loading docks, tunnels, and recreation areas. available with
metal halide, Pulse Start metal halide or high Pressure Sodium
lamps for any application.
PhOtOMEtRICS
Footcandle Correction
multiply factors times the footcandle values for changes in lamp type.
lamps 50W mh 100W mh 150W PSMh 150W hPS
Factor .24 .68 1.00 1.20
approximate Weight: 14 lbs.
DIMENSIONS
1911 West Parkside Lane • Phoenix, AZ 85027
888.533.3948 • 623.580.3948 • Fax: 623.580.8948
www.barronltg.com